Terminal system

Price PK Rs.5000/- with free Shipping anywhere in Pakistan GSM Fixed Wireless Terminal GSM-8848 GSM-8848 is a GSM gateway communicator to transmit data through GSM. The communicator allows to connect PSTN landline alarm panels to GSM network. The main use of communicators is to inform the user or the CMS about an alarm in the protected premises. The alarm report can be transmitted via phone line or GSM network. The GSM-8848 Communicator offers an overall solution for the security areas where an easily configurable, reliable and intelligent GSM communication modem is required to support remote security centers. Reporting events to monitoring stations can be done over voice, SMS or GPRS. The GSM-8848 is an easy to add plug-in module that enables the system to communicate over the GPRS/GSM networks for reporting, control and programming. It can be used as the primary communication or as a back up for the IP or PSTN communications in case of communication failure. Fully replaces landline and transmits data to monitoring station if PSTN landline is unavailable or disconnected i.e. it Provides a simulated PSTN line, Switching to GSM network in case of a fall of the PSTN line. Could be used as a backup GSM connection too. This security signal transmitter device can be attached to the existing security elements (like alarm systems) to create a complete and reliable security system. It can be used either in security services, safety technology, remote control (gate opening) or online surveillance. The device can be easily integrated into the already existing systems, and provides service in places where it has not been possible before, thus offering new perspectives to our partners. It is able to transmit the compatible, standard alarm signals from the connected alarm center in Contact ID (CID) format to the remote security center. This way, the transmitting devices comprise a complete system with the installed and organized security or alarm centers. Thanks to the connection to the GSM/GPRS-based mobile communication network, and the transmission towards the surveillance center, this device guarantees is a highly reliable signaling solution. The communicator has easily understandable LCD/LED signals, and the configuration of the device does not require high level of expertise. Our device is equipped with overall remote management possibilities (remote configuration, software change), has additional security features, and guarantees constant availability and high reliability. It has a wide range of application areas and a wide choice of remote management functions, which – besides guaranteeing continuous availability – help increase the efficiency of the existing system. The GSM/GPRS module also supports two- way voice communication which is beneficial for elderly care, allowing two way communication with users in times of emergency. Application areas: Security alarm signal transmission Online surveillance Remote monitoring of existing alarm systems Signal transmission to the dispatcher center Monitoring of digital outputs (via SMS, voice, GPRS) Remote control (via SMS, voice, GPRS) Signal transmission of Elevator maintenance systems Usage for some Elderly- and patient care tasks For gate opening systems Features: GSM Dual/Quad-Band support. GSM 900MHz/1800MHz or GSM 850/900/1800/1900 MHz GSM FWT with LCD display and back up (Li-ion) battery Steady module and reliable design ensures good performance Can be used as a Primary, Backup or Standalone communicator Can be installed inside panel cabinet (no extra battery required) Compatible with most Alarm control panels like DSC, Honeywell, Bosch, Satel etc. PTM/ATS feature Intelligently monitors phone line and switches automatically to GSM network Reliable, fast ContactID communications via GSM (compatible with Sur-Gard® System II and System III receivers) Can translate Contact ID protocol to SMS text messages Flexible configuration software user interface Excellent voice quality and stability. Lightning proof and antistatic design Search network quickly, respond to dial swiftly With clear LCD display, could display signal density, date and time information Support caller ID and hand free Work with both normal SIM card and big size SIM card Preset IP access number and local call prefix numbers Accurate polarity reverse signal for billing is available and could work with billing meter. Compatible with PBX system for office use Block incoming and outgoing call numbers available Support lock phone, lock SIM card, inter-lock of the phone and SIM card Technical Specifications: GSM modem frequency: 850/900/1800/1900 MHz Power Supply Voltage: 9-15V DC 300mA max Current used in standby mode: 30mA max Dimensions: 210mm*135mm*45mm Operating Temperature: -35...+55°C Frequency stability>2.5 PPM Signal sensitivity: Antenna connector: SMA Antenna gain: 3.5dBi Condition: Brand New Price: PK Rs.5000/-. Shipping: FREE anywhere in Pakistan Contact Person: Adnan. ACEsystems www.ace-sys.com info@ace-sys.com Phone: 03343133286 Website http://www.ace-sys.com

B1-C MULTI-MEDIA FINGERPRINT TIME ATTENDANCE TERMINAL B1-C is an innovative biometric fingerprint reader for Time & Attendance applications. The B1-C offers unparalleled performance by using an advanced proprietary matching algorithm which is reliable, precise and has the fastest fingerprint matching speed. The 3” TFT screen can display more information vividly, including fingerprint image quality, verification result and any other information you wish to display on the screen. B1-C comes standard with TCP/IP and RS-232 communication ports. An optional USB port allows administrator to transfer date when network isn’t available. B1-C is also available with integrated Proximity (ID) or Mifare option to us the reader for multi-factor authentication. SDK is available for OEM and software developers. B1-C is feature-rich yet low-priced biometric terminal which match the capabilities to today’s high priced competing terminal in market place. Features ZK optical sensor 1 touch a-screen user recognition Stores templates and transactions Reads fingerprint and/or PINS Built-in serial and Ethernet ports Multi-language support Real-time 1-touch data export 3rd party hosted &non-hosted applications Audio-visual indications for acceptance and rejection of valid/invalid fingers SDK available for OEM customers and software developers Color TFT screen with GUi interface for ease of use Optional integrated proximity or smart card reader Built-in bell scheduling Specifications Capacity Templates Transactions Verification/Identification Matching1:N up to templates Verification Condition: 5/10- Warranty: 2 Months

Introduction: VF300 is a new generation facial identification terminal, with Face, RFID and PIN Recognition mode. With latest facial algorithm ZK Face 7.0 and large capacity ZEM810 platform, it holds 200 face templates without dividing groups, and its verification time is less than 1 Second. All setting operations are easily done on 3.0 inches TFT touch screen. The elegant and small size design can fit with your slap-up office. Have ZK Face identification system, your life will become more secure and convenient. Features: ·Elegant ergonomic design ·TCP/IP communication and USB Host. ·3.0 inch TFT touch screen, T9 Input, 9 Digit User ID. ·Infra-red optical system enables user-identification in poorly lit environments. ·Optional Mifare card module ·Professional facial identification algorithm Specifications: Hardware Platform: ZEM810 Image Sensor Special Stereo Dual Sensor Display 3 Inch Touch Screen Face Capacity :N) ID Card Capacity Logs Capacity Algorithm Version ZKFace7.0 Communication TCP/IP, USB Host Standard Functions ID card?Automatic Status Switch, Self-Service Query, Work Code, T9 input, 9 digit user ID, DLST?Scheduled-bell Optional Functions Mifare card. Power Supply 12V/1.5A Verification Speed less than 1S Operating temperature 0-45 Operating Humidity % Dimensions(L×H×D) mm Connection Diagram: Finger Pak www.fingerpak.com Head Office Sales Office # 197, Mezzanine Floor, Ferozpurwala Centre, Jeswani Street, Serai Road, Karachi. Tel: 021- Fax No: 021- website: www.fingerpak.com Email: Hussain Box Pack- Warranty: 1 Year

I Clock900 TFT LCD Fingerprint Terminal Introduction: Secubio's fastest fingerprint-matching algorithm and multispectral sensor technology maintains its performance in almost any environment. Meanwhile Iclock900 can easily enroll and verify ALL people – including that 2-5% of the population with “problem fingerprints” that thwart conventional sensors. Features: 2.8 Inch Samsung High definition TFT LCD color screen Built in embedded standalone module with high performance ATMEL, Big capacity FLASH and CMOS chips. Perfect verification using Korean multispectral image sensor Industries best Secubio spoof detection technology Almost everyone can be enrolled and verified Works in any environment-rain, snow, cold, dry, dusty or hot 1-touch employee recognition No need to enter PINs Wiegand protocol Compatible with other fingerprint access control system using the wiegand protocol Supports 50 time zones,5 groups and 10 unlock combinations Tamper proof switch and alarm outputs Request-to-exit and alarm contacts Operates stand-alone without a computer Audio-visual indications for acceptance &rejection of valid and invalid fingerprint SDK available for DEM customers and software developments Specifications: Item Description Fingerprint capacity Record Storage Period of data Keep data for 3 years when no current Collecting rate Port rate(BPS, BPS, BPS) Verification mode 1: N, 1:1 Response time ≤1 second Resolution 500DPI The capacity of connecting net 31 units (RS485 mode), 255 units (TCP/IP) FRR % FAR % Distance m (RS485) Show Time, ID number, Name Working mode Time & attendance, standalone, can work persistently Save function Turn off device automatically for saving Time & Attendance mode Fingerprint, password, fingerprint +password, card(optional) fingerprint + card (optional) Temperature/Humidity ％ Power supply DC5V, 1A (AC 100V to 240 V, 50 to 60 Hz) Option Proximity or Mifare card reader,backup batteryUSB Warranty of period 12 months Size mm Applications Office/factory/bank/hotel/school etc Connection Diagram: FINGER PAK Products: www.fingerpak.com Box Pack - No Warranty

Introduction: Biopad 100, an innovative time clock integrated with features of easy operation, advanced identification algorithm, exquisite interface, and multimode communication is your reliable workforce management assistant. With super size 7 inches touch screen you can enjoy easy operation experience. It features the new generation biometric time management terminal with fast ZK Finger VX 10.0 identification algorithm and polished interface. Multimode communication, including Ethernet, USB, and Wi-Fi makes data transfer easy and reliable. Features: *Super size 7 inches touch screen. *Wi-Fi facilitates operations by eliminating cabling effort. *Network communication ensures the reliable data delivery. *Built-in USB port allows manual data transfer when network isn't available. *With built-in cameras capturing real-time photos ensures the accuracy of identification. *Support proximity, Mifare or HID card as optional features. *Backup battery ensures seamless operation and security of employee information. (Optional) *SD card backs up data in case of a network or power outage. (Optional) Specifications: Capacity Card Capacity Fingerprint Templates Transaction Capacity Hardware Sensor ZK Optical Sensor Relay Contact Relay Bell (Optional) Display 7 inches Touch Screen LED Indicator Red and Green Camera Pixels Camera Power 12 V DC, 3 A; Optional 7.4 V Back-up Battery Communication Comm. Port Ethernet, Wi-Fi Pen Drive USB-Host SD Card SD Card Slot and Optional SD Card Firmware Algorithm Version ZK Finger VX10.0 Operation System Linux Standard Function SMS, DLST, Scheduled-bell, Self-Service Query, Automatic Status Switch, T9 input, 9 digit user ID, Photo ID, Wi-Fi Optional Function: ID/Mifare/HID, 14 digit user ID, ADMS Environment Oper. Temp 0 ?- 45 ? Oper. Humidity % Dimensions Dimensions (L×H×D) mm Gross Weight 2.3 kg For more info www.fingerpak.com Authorized Sole Distributor pakistan For Price & Technologies Support info contact us Hussain Cell: - Ashok Cell: 92- HEAD OFFICE KARACHI Head Office # 4 Third Floor Feroz pur wala Center Jeswani Street Serai Road Karachi Pakistan Tell: . Fax: . Web: www.fingerpak.com E-Mail: Email Box Pack- Warranty: 1 Year

BS101 Multi-Media Fingerprint Time Attendance Terminal Product Description: BS101 is an innovative biometric fingerprint reader for time attendance applications, Built-in mAh backup battery can eliminates the trouble of power-failure. Support optional GPRS and Wi-Fi. The IN01 features the fastest commercial-based fingerprint matching algorithm and high-performance, high-image quality optical fingerprint sensor. The 3" TFT can display more information vividly, including fingerprint image quality and verification result etc. TCP/IP communication is standard and make sure the data transmission between terminal and PC can be easily done within several seconds. Feature Color TFT screen with GUI Interface for ease of use Optical Sensor 1 touch a-second user recognition Reads Fingerprint and/or PINs Optional integrated proximity or smart card reader Built-in Serial and Ethernet ports Multi Language Support Built-in battery backup provides approx 4 hours continuous operation Optional built-in wireless Wi-Fi or GPRS for wireless communication Real-time 1-touch data export 3rd party hosted & non-hosted applications SDK available for OEM customers and software developers Specifications Fingerprint Capacity templates Transaction Capacity Hardware Platform BIO510 Sensor Optical Sensor Algorithm Version BIO VX10.0 Communication RS, TCP/IP, USB-Client, USB-Host Standard Functions Work code, SMS, DLST, Self-Service Query, Automatic Status Switch, Back-up battery Optional Functions ID/Mifare/HID, Extensible barcode, Relay-bell, Scheduled-bell, Web-server, SOAP, 9 digit user ID, Wi-Fi, GPRS Display 3 inches TFT Screen Power Supply 12V DC 1.5A Operating Temperature 0- 45 Operating Humidity % Dimension mm Hussain Ashok Khemani www.fingerpak.com Sales Office # 197, Mezzanine Floor, Ferozpurwala Centre, Jeswani Street, Serai Road, Karachi. Tell: . Web: www.fingerpak.com E-Mail: Box Pack- Warranty: 1 Year

BS101 Multi-Media Fingerprint Time Attendance Terminal Product Description: BS101 is an innovative biometric fingerprint reader for time attendance applications, Built-in mAh backup battery can eliminates the trouble of power-failure. Support optional GPRS and Wi-Fi. The IN01 features the fastest commercial-based fingerprint matching algorithm and high-performance, high-image quality optical fingerprint sensor. The 3" TFT can display more information vividly, including fingerprint image quality and verification result etc. TCP/IP communication is standard and make sure the data transmission between terminal and PC can be easily done within several seconds. Feature Color TFT screen with GUI Interface for ease of use Optical Sensor 1 touch a-second user recognition Reads Fingerprint and/or PINs Optional integrated proximity or smart card reader Built-in Serial and Ethernet ports Multi Language Support Built-in battery backup provides approx 4 hours continuous operation Optional built-in wireless Wi-Fi or GPRS for wireless communication Real-time 1-touch data export 3rd party hosted & non-hosted applications SDK available for OEM customers and software developers Specifications Fingerprint Capacity templates Transaction Capacity Hardware Platform BIO510 Sensor Optical Sensor Algorithm Version BIO VX10.0 Communication RS, TCP/IP, USB-Client, USB-Host Standard Functions Work code, SMS, DLST, Self-Service Query, Automatic Status Switch, Back-up battery Optional Functions ID/Mifare/HID, Extensible barcode, Relay-bell, Scheduled-bell, Web-server, SOAP, 9 digit user ID, Wi-Fi, GPRS Display 3 inches TFT Screen Power Supply 12V DC 1.5A Operating Temperature 0- 45 Operating Humidity % Dimension mm Fingerpak http://www.fingerpak.com Box Pack- Warranty: 1 Year

Imported Professional DJ System, MEP 7000 PIONEER brand DJ system with twin scratch port and twin CD. with 4 channel mixer all housed in professional heavy duty case. all in almost perfect condition. DESIGNED IN UK MADE IN MALAYSIA. GREAT FOR WEDDING, FUNCTION, PARTIES. The MEP-7000 enables you to play MP3/AAC files stored on various memory formats, along with playback of music from your CD collection. The system can also be setup to playback and mix music automatically using playlists, useful when no DJ is present. The MEP-7000 and SEP-C1 Software Entertainment Controller are a response to the trend of laptops being utilised by professional DJs. Recent developments have changed the way mobile and club DJs organise and play their music. No longer carrying boxes of vinyl or CD’s full of music, laptops, USB flash media and hard drives are becoming standard amongst the DJ community. Key new features to this product type are the 4.3-inch colour LCD screen that gives clear accurate information, allowing intuitive and easy menu navigation. The MEP-7000 transforms into a Karaoke playback device when a CD-G disc is inserted, displaying the playback video on the LCD screen, but can also be fed to external monitors using the composite video output terminal. The MEP-7000 also works as a software controll erwhen used in conjunction with compatible software such as our bundled “DJS”. This allows you to manage and control playback of audio files stored on your computer, to give full-scale DJ performance without the need for a mouse or keyboard

Seller Type: An Individual Condition: Used Biometric attendance system finger print time attendance and access control terminal

EAN Megapixel HD IP Camera Full HD p 2 Megapixel H.264/M-JPEG SDHC Slot Features p/720p HD color CMOS image sensor delivers HDTV video quality in 16:9 aspect ratio Supports both H.264 and Motion JPEG in full 30 fps frame rate High Performance Noise Filter improves image quality and conserves disk storage Provides NTSC/PAL TV signal output for local aim and focus or display on an analog monitor. Dual Codec for H.264 and MJPEG allows choice of stream formats to fi t the application Built-in slot for an SDHC card enables local event or backup recording in the event of network interruptions Provides true day/night functionality with automatic IR filter operation Two Way Audio transport (line level input/output) ONVIF / PSIA compliance interoperates with a broad range of systems Dual power capability PoE or 12VDC for flexible installation Local alarm inputs and outputs Specifications CAMERA Camera Type Indoor, traditional style megapixel network camera Pickup Device 1/3" Full HD progressive scan CMOS sensor Lens Type Optional C/CS mount, manual / DD control support Sensitivity 0.5Lux / F=1.2 Day/Night True Day/Night with IR cut filter Electronic Shutter Speed s to 1/7.5 s SENSE-UP OFF/x2/x4 Auto Gain Control OFF/Low/Middle/High selectable White Balance mode Auto, Custom Noise Filter Auto/Low/High Other settings Brightness, Contrast, Saturation, Sharpness, Hue, Auto Exposure, Backlight Compensation, Mirror, Flip, Day/Night, Anti-Flicker Video Output BNC socket, composite 1 V p-p / 75Ω in local test mode only VIDEO STREAMING Video Compression H.264/M-JPEG Video Resolution x to 160x120 Video Quality VBR: 5 level adjustable, CBR: 30Kbps~6Mbps Frame Rate All resolutions @ fps AUDIO Audio Compression G.726 ADPCM 8 kHz Audio Input 1 Vrms; 3.5mm phone jack; Mono Audio Output 1 Vrms; 3.5mm phone jack; Mono Operation Mode Two-way audio NETWORK Interface 10Base-T/100Base-TX auto-negotiation, RJ-45 socket Support MDI/MDI-X auto crossover function Supported Protocols TCP/IP,UDP,ICMP,DHCP,NTP,DNS,DDNS,SMTP,SNMP,FTP,HTTP,HTTPs, PPPoE,UPnP,Bonjour,RTP,RTSP,RTCP,UDP,IGMP,ICMP,ARP,ONVIF,PSIA TERMINAL I/O Alarm Input / Output 1/1 RS485 Yes (function reserved) EVENT MANAGEMENT Event Trigger Alarm Input, Manual Trigger, Motion Detection, Schedule Recording Notifications Trigger alarm output, Send mail notification, Upload video to FTP, Record video to PC, Record to SD card and Network alarm LOCAL STORAGE Pre- and Post - alarm buffer Up to 120 sec. SD Card Secure Disk physical layer specification version 2.0 Supports SDHC Host Specification POWER Power Supply 12 VDC & PoE Power over Ethernet Yes (PoE af) Power Consumption 4 W max. (12VDC) PHYSICAL Weight 550g / lbs. Dimension 68 (W) x 57 (H) x 135 (D) mm / 2.72” (W) x 2.28” (H) x 5.4” (D) ENVIRONMENTAL Operating Temp. 0°C ~ 40°C / 32°F ~ 104°F Humidity Certifications CE / FCC for more info visitwww.askhitech.com for new product and complete range visit www.fingerpak.com Box Pack- Warranty: 1 Year

iClock-360 is a Time & Attendance terminal with incorporated ZK fingerprint sensor and 3’5 TFT display. Easy to install, and with a modern design, it is the perfect solution for small and middle installations. It incorporates the ZK fingerprint Sensor. The color TFT display offers users easy menu management. iClock-360 is based on ZEM600z platform which allows more memory capacity and professional firmware functions. It can connect to Time & ttendance management software by Ethernet or USB port, and also operate on standalone mode, downloading data by USB pendrive. Features:  Time and Attendance device  Incorporates ZK fingerprint sensor and optionally RFID reader  Stores up to 8000 templates.  Stores up to 200.000 log records without PC download.  Allows communication with PC through Ethernet and USB port  Events management (doctor, personal issues, etc…)  All European languages (standard texts and voices) included  Audio voices (male or female) and text configured by menu  Professional firmware with advanced functions as: • Photo ID (shows the user photo) • Smartmode (automatic Check-In and check-Out). • Real-Time (log records communication to server). • Background image (set company logo or brand) • Advanced log query management • Complete events management • Mifare technology configured by menu (Key A/B) • USB download records (format and data defined by user)  Professional SDK (advanced functions) Specifications Capacity Templates 8000 Transactions 200,000 Hardware Platform ZEM600 CPU 32bit MultiBio Microprocessor 630MHz Memory 64M RAM, 256M Flash Sensor ZK optical sensor Display LCD TFT Screen 3’5 inch LED Indicator Red and Green Environment Oper. Temp 0°-45°C Oper. Humidity 20%-80% Power Power 12V, DC, 1.5A Communication Comm. Port Ethernet, USB-Client Pen drive USB-host Fingerprint Algorithm Type ZK Finger 9.0 and 10.0 Identification <=2 seconds Verification <=1second FRR < 1% FAR <=0.0001% Languages Available All European languages Maximum All configured by menu. Voices Allowed. Standard male and female Keypad Type buttons keypad Function Keys 8 defined by user Events Management Up to 9999 with description Dimensions Dimensions 192x137x45mm (L x W x D) Weight 1.05kg Firmware O.S Linux Applications T&A SDK Professional SDK

The MPG range gel batteries are designed with front terminal structure. The perfect design ensures MPG series battery the high reliability and makes the installation quite simple and safe when placed on a standard relay rack tray or in a closed cabinet. Adopt Flat plates with gel electrolyte. fresh manufactured 2015 narada 150ah narada 155ah narada 6002 v cell shoto 600ah 2v cell

The MPG range gel batteries are designed with front terminal structure. The perfect design ensures MPG series battery the high reliability and makes the installation quite simple and safe when placed on a standard relay rack tray or in a closed cabinet. Adopt Flat plates with gel electrolyte. fresh manufactured 2015 narada 150ah narada 155ah narada 6002 v cell shoto 600ah 2v cell Views: 616

Price: 25,499/- Range summary The Acme.F range front access valve regulated lead acid batteries is designed with real front access structure. The state-of the-art internal and external design ensures Acme.F the high reliability and makes the installation squite simple and safe when placed on a standard relay rack tray or in a closed cabinet. Acme.F range VRLA battery is designed with high energy density and suitable for 19". 23" rack or cabinet. Acme.F also offers options of top connection and side of monoblocs connection. The terminal protector for Acme.F batteries are designed with special probe hole allowing safe and easier voltage testing and suitable for all connection means. The specially centralized venting system ensures the small gas be vented our of the closed cabinet The prmium Acme.F batteries are ensured the quality with NARADA's QA system according to the ISO90001 and ISO14001 standard. Technical features Real front-access terminal connections for fast and easy installation and maintenance Easy on easy off multi-purpose design ternimal protector Suitable for 19", 23" racking or cabinet Proven excellent special lead-tin-calcium formula alloy for grids and plates Mircoporous glass mats in low resistance as separator Flame retardant ABS material container and cover compliant with UL94 V-0 Self-regulating pressure relief valve 12 years expectant Life under full float service at 68oF(20oC) Compliant standards Designed to be compliant with: IEC 60896-2 BS 6290 Part 4 Telcordia SR-4228 EUROBAT GUIDE UL Manufactured under system ISO9001 & ISO14100 by NARADA Battery installation compliant with: EN 50272-2 or local equivalents Main applications Telecom standby and cyclical applications UPS Power system Products characteristics: Recommended float charge voltage for 12V battery: 2.25Vpc at 77oF(25oC) Self discharge rate: < 2% pre month at 77oF(25oC) Design life: more than 12 years at 68oF(20oC) Shelf life: 6 months at 68oF(20oC) Valve regulated system, no water addition needed Regards, Solutions inn 0334-3333193 0312-5311713 042-35311713 Price: 25,499/- Range summary The Acme.F range front access valve regulated lead acid batteries is designed with real front access structure. The state-of the-art internal and external design ensures Acme.F the high reliability and makes the installation squite simple and safe when placed on a standard relay rack tray or in a closed cabinet. Acme.F range VRLA battery is designed with high energy density and suitable for 19". 23" rack or cabinet. Acme.F also offers options of top connection and side of monoblocs connection. The terminal protector for Acme.F batteries are designed with special probe hole allowing safe and easier voltage testing and suitable for all connection means. The specially centralized venting system ensures the small gas be vented our of the closed cabinet The prmium Acme.F batteries are ensured the quality with NARADA's QA system according to the ISO90001 and ISO14001 standard. Technical features Real front-access terminal connections for fast and easy installation and maintenance Easy on easy off multi-purpose design ternimal protector Suitable for 19", 23" racking or cabinet Proven excellent special lead-tin-calcium formula alloy for grids and plates Mircoporous glass mats in low resistance as separator Flame retardant ABS material container and cover compliant with UL94 V-0 Self-regulating pressure relief valve 12 years expectant Life under full float service at 68oF(20oC) Compliant standards Designed to be compliant with: IEC 60896-2 BS 6290 Part 4 Telcordia SR-4228 EUROBAT GUIDE UL Manufactured under system ISO9001 & ISO14100 by NARADA Battery installation compliant with: EN 50272-2 or local equivalents Main applications Telecom standby and cyclical applications UPS Power system Products characteristics: Recommended float charge voltage for 12V battery: 2.25Vpc at 77oF(25oC) Self discharge rate: < 2% pre month at 77oF(25oC) Design life: more than 12 years at 68oF(20oC) Shelf life: 6 months at 68oF(20oC) Valve regulated system, no water addition needed Regards, Solutions inn 0334-3333193 0312-5311713 042-35311713

Features: Maintenance-free operation Shock-and shatter-resistant plastic Quality standard ISO Extended operating life Very good charging efficiency Service life: 10 years Product Description: The FM Series 6FM55-X has Excellent Recovery from Deep Discharge, is 12 volts 55Ah, measures 9.41L x 5.20W x 8.07H with total terminal height of 8.29 inches. 6FM55-X weighs 36.9 lbs and has M6 Terminals. Vision FM series of VRLA batteries are recognized as the most reliable and high quality battery system in the industry The rechargeable batteries are lead-lead dioxide systems. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized. Should the battery be accidentally overcharged producing hydrogen and oxygen, special one-way valves allow the gases to escape thus avoiding excessive pressure build-up. Otherwise, the battery is completely sealed and is, therefore, maintenance-free, leak proof and usable in any position. Features: Maintenance-free operation Shock-and shatter-resistant plastic Quality standard ISO Extended operating life Very good charging efficiency Service life: 10 years Product Description: The FM Series 6FM55-X has Excellent Recovery from Deep Discharge, is 12 volts 55Ah, measures 9.41L x 5.20W x 8.07H with total terminal height of 8.29 inches. 6FM55-X weighs 36.9 lbs and has M6 Terminals. Vision FM series of VRLA batteries are recognized as the most reliable and high quality battery system in the industry The rechargeable batteries are lead-lead dioxide systems. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized. Should the battery be accidentally overcharged producing hydrogen and oxygen, special one-way valves allow the gases to escape thus avoiding excessive pressure build-up. Otherwise, the battery is completely sealed and is, therefore, maintenance-free, leak proof and usable in any position. Features: Maintenance-free operation Shock-and shatter-resistant plastic Quality standard ISO Extended operating life Very good charging efficiency Service life: 10 years Product Description: The FM Series 6FM55-X has Excellent Recovery from Deep Discharge, is 12 volts 55Ah, measures 9.41L x 5.20W x 8.07H with total terminal height of 8.29 inches. 6FM55-X weighs 36.9 lbs and has M6 Terminals. Vision FM series of VRLA batteries are recognized as the most reliable and high quality battery system in the industry The rechargeable batteries are lead-lead dioxide systems. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized. Should the battery be accidentally overcharged producing hydrogen and oxygen, special one-way valves allow the gases to escape thus avoiding excessive pressure build-up. Otherwise, the battery is completely sealed and is, therefore, maintenance-free, leak proof and usable in any position. features: Maintenance-free operation Shock-and shatter-resistant plastic Quality standard ISO Extended operating life Very good charging efficiency Service life: 10 years Product Description: The FM Series 6FM55-X has Excellent Recovery from Deep Discharge, is 12 volts 55Ah, measures 9.41L x 5.20W x 8.07H with total terminal height of 8.29 inches. 6FM55-X weighs 36.9 l bs and has M6 Terminals. Vision FM series of VRLA batteries are recognized as the most reliable and high quality battery system in the industry The rechargeable batteries are lead-lead dioxide systems. The dilute sulfuric acid electrolyte is absorbed by separators and plates and thus immobilized. Should the battery be accidentally overcharged producing hydrogen and oxygen, special one-way valves allow the gases to escape thus avoiding excessive pressure build-up. Otherwise, the battery is completely sealed and is, therefore, maintenance-free, leak proof and usable in any position. Pick up /Delivery: I can also ship by cargo next day delivery. Please call for bank details, upon verifying payment we will ship via a cargo for next day traceable delivery.Delivery charges you will be pay at the end.(Delivery cost around R.s. in case you're not in Lahore or you don't like to come to pick up the item. Contact Us:

Summary: MP series, under the name of “Marathon Purpose”, is a front terminal VRLA battery too, but with more conservative design to ensure high reliability and long life. Front terminal and centralized venting system design makes MP series become popular product for standard 19”/21” cabinet since easier installation & maintenance. MP series is mainly designed for Telecom, UPS as a premium front terminal battery. Nominal Voltage: 12V Rated Capacity: 155Ah Technical Features: • AGM-Acid Valve-Regulated Lead Acid battery • Premium design for higher reliability & performance • Front terminal design suited for 19”/21” cabinet • Strong handles for easy operation • Patent Terminal sealing & front access • Self-regulating pressure relief valve with flame arrester • Terminal cover for insulation with flexible access • Flame retardant ABS case (UL94 V-0, optional) • Centralized H2 gas vent kit • Comply with IEC, IEEE, UL, EN, CE standards, etc. • Design life at 25°C (77°F): 12+ years Main Applications: • Telecommunications • Uninterruptible power supply (UPS) • Switchgear / utility • Other applications to provide integrated stored energy systems Views: 4

General Imaging Device: 1/3" ClearVid™ CMOS sensor (with Exmor™ technology) Processor: BIONZ™ image processo Pixel Gross: K Video Actual: K Pixels (K Pixels (16:9) Video Resolution: x Still Actual: K Pixels (K Pixels (16:9) Still Picture Resolution: 10.2 megapixel Recording Media: 120GB9 Non-Removable Hard Disk Drive, Memory Stick Duo™ Media, Memory Stick PRO Duo™ Media Recording and Playback Times: High Definition: FH = 14 hours 50 min. HQ = 29 hours and 40 min. SP = 36 LP = 48 hours Standard Definition: HQ = 29 hours and 40 min. SP = 44 hours LP = 84 hours and 20 min.When using 8GB Memory Stick PRO Duo™ Media (sold separately): High Definition: FH = up to 55 min., HQ = up to 115 min. SP = up to 140 min., LP = up to 180 min. Standard Definition: HQ = up to 115 min., SP = up to 170 min., LP = up to 5 hours 25 min. Optics/Lens Lens Type: Carl Zeiss® Vario-Sonnar® T 35mm Equivalent: mm (4:3 Camera Mode),mm (16:9 Camera Mode) Aperture: F Digital Zoom: 150x Filter Diameter: 37mm Focal Distance: mm Focus: Full range auto / Manual Progressive Shutter Mode: Yes Shutter Speed: Auto, (Scene Selection Mode) Minimum Illumination: 5 lux (Auto Slow Shutter ON, 1/30 Shutter Speed) Optical Zoom: 12x Display LCD Screen: 3.2" wide1 touch panel Xtra Fine LCD™ display (921k pixels) Viewfinder: Color Wide K Pixels) Inputs and Outputs Audio/Video Remote Terminal: Yes Analog Audio/Video Output(s): Included (via A/V Remote Terminal) Digital Audio/Video Output(s): Yes (via USB) USB Port(s): Hi-speed (2.0 compliant) Component Video (Y/Pb/Pr) Output(s): Included (via A/V Remote Terminal) HDMI™ Connection Output(s): Yes (mini) Headphone Jack: Yes Microphone Input: Yes S-Video Output(s): Available via A/V Remote (cable not included) Active Interface Shoe: Yes Audio Audio Format: Dolby® Digital 5.1 Microphone: Built-in Zoom Microphone Video Format: HD: MPEG4 AVC/H.264 SD: MPEG2 Video Signal: NTSC color, EIA standards PhotoTV HD: Yes Convenience Face Detection: Yes Image Stabilization: O.I.S. Low Light Capability: S-NS Dynamic Range Optimizer: Yes Quick On: Yes x.v.Color™: Yes Removable Flash Media Compatibility: Tested to support up to 8GB media capacity; does not support high speed transfer function; does not support Access Control security function. Dual Record: Yes Face Index: Yes Film Roll Index: Yes Still Image Mode(s): JPEG Digital Picture Effect(s): Old Movie Hybrid: Yes Fader Effect(s): Black, White Hybrid Plus: N/A Picture Effect(s): Sepia, Monotone, Pastel Exposure: Touch Panel Scene Mode(s): Auto, Twilight, Twilight Portrait, Candle, Sunrise & Sunset, Fireworks, Landscape, Portrait (Soft Portrait), Spotlight, Beach, Snow USB Streaming: N/A Dubbing Button: Yes (Camera body & Handycam Station) Photo Capture from Movie: Yes PictBridge Compatible: Yes Easy Operation: Yes Slide Show Mode: Yes Accessory Shoe: Yes (Active Interface Shoe) White Balance: 5 lux(Auto Slow Shutter ON, 1/30 Shutter Speed) Software Supplied Software: Picture Motion Browser Ver. Operating System Compatibility: Microsoft® Windows® Professional, XP Home, XP Professional, Windows Vista Weights and Measurements Weight (Approx.): 1 lb 6oz (650g) with Battery Dimensions (Approx.): 3 3/8 x 3 x 5 1/2 inch (83x76x138mm) Convenience Features Multiple Language Display: Yes BRAVIA® Sync™: Yes Hardware Assignable Dial: Yes Light/Flash: Yes Manual / Auto Lens Cover: Auto Media Card slot: Memory Stick PRO Duo™ Media S/S & Zoom button on LCD: Yes Power Battery Type: InfoLITHIUM® with AccuPower™ Meter System (NP-FH60) Power Requirements: 7.2V (battery pack); 8.4V (AC Adaptor) Power Consumption (in Operation): 4.5W/4.8W/4.9W Accessories Power Adapter/In-Camera Charger (AC-L200) Handycam Station™ cradle (DRCA-C200) nfoLITHIUM® Rechargeable Battery (NP-FH60) Component Video Cable USB Cable Remote Commander® Remote Control (RMT-835) Multi A/V Cable (Stereo) Original LowePro Bag Electret Condenser Microphone ECM-MSD1 Video Flash light HVL -HFL1 Box Open - Never Used - No Warranty

Range summary The Acme.F range front access valve regulated lead acid batteries is designed with real front access structure. The state-of the-art internal and external design ensures Acme.F the high reliability and makes the installation squite simple and safe when placed on a standard relay rack tray or in a closed cabinet. Acme.F range VRLA battery is designed with high energy density and suitable for " rack or cabinet. Acme.F also offers options of top connection and side of monoblocs connection. The terminal protector for Acme.F batteries are designed with special probe hole allowing safe and easier voltage testing and suitable for all connection means. The specially centralized venting system ensures the small gas be vented our of the closed cabinet The prmium Acme.F batteries are ensured the quality with NARADA's QA system according to the ISO and ISO standard. Technical features Real front-access terminal connections for fast and easy installation and maintenance Easy on easy off multi-purpose design ternimal protector Suitable for " racking or cabinet Proven excellent special lead-tin-calcium formula alloy for grids and plates Mircoporous glass mats in low resistance as separator Flame retardant ABS material container and cover compliant with UL94 V-0 Self-regulating pressure relief valve 12+ years expectant Life under full float service at 68oF(20oC) Compliant standards Designed to be compliant with: IEC BS Part 4 Telcordia SR- EUROBAT GUIDE UL Manufactured under system ISO & ISO by NARADA Battery installation compliant with: EN or local equivalents Main applications Telecom standby and cyclical applications UPS Power system Products characteristics: Recommended float charge voltage for 12V battery: 2.25Vpc at 77oF(25oC) Self discharge rate: Design life: more than 12 years at 68oF(20oC) Shelf life: 6 months at 68oF(20oC) Valve regulated system, no water addition needed Solar Dynamic Technologies Co, Pakistan

Range summary The Acme.F range front access valve regulated lead acid batteries is designed with real front access structure. The state-of the-art internal and external design ensures Acme.F the high reliability and makes the installation squite simple and safe when placed on a standard relay rack tray or in a closed cabinet. Acme.F range VRLA battery is designed with high energy density and suitable for " rack or cabinet. Acme.F also offers options of top connection and side of monoblocs connection. The terminal protector for Acme.F batteries are designed with special probe hole allowing safe and easier voltage testing and suitable for all connection means. The specially centralized venting system ensures the small gas be vented our of the closed cabinet The prmium Acme.F batteries are ensured the quality with NARADA's QA system according to the ISO and ISO standard. Technical features Real front-access terminal connections for fast and easy installation and maintenance Easy on easy off multi-purpose design ternimal protector Suitable for " racking or cabinet Proven excellent special lead-tin-calcium formula alloy for grids and plates Mircoporous glass mats in low resistance as separator Flame retardant ABS material container and cover compliant with UL94 V-0 Self-regulating pressure relief valve 12+ years expectant Life under full float service at 68oF(20oC) Compliant standards Designed to be compliant with: IEC BS Part 4 Telcordia SR- EUROBAT GUIDE UL Manufactured under system ISO & ISO by NARADA Battery installation compliant with: EN or local equivalents Main applications Telecom standby and cyclical applications UPS Power system Products characteristics: Recommended float charge voltage for 12V battery: 2.25Vpc at 77oF(25oC) Self discharge rate: Design life: more than 12 years at 68oF(20oC) Shelf life: 6 months at 68oF(20oC) Valve regulated system, no water addition needed Orient Traders Pakistan Box Pack

Range summary The Acme.F range front access valve regulated lead acid batteries is designed with real front access structure. The state-of the-art internal and external design ensures Acme.F the high reliability and makes the installation squite simple and safe when placed on a standard relay rack tray or in a closed cabinet. Acme.F range VRLA battery is designed with high energy density and suitable for " rack or cabinet. Acme.F also offers options of top connection and side of monoblocs connection. The terminal protector for Acme.F batteries are designed with special probe hole allowing safe and easier voltage testing and suitable for all connection means. The specially centralized venting system ensures the small gas be vented our of the closed cabinet The prmium Acme.F batteries are ensured the quality with NARADA's QA system according to the ISO and ISO standard. Technical features Real front-access terminal connections for fast and easy installation and maintenance Easy on easy off multi-purpose design ternimal protector Suitable for " racking or cabinet Proven excellent special lead-tin-calcium formula alloy for grids and plates Mircoporous glass mats in low resistance as separator Flame retardant ABS material container and cover compliant with UL94 V-0 Self-regulating pressure relief valve 12+ years expectant Life under full float service at 68oF(20oC) Compliant standards Designed to be compliant with: IEC BS Part 4 Telcordia SR- EUROBAT GUIDE UL Manufactured under system ISO & ISO by NARADA Battery installation compliant with: EN or local equivalents Main applications Telecom standby and cyclical applications UPS Power system Products characteristics: Recommended float charge voltage for 12V battery: 2.25Vpc at 77oF(25oC) Self discharge rate: Design life: more than 12 years at 68oF(20oC) Shelf life: 6 months at 68oF(20oC) Valve regulated system, no water addition needed Orient Traders Pakistan

Range summary The Acme.F range front access valve regulated lead acid batteries is designed with real front access structure. The state-of the-art internal and external design ensures Acme.F the high reliability and makes the installation squite simple and safe when placed on a standard relay rack tray or in a closed cabinet. Acme.F range VRLA battery is designed with high energy density and suitable for " rack or cabinet. Acme.F also offers options of top connection and side of monoblocs connection. The terminal protector for Acme.F batteries are designed with special probe hole allowing safe and easier voltage testing and suitable for all connection means. The specially centralized venting system ensures the small gas be vented our of the closed cabinet The prmium Acme.F batteries are ensured the quality with NARADA's QA system according to the ISO and ISO standard. Technical features Real front-access terminal connections for fast and easy installation and maintenance Easy on easy off multi-purpose design ternimal protector Suitable for " racking or cabinet Proven excellent special lead-tin-calcium formula alloy for grids and plates Mircoporous glass mats in low resistance as separator Flame retardant ABS material container and cover compliant with UL94 V-0 Self-regulating pressure relief valve 12+ years expectant Life under full float service at 68oF(20oC) Compliant standards Designed to be compliant with: IEC BS Part 4 Telcordia SR- EUROBAT GUIDE UL Manufactured under system ISO & ISO by NARADA Battery installation compliant with: EN or local equivalents Main applications Telecom standby and cyclical applications UPS Power system Products characteristics: Recommended float charge voltage for 12V battery: 2.25Vpc at 77oF(25oC) Self discharge rate: Design life: more than 12 years at 68oF(20oC) Shelf life: 6 months at 68oF(20oC) Valve regulated system, no water addition needed Orient Traders Pakistan Box Pack- Warranty: 6 Months

Range summary The Acme.F range front access valve regulated lead acid batteries is designed with real front access structure. The state-of the-art internal and external design ensures Acme.F the high reliability and makes the installation squite simple and safe when placed on a standard relay rack tray or in a closed cabinet. Acme.F range VRLA battery is designed with high energy density and suitable for " rack or cabinet. Acme.F also offers options of top connection and side of monoblocs connection. The terminal protector for Acme.F batteries are designed with special probe hole allowing safe and easier voltage testing and suitable for all connection means. The specially centralized venting system ensures the small gas be vented our of the closed cabinet The prmium Acme.F batteries are ensured the quality with NARADA's QA system according to the ISO and ISO standard. Technical features Real front-access terminal connections for fast and easy installation and maintenance Easy on easy off multi-purpose design ternimal protector Suitable for " racking or cabinet Proven excellent special lead-tin-calcium formula alloy for grids and plates Mircoporous glass mats in low resistance as separator Flame retardant ABS material container and cover compliant with UL94 V-0 Self-regulating pressure relief valve 12+ years expectant Life under full float service at 68oF(20oC) Compliant standards Designed to be compliant with: IEC BS Part 4 Telcordia SR- EUROBAT GUIDE UL Manufactured under system ISO & ISO by NARADA Battery installation compliant with: EN or local equivalents Main applications Telecom standby and cyclical applications UPS Power system Products characteristics: Recommended float charge voltage for 12V battery: 2.25Vpc at 77oF(25oC) Self discharge rate: Design life: more than 12 years at 68oF(20oC) Shelf life: 6 months at 68oF(20oC) Valve regulated system, no water addition needed Orient Traders. Box Pack- Warranty: 6 Months

Price: 17,499/- Range summary: The MPG range gel batteries are designed with front terminal structure. The perfect design ensures MPG series battery the high reliability and makes the installation quite simple and safe when placed on a standard relay rack tray or in a closed cabinet. Adopt Flat plates with gel electrolyte. This new technology leverages on the advantages of the AGM and Ares technology to provide better cycle performance versus the AGM technology and a shorter time discharge performance as compared with the Gel technology. MPG range gel battery is designed with high energy density and suitable for 19", 23" rack or cabinet, and also offers options of top connection and side of monoblocs connection. MPG range battery can be equipped with central gas collection system according to the requirement of customer. The MPG batteries are ensured the quality with NARADA's QA system according to the ISO9001 standard. Technical feature: Gel technology applied in MPG range batteries. Front-access terminal connections for fast and easy installation and maintenance Suitable for 19", 23" rack or cabinet Excellent special lead-tin-calcium formula alloy for Grids and plates Mircoporous glass mats in low resistance as separator Self-regulating pressure relief valve 12 years expectant Life under full float service at 25oC(77oF) Compliant standards: IEC60896-21/22 Din standard UL Manufactured under system ISO9001(TUV) Battery installation compliant with: EN 50272-2 or local equivalents Main application: Telecommunications Uninterruptible power supply (UPS) Switchgear / utility Other applications to provide integrated stored energy system Products characteristics: Recommended float charge voltage for 12V battery: 2.25Vpc at 25oC(77oF) Self discharge rate: < 2% per month at 25oC(77oF) Shelf life: six months at 25oC(77oF) Valve regulated system, no water addition needed Regards, Solutions inn 0334-3333193 0312-5311713 042-35311713

Price: 25,499/- Range summary The Acme.F range front access valve regulated lead acid batteries is designed with real front access structure. The state-of the-art internal and external design ensures Acme.F the high reliability and makes the installation squite simple and safe when placed on a standard relay rack tray or in a closed cabinet. Acme.F range VRLA battery is designed with high energy density and suitable for 19". 23" rack or cabinet. Acme.F also offers options of top connection and side of monoblocs connection. The terminal protector for Acme.F batteries are designed with special probe hole allowing safe and easier voltage testing and suitable for all connection means. The specially centralized venting system ensures the small gas be vented our of the closed cabinet The prmium Acme.F batteries are ensured the quality with NARADA's QA system according to the ISO90001 and ISO14001 standard. Technical features Real front-access terminal connections for fast and easy installation and maintenance Easy on easy off multi-purpose design ternimal protector Suitable for 19", 23" racking or cabinet Proven excellent special lead-tin-calcium formula alloy for grids and plates Mircoporous glass mats in low resistance as separator Flame retardant ABS material container and cover compliant with UL94 V-0 Self-regulating pressure relief valve 12 years expectant Life under full float service at 68oF(20oC) Compliant standards Designed to be compliant with: IEC 60896-2 BS 6290 Part 4 Telcordia SR-4228 EUROBAT GUIDE UL Manufactured under system ISO9001 & ISO14100 by NARADA Battery installation compliant with: EN 50272-2 or local equivalents Main applications Telecom standby and cyclical applications UPS Power system Products characteristics: Recommended float charge voltage for 12V battery: 2.25Vpc at 77oF(25oC) Self discharge rate: < 2% pre month at 77oF(25oC) Design life: more than 12 years at 68oF(20oC) Shelf life: 6 months at 68oF(20oC) Valve regulated system, no water addition needed Regards, Solutions inn 0334-3333193 0312-5311713 042-35311713