Reset time

www.telebrandspk.com NO NEED MOBILE FOR COVERT COMMUNICATION: Police, safe guarder, detective, studio, film spot, gambling and club, important conferences. Features: 1) No need any other Bluetooth set, Just the earpiece, New Technic 2) Audio power 4.5W.Long Distance reach to 60 CM, big voice, and voice adjustable 3) Can work Mhz all over the world (India,USA need IMEI number before send aboard) mh Battery can work for 5- 6 hours according to the volume This super mini earphone receiver kit is extremely well hidden and next to impossible to detect. If you’re looking for the most discreet audio transmitter kit on the market, then continue reading to learn more. No need mobile phone. GSM Neckloop and earpiece - that're all you need. Features of GSM Neckloop Two way covert communication via mobile phone networks Optimized inductive coil creates strong power for earpiece Can support Works with Micro Nano earpeice Built-in top sensitive 38dB microphone to pick up whisper voice Working Principles of GSM Neckloop The new developed GSM Neckloop has a build-in dual band GSM module that works in both of Four Band mobile phone networks. Once insert a GSM SIM card and turn on the power, it will automatically pick-up calls from any mobile phone or telephone. The powerful inductive coil will creat strong signals to drive earpieces within 60cm distance. One pc 35db top sensitive microphone ensures your partner hear the whisper voices, even the GSM Neckloop is hidden under the clothes. The SOS/ Reset button allows you to cut off audio output signals to avoid earpiece detectors. GSM Neckloop has a built-in rechargeable 920mAh battery. It supports 6 hours talking time. Full recharge takes 4 hours. How To Use: 1) Insert the GSM SIM card in to the device 2) Press the ON button for 2 seconds, the red led light shining, and wait for 4 seconds for the devices to search the signals, then use your phone to call the device. 3) Put the earpiece into your ear, and enjoy the calling now 4) Press the voice up and down button to adjust the voice volume 5) While Charging, the led light is in blue and shining again and again, after it full charge, the blue light will be always on. 6) Press the SOS Button for Reset. Packing including: 1* GSM BOX With Loop (Black Color) 1* wireless covert Nano Megnetic Earpiece (205d Opstional) 1* 1pcs 337 battery 1* cable and charger Box Pack- Warranty: 6 Months

Operating Range 160to 260 V ac Maximum Load 1000VA / 5A Under-voltage Trip 170 Volt AC Under-voltage Reset 8Vac Over-voltage Trip 265Vac Over-voltage Reset 5Vac Triping Time 0.2sec. Reset Time approx.* 3minutes.

Air Condition Power Protector With Volt, Ampere & Temperature Meter First time in Pakistan Digital Automatic Voltage Protector Interruption Tripping & Voltage Fluctuation, Current Display:0.5A-30A Temperature Display: 15Sec Ampere Display: 30Sec Voltage Display: Constant Reset Time: 3Min Low voltage protection: Trip 150V AC high voltage protection: Trip 260V AC Trip 260V AC Protect your: Air Condition, AC cabinet Water pump, Fridge/freezer, LCD, TV, Computer & All kind of Electrical Appliances safety door to prevent accidental electric shock Earth Socket outlets Maximum Load 30 amp Easy To Install Accuracy Product details of Voxsn 30 Amp Automatic Digital Air Condition Power Protector With Volt, Ampere & Temperature Meter, Over & Under Voltage Protection For AC Cabinet Smart Monitor Fridge & Deep Freezer accessories, Timer Relay Breaker Muhafiz Switch (updated) Air Condition Power Protector With Volt, Ampere & Temperature Meter First time in Pakistan Digital Automatic Voltage Protector Interruption Tripping & Voltage Fluctuation, Current Display:0.5A-30A Temperature Display: 15Sec Ampere Display: 30Sec Voltage Display: Constant Reset Time: 3Min Low voltage protection: Trip 150V AC high voltage protection: Trip 260V AC Trip 260V AC Protect your: Air Condition, AC cabinet Water pump, Fridge/freezer, LCD, TV, Computer & All kind of Electrical Appliances safety door to prevent accidental electric shock Earth Socket outlets Maximum Load 30 amp Easy To Install Accuracy

Smart Voltage Monitor Operating Voltage 180-260 V.AC Tripping Time 2 Sec Reset Time for Fridge Freezer: 3 Minutes Reset Time for LCD, Computer: 10 Second Power Switching Capacity: 220 V.AC, 01 to 5 Amp Protects From High Voltage, Low Voltage, Volt Fluctution

Air Condition Power Protector With Volt, Ampere & Temperature Meter First time in Pakistan Digital Automatic Voltage Protector Interruption Tripping & Voltage Fluctuation, Current Display:0.5A-30A Temperature Display: 15Sec Ampere Display: 30Sec Voltage Display: Constant Reset Time: 3Min Low voltage protection: Trip 150V AC high voltage protection: Trip 260V AC Trip 260V AC Protect your: Air Condition, AC cabinet Water pump, Fridge/freezer, LCD, TV, Computer & All kind of Electrical Appliances safety door to prevent accidental electric shock Earth Socket outlets Maximum Load 30 amp Easy To Install Accuracy

Product details of Voxsn 30 Amp Automatic Digital Air Condition Power Protector With Volt, Ampere & Temperature Meter, Over & Under Voltage Protection For AC Cabinet Smart Monitor Fridge & Deep Freezer accessories, Timer Relay Breaker Muhafiz Switch (updated) Air Condition Power Protector With Volt, Ampere & Temperature Meter First time in Pakistan Digital Automatic Voltage Protector Interruption Tripping & Voltage Fluctuation, Current Display:0.5A-30A Temperature Display: 15Sec Ampere Display: 30Sec Voltage Display: Constant Reset Time: 3Min Low voltage protection: Trip 150V AC high voltage protection: Trip 260V AC Trip 260V AC Protect your: Air Condition, AC cabinet Water pump, Fridge/freezer, LCD, TV, Computer & All kind of Electrical Appliances safety door to prevent accidental electric shock Earth Socket outlets Maximum Load 30 amp Easy To Install Accuracy

FREE DELIVER TO YOUR DOOR STEP. PLEASE FEEL FREE TO CONTACT US. CONTACT PERSON:ZEESHAN MOBILE: + ALSO DEAL IN WHOLESALE ALL OVER THE PAKISTAN 100% Brand New with Fast Shipping! Support Photo Shooting Play back by Windows Media Player Plug and play (No software installation required) Memory Storage: Supports the TF/Micro SD up to 16GB (Memory Card Not Included) Dimension: 50 x 32 x 12mm Color: Black with Silver loop Video AVI Format: 720 x 480 High Resolution Photo JPEG Format: pixels Battery: Built-in Rechargeable 280mAH 3.7V Battery (Recharge by your computer via USB Port) Color Video and Audio Recording. Connectivity: USB 1.1 or 2.0 Support System: Win / XP / / Vista / Win 7 / OS / Linux / MAC OS Recording time: Approx. 2 Hours continuous recording on a full charge. Record about 2 Hours with 4GB The Date and time can be changed before making the video and then will synchronize with the recording. There are two function buttons. The one closest to the camera hole is designated REC. The other one is inboard of the REC button and designated ON/OFF. DIRECTIONS OF USE 1. The device has a built-in rechargeable battery that needs to be fully charged when the device is new. 2. Make sure to insert a MicroSD card before using the device. 3. Press and hold ON/OFF to turn on the device. The Yellow LED will turn on, which means the device is in STANDBY mode. 4. Press and hold REC to start recording video. The yellow LED will blink fast three times, then turn off. This means that during video recording, the LED is not lit, which makes it less likely to be spotted. 5. Press REC to pause video recording and save the recording to that point. The LED will turn on. The device is now in STANDBY mode. In STANDBY mode, press REC to take a still image. To continue recording, press and hold REC. 6. To record a still image: Turn on the device by pressing and holding ON/OFF to enter STANDBY mode. The LED will turn on. Press REC to record a single still image. The LED will flash. Press REC for another image. 7. To set the date/time of the device, which is used to timestamp media recordings, create a text file in the root of the MicroSD card with a file name of TAG.TXT. Open the file and add the following three lines: [date] Replace the date and time above with the values you want. Save the file. Turn the device off, then back on to reset the clock based on the text file. 8. To turn off the device, press and hold ON/OFF until the LED goes out. 9. The device powers off by itself after a period of inactivity. 10. It's not necessary to power on the device to access recorded media via the USB cable. 11. When you first connect the device to a computer, it may be necessary to install a driver. 12. If the device stops functioning, use the reset button to reset the device. The reset button is recessed inside the small hole between the MicroSD card and the USB port. CONTENTS: 1x Keychain Camera (not include TF memory Card) 1x USB Cable 1x User manual Box Pack - No Warranty

100% Brand New with Fast Shipping! Support Photo Shooting Play back by Windows Media Player Plug and play (No software installation required) Memory Storage: Supports the TF/Micro SD up to 16GB (Memory Card Not Included) Dimension: 50 x 32 x 12mm Color: Black with Silver loop Video AVI Format: 720 x 480 High Resolution Photo JPEG Format: pixels Battery: Built-in Rechargeable 280mAH 3.7V Battery (Recharge by your computer via USB Port) Color Video and Audio Recording. Connectivity: USB 1.1 or 2.0 Support System: Win / XP / / Vista / Win 7 / OS / Linux / MAC OS Recording time: Approx. 2 Hours continuous recording on a full charge. Record about 2 Hours with 4GB The Date and time can be changed before making the video and then will synchronize with the recording. There are two function buttons. The one closest to the camera hole is designated REC. The other one is inboard of the REC button and designated ON/OFF. DIRECTIONS OF USE 1. The device has a built-in rechargeable battery that needs to be fully charged when the device is new. 2. Make sure to insert a MicroSD card before using the device. 3. Press and hold ON/OFF to turn on the device. The Yellow LED will turn on, which means the device is in STANDBY mode. 4. Press and hold REC to start recording video. The yellow LED will blink fast three times, then turn off. This means that during video recording, the LED is not lit, which makes it less likely to be spotted. 5. Press REC to pause video recording and save the recording to that point. The LED will turn on. The device is now in STANDBY mode. In STANDBY mode, press REC to take a still image. To continue recording, press and hold REC. 6. To record a still image: Turn on the device by pressing and holding ON/OFF to enter STANDBY mode. The LED will turn on. Press REC to record a single still image. The LED will flash. Press REC for another image. 7. To set the date/time of the device, which is used to timestamp media recordings, create a text file in the root of the MicroSD card with a file name of TAG.TXT. Open the file and add the following three lines: [date] Replace the date and time above with the values you want. Save the file. Turn the device off, then back on to reset the clock based on the text file. 8. To turn off the device, press and hold ON/OFF until the LED goes out. 9. The device powers off by itself after a period of inactivity. 10. It's not necessary to power on the device to access recorded media via the USB cable. 11. When you first connect the device to a computer, it may be necessary to install a driver. 12. If the device stops functioning, use the reset button to reset the device. The reset button is recessed inside the small hole between the MicroSD card and the USB port. CONTENTS: 1x Keychain Camera (not include TF memory Card) 1x USB Cable 1x User manual Box Pack- Warranty: 1 Months

1 Operating voltage 3.3V / 5V optional. Arduino can only work at 5V, 3.3V all often encounter level interface modules,IO port can not be connected directly. The need for level shifting,such as SD card, Bluetooth module. Funduino can make it work at 3.3V via toggle switch, this time the level is 3.3V IO port can work directly with the 3.3V level modules. 2 Stronger power. Arduino using FT232RL 3.3V output power, maximum output current is less than 100mA, require large currents encountered peripheral modules will supply shortage. Funduino use output 3.3V power supply, the maximum current is 500mA. Arduino 5V power supply only 500mA, while Funduino use an external power supply when the power supply can provide up to 5V 2A. 3 more obvious LED indication. When expansion board plugged it, Arduino LED will be blocked, you can not see PWR, TX and RX indicators. Funduino moved the indicator board edge, even with expansion board can also see the light. 4 is easier to press the reset button. Arduino reset button when the expansion board is inserted will be blocked and can not be reset on the motherboard. Funduino reset button to move the edge of the board, can easily press. 5 Extended 5-pin lead. Arduino analog pins and three digital pins by common electronic building blocks / steering 3PIN interface leads. You can easily connect directly to many electronic building blocks sensor / control module, and steering gear, do not use the sensor expansion board. 6 wide input voltage. Arduino only supports 7-12V input, but Funduino support 7-23V input.

Features: 1.Electrical parameter measurement function: voltage, current, active power, energy, frequency, power factor 2.Overload alarm function: overpower alarm threshold, backlight, and power flashing to alarm 3. Power alarm threshold preset function: can set power alarm threshold 4. The energy can be reset using the key 5.Store data when power off 6. Large-screen LCD can display six parameters at the same time 7.Backlight function 8.Key function Backlight control Short press the key to turning on or off the backlight, the backlight has a memory function, it can store the on or off state when power off. Reset energy Step1: Long press the key for 5 seconds until the energy value flashes, then release the key. Step2: Short press the key again, then the energy value is cleared and exit the reset flashing state. Step3: If there is no operation on the key within 5 seconds, it means the energy value is not cleared and will exit the reset state. Set power alarm threshold Step1: Long press the key until the LCD screen display “SET CLR”, then release the key to enter the setting state Step2: Power window displays the current power alarm value and the last digit begins to flash, then you can short press to plus 1 when there is no operating over 3 seconds, it will switch the digit position automatically, the setting method is as same as the above. Step3: After finish, the setting, long press the key over 5 seconds will store automatically and exit, the range of active power threshold is 0.0~2.5kW. Specifications: 1. Working voltage: 80-260VAC 2. Test voltage: 80-260VAC 3. Rated power: 5A/1100W 4. Operating frequency: 45-65Hz 5. Measurement accuracy: 1.0 grade Display format: 1.Power: test range: 0-1100W, Starting measure power: 0.2W Views: 4

Operations: 1.Press A,blue and red lights brighten in one time and blue light will be off after 3seconds, and thedevice will be standby mode. 2.Press B to take photo and store one photo 3.Press C, the red light will flash 3times and begin to record, press C again to stop recording and store the file. 4.Press D, the blue light and red light will flash 3 times and motion detection function is on. The blue ligh turns off after the bright, begin to record. Please press D to stop recording and the red light will be on at the same time. 5.Press A to turn off the device, the red light will be off after one time flash fastly. 6.When the power low, the device will be off automaticlly. The red light will flash slowly when the device is working with low power, store the files automaticlly and turn off. 7.Connect the device with PC via USB cable, preaa A to read files. 8.The device can be powered by power source, the battery will be full about 3hours later. The red light is on when the device is charging and off after full power. 9.Reset: Because of the wrong operation or any other unknown reasons,the device go die,please push the button to OFF and push it to ON again, to reset. 10.Open the device from computer, and create a new text file named "time. txt" in the root directory. Opening text file, according to the following format to input current date and time, such as: (Year. Month. Day.Hour. Minute.Seconds),save the file to finish setting. Store and play files: After recording, turn off the device, connect it with computer via USB,copy of delete the files into the computer to play. Or take off the TF card,read files by card-reader. Recommend: Media player/KM player Specifications: Pixels 5.0 Mega CMOS OV Video Resolution Video Format AVI FPS 30fps Video coding M-JEPG View Angle 120° Motion Detection Distance Direct 6 meters Low Illumination 1LUX Battery Capacity 280MA Recording Time About 80 mins Remote Control Distance 18m Recording Audio Area 40 square meters Power Consumption 150MA/3.7V Memory TF Card Max. 32GB Software Operation system comes with or mainstream video player software Data Transfer Interface USB Operation System /XP/Visat32 Charge Time About 4 hours Box Pack- Warranty: 6 Months

Special features Built in 4 Gb memory. TFT memory card slot to extend memory. Built in high quality rechargable battery that gives unmatchable (as copmare to the other spy devices) recording time ranging from 4 to 10 hours. Built in speaker that can be used to listen recorded/ stored MP3 files. Built in 1.2 inch screen that can be used for viewing recorded / stored movie file. Can act as MP3 player. Other Features video recording time settings (time stamp) This will display the recording date and time. Video files were stored by date folder AVI format resolution 640X480 video / recording indicator on / off setting function Video / audio files can be deleted in the native Recording sampling rate of 48K PCM high-quality recording Built-in high-fidelity speakers Built-in high-definition camera A-B repeat function MP3 music player function Built-in lithium battery, 4GB memory static video recording time is about 3.5 hours, dynamic video about 2.5 hours The 8GB memory static video recording time of about 7 hours, dynamic video about 4.5 hours Play music life 6 hours (fully charged headset playback) recording life time 4 hours (full power continuous recording) Notes For Safety Charge up Don’t lie the machine on the bed, under the pillow and the place where can be reach by children. Waterproofness The machine has not waterproofness, please keep dry and clean Recording file integrity Make sure keep the “reset” key on this side of the arrowhead when the recorder is running, otherwise file is lost. Interference Keep away from the electronic interference. Children Keep children away from the recording pen especially when charging up. USB file Uploading/Downloading At data transfer between recorder and PC, the system prompts BUSY, and the connection can not be disconnected, otherwise data is lost Accessories: USB Cable Hi-Fi Earphone Manual Charger Box Pack- Warranty: 6 Months

FREE DELIVER TO YOUR DOOR STEP. PLEASE FEEL FREE TO CONTACT US. CONTACT PERSON:ZEESHAN MOBILE: + ALSO DEAL IN WHOLESALE ALL OVER THE PAKISTAN This Bluetooth Clip Spy Camera is the perfect secret device to covertly record videos and snapshot images of those around you. All while looking and function like your average Bluetooth device! Chill and Spy like a Pro Every day you can be secretly surveying everything around you with this cool Bluetooth Clip Spy Camera. With this device in your hands, you won’t fail to record the most interesting and secret things you may come across unexpectedly. It records video and sound with the push of a button, and can also take snapshot images, so you can covertly record all the top secrets documents you want. It’s dangerous to go alone in the world without some kind of secret recording device, so you should take this and have the peace of mind that you can record anything that comes your way. Legit Hands-free This Bluetooth Clip Spy Camera works as a convenient hands-free device for your cellphone; it’s the ultimate cover for your secret recording activities. No one will guess the little black clip attached to you is a spy camera. Small and lightweight, this inexpensive Bluetooth Device is a must have for people on the go that need to always be ready to answer the phone and also want to be ready to record anything they see. At a Glance... Super Secret Spy Camera Bluetooth Clip – Never get detected Hands-free functionality with your awesome smartphone It can be used as USB drive/camera Real time recording in AVI video format Support slot for TF/Micros Card 1-16GB Manufacturer Specifications Color: Black Connectors/Ports: - 3.5 Headset out - Micro SD - Micro USB Buttons/switches: - Reset (pinhole) - On/off/play key - Camera on/off/snapshot key - Camera record video on/off key Video: x960 video with sound recording Video format: AVI Recharge through USB Built in 220mah battery Support slot for TF/Micros Card 1-16GB Video playback on PC Connection Interface: USB 2.0 Battery record time: About mins Bluetooth V2.0: Effective distance of ten meters Talk time.of up to 5-6 hours Stand-by time of up to 150 hours Charge time: About 1hour System Requirement: Windows / XP / Vista / 7 Box Pack- Warranty: 1 Months

Main Fearture: Fog is non-toxic, won’t hurt human body and leave any residues harm to appliance, furniture, computer etc. Fog with other safety sensor and safety control console to form a security net. These sensors contains of PIR, (being used in the most professional alarm system), door and window sensor and other sensors to detect invaders. Fog can be packed by traditional way (wire connection). high-efficiency thermal insulation and protection compartment, to promote energy-efficient. Fog spray time setting and overheating protection internally programmed. When a new fog liquid bottle is replaced each time, time record of fog liquid will reset accordingly. It will send warning signals when fog liquid volume is lower. Internally attached 85DB buzzer at 10CM. Buzzer can generate warning sound when trigger. LED light indicates the status of machine. Product description: The fog machine GS903 as been designed for clients who require a no compromise solution. The best design combined with high performance vapour generation and strong construction. The GS903 is ideal for small to medium retail and office locations and high profile commercial applications. The No Compromise has led to the use of extremely strong stylish case. This provides the required sabotage protection and at the same time makes it possible to design an aesthetically pleasing product suitable for the most sophisticated facilities. The redesigned and improved electronics offer an advanced test activation facility and the most advanced protection against line voltage fluctuations built into any security smoke device on the market. Back up battery 800M3 in 30 Seconds M3 in 60 Seconds The fog bottle's volume is 1.5 litres High quality Design fog sensor density controy Calibrated fluid sensor Uses high quality, non-toxic fog fluid Can be integrated with other security products Optional: GSM Flexible direction spray Box Pack- Warranty: 1 Year

The Sony ICF-SW100S has all the features of a full-sized portable, but is small enough to fit into your shirt pocket. Frequency coverage FM 76-108 MHz AM (LW/MW/SW complete coverage from 150 - 29999 kHz continuously. The PLL quartz frequency digital synthesized tuning system. The dual-conversion radio, synchronous detector with selectable sideband is included to help reduce the effects of adjacent channel interference and fading. The ICF-SW100 even receives SSB single sideband and morse code signals. The world time clock feature provides local and 24-city name/time display. 50 memories station presets allow storage any recall of frequency and station name at a touch of a button. The auto scan feature allows scanning of available stations one at a time with a few seconds pause before resuming or can hold on a specific frequency. Other features include 1 kHz tuning, dual clock/alarm, LED tuning indicator, tone control and FM stereo via headphone jack. The right side of the radio also includes a Line Output Jack for tape recording plus a slide switch for FM Mono/Stereo or Tone. The side of the radio has a power lock switch plus a DX/Local Switch. This radio can be played in the "closed" position. There are small rear speaker ports on the top of the radio, or you may use the supplied stereo ear buds. The bottom of the radio features an international time chart and reset button. Requires two AA cells.

HP x 27" LED XP600AS Display specifications Display size (diagonal) 27" Display type TN Aspect ratio Widescreen (16:9) Resolution (native) x Pixel pitch mm Display colors 72% of NTSC Brightness 300 cd/m² Contrast ratio static; :1 dynamic View angle 170° horizontal 160° vertical Refresh response time 5 ms typical Display scan frequency (horizontal) 24 to 94 kHz Display scan frequency (vertical) 50 to 76 Hz Video input connector 1 VGA 1 DVI-D and HDMI with HDCP User controls Brightness; Contrast; Color; Image Control; OSD control; Management; Language; Information; Factory Reset; Source Control Expansion features Product color Black Tilt and swivel angle Tilt: -5 to + 25° Feature Plug and Play Language selection BrightView Security management Physical security Security Lock Dimensions and Weight Weight 5.7 kg Minimum dimensions (W x D x H) 47 x 18.4 x 65.4 cm Power and operating requirements Power supply type VAC 50 W external power adapter; 19VDC monitor input; Power Consumption: 40W maximum, 30W Typical; stanby mode: Box Pack- Warranty: 1 Year

Item is brand new box pack only 1 week warranty given by us HP Pavilion 23xi cm (23”) IPS Monitor-/+ Appearance Color Rear cover: Jack Black Front decoration and base: HP SP# Iridium Silver Display Specifications Display size (diagonal) 58.4 cm (23") Tilt and swivel angle Tilt angle: -5 to +25° Display type IPS Onscreen controls Brightness Contrast Colour Image control OSD control Management Language Information Factory reset Source control Input connector 1 VGA 1 HDMI 1 DVI-D with HDCP View angle 178° horizontal 178° vertical Display features Anti glare Plug and Play HP Enhance+ resolution Resolution (native) x Aspect ratio Widescreen (16:9) Brightness 250 cd/m² Contrast ratio static :1 dynamic Pixel pitch mm Recommended resolution All VESA modes up to x Hz (native recommended) Response time 7 ms gray to gray Display scan frequency (horizontal) Up to 94 kHz Display scan frequency (vertical) Up to 76 Hz Battery and Power Power supply type External Power Supply Power consumption: 30 W maximum Box Pack - No Warranty

Item is brand new box pack only 1 week warranty given by us HP Pavilion 23xi cm (23”) IPS Monitor-/+ Appearance Color Rear cover: Jack Black Front decoration and base: HP SP# Iridium Silver Display Specifications Display size (diagonal) 58.4 cm (23") Tilt and swivel angle Tilt angle: -5 to +25° Display type IPS Onscreen controls Brightness Contrast Colour Image control OSD control Management Language Information Factory reset Source control Input connector 1 VGA 1 HDMI 1 DVI-D with HDCP View angle 178° horizontal 178° vertical Display features Anti glare Plug and Play HP Enhance+ resolution Resolution (native) x Aspect ratio Widescreen (16:9) Brightness 250 cd/m² Contrast ratio static :1 dynamic Pixel pitch mm Recommended resolution All VESA modes up to x Hz (native recommended) Response time 7 ms gray to gray Display scan frequency (horizontal) Up to 94 kHz Display scan frequency (vertical) Up to 76 Hz Battery and Power Power supply type External Power Supply Power consumption: 30 W maximum

Do you need help in Exam? Do you need help in live speech or do you need help in your job interviews? Here comes the GSM Neckloop Device that let's you talk to your helper in your ear without anyone noticing. Become a Spy like in Movies or Get Help from People during your important tasks. Features: 1) No need any other Bluetooth set, Just the earpiece, New technique 2) Audio power 4.5W.Long Distance reach to 80 CM, big voice, and voice adjustable 3) Can work Mhz all over the world (Pakistan, USA and Other countries compatible) mAh Battery can work for 5 - 6 hours according to the volume Product Description No need mobile phone. GSM Neckloop and earpiece - that're all you need. Spy on People or Forget Exam Cheat with Exam Helper, Speech Helper or Interview Helper Features of GSM Neckloop Two way covert communication via mobile phone networks Optimized inductive coil creates super strong power for earpiece Can support Works with Micro Nano earpeice Built-in top sensitive 38dB microphone to pick up whisper voice Working Principles of GSM Neckloop The new developed GSM Neckloop has a build-in dual band GSM module that works in both of Four Band mobile phone networks. Once insert a GSM SIM card and turn on the power, it will automatically pick-up calls from any mobile phone or telephone. The powerful inductive coil will creat strong signals to drive earpieces within 80cm distance. One pc 35db top sensitive microphone ensures your partner hear the whisper voices, even the GSM Neckloop is hidden under the clothes. The SOS/ Reset button allows you to cut off audio output signals to avoid earpiece detectors. GSM Neckloop has a built-in rechargeable mAh battery. It supports 6 hours talking time. Full recharge takes 4 hours. Demo: http:// playit.pk/ watch?v=JBOIwEqPQ4Q Please call if you want to buy this. It's the only piece available right now. Delivery available all over Pakistan. Box Pack - No Warranty

HP f 23" LED LA176AA Display size (diagonal) 23" Display type TN Aspect ratio Widescreen (16:9) Resolution (native) x Pixel pitch mm Brightness 250 cd/m² Contrast ratio static; :1 dynamic View angle 170° horizontal 160° vertical Refresh response time 2.5 ms Gray to Gray Video input connector 1 VGA 1 DVI-D 1 HDMI 1 HDCP User controls Brightness; Contrast; Color; Image Control; OSD control; Management; Language; Information; Factory Reset; Source Control For orders and inquiries Contact us at following numbers: http://www.eboxsystems.com/HP-LCDs/HP-f-23-LED-LA176AA/flypage_new.tpl.html Box Pack- Warranty: 1 Year

Plug and play, plug directly into your devices with USB port, no needed drivers.With the USB terminal to supply power, the condenser microphone needs no 48V phantom power, battery, or other assistive devices.Cardioid pick-up pattern minimizes background noise and isolates the main sound source.2m long leather cord extends your music space freely and meets your need of all aspects of enjoyment.Wide frequency response (30Hz-20kHz) makes vocal performances sound clear, natural and vibrant. How to setting it?Plug the USB cable to your computer at the same time. Ready for use.If the microphone cannot be used to your device, please check if your device has set itself correctly with the microphone. If not, please follow the step to setting it. Step 1: Open your control panel, and click on /"sound/", a window pops up.Step 2: Select the recording, you will see the microphone is set up or on default.Step 3: Double click the microphone if it is already connected., and then setting yourmicrophone properties. 1.Unplug the USB cable to check whether the pins at the bottom of the mic are loosened.2.Restart computer and re-plug the mic to other USB port.3.If the /"USB PnP Audio Device/" appears in the sound settings of computer(below are the methods how to get to sound settings), the mic is able to work.(Windows: Right click speaker icon on right corner of computer→/"Recording Device/"Mac: Click /"System Preferences/"→/"Sound/"→/"Input/") If the mic disconnects itself without warning, what can I do?Answer: There are two reasons for this situation. One is that the poor connection. The other is that the USB cable is broken. If you have tried to replug the USB cable into the mic, and plug the mic to other USB port, then it will be the problem of the cable. If the mic has hissing what can I do? 1.Re-plug the USB cable into the microphone. If the cable gets loose, noiseis easily generated or transmission of signal may run into problem. 2.Reset computer and re-plug microphone into other USB port. 3.Place it not too close to any power source or computer host. Check whether there's smart-phone near by the USB cable. 4.Set the on-body control of mic and input/output level of computer at 50%-75%. Volume is the culprit for noise. (Windows: Right click speaker icon on right corner of computer→/"Recording Device/"//"Playback Device/"→right click /"USB PnP Device/"/default speaker→/"Properties/"→/"Levels/". If there's /"/"Microphone Boost/"/", turn it to 0-10dB. Mac: /"System Preferences/"→/"Sound/"→/"Input/"//"Output/"→/"Input Volume/"//"Output Volume/") 5.(If using Windows computer,) disable all sound effects. (Right click speaker icon on right corner of computer→/"Playback Device/"→right click the default loudspeaker→/"Enhancements/"→click /"Disable all sound effects/".) Hope these methods could help eliminate noise and make the mic sound better. Colour:black Material:Zinc alloy + plastic Size:14.5*4.8cm Package Contents: 1* microphone 1* USB cable 1* foam cover 1* manual Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.