Shock mounting

Features Large 1" (25mm) capsule with gold-plated diaphragm Cardioid polar pattern Self noise of only 5dB (A) Ultra low noise, transformerless surface mount circuitry Wide dynamic range Gold-plated output contacts True condenser (externally biased) Internal capsule shock mounting Includes: Premium shock mount Pop filter Cable Microphone dust cover NT1-A Condenser Mic Bundle Specifications: Power: P48 (48V), P24 (24V) phantom supply Acoustic principle: Pressure gradient Directional pattern: Cardioid Frequency range: 20Hz - 20kHz Output impedance: 100Ohms Signal noise ratio: >88dB SPL (A - weighted per IEC651) Equivalent noise: 5dB SPL (A - weighted per IEC651) Maximum SPL: 137dB SPL (@1kHz, 1% THD into 1KOhms load) Maximum output voltage: +13.7dBu (@1kHz, 1% THD into 1KOhms load) Sensitivity: -32dB re 1 Volt/Pascal (25mV @ 94dB SPL) +/- 2 dB @1kHz Weight: 11.5 oz. - 326g Dimensions (WxHxD): 190mm x 50mm x 50mm Views: 1

HF2 1” capsule with gold-plated diaphragm Cardioid polar pattern True condenser (externally biased) Full frequency response Ultra low noise High strength welded and heat-treated mesh head Internal capsule shock mounting 10 year extended warranty when you register online at www.rodemic.com/warranty With its ultra-low 6dBA self-noise and transformerless circuitry, the RØDE NT exhibits exceptional performance when recording both vocals and instruments. Voiced for versatility, it has been hailed by many as the ultimate microphone for grand piano and drum overheads. The NT is also a fantastic vocal microphone. The RØDE NT microphone is designed and made in Australia, and covered by RØDE's industry leading 10 year warranty. Barely used, includes box!

Features Studio recording quality Condenser microphone Supercardioid polar pattern 9V battery power Integrated Rycote Lyre shock mounting Two step High Pass Filter (Flat/80Hz) Three step PAD (0, =10, -20dB) Rugged reinforced ABS construction Windshield included 3.5mm mini-jack output Integrated cold-shoe mount (3/8" thread) Specifications ACOUSTIC PRINCIPLE: Line Gradient ACTIVE ELECTRONICS: JFET impedance converter CAPSULE: 0.50" POLAR PATTERN: Supercardioid - Picks up the front and sides and rejects 150 to the rear ADDRESS TYPE: End

The X1 Vocal Pack gives you everything you need to start recording in your project or home studio. The X1 Vocal Pack includes all your recording essentials: an sE X1 condenser microphone, a shock mount, an sE Metal Pop Filter and a high-quality 3m mic cable. The unique shockmount mounting system makes for quick and easy setup. Sweetwater knows that value is important to you, and the sE X1 Vocal Pack delivers it, bigtime. Great sound, incredible value Are you ready to be completely blown away by an inexpensive condenser mic? Then check out the sE Electronics sE X1 cardioid condenser mic. The sE X1 features one of sE Electronics's custom hand-made 1" diaphragms, which has a clear and rich sound. A 10dB pad and a Bass Cut switch add versatility to the sE X1's palette, making it well suited for a wide range of instruments, as well as vocals. One of the unique things about the sE X1 is its black rubber paint finish, which shrugs off the scrapes and dings any piece of heavily used studio gear is eventually exposed to. And once you hear this extraordinary microphone, you're going to want to use it on everything! Factor in the included, highly effective sE Shock Mount, sE Metal Pop Shield, and sE Mic Cable, and the sE X1 Vocal Pack is to good to pass up! sE X1 Vocal Pack Features at a Glance: Everything you need to start recording in your project or home studio: SE X1 Cardioid Condenser Mic sE Shock Mount sE Metal Pop Shield sE 3m Mic Cable Shop No. 345-D, 3rd Floor Star City Shopping Mall, Opp,Bambino Cinema Abdullah HaroonRoad Saddar Karachi Pakistan

Type Studio Microphone Product Description The sE X1 is one of our most popular microphones and whether you’re recording vocals, percussion, guitar or any other instrument, the sE X1 is the perfect choice. It features a hand built capsule with a 10dB pad and low cut bass filter and is finished in noise damping black paint. The sE X1 is ideal for both male and female vocals. The sE X1 Vocal Pack consists of everything you need to start recording straight away in your project and home studio. The unique shockmount mounting system makes for quick and easy setup. The sE X1 Vocal Pack includes the recording essentials; sE X1 condenser microphone, a shock mount, sE Metal Pop Filter and a 3m high-quality microphone cable. The sE Metal Pop Filter is crucial for recording vocals and has been created with the metal screen louvered at a slight angle. This redirects any ultra-low frequency blasts leaving the vocal performance unaffected and without any low frequency ‘pop’s. Being made of metal as opposed to the traditional fabric shield makes the sE Pop Filter much more durable. What the professionals say: we chose the sE X1 over the NT1a for the vast majority of the recordings, because the recordings sounded 'righter' when put into the middle of tracks - we could do more with them in mixing and the end result was better Technical Specs for the sE X1 Condenser microphone: Frequency Response: 20Hz-20KHz Sensitivity: -32 dBV/Pa (25.1mV/Pa) Polar Pattern: Cardioid Impedance: ≤ 200 Ohms Equivalent Noise Level: 16dB(A weighted) Max SPL for 0.5% THD@Hz: 125dB Power Requirement: Phantom power 48V±4V Connector: 3-pin The sE X1 Vocal Pack includes: sE X1 Condenser microphone sE Metal Pop Filter sE Shock Mount sE XLR-XLR 3m Microphone Cable

The sE X1 is one of our most popular microphones and whether you’re recording vocals, percussion, guitar or any other instrument, the sE X1 is the perfect choice. It features a hand built capsule with a 10dB pad and low cut bass filter and is finished in noise damping black paint. The sE X1 is ideal for both male and female vocals. The sE X1 Vocal Pack consists of everything you need to start recording straight away in your project and home studio. The unique shockmount mounting system makes for quick and easy setup. The sE X1 Vocal Pack includes the recording essentials; sE X1 condenser microphone, a shock mount, sE Metal Pop Filter and a 3m high-quality microphone cable. The sE Metal Pop Filter is crucial for recording vocals and has been created with the metal screen louvered at a slight angle. This redirects any ultra-low frequency blasts leaving the vocal performance unaffected and without any low frequency ‘pop’s. Being made of metal as opposed to the traditional fabric shield makes the sE Pop Filter much more durable. What the professionals say: we chose the sE X1 over the NT1a for the vast majority of the recordings, because the recordings sounded 'righter' when put into the middle of tracks - we could do more with them in mixing and the end result was better. - Producer Simon Franglen (Avatar, Madonna, Titanic) Technical Specs for the sE X1 Condenser microphone: Frequency Response: 20Hz-20KHz Sensitivity: -32 dBV/Pa (25.1mV/Pa) Polar Pattern: Cardioid Impedance: ≤ 200 Ohms Equivalent Noise Level: 16dB(A weighted) Max SPL for 0.5% THD Hz: 125dB Power Requirement: Phantom power 48V±4V Connector: 3-pin The sE X1 Vocal Pack includes: sE X1 Condenser microphone sE Metal Pop Filter sE Shock Mount sE XLR-XLR 3m Microphone Cable

The sE X1 is one of our most popular microphones and whether you’re recording vocals, percussion, guitar or any other instrument, the sE X1 is the perfect choice. It features a hand built capsule with a 10dB pad and low cut bass filter and is finished in noise damping black paint. The sE X1 is ideal for both male and female vocals. The sE X1 Vocal Pack consists of everything you need to start recording straight away in your project and home studio. The unique shockmount mounting system makes for quick and easy setup. The sE X1 Vocal Pack includes the recording essentials; sE X1 condenser microphone, a shock mount, sE Metal Pop Filter and a 3m high-quality microphone cable. The sE Metal Pop Filter is crucial for recording vocals and has been created with the metal screen louvered at a slight angle. This redirects any ultra-low frequency blasts leaving the vocal performance unaffected and without any low frequency ‘pop’s. Being made of metal as opposed to the traditional fabric shield makes the sE Pop Filter much more durable. What the professionals say: we chose the sE X1 over the NT1a for the vast majority of the recordings, because the recordings sounded 'righter' when put into the middle of tracks - we could do more with them in mixing and the end result was better. - Producer Simon Franglen (Avatar, Madonna, Titanic) Technical Specs for the sE X1 Condenser microphone: Frequency Response: 20Hz-20KHz Sensitivity: -32 dBV/Pa (25.1mV/Pa) Polar Pattern: Cardioid Impedance: ? 200 Ohms Equivalent Noise Level: 16dB(A weighted) Max SPL for 0.5% THD 1000Hz: 125dB Power Requirement: Phantom power 48V±4V Connector: 3-pin The sE X1 Vocal Pack includes: sE X1 Condenser microphone sE Metal Pop Filter sE Shock Mount sE XLR-XLR 3m Microphone Cable

Built-in professional high performance cardioid pickup micropho-ne, with long pickup distance, wide frequency response and high definition sound resolution. Adopts professional grade anti-noise circuit board, su-per noise suppression characteristics. With external mode switch for universal application with DSLR camera and sm-artpho-ne, 3.5mm TRRS wide use, no adapter cable required. The orig-inal shock mount design can minimize the interference sound caused by micropho-ne bumps and shaking. The standard cold shoe and 1/4-inch screw thread under the shock mount can meet the needs of wide mounting on camera and stand.

Neewer NW-700 Professional Studio Broadcasting Recording Condenser Microphone & NW-35 Adjustable Recording Microphone Suspension Scissor Arm Stand with Shock Mount and Mounting Clamp Kit CITI COMPUTERS address shop no f-80 regal trade squre regal chowk saddar karachi pakistan