Universal xlr

Type Audio Midi Interfaces Product Description 18x8 USB 2.0 audio interface with four Focusrite preamps. With four award-winning Focusrite preamps, the 18i8 is designed for producers and recording artist that demand a significant number of inputs to track multiple sources at the same time. The 18i8 boasts 18 separate inputs and 8 independent outputs, all housed in a rugged aluminum exterior with input controls and signal halos to keep incoming signals honest. Focusrite: Over 25 years of audio excellence Focusrite was commissioned to make its first ‘no-holds-barred’ microphone preamps by Sir George Martin for his Air Studio facility in London. Over the following 25 years Focusrite has designed some of the finest mic preamps in the music industry, and in recent years has developed a series of best-selling audio interfaces for people who really care about sound. 18 separate inputs At the heart of 18i8 is a set of four Focusrite mic preamps with up to 60dB gain, designed specifically for Focusrite’s computer audio interfaces. The first two offer Mic/Line/Instrument on universal XLR/TRS connectors while 3 and 4 offer Mic/Line capability on universal XLRs – all four on the front panel with pads and 48V phantom power. Four more line inputs are provided on TRS connectors. An ADAT optical digital connector provides eight additional digital inputs that can also be used with external mic preamps like Focusrite's OctoPre Mk II to increase the number of mic inputs the 18i8 can handle to 12. A stereo S/PDIF coaxial input is also included.8 independent outputsOn the output side, there are two TRS monitor outputs, stereo S/PDIF coax, and two independent stereo headphone outputs, each with their own volume knob so artist and engineer can control their own personal monitoring. All analogue inputs and outputs have their own connectors, so no breakout cables are required, and all feature Focusrite precision 24-bit, 96kHz sampling A/D and D/A conversion to get the most accurate signal possible into and out of recording applications on Windows®, Mac® and now iOS® apps. Tough and innovative hardware Scarlett 18i8 is housed in a compact red unibody metal case to withstand the rigours of the road – and the studio. Input level controls feature signal halos – LED rings around the level control that give a simple and immediate go/no-go level indication: green means there is a recordable signal while red indicates overload. A large main monitor knob with mute button means that main monitor levels are always at your fingertips. Included software Included in the package is the Scarlett MixControl low-latency DSP-based software mixer and router, with intuitive one-click presets and a latency of under 1.4 ms. You’ll also find the Scarlett plug-in suite for VST, AU and RTAS, offering EQ, gate, compression and reverb, plus Ableton Live Lite, the Novation Bass Station soft synth and a Loopmasters sample pack. Features 18 Inputs and 8 outputs Four award-winning Focusrite mic pres with 25-years of design experience All of the analogue and digital inputs you need for home multi-track recording Two independent headphone outputs each with a level control Rugged metal unibody chassis High quality 24bit 96KHz audio interface for Mac, PC and iPad Unique gain halos for safeguarding your levels Scarlett MixControl ultra-low-latency DSP mixer and router Main monitor control with mute function Includes Ableton Live Lite, the Scarlett Plug-in Suite, the Novation Bass Station soft synth and Loopmasters sample content Specifications Scarlett 18i8 Audio Interface Specifications: System Requirements Mac OS X 10.7 OS x 10.8 PC Windows 7 (all versions) Windows 8 (all versions apart from RT) IN 2 Mic/line/inst Combi XLR Including 2 instrument inputs 2 Mic/line Combi XLR Not including instrument inputs 4 Line analogue ¼” TRS jack On rear panel 2 S/PDIF RCA phono N/A 8 ADAT Optical Lightpipe 4 channels via 96kHz SMUX 16 MIDI 5 pin DIN connector Provides 16 channels of MIDI OUT 4 Line ¼” TRS Jack On rear panel 4 (2 stereo) Headphone outputs ¼” TRS Jack 2 dedicated level dials 2 S/PDIF RCA phono N/A 16 MIDI 5 pin DIN connector Provides 16 channels of MIDI

Type Audio Midi Interfaces 18x8 USB 2.0 audio interface with four Focusrite preamps. With four award-winning Focusrite preamps, the 18i8 is designed for producers and recording artist that demand a significant number of inputs to track multiple sources at the same time. The 18i8 boasts 18 separate inputs and 8 independent outputs, all housed in a rugged aluminum exterior with input controls and signal halos to keep incoming signals honest. Focusrite: Over 25 years of audio excellence Focusrite was commissioned to make its first ‘no-holds-barred’ microphone preamps by Sir George Martin for his Air Studio facility in London. Over the following 25 years Focusrite has designed some of the finest mic preamps in the music industry, and in recent years has developed a series of best-selling audio interfaces for people who really care about sound. 18 separate inputs At the heart of 18i8 is a set of four Focusrite mic preamps with up to 60dB gain, designed specifically for Focusrite’s computer audio interfaces. The first two offer Mic/Line/Instrument on universal XLR/TRS connectors while 3 and 4 offer Mic/Line capability on universal XLRs – all four on the front panel with pads and 48V phantom power. Four more line inputs are provided on TRS connectors. An ADAT optical digital connector provides eight additional digital inputs that can also be used with external mic preamps like Focusrite's OctoPre Mk II to increase the number of mic inputs the 18i8 can handle to 12. A stereo S/PDIF coaxial input is also included.8 independent outputsOn the output side, there are two TRS monitor outputs, stereo S/PDIF coax, and two independent stereo headphone outputs, each with their own volume knob so artist and engineer can control their own personal monitoring. All analogue inputs and outputs have their own connectors, so no breakout cables are required, and all feature Focusrite precision 24-bit, 96kHz sampling A/D and D/A conversion to get the most accurate signal possible into and out of recording applications on Windows®, Mac® and now iOS® apps. Tough and innovative hardware Scarlett 18i8 is housed in a compact red unibody metal case to withstand the rigours of the road – and the studio. Input level controls feature signal halos – LED rings around the level control that give a simple and immediate go/no-go level indication: green means there is a recordable signal while red indicates overload. A large main monitor knob with mute button means that main monitor levels are always at your fingertips. Included software Included in the package is the Scarlett MixControl low-latency DSP-based software mixer and router, with intuitive one-click presets and a latency of under 1.4 ms. You’ll also find the Scarlett plug-in suite for VST, AU and RTAS, offering EQ, gate, compression and reverb, plus Ableton Live Lite, the Novation Bass Station soft synth and a Loopmasters sample pack. Features 18 Inputs and 8 outputs Four award-winning Focusrite mic pres with 25-years of design experience All of the analogue and digital inputs you need for home multi-track recording Two independent headphone outputs each with a level control Rugged metal unibody chassis High quality 24bit 96KHz audio interface for Mac, PC and iPad Unique gain halos for safeguarding your levels Scarlett MixControl ultra-low-latency DSP mixer and router Main monitor control with mute function Includes Ableton Live Lite, the Scarlett Plug-in Suite, the Novation Bass Station soft synth and Loopmasters sample content Specifications Scarlett 18i8 Audio Interface Specifications: System Requirements Mac OS X 10.7 OS x 10.8 PC Windows 7 (all versions) Windows 8 (all versions apart from RT) IN 2 Mic/line/inst Combi XLR Including 2 instrument inputs 2 Mic/line Combi XLR Not including instrument inputs 4 Line analogue ¼” TRS jack On rear panel 2 S/PDIF RCA phono N/A 8 ADAT Optical Lightpipe 4 channels via 96kHz SMUX 16 MIDI 5 pin DIN connector Provides 16 channels of MIDI OUT 4 Line ¼” TRS Jack On rear panel 4 (2 stereo) Headphone outputs ¼” TRS Jack 2 dedicated level dials 2 S/PDIF RCA phono N/A 16 MIDI 5 pin DIN connector Provides 16 channels of MIDI

18x8 USB 2.0 audio interface with four Focusrite preamps. With four award-winning Focusrite preamps, the 18i8 is designed for producers and recording artist that demand a significant number of inputs to track multiple sources at the same time. The 18i8 boasts 18 separate inputs and 8 independent outputs, all housed in a rugged aluminum exterior with input controls and signal halos to keep incoming signals honest. Focusrite: Over 25 years of audio excellence Focusrite was commissioned to make its first ‘no-holds-barred’ microphone preamps by Sir George Martin for his Air Studio facility in London. Over the following 25 years Focusrite has designed some of the finest mic preamps in the music industry, and in recent years has developed a series of best-selling audio interfaces for people who really care about sound. 18 separate inputs At the heart of 18i8 is a set of four Focusrite mic preamps with up to 60dB gain, designed specifically for Focusrite’s computer audio interfaces. The first two offer Mic/Line/Instrument on universal XLR/TRS connectors while 3 and 4 offer Mic/Line capability on universal XLRs – all four on the front panel with pads and 48V phantom power. Four more line inputs are provided on TRS connectors. An ADAT optical digital connector provides eight additional digital inputs that can also be used with external mic preamps like Focusrite's OctoPre Mk II to increase the number of mic inputs the 18i8 can handle to 12. A stereo S/PDIF coaxial input is also included.8 independent outputsOn the output side, there are two TRS monitor outputs, stereo S/PDIF coax, and two independent stereo headphone outputs, each with their own volume knob so artist and engineer can control their own personal monitoring. All analogue inputs and outputs have their own connectors, so no breakout cables are required, and all feature Focusrite precision 24-bit, 96kHz sampling A/D and D/A conversion to get the most accurate signal possible into and out of recording applications on Windows®, Mac® and now iOS® apps. Tough and innovative hardware Features 18 Inputs and 8 outputs Four award-winning Focusrite mic pres with 25-years of design experience All of the analogue and digital inputs you need for home multi-track recording Two independent headphone outputs each with a level control Rugged metal unibody chassis High quality 24bit 96KHz audio interface for Mac, PC and iPad Unique gain halos for safeguarding your levels Scarlett MixControl ultra-low-latency DSP mixer and router Main monitor control with mute function Includes Ableton Live Lite, the Scarlett Plug-in Suite, the Novation Bass Station soft synth and Loopmasters sample content Specifications Scarlett 18i8 Audio Interface Specifications: System Requirements Mac OS X 10.7 OS x 10.8 PC Windows 7 (all versions) Windows 8 (all versions apart from RT) IN 2 Mic/line/inst Combi XLR Including 2 instrument inputs 2 Mic/line Combi XLR Not including instrument inputs 4 Line analogue ¼” TRS jack On rear panel 2 S/PDIF RCA phono N/A 8 ADAT Optical Lightpipe 4 channels via 96kHz SMUX 16 MIDI 5 pin DIN connector Provides 16 channels of MIDI OUT 4 Line ¼” TRS Jack On rear panel 4 (2 stereo) Headphone outputs ¼” TRS Jack 2 dedicated level dials 2 S/PDIF RCA phono N/A 16 MIDI 5 pin DIN connector Provides 16 channels of MIDI Shop No. 345-D, 3rd Floor Star City Shopping Mall, Opp,Bambino Cinema Abdullah Haroon Road Saddar Karachi Pakistan

18x8 USB 2.0 audio interface with four Focusrite preamps. With four award-winning Focusrite preamps, the 18i8 is designed for producers and recording artist that demand a significant number of inputs to track multiple sources at the same time. The 18i8 boasts 18 separate inputs and 8 independent outputs, all housed in a rugged aluminum exterior with input controls and signal halos to keep incoming signals honest. 18 separate inputs At the heart of 18i8 is a set of four Focusrite mic preamps with up to 60dB gain, designed specifically for Focusrite's computer audio interfaces. The first two offer Mic/Line/Instrument on universal XLR/TRS connectors while 3 and 4 offer Mic/Line capability on universal XLRs - all four on the front panel with pads and 48V phantom power. Four more line inputs are provided on TRS connectors. An ADAT optical digital connector provides eight additional digital inputs that can also be used with external mic preamps like Focusrite's OctoPre Mk II to increase the number of mic inputs the 18i8 can handle to 12. A stereo S/PDIF coaxial input is also included. 8 independent outputs On the output side, there are two TRS monitor outputs, stereo S/PDIF coax, and two independent stereo headphone outputs, each with their own volume knob so artist and engineer can control their own personal monitoring. All analogue inputs and outputs have their own connectors, so no breakout cables are required, and all feature Focusrite precision 24-bit, 96kHz sampling A/D and D/A conversion to get the most accurate signal possible into and out of recording applications on Windows, Mac and now iOS apps. Tough and innovative hardware Scarlett 18i8 is housed in a compact red unibody metal case to withstand the rigours of the road - and the studio. Input level controls feature signal halos - LED rings around the level control that give a simple and immediate go/no-go level indication: green means there is a recordable signal while red indicates overload. A large main monitor knob with mute button means that main monitor levels are always at your fingertips. Included software Included in the package is the Scarlett MixControl low-latency DSP-based software mixer and router, with intuitive one-click presets and a latency of under 1.4 ms. You'll also find the Scarlett plug-in suite for VST, AU and RTAS, offering EQ, gate, compression and reverb, plus Ableton Live Lite, the Novation Bass Station soft synth and a Loopmasters sample pack. Includes the Focusrite Red 2 and Red 3 Plug-In Suite (AAX/AU/VST) upon registration of interface. Accurately modeled on the classic Red 2 EQ and Red 3 Compressor, the Red plug-ins let you exploit the sound of the hardware originals, conveniently from within Pro Tools (10 and above) and other audio software. FEATURES 18 Inputs and 8 outputs Four award-winning Focusrite mic pres with 25-years of design experience All of the analogue and digital inputs you need for home multi-track recording Two independent headphone outputs each with a level control Rugged metal unibody chassis High quality 24bit 96KHz audio interface for Mac, PC and iPad Unique gain halos for safeguarding your levels Scarlett MixControl ultra-low-latency DSP mixer and router Main monitor control with mute function Includes Ableton Live Lite, the Scarlett Plug-in Suite, the Novation Bass Station soft synth and Loopmasters sample content SPECIFICATIONS Scarlett 18i8 Audio Interface System Requirements Mac OS X 10.7 OS x 10.8 PC Windows 7 (all versions) Windows 8 (all versions apart from RT) IN 2 Mic/line/inst Combi XLR Including 2 instrument inputs 2 Mic/line Combi XLR Not including instrument inputs 4 Line analogue ¼" TRS jack On rear panel 2 S/PDIF RCA phono N/A 8 ADAT Optical Lightpipe 4 channels via 96kHz SMUX 16 MIDI 5 pin DIN connector Provides 16 channels of MIDI OUT 4 Line ¼" TRS Jack On rear panel 4 (2 stereo) Headphone outputs ¼" TRS Jack 2 dedicated level dials 2 S/PDIF RCA phono N/A 16 MIDI 5 pin DIN connector Provides 16 channels of MIDI

ENRG 48V Phantom Power Supply with Adapter Power for Phantom XLR 3 Pin Microphone Cable for Any Condenser Microphone Music Recording Equipment - Black Input Voltage: 110V Delivers reliable 48V phantom power for condenser microphones and transfer sound signal to sound card in a compact, durable, plastic housing. Universal XLR input and output, compatible with all kinds of microphone music recording equipment.Comes with one XLR audio cable with high quality XLR male and female connectors. Features a single channel unit with balanced mic inputs and outputs to connect in-line with your mic and mixer. On/off power switch and LED indicator for ease of operation. One Adapter is included. Simple to use and ideal for stage and studio use.

Type Audio Midi Interfaces Product Description Robust 2 in, 4 out USB powered recording interface. The Focusrite Scarlett 2i4 is a robust 2 in / 4 out USB recording interface that combines affordability, cross-platform operation, a comprehensive feature set and the best audio performance in its class. It’s a perfect match for both the musician and the digital DJ – and it comes in an elegant, road-ready anodized aluminum unibody case.Scarlett 2i4 is a great tool for any musician, with its two award-winning Focusrite microphone/line/instrument preamps accessed via universal front-panel XLR/TRS sockets, combined with professional 24-bit, 96kHz conversion, plus class-leading analogue and digital design from input to output to ensure pristine audio quality throughout the signal path.With its 48V phantom power capability, Scarlett 2i4 is perfect for recording guitar, vocal, or even stereo piano, with high-quality condenser mics. You will love the direct monitoring mode, which removes the latencies associated with listening back to the input signal through the DAW. You can record into the DAW in real time, whilst hearing a zero latency monitor feed from their input sources, controlled by a single knob for easy blending between direct monitoring and DAW playback. In common with other interfaces in the Scarlett series, input level controls feature a novel LED “signal halo” around the knob that indicates signal presence (green) and input overload (red), while a large-diameter silver volume knob gives you full and accurate control over monitor levels at all times, so whether you are mixing your music, or listening back to the track, the levels will always be in your control.Alongside the two Focusrite preamps are four RCA phono outputs, two of which are also available on balanced TRS sockets. These, coupled with the high-level headphone output and flexible monitoring capability make Scarlett 2i4 ideal for digital DJs. Send outputs 1 & 2 to the main PA and use 3 & 4 for cueing, or send all four to a mixer. The converter performance ensures that the quality of the audio streamed from the computer is sonically superb. An A/B source switch for monitoring either of two stereo output pairs via the high-level headphone output provide everything that’s required from a DJ interface.MIDI input and output are included in Scarlett 2i4, allowing capture of performances with MIDI keyboards and controllers and the ability to play parts out to instruments and sound modules, recording their audio via 2i4’s TRS inputs.Scarlett 2i4 comes complete with an excellent package of software tools to help you get your music down straight away. The latest version of the Focusrite Scarlett Plug-in Suite includes Compressor, Reverb, Gate and EQ in the form of VST/AU/RTAS plug-ins. Focusrite’s established Xcite+ bundle is also included, which features Ableton Live Lite (for all your production, performance and compositional needs), Novation’s Bass Station soft synth and over 1GB of royalty-free samples from Loopmasters.Scarlett 2i4 delivers high quality, 24-bit 96kHz audio to and from both Macintosh and Windows computers with USB 2.0 capability – and it’s bus powered so you only need to plug in the included USB cable to start making music. Features Dual mic/line/hi-Z instrument inputs on universal XLR/TRS front-panel connectors Precision, quality conversion at up to 24-bit, 96kHz sampling Better than 105dB dynamic range on record and playback Operates solely on bus power Front-panel inputs and headphone out Switchable Phantom Power Switchable 10 dB pad on all inputs Rear panel balanced TRS outputs (1 & 2) and phono (1–4) Headphone monitor switched to hear either pair of outputs Mixer knob for direct monitoring, mixes between source and outputs 1 & 2 Large monitor level control MIDI in and out Anodized aluminum unibody chassis Scarlett 2i4 USB Audio Interface Specifications: Mic Frequency Response 20Hz - 20kHz +/- 0.1 dB THD+N Equivalent Input Noise (EIN) Gain Range +10dB to +55dB (0dB to +45dB when pad is engaged) Max Input Level +3.5dBu Line Frequency Response 20Hz - 20kHz +/- 0.1dB THD+N Noise -90 dBu (22 Hz/22KHz bandpass filter) Signal to Noise Ratio > 100dB Gain Range -10dB to +35dB (-20dB to +25dB when pad is engaged) Max Input Level +26dBu (at 1% THD+N) Instrument Frequency Response 20Hz - 20kHz +/- 0.1dB THD+N % (‘A’ weighted measured with 16dB input gain, -1dBFS at output and 22Hz/22kHz bandpass filter) Noise -87dBu (22Hz/22kHz bandpass filter) Gain Range +10dB to +55dB (0dB to +45dB when pad is engaged) Max Input Level +3dBu (+13dBu pad in) Analogue Output Performance Nominal Output Level 0dBFS = +10dBu, balanced 0dBFS = +5.5bBu, unbalanced Frequency Response 20Hz - 20kHz +/- 0.2dB THD+N Output Impedance Power Output into mW Digital Performance Clock sources Internal clock only A-D Dynamic Range 105dB 'A-weighted' (all inputs). Converter chipset A-D dynamic range 114dB D-A Dynamic Range 104dB 'A-weighted' (all outputs). Converter chipset D-A dynamic range 114dB Supported sample rates 44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz Crosstalk Input to Input Better than 90dB Output to Output Better than 90dB Input to Output Better than 85dB Input Metering Ring LED lit Green Signal present (-24 dBFS) Ring LED lit Red Signal overload (0dBFS), peak held for approximately 1 second Weight and Dimensions Height 48 mm Width 210 mm Depth 140 mm Weight 890 g

Product Description Robust 2 in, 4 out USB powered recording interface. The Focusrite Scarlett 2i4 is a robust 2 in / 4 out USB recording interface that combines affordability, cross-platform operation, a comprehensive feature set and the best audio performance in its class. It’s a perfect match for both the musician and the digital DJ – and it comes in an elegant, road-ready anodized aluminum unibody case.Scarlett 2i4 is a great tool for any musician, with its two award-winning Focusrite microphone/line/instrument preamps accessed via universal front-panel XLR/TRS sockets, combined with professional 24-bit, 96kHz conversion, plus class-leading analogue and digital design from input to output to ensure pristine audio quality throughout the signal path.With its 48V phantom power capability, Scarlett 2i4 is perfect for recording guitar, vocal, or even stereo piano, with high-quality condenser mics. You will love the direct monitoring mode, which removes the latencies associated with listening back to the input signal through the DAW. Features Dual mic/line/hi-Z instrument inputs on universal XLR/TRS front-panel connectors Precision, quality conversion at up to 24-bit, 96kHz sampling Better than 105dB dynamic range on record and playback Operates solely on bus power Front-panel inputs and headphone out Switchable Phantom Power Switchable 10 dB pad on all inputs Rear panel balanced TRS outputs (1 & 2) and phono (1–4) Headphone monitor switched to hear either pair of outputs Mixer knob for direct monitoring, mixes between source and outputs 1 & 2 Large monitor level control MIDI in and out Anodized aluminum unibody chassis Scarlett 2i4 USB Audio Interface Specifications: Mic Frequency Response 20Hz - 20kHz +/- 0.1 dB THD+N Equivalent Input Noise (EIN) Gain Range +10dB to +55dB (0dB to +45dB when pad is engaged) Max Input Level +3.5dBu Line Frequency Response 20Hz - 20kHz +/- 0.1dB THD+N Noise -90 dBu (22 Hz/22KHz bandpass filter) Signal to Noise Ratio > 100dB Gain Range -10dB to +35dB (-20dB to +25dB when pad is engaged) Max Input Level +26dBu (at 1% THD+N) Instrument Frequency Response 20Hz - 20kHz +/- 0.1dB THD+N % (‘A’ weighted measured with 16dB input gain, -1dBFS at output and 22Hz/22kHz bandpass filter) Noise -87dBu (22Hz/22kHz bandpass filter) Gain Range +10dB to +55dB (0dB to +45dB when pad is engaged) Max Input Level +3dBu (+13dBu pad in) Analogue Output Performance Nominal Output Level 0dBFS = +10dBu, balanced 0dBFS = +5.5bBu, unbalanced Frequency Response 20Hz - 20kHz +/- 0.2dB THD+N Output Impedance Power Output into mW Digital Performance Clock sources Internal clock only A-D Dynamic Range 105dB 'A-weighted' (all inputs). Converter chipset A-D dynamic range 114dB D-A Dynamic Range 104dB 'A-weighted' (all outputs). Converter chipset D-A dynamic range 114dB Supported sample rates 44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz Crosstalk Input to Input Better than 90dB Output to Output Better than 90dB Input to Output Better than 85dB Input Metering Ring LED lit Green Signal present (-24 dBFS) Ring LED lit Red Signal overload (0dBFS), peak held for approximately 1 second Weight and Dimensions Height 48 mm Width 210 mm Depth 140 mm Weight 890 g Shop No. 345-D, 3rd Floor Star City Shopping Mall, Opp,Bambino Cinema Abdullah Haroon Road Saddar Karachi Pakistan

Scarlett 18i8 USB 2.0 audio interface with four Focusrite mic pres The new Focusrite Scarlett 18i8 18-in/8-out interface extends the Scarlett range of USB 2.0 interfaces from Focusrite, each of which offers a series of high-quality inputs and outputs for different recording requirements. With four Focusrite mic pres, Scarlett 18i8 is designed for producers and recording artists or bands who require the ability to record a significant number of sources at the same time including multiple mics/instruments, with expansion capability enabling it to handle multiple studio recording requirements. Scarlett 18i8 works on Mac, PC and iPad (Apple Camera Connection Kit required for iPad). Focusrite: Over 25 years of audio excellence Focusrite was commissioned to make its first ‘no-holds-barred’ microphone preamps by Sir George Martin for his Air Studio facility in London. Over the following 25 years Focusrite has designed some of the finest mic preamps in the music industry, and in recent years has developed a series of best-selling audio interfaces for people who really care about sound. 18 separate inputs At the heart of 18i8 is a set of four Focusrite mic preamps with up to 60dB gain, designed specifically for Focusrite’s computer audio interfaces. The first two offer Mic/Line/Instrument on universal XLR/TRS connectors while 3 and 4 offer Mic/Line capability on universal XLRs – all four on the front panel with pads and 48V phantom power. Four more line inputs are provided on TRS connectors. An ADAT optical digital connector provides eight additional digital inputs that can also be used with external mic preamps like Focusrite's OctoPre Mk II to increase the number of mic inputs the 18i8 can handle to 12. A stereo S/PDIF coaxial input is also included. 8 independent outputs On the output side, there are two TRS monitor outputs, stereo S/PDIF coax, and two independent stereo headphone outputs, each with their own volume knob so artist and engineer can control their own personal monitoring. All analogue inputs and outputs have their own connectors, so no breakout cables are required, and all feature Focusrite precision 24-bit, 96kHz sampling A/D and D/A conversion to get the most accurate signal possible into and out of recording applications on Windows®, Mac® and now iOS® apps. Tough and innovative hardware Scarlett 18i8 is housed in a compact red unibody metal case to withstand the rigours of the road – and the studio. Input level controls feature signal halos – LED rings around the level control that give a simple and immediate go/no-go level indication: green means there is a recordable signal while red indicates overload. A large main monitor knob with mute button means that main monitor levels are always at your fingertips. Included software Included in the package is the Scarlett MixControl low-latency DSP-based software mixer and router, with intuitive one-click presets and a latency of under 1.4 ms. You’ll also find the Scarlett plug-in suite for VST, AU and RTAS, offering EQ, gate, compression and reverb, plus Ableton Live Lite, the Novation Bass Station soft synth and a Loopmasters sample pack. Features: USB 2.0 audio interface - 4 Focusrite XLR mic preamps with pads and 48V phantom power - 18 inputs and 8 outputs, including extra line inputs, ADAT and S/PDIF I/O, and MIDI I/O - 96 kHz/24-bit conversion for pristine audio quality - Main monitor control with mute function - Input level controls illuminate in red or green to indicate the quality of your audio signal - Scarlett MixControl low-latency DSP mixer and router - 2 headphone outputs with separate level controls - Includes Xcite+ Pack: Ableton Live Lite, Novation Bass Station software synth, and 1 GB of Loopmasters samples - Ships with Scarlett VST/AU/RTAS plug-in suite - Works with Mac, PC, and iPad - Rugged metal unibody chassis

Product Description Robust 2 in, 4 out USB powered recording interface. The Focusrite Scarlett 2i4 is a robust 2 in / 4 out USB recording interface that combines affordability, cross-platform operation, a comprehensive feature set and the best audio performance in its class. It’s a perfect match for both the musician and the digital DJ – and it comes in an elegant, road-ready anodized aluminum unibody case.Scarlett 2i4 is a great tool for any musician, with its two award-winning Focusrite microphone/line/instrument preamps accessed via universal front-panel XLR/TRS sockets, combined with professional 24-bit, 96kHz conversion, plus class-leading analogue and digital design from input to output to ensure pristine audio quality throughout the signal path.With its 48V phantom power capability, Scarlett 2i4 is perfect for recording guitar, vocal, or even stereo piano, with high-quality condenser mics. You will love the direct monitoring mode, which removes the latencies associated with listening back to the input signal through the DAW. Features Dual mic/line/hi-Z instrument inputs on universal XLR/TRS front-panel connectors Precision, quality conversion at up to 24-bit, 96kHz sampling Better than 105dB dynamic range on record and playback Operates solely on bus power Front-panel inputs and headphone out Switchable Phantom Power Switchable 10 dB pad on all inputs Rear panel balanced TRS outputs (1 & 2) and phono (1–4) Headphone monitor switched to hear either pair of outputs Mixer knob for direct monitoring, mixes between source and outputs 1 & 2 Large monitor level control MIDI in and out Anodized aluminum unibody chassis Scarlett 2i4 USB Audio Interface Specifications: Mic Frequency Response 20Hz - 20kHz +/- 0.1 dB THD+N Equivalent Input Noise (EIN) Gain Range +10dB to +55dB (0dB to +45dB when pad is engaged) Max Input Level +3.5dBu Line Frequency Response 20Hz - 20kHz +/- 0.1dB THD+N Noise -90 dBu (22 Hz/22KHz bandpass filter) Signal to Noise Ratio > 100dB Gain Range -10dB to +35dB (-20dB to +25dB when pad is engaged) Max Input Level +26dBu (at 1% THD+N) Instrument Frequency Response 20Hz - 20kHz +/- 0.1dB THD+N % (‘A’ weighted measured with 16dB input gain, -1dBFS at output and 22Hz/22kHz bandpass filter) Noise -87dBu (22Hz/22kHz bandpass filter) Gain Range +10dB to +55dB (0dB to +45dB when pad is engaged) Max Input Level +3dBu (+13dBu pad in) Analogue Output Performance Nominal Output Level 0dBFS = +10dBu, balanced 0dBFS = +5.5bBu, unbalanced Frequency Response 20Hz - 20kHz +/- 0.2dB THD+N Output Impedance Power Output into 32O 24mW Digital Performance Clock sources Internal clock only A-D Dynamic Range 105dB 'A-weighted' (all inputs). Converter chipset A-D dynamic range 114dB D-A Dynamic Range 104dB 'A-weighted' (all outputs). Converter chipset D-A dynamic range 114dB Supported sample rates 44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz Crosstalk Input to Input Better than 90dB Output to Output Better than 90dB Input to Output Better than 85dB Input Metering Ring LED lit Green Signal present (-24 dBFS) Ring LED lit Red Signal overload (0dBFS), peak held for approximately 1 second Weight and Dimensions Height 48 mm Width 210 mm Depth 140 mm Weight 890 g

Behringer TRUTH B1030A Active Monitor (Pair) 5.25″ Kevlar Woofer-1″ Dome Tweeter-Class A/B Amplifiers-XLR, RCA, and 1/4″ Inputs-Precision Crossover Network-Room Adjustment Controls-International Power Supply-Magnetically Shielded The B1030A from Behringer is an active 2-way studio monitor speaker, ideal for use in small home, project, or mobile studios. The cabinet houses a 5.25″ long-throw Kevlar woofer and an ultra-high resolution 1″ dome tweeter to provide crisp, natural audio with a wide frequency response. Advanced waveguide technology provides a wide sweet spot, providing great results no matter where the speaker is placed. For a strong, distortion-free performance, the monitor has dedicated Class A/B amplifiers for each driver; 50W for the bass and 25W for the treble. A high-precision crossover network ensures that each driver section performs to its maximum potential. The rear panel has XLR, RCA, and 1/4″ input connectors, letting you connect to virtually any sound system. A variety of controls on the rear panel let you adjust the monitor’s volume and tone, and even compensate for the speaker’s position within a room. The universal power supply makes it easy to use the monitor internationally, while magnetic shielding provides safe use near video monitors and other electronic devices. Compact design is ideal for use in small home, project, or mobile studios 5.25″ long-throw Kevlar woofer and an ultra-high resolution 1″ dome tweeter provide crisp, natural audio with a wide frequency response Rear bass port for extended low frequency response Advanced waveguide technology provides a wide sweet spot, providing great results no matter where the speaker is placed Dedicated Class A/B amplifiers for each driver (50W for the bass and 25W for the treble) provide a strong, distortion-free performance High-precision crossover network ensures that each driver section performs to its maximum potential XLR, RCA, and 1/4″ input connectors let you connect to virtually any sound system Rear-panel controls for volume, high and low frequency adjustment, and room placement let you tailor the speaker’s tone to your specific environment Universal power supply makes it easy to use the monitor internationally Magnetically shielded for safe use near video monitors

896mk3 Overview The 896mk3 audio interface delivers advanced design, high-end performance, superb sound, and universal "hybrid" FireWire/USB2 connectivity to your Mac or Windows computer. Hybrid FireWire / USB2 connectivity As a hybrid audio interface, the 896mk3 provides flexible connectivity to any Mac or PC via FireWire or high-speed USB 2.0, with eight channels of pristine 24-bit 192 kHz analog recording and playback, combined with sixteen channels of optical digital I/O, stereo AES/EBU, S/PDIF and separate analog main outs. Expand your system by connecting the 8pre mic input expander or other MOTU audio interfaces. IOAnalog 24-bit 192-kHz on XLR - 8 Mic preamps 24-bit 192-kHz on XLR/TRS combo 8 - Main outputs 24-bit 192kHz on bal XLR - stereo Headphone output* - stereo ADAT optical (digital)† 16 16 AES/EBU (digital) stereo stereo S/PDIF (digital) stereo stereo Total 28 32

Type Audio Midi Interfaces Product Description A 24-bit USB recording interface. The compact Alesis iO2 EXPRESS audio-recording interface is ideal for home studios and portable recording setups. The 2-channel USB interface for Mac and PC-based systems enables you to record at up to 24-bit resolution for input into virtually all DAW, recording, and performance software. The Alesis i02 EXPRESS recording interface is small enough to comfortably fit into your mobile recording rig, laptop bag, or backpack, yet it contains high-quality components and circuitry suitable for the studio. Flexible recording and playback The i02 EXPRESS interface's discrete-design preamplifiers and true 48-volt phantom power ensure that you capture microphones' complete signal. High quality analog-to-digital and digital-to-analog converters ensure that every detail of your session or performance gets recorded – and played back on your monitoring system. It's class compliant, so you can use the plug-and-play Alesis iO2 EXPRESS with virtually any computer. The iO2 EXPRESS is USB bus powered so you won't need to carry a bulky power supply, and its performance is optimized for minimal laptop battery drain so you'll be able to track long sessions and gigs remotely. Complete iO The iO2 EXPRESS has 2 input channels. Each channel has an XLR microphone input, a 1/4" TRS insert for external effects units, and a 1/4" TS jack that works with line-level sources and can accommodate direct connection of guitars. The Alesis iO2 EXPRESS sends and receives 2 audio channels on a single USB cable for simple, universal interface. You can monitor your sessions on any studio monitoring or other loudspeaker system via dual 1/4" balanced outputs. For remote tracking and alternative playback, the iO2 EXPRESS has a 1/4" TRS headphone output. The iO2 EXPRESS features traditional MIDI In and Out jacks for playing and controlling software with keyboard and pad controllers, workstations, and other MIDI-compatible instruments. Level management Each channel has a gain trim control, and there's a master level control for optimal gain staging. When monitoring on headphones, you'll appreciate the dedicated volume control. You can also visually monitor levels and operation using the tricolor, stereo metering tree and lighted status indicators. Complete the package The Alesis iO2 EXPRESS comes complete with a copy of Steinberg Cubase LE digital audio workstation (DAW) software. Cubase is one of the most popular DAWs in the world thanks to its intuitive approach to composing, recording, editing, and mixing. In addition to the included software, the Alesis iO2 EXPRESS is compatible with virtually all audio and MIDI software. Features 2-channel computer audio recording interface Record up to 24-bit/48kHz audio into virtually any software Monitor sessions with balanced studio monitor and headphone outputs High-quality A/D and D/A converters, discrete-design preamps, 48V phantom power Inputs for microphones, line-level sources, and instruments including guitars Tricolor stereo level meter and lighted status indicators for visual monitoring MIDI Input and Output jacks for playing and controlling software instruments USB bus powered – no external power supply needed Includes: iO2 EXPRESS interface USB cable iO2 Express Audio Interface Specifications: SYSTEM REQUIREMENTS Mac: OS X 10.2+ Windows: XP, Vista, or 7 USB port FREQUENCY RESPONSE MIC/LINE IN to USB OUT: ±0.1dB MIC/LINE IN to MAIN OUT (through ADC/DAC) ±0.35dB SIGNAL-TO-NOISE RATIO (SNR) MIC/LINE IN (balanced) to INSERT OUT: 110dB A-weighted, input impedance at XLR or 1/4" jack = 600 ohms GUITAR IN (unbalanced) to INSERT OUT: 99dB A-weighted, input impedance at 1/4" jack = 600 ohms MIC/LINE IN (balanced) to USB OUT: 99dB A-weighted, input impedance at MIC or LINE jack = 600 ohms GUITAR IN (unbalanced) to USB OUT: 94dB A-weighted, input impedance at 1/4" jack = 600 ohms MIC/LINE IN (balanced) to MAIN OUT (through ADC/DAC): 97dB A-weighted, input impedance at MIC or LINE jack = 600 ohms MIC/LINE IN (balanced) to MAIN OUT (through direct monitor): 95dB A-weighted, input impedance at MIC or LINE jack = 600 ohms TOTAL HARMONIC DISTORTION + NOISE (THD+N) MIC/LINE IN (balanced) to INSERT OUT: GUITAR IN (unbalanced) to INSERT OUT: % Input Gain = minimum, 1KHz input signal, INSERT OUT = 5.3dBV MIC/LINE IN (balanced) to USB OUT: % Input Gain = minimum, 1KHz input signal, USB OUT = -0.3dBFS GUITAR IN (unbalanced) to USB OUT: % Input Gain = minimum, 1KHz input signal, USB OUT = -0.7dBFS MIC/LINE IN (balanced) to MAIN OUT (through ADC/DAC): % Input Gain = minimum, 1KHz input signal, MAIN OUT = 5.6dBV MIC/LINE IN (balanced) to MAIN OUT (through direct monitor): % Input Gain = minimum, 1KHz input signal, MAIN OUT = 5.6dBV

Boom Arm Shootout Mic Holder Mount Stand Where you can Position Your Mic Exactly Where Needed. It is Quick and Reliable Microphone Placement Includes XLR Cable & Universal Threading Mic Clip. You Can Rugged and Sturdy Double-Braced Steel Construction. It has Dual Metal Support Arms and Convenient Universal Table.  Brand Lishion Product type Live & Studio Price ₨ 2500

Boom Arm Shootout Mic Holder Mount Stand Where you can Position Your Mic Exactly Where Needed. It is Quick and Reliable Microphone Placement Includes XLR Cable & Universal Threading Mic Clip. You Can Rugged and Sturdy Double-Braced Steel Construction. It has Dual Metal Support Arms and Convenient Universal Table.  Brand Lishion Product type Electronics Price ₨ 2500

Boom Arm Shootout Mic Holder Mount Stand Where you can Position Your Mic Exactly Where Needed. It is Quick and Reliable Microphone Placement Includes XLR Cable & Universal Threading Mic Clip. You Can Rugged and Sturdy Double-Braced Steel Construction. It has Dual Metal Support Arms and Convenient Universal Table. Views: 4