Ttl

Product Description MAXV to 5.5V, Low-Power, True RS-232 Transceivers Module with DB9 Female Connector and Power Indicator LED. Technical Specifications Size: 27mm x 30mm / 1.06″x1.18″(inch) (approx) Weight:16 g Translator IC: MAX TTL Header Pitch: 2.54mm / 0.1in DB9 Connector Type: Female Operating Voltage:3 V ~ 5.5 V Maximum Datarate: 120 kbps Temperature range: -40°C ~ 85°C Operation: Full Duplex Protocol: RS232 Transceiver: 2 (1 TTL -: RS TTL

Product Description MAXV to 5.5V, Low-Power, True RS-232 Transceivers Module. Technical Specifications Size: 10mm x 15mm (0.39” x 0.59”) Operating Voltage:3 V ~ 5.5 V Maximum Datarate: 120 kbps Temperature range: -40°C ~ 85°C Operation: Full Duplex Protocol: RS232 Transceiver: 2 (1 TTL -: RS TTL

FTDI based USB to TTL Serial Cable are designed using the the standard FT232RL chipset. The cables provide a fast, simple way to connect devices with a TTL level serial interface to USB. RX and TX LEDs indicator.The cables are available with a 6-way SIL, 0.1 connector. Shipping All Across Pakistan COMPANY MATRIX ELECTRONICS CONTACT PERSON FAIZAN MUNIR Mobile0 3002785860 Email sales matrixelectronic. com w w w.matrixelectronic. com Address Shop2, Hassan Centre Near Passport Office Saddar karachi

(Broken cell holder)【High GN, Supports M, TTL Flash】 GN14 ISO100, 105mm. Supports M, TTL flash ratio setting, adjusting flash ratio of flash tube A and B or making only one flash tube flash can produce shadow on the subject, which enables the photo reach sculptural effect. 【Ring Type Double Lamp Macro Flash】 YN14EX Macro ring flash, with a lightweight body and two light heads. It is flexible for fill-light and no fear of vignetting and shadow. Wide Range for use on plant, insect, jewelry and oral cavity. 【High speed Charging Recycle System】 Recycle time of full output is only 3 seconds, you can get high-speed recycling experience within 4-5 seconds even when you are not using brand new batteries. 【Supports Lenses Of Multiple Filter Sizes and CT Filters】Equipped with adapter ring of 52mm, 58mm, 67mm, 72mm. Also equipped with four kinds of color temperature filters: white, red, fluorescent green and warm yellow, magnetic drawing method for filters is easy for use. 【Additional Function】Exposure compensation, FEB, rear-curtain sync, FE lock, Fn custom settings, menu access for Canon camera. Large-size LCD Display; LED AF Assist Lamp; Equipped with standard 2.5mm PC synchronous interface; Sound Prompt System; Equipped With External Power Socket; Auto-save Setting, supports Custom Settings.

Karachi Camera Center Rawalpindi Fowara Chowk Nissin TTL Flash Di 622 Brand New Only @ All DSLR And Lens Available At Whole Sale Prices One And Only Company Authrised Dealers In Rawalpindi Shop Timing am To 9.00pm Search On Google Maps By Typing Karachi Camera Center Rawalpindi Contact Sohaib For Shop Adress -

Product Description This is next generation CP USB/TTL Breakout Board with Additional Signals which are not present in other similar Converters. This is a great little tool for embedded systems that require a serial connection to a computer. The board can simply attach to a USB bus via a standard type B female connector and will appear as a standard COM port. Thes CP doesn’t require any external oscillator, it has an on-board voltage regulator, and it even uses a re-programmable internal EEPROM for the device description. The full hardware UART has flow control for baud rates from 300bps to bps. This breakout also allows you to connect the TX/RX pins of your favorite microcontroller or serial application to the RX/TX pins of the breakout, creating a simple serial cable replacement. Supported OS Windows XP/Server /Vista/, Windows 2K, WinCE ), WinCE ) Macintosh OSX (v3.1) Linux 3.x.x, Linux 2.6.x Android 4.2

Product Description RS485 to TTL Module (supporting EIA-485 standard) is for long range, high data rate error prone differential communication. Digital communications networks implementing the EIA-485 standard can be used effectively over long distances and in electrically noisy environments. Multiple receivers may be connected to such a network in a linear, multi-drop configuration. These characteristics make such networks useful in industrial environments and similar applications. Specifications Features MAX485 chipset. 5.08mm (0.2″) pitch, 2-pin terminals for RS-485 easy communication and wiring. 4-pin 2.54mm (0.1″) pitch headers for RS485 and Power 4-pin 2.54mm (0.1″) pitch headers for DI,DE,RE,RD signals Ready for mounting on standard 0.1″ pitch veroboard / perforated boards. Specification Working voltage: 5V

USB to TTL RS485 Serial Converter Module Adapter Standard USB2.0 RS485 Specification: Standard: USB2.0 standard, backward compatible, in line with the standard RS485 Direction control: the use of automatic data flow control, auto distinguish and control data transfer direction Baud:300-bps, automatically detecting the serial signal data rate Load capacity: support multipoint, each converter allows RS485 interface device to connect 32 Interface Protection: TVS tube protection, USB self-recovery protection Support Windows98/ME//XP/WIN7/Vista, Linux, Mac Support devices with RS485 interface: surveillance cameras, video capture device, fingerprint attendance machine, PBX, CNC machine, microcontroller, etc.

Features Power supply: 3V~5.5V (with ESD protection); Supports SP, DB9, UART ports Packing List 1 x RS232 Serial Port to TTL module Dimensions: 1.73 in x 1.26 in x 0.79 in (4.4 cm x 3.2 cm x 2.0 cm) Weight: 0.78 oz (22 g)

Description: Fingerprint scanners are awesome. Why use a key when you have one right at the tip of your finger? Unfortunately, they’re usually unreliable or difficult to implement. Well not anymore! We’ve found this great fingerprint module from ADH-Tech that communicates over TTL Serial so you can easily embed it into your next project. The module itself does all of the heavy lifting behind reading and identifying the fingerprints with an on-board optical sensor and 32-bit CPU. All you need to do is send it simple commands. To get started, just register each fingerprint that you want to store by sending the corresponding command and pressing your finger against the reader three times. The fingerprint scanner can store different fingerprints and the database of prints can even be downloaded from the unit and distributed to other modules. As well as the fingerprint “template,” the analyzed version of the print, you can also retrieve the image of a fingerprint and even pull raw images from the optical sensor! This is the updated version of the GT-511 which has an increased memory capacity. The module can store up to 200 different fingerprints (that’s 10x more than the old version!) and is now capable of 360° recognition. The module is small and easy to mount using two mounting tabs on the side of the sensor. The on-board JST-SH connector has four signals: Vcc, GND, Tx, Rx. A compatible JST-SH pigtail can be found in the related items below. Demo software for PC is available in the documents below, simply connect the module to your computer using an FTDI Breakout and start the software to read fingerprints!

USB To RS232 TTL PL2303HX 1M Cable Adapter Module Uses: Best for microcontroller interfacing with USB without Max 232 and USB to COM Port converter. Plug & Play Easy to use. Other similar products are also available on our website with delivery to any city in Pakistan Views: 2

Overview The PL USB UART Board (type A) is an accessory board that features a USB-to-UART serial convert PL, USB Type A connector, and 3 LEDs: TXD LED, RXD LED, POWER LED.There is also a jumper used for selecting VCC output level provided on the board: Short the jumper to select output voltage level as 5V or 3.3V. In this case, the accessory board is powered from USB connection and provides power to the target application board If the jumper is open, the accessory board should be powered from the target application board (3.3V-5V)

Buy the best product and deals online, from only on give the best prices (guaranteed low prices) & fastest/ quickest Services to the customers. You can simply call us to buy the product, then our representative gives you the best details and easiest way to buy. Views: 756

Wireless Transmitter for Flash Frequency: 2.4 GHz, 32 Channels Wireless Range: 328.1' High Speed Sync up to 1/8000 sec

Specification: FTDI based USB to TTL Serial Cable are designed using the the standard FT232RL chipset. The cables provide a fast, simple way to connect devices with a TTL level serial interface to USB. RX and TX OUT The cables are available with a 6-way SIL, 0.1? connector TTL levels is 3.3V The TTL-232R cables are a family of USB to TTL serial UART converter cables incorporating FTD’s FT232RQ USB to Serial UART interface IC device which handles all the USB signalling and protocols. The cables provide a fast, simple way to connect devices with a TTL level serial interface to USB Each TTL-232R cable contains a small internal electronic circuit board, utilizing the FT232R, which is encapsulated into the USB connector end of the cable. The other end of the cable comes with a selection of different connectors supporting various applications. Cables are FCC, CE, RoHS compliant and are available at TTL levels 3.3V. Cables are available with either a 6-way SIL,0.1”pitch connector, (intended for use with VMUSIC2 or VDRIVE2) or bare, tinned wire ended connections The USB side of the cable is USB powered and USB 2.0 full speed compatible. Each cable is 1.0m long and supports a data transfer rate up to 1 Mbaud Red wire: 5V Black wire: GND White wire: RXD Green wire: TXD Yellow wire: RTS Blue wire: CTS Shipping Included: Views: 2

Product Description MQ-7 sensor has high sensitivity to carbon mono oxide. It is low cost and suitable for various applications. Using high-quality dual-panel design, with a power indicator and TTL signal output instructions; With a the DOUT switch signal (TTL) output, and AO analog signal output; TTL output valid signal is low level; (When the low level output signal lights, it can be connected directly to the microcontroller or relay module) TTL output signal can be connected directly to a microcontroller IO port or connect to the relay module, potentiometer is used to adjust the output level transition threshold Features Wide detecting scope Stable and long life Fast response and High sensitivity Analog and Digital Outputs Trigger Level configuration Potentiometer Specifications Size: 32mm X22mm X27mm Operating voltage: DC 5V Analog Output (AOUT): 0~5V analog output voltage Digital Outout (DOUT): 0V or 5V output (the higher the voltage the higher the concentration) Configuration: Through Potentiometer (adjusts the output level transition) Preheat Duration: 20s

Viltrox JY-620N High Speed Flash Units*High-performance TTL electronic flash unit, perfectly compatible with Nikon i-TTL.*Sharp and Clear LCD backlite screen*Quick Recharge Time: 3 sec.*Guide Number: GN 40 (ISO MM focus distance.-Tested good figure.*Support Nikon wireless flash system (master/slave)*Support wireless output setting for different groups in M mode.*Support On-Camera/wireless TTL Exposure Lock.*Front/rear curtain sync*TTL auto exposure with exposure compensation:-3.0EV to +3.0EV*Temperature Test (high-temperature alarm)*Quick lock*Stroboflash, Parameter memory function*Low-power indicator

Body material * Magnesium Alloy chassis, high grade plastic exterior Sensor * • 23.5 x 15.6 mm CMOS sensor 'Exmor' • RGB Color Filter Array • Built-in fixed low-pass filter • million total pixels • million effective pixels • On-chip Column A/D Conversion & NR Image sizes * • x (L RAW) • x (L) • x (M) • x (S) • x (L) x (S) 16:9 File qualities / formats * • RAW (.ARW 2.0) • Compressed or uncompressed RAW option • RAW + JPEG Fine • JPEG Extra Fine • JPEG Fine • JPEG Standard Dust reduction • Static-resistant anti-dust coating • CCD-shift dust reduction mechanism Lenses • Sony Alpha lenses (also compatible with Minolta A-type bayonet mount lenses) FOV crop 1.5x Super SteadyShot • CCD-Shift 'Super SteadyShot' system • Five level LED shake indicator in viewfinder • Claimed equivalent to 2.5 – 4 steps in shutter speed * Auto Focus * • TTL CCD line sensors (11-points, 10 lines with center dual cross sensor) • EV 0 to 18 (ISO 100) detection range • Predictive focus control for moving subjects AF area selection • Wide AF area • Spot AF area (center) • Focus area selection (any of 11) Focus modes • Single-shot AF • Direct Manual Focus • Continuous AF • Automatic AF • Manual focus AF assist illuminator * • Yes (built-in LED lamp) • Range approx 1m - 7m Eye-start AF Yes, selectable from menu (optionally with grip sensor trigger*) Shooting modes • Auto • Programmed AE (with shift) • Aperture priority AE • Shutter priority AE • Manual • MR (memory recall) / Custom • Scene modes (below) Scene modes • Portrait • Landscape • Macro • Sports Action • Sunset • Night view/portrait Sensitivity • Auto () - upper/lower limit selectable * • ISO 100 • ISO 200 • ISO 400 • ISO 800 • ISO • Up to ISO (expanded range) * Metering modes • Multi-segment (40 segment Honeycomb pattern) • Center-weighted • Spot Metering range • EV 0 to 20 (Multi-segment / Center-weighted) * • EV 2 to 20 (Spot metering) * (at ISO 100 with F1.4 lens) AE Lock • AEL button (customizable) • Half-press shutter release AE Bracketing • Single or continuous bracketing • 3 or 5 frames • or 0.7 EV steps * Exposure compen. • -3.0 to +3.0 EV * • 0.3 or 0.5 EV steps * Shutter Electronically-controlled, vertical-traverse, focal-plane Shutter Shutter Speed * • 30 to sec • Bulb Flash X-sync * • sec • sec (with Super SteadyShot on) Aperture values Depends on lens, 0.3 EV steps DOF preview Yes, dedicated button White balance • Auto • Daylight • Shade • Cloudy • Tungsten • Fluorescent • Flash • Color temperature ( K) • Manual (Custom) - 3 memories * White balance fine tuning • Auto (none) • Preset WB: -3 to +3 • Fluorescent WB: -2 to +4 • Color temperature WB: G9 to M9 (Magenta to Green) White balance bracketing • 3 frames • Hi or Lo steps Dynamic range optimizer • Off • Standard • Advanced Auto * • Advanced • DRO advanced bracketing (3 frames, High/Low selectable) * Color space • sRGB • Adobe RGB Color modes • Standard • Vivid • Neutral * • Clear * • Deep * • Light * • Portrait • Landscape • Sunset • Night view • Autumn Leaves * • B&W • Sepia * • Adobe RGB Image parameters * • Contrast (-3 to +3) • Saturation (-3 to +3) • Sharpness (-3 to +3) • Zone Matching (-1 to +2 steps) • Brightness (-3 to +3 steps) (Available in all color modes) Noise reduction * • Long exposure for exposures longer than 1 second • High ISO NR High/Normal/Low at ISO or higher • User controllable: On / Off Viewfinder * • Eye-level fixed optical glass pentaprism • Spherical Acute Matte focusing screen (interchangeable) • Magnification approx. 0.9x • 95% frame coverage • Dioptric adjustment (-3 to +1.0) • Eye-relief 25 mm from eyepiece, 21 mm from frame • Eyepiece cup removable • Viewfinder info bar LCD monitor * • 3.0 " 'Xtra Fine' TFT LCD • pixels (640 x 480 x 3 (RGB)) • 270 ppi • Anti-reflective coating Flash • Built-in pop-up flash (manual release) • Metering: ADI, Pre-flash TTL, Manual flash control • Guide number 12 (ISO 100/m) • Angle of coverage 24 mm (35 mm equiv.) • Flash sync sec, sec (SteadyShot on) * Flash modes • Auto • Fill Flash • Rear Sync • Slow sync • Manual Flash • Red-eye Reduction (pre-flash) • Wireless/Remote Off-camera Flash • High Speed Sync. Flash compensation * -3.0 to +3.0 EV in 0.3 or 0.5 EV steps External flash (optional) • Sony HVL-F56M (guide no. 56) • Sony HVL-F36M (guide no. 36) • Macro Twin Flash Kit HVL-MT24AM • Ring Light HVL-RLAM • Off camera flash shoe FA-CS1 AM Drive modes • Single-frame • Continuous (H/L selectable) * • Self-timer (10 or 2 sec) • Continuous bracket • Single-frame bracket • White balance bracket • DRO bracket * Continuous shooting * • H: Approx 5fps max • L: Approx 3fps max • RAW: Up to 18 frames • cRAW (compressed): Up to 25 frames • RAW+JPEG: Up to 12 frames • JPEG (XFINE): Up to 16 frames • JPEG (STD/FINE): Unlimited (to card capacity) Self-timer • 10 sec • 2 sec • Mirror up function (optional)* Orientation sensor Yes, for shooting, playback and control panel display Connectivity * • USB 2.0 Hi-Speed (mass storage, Multi-LUN or PTP) • Video out (NTSC or PAL) • HDMI type C mini jack • DC-IN • Remote terminal • PC control (with supplied software) Remote control * • Wired: with optional RM-S1AM or RM-L1AM • Wireless: with included remote control Video out • AV (Selectable NTSC or PAL) • HDMI ( x i, x 720p, 720 x 580p, 720 x 576p) • 'PhotoTV' HD settings applied with BRAVIA. Storage * • Compact Flash Type I/II • Memory Stick Duo / Pro Duo • Supports FAT12 / FAT16 / FAT32 Power * • NP-FM500H Lithium-Ion rechargeable battery ( mAh) • Battery charger included • Optional AC adapter • Batter life Approx 650 shots (CIPA standard) Vertical grip * • Vertical Grip VG-C70AM • One or Two NP-FM500H batteries with auto switchover for power (additional battery is optional). Dimensions x x 79.7 mm (5.6 x 4.25 x 3.25 in) Weight (body) • No battery: 690 g (1.5 lb) • With battery: 768 g (1.7 lb) Condition: - No Warranty

This is a 5V 4-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Micro-controller (Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). Description: 5V 4-Channel Relay interface board, and each one needs mA Driver Current. Equiped with high-current relay, AC250V 10A; DC30V 10A. Standard interface that can be controlled directly by microcontroller (Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). Indication LED’s for Relay output status. Package Includes: 1 x 4-Channel 5V Relay Module

Price: 550 Seller Type: An Individual Condition: New "This is a 5V 4-Channel Relay interface board, Be able to control various appliances, and other equipments with large current. It can be controlled directly by Micro-controller (Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). Description: 5V 4-Channel Relay interface board, and each one needs mA Driver Current. Equiped with high-current relay, AC250V 10A; DC30V 10A. Standard interface that can be controlled directly by microcontroller (Arduino, , AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic). Indication LEDâ??s for Relay output status. Package Includes: 1 x 4-Channel 5V Relay Module" Call me at: .

Price: Seller Type: An Individual Condition: New "Features Highly integrated analog circuitry to demodulate and decode responses Supports ISO/IECA/MIFARE Typical operating distance in Reader/Writer mode for communication to a ISO/IECA / MIFARE is mm Supports MIFARE Classic encryption in Reader/Writer mode Supports ISO/IECA higher transfer speed communication up to 848kbit/s Control by Serial UART interface: Baud rate could be bps ~ bps, with default baud rate bps With the chip ISO, it supports MIFARE standard encryption algorithm Configuration data is preserved in EEPROM against power cut off Built-in 8K EEPROM, easy to access it by sending commands Easy to use, by sending simple commands users can control it to read or write cards In compact command, command is as short as one byte Excellent EMC performance Parameter Power Supply: 4.5V~5.5V, typically 5V. Interface: UART (5V TTL) and SPI (3.3V TTL) Size: 40mm x 50mm Usage Baud rate could be bps ~ bps" Call me at: .

Product Description Ultrasonic Module HC-SR04 Distance Measuring Transducer Sensor(for -Arduino) HC SR04 HCSR04 New And Original Parts Specifications: 1.Working Voltage: 5V(DC) 2.Static current: Less than 2mA. 3.Output signal: Electric frequency signal, high level 5V, low level 0V. 4.Sensor angle: Not more than 15 degrees. 5.Detection distance: 2cm-450cm. 6.High precision: Up to 0.3cm 7.Input trigger signal: 10us TTL impulse 8.Echo signal: output TTL PWL signal Pinouts: 1.VCC 2.trig(T) 3.echo(R) 4.GND

The main chip: LM393, MQ135 gas sensing probe Operating voltage: DC 5V Features: 1. Signal output indicator instructions; 2. Dual signal output (analog output, and TTL level output); 3. TTL output valid signal is low; (output low signal light, which can be accessed microcontroller IO port) 4. Analog output with increasing concentration, the higher the concentration, the higher the voltage; 5. Sulfide, benzene Department of steam, smoke and other harmful gases with high sensitivity; 6. Has a long life and reliable stability; 7. Rapid response recovery characteristics; Other types of sensor modules are also available on our website with delivery to anywhere in Pakistan. Views: 1

Features: USB to I2C, SPI USB to UART (TTL), STC ISP Applications: No serial notebook and other computers through the converter expansion USB port when the serial port to use; Need to use I2C, SPI, UART, TTL, RS232, and other occasions; Electronic engineer program debugging download; various hardware systems, software system debugging; Package:1x USB to I2C USB to RS232 USB to serial USB converter promotional package Views: 5

Price: Seller Type: An Individual Condition: Used salam... camera use may han wel condition cal me saman battry charger pouch card Image Sensor Image Sensor: 1/2.3" (Approx. 7.81mm) CCD Image Sensor: Approx. Mega pixel (Effective Pixel) Image Sensor: Approx. Mega pixel (Total Pixel) Image Stabilization Image Stabilization: DIS (Digital Image Stabilization) Focusing Focusing: TTL Auto Focus (Center AF, Multi AF) Normal: 80cm - Infinity (Wide), 100cm - Infinity (Tele) Macro: 5cm - 80cm (Wide) Auto Macro: 5cm - Infinity (Wide), 100cm - Infinity (Tele)

Price: Seller Type: An Individual Condition: Used 3-inch AMOLED Display Screen 14.6 mega pixel CMOS sensor 28mm wide-angle coverage APS-C Sensor for high quality Record HD video at 30fps i-Function lense (mm) Electronically controlled vertical-run focal plane shutter Built-in flash TTL Auto Pop-up flash Built-in electronic viewfinder BRAND NEW CONDITION PRICE IS NEGOTIABLE

Price: Seller Type: An Individual Condition: Used 3-inch AMOLED Display Screen 14.6 mega pixel CMOS sensor 28mm wide-angle coverage APS-C Sensor for high quality Record HD video at 30fps i-Function lense (mm) Electronically controlled vertical-run focal plane shutter Built-in flash TTL Auto Pop-up flash Built-in electronic viewfinder BRAND NEW CONDITION

Price: Seller Type: An Individual Condition: Used Specifications 1/2.3" (Approx. 7.81mm) CCD Image sensor Approx. 12.2 Mega pixel Effective Approx. 12.4 Mega pixels Total Main Display: cm), 112K TFT LCD Smart Auto: secProgram: secNight: secFireworks: 2sec Modes: Auto, Auto & Red-eye reduction, Fill-in flash, Slow sync, Flash off, Red eye fix Range: Wide: 0.4m ~ 3.0m, Tele: 0.5m ~ 2.0m(ISO AUTO) Samsung Lens f = mm (35mm film equivalent: mm) F No.: F3.5(W) ~ F5.9(T) Digital Zoom: Still Image mode: 1.0X ~ 3.0XPlay mode: 1.0X ~ 12.5X (depends on image size) TTL auto focus (Multi AF, Center AF, Face Detection AF, Object Tracking AF) Range: Normal: 80cm ~ infinity(Wide), 100cm ~ infinity (Tele)Macro: 5cm~80cm (Wide), 100cm ~ 150cm (Tele)Auto Macro: 5cm~Infinity (Wide), 100cm~ Infinity (Tele) Program AE Metering: Multi, Spot, Center Weighted Compensation: ±2EV (1/3EV steps) ISO Equivalent: Auto,

Price: Seller Type: An Individual Condition: Used Sale SALe SALe saLE SAMSUNG MV800 Camcorder 4 SALE Touch screen just box is open brand new  just urgent sale.specification is given below Image Sensor CCD Image Sensor Approx Megapixels Approx Megapixels Image Stabilization Dual IS (OIS DIS) Focusing TTL auto focus Type Focusing Range: Normal: 80cm - Infinity (Wide) / 150cm - infinity (Tele),Macro: 5 - 80cm (Wide) / cm (Tele), Auto Macro: 5cm - Infinity (Wide) / 100cm - Infinity (Tele) Exposure Exposure Contorl: Program AE Metering: Centre Weighted / Multi / Spot / Face Detection Lens Focal Length: Schneider Lens f= mm (35mm Film Equivalent: mm) F3.3 (W) - F5.9 (T) 5X Optical Zoom Lens Digital Zoom: Still Image Mode: 1 - 5X Display TFT LCD Type 3.0" Wide Display Size Display Feature: cm) Pixels Shutter Speed Shutter Speed: Auto: seconds / Program: seconds /Night: seconds / AEB,continuous: seconds