Rca aux

1 x 3.5mm stereo male connector 2 x RCA stereo male connectors Red and white colour coded RCA connectors for easy connection Fully moulded connectors for added durability

SupportStereo Sounds Compatibility:Connect your PC/Laptop, MP3 Player,, CD Player to HiFi audio, Car stereo system with AUX-Input ConnectorA: Male 3.5mm Jack ConnectorB: RCA Red and White plugs Length:1m./ 1.8 m Color:Black

1 Male 3.5mm to 2 RCA male ports High quality cable Fully molded and shielded to prevent EMI/RFI interference.

High quality cable Available in 1.5M Fully molded and shielded to prevent EMI/RFI interference.

M-Audio AV32 Compact Desktop Speakers for Professional Media Creation (Pair) Product Highlights 3" Polypropylene-Coated Woofer 1" Ferrofluid-Cooled Silk Cone Tweeter Optimage IV Tweeter Wave Guides 10W per Channel into 4 ohms 80 to 20,000 Hz Acoustically-Inert MDF Cabinet RCA and 1/8" Aux Inputs Front-Panel Volume Control Front Panel 1/8" Headphone Output Acoustically-Inert MDF Cabinet M-Audio AV32 Overview The M-Audio AV32 Compact Desktop Speakers for Professional Media Creation (Pair) use acoustically-inert MDF cabinets to eliminate resonances, and 10W per Channel into 4 ohms per channel into a 3" polypropylene woofer in a bass reflex design. The woofer is complemented by a 1" wave-guided ferrofluid cooled silk dome tweeter to deliver a frequency response of 80 to 20,000 Hz and an RMS SPL level of 101.5 dB at 1 meter. The rear panel of the monitors feature RCA inputs for connecting gaming systems, DJ gear, mixers and more. A front panel 1/8" (3.5mm) stereo auxiliary input allows for the connection of a laptop, smartphone, or other mobile device. A front panel 1/8" headphone output allows you to monitor directly using headphones. The monitors are suitable for a wide range of professional and consumer applications. M-Audio AV32 Specs Type Two-way desktop reference speaker Input Connectors 2x RCA (left and right line inputs) 1x 1/8" aux input Low Frequency Driver 3.0" (7.6 cm) polypropylene-coated woofer with high-temperature voice coil High Frequency Driver 1.0" (2.5 cm) silk cone tweeter Frequency Response 80 to 20,000 Hz Crossover Frequency 3.3 kHz RMS Level 101.5 dB at 1 m SNR >90 dB (typical, A-weighted) Polarity Positive signal at "+" input produces outward low-frequency cone displacement Dynamic Power 10 W per channel at 4 ohm Input Impedance 10 kilOhm unbalanced Input Sensitivity 100 mV pink noise input produces 90 dBA output SPL at 1 meter with volume control at maximum Protection RF interference Output current limiting Over temperature Turn on/off transient Subsonic filter Indicators Blue power LED for aligning wave guide Power Requirements 100 to 120 V at 50/60 Hz 200 to 240 V at 50/60 Hz Powered via detachable 2-conductor line cord Cabinet Vinyl-laminated MDF Dimensions (H x W x D) 7.9 x 5.3 x 6.3" (20.1 x 13.5 x 16.0 cm) Weight 11.7 lb (5.3 kg) Packaging Info Package Weight 7.0 lb Box Dimensions (LxWxH) 14.3 x 9.8 x 8.2" Views: 3

Specification Detail Type Digital Channels 32 Inputs - Mic Preamps 4 x XLR (CH 1-4) Inputs - Line 4 x 1/4" (CH 5-8), 4 x RCA (CH 9-12) Inputs - Other No Other Inputs Inputs - Digital No Digital Inputs Outputs - Main 4 x XLR (CH 1-4) , 4 x 1/4" (CH 5-8) Configurable Outputs - Direct No Direct Outputs Outputs - Other 4 x XLR (CH 1-4) , 4 x 1/4" (CH 5-8) Configurable Outputs - Digital 1 x S/PDIF (Optical) Headphones 1 x 1/4" Send/Return I/O 4 x XLR (CH 1-4) , 4 x 1/4" (CH 5-8) Configurable Data I/O 2 x REAC (Cat5e), MIDI In, Out, Thru, 1 x RS-232C I/O Expansion Slots No Expansion Slots Phantom Power 4 Channels (CH 1-4) EQ Bands Channel: 8-band Parametric; Main: 31-band Graphic Aux Sends 8 Aux Buses Busses/Groups 8 Aux Buses, 4 Matrices Faders 17 x 100mm Motorized Channel Inserts No Inserts Effects Yes Talkback Yes Transport Controls No DAW Control No Computer Connectivity 1 x USB, Ethernet Rackmountable Yes Height 7.68" Depth 19.01" Width 18.5" Weight 21.6 lbs. Manufacturer Part Number M-300

Top-notch sound for your desktop system. The compact Studiophile AV 40 powered reference monitors deliver the same proven M-Audio technology favored by producers, recording engineers and musicians around the world. The combination of 4" polypropylene-coated drivers and 3/4" ferrofluid-cooled silk dome tweeters provides punchy lows, crisp highs and a balanced, uncolored response. Custom cabinets with dense wood construction deliver more accurate bass response than you could ever get from plastic multimedia speakers. And for the highest possible fidelity, the Studiophile AV 40 monitors also feature OptImage III wave-guide technology and a 20 watt-per-channel internal amplifier that utilizes Class A/B architecture. The Studiophile AV 40 monitor speakers are the perfect solution for traveling musicians or anyone who wants top-notch sound from their desktop multimedia system. Professional Components—Professional Results The Studiophile AV 40 monitors are designed with the same quality materials and internal electronics that are used in all of M-Audio's acclaimed professional monitors. You'll find features like audiophile-grade Class A/B amplifier architecture and balanced 1/4" TRS inputs in addition to RCAs. It all adds up to a big sound that belies the speakers' small size. With the Studiophile AV 40s, you don't have to give up professional-grade fidelity to enjoy the ease and mobility of a compact monitoring system. Magnetically Shielded for Desktop Use Unchecked, all speakers emit electromagnetic waves that can wreak havoc with your computer's video monitor or a nearby TV. The Studiophile AV 40 monitors are magnetically shielded so that all of your electronic equipment can coexist on your desktop without interference. Features 4" polypropylene-coated woofers 3/4" ferrofluid-cooled silk dome tweeters OptImage III tweeter wave guides for superior imaging 20-watt-per-channel amplifier with Class A/B architecture magnetic shielding 1/4" TRS balanced and RCA unbalanced inputs 1/8" headphone output 1/8" stereo auxiliary input front-panel volume control rear-panel on/off control bass boost control MDF cabinet with bass reflex port design Studiophile AV 40 Powered Reference Speaker System – Pair Specifications: Type: two-way desktop reference monitor Low-frequency Driver: 4" diameter, magnetically shielded and curved cone with high-temperature voice coil High-frequency Driver: 3/4" diameter, magnetically shielded silk dome tweeter Frequency Response: 85Hz - 20kHz Crossover Frequency: 2.7kHz RMS SPL: dB at 1 meter Signal-to-Noise Ratio: > 90dB (typical, A-weighted) Input Connectors: left and right RCA line input, left and right 1/4" TRS input and 1/8" aux input Polarity: positive signal at " " input produces outward low-frequency cone displacement Dynamic Power: 20 watts continuous, per channel into 4 ohms Input Impedance: 10 kOhms unbalanced, 20 kOhms balanced Input Sensitivity: 100 mV pink noise input produces 90dBA output SPL at 1 meter with volume control at maximum Protection: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter Indicator: Blue power LED ring around volume knob on front panel Power Requirements: V/~Hz, V/~Hz; powered via detachable 2-conductor line cord Cabinet: vinyl-laminated MDF Dimensions: 8.75" (H) x 6" (W) x 7.25" (D) Weight: 14lb./6.34 kg Shop No. 345-D, 3rd Floor Star City Shopping Mall, Opp,Bambino Cinema Abdullah Haroon Road Saddar Karachi Pakistan

Top-notch sound for your desktop system. The compact Studiophile AV 40 powered reference monitors deliver the same proven M-Audio technology favored by producers, recording engineers and musicians around the world. The combination of 4" polypropylene-coated drivers and 3/4" ferrofluid-cooled silk dome tweeters provides punchy lows, crisp highs and a balanced, uncolored response. Custom cabinets with dense wood construction deliver more accurate bass response than you could ever get from plastic multimedia speakers. And for the highest possible fidelity, the Studiophile AV 40 monitors also feature OptImage III wave-guide technology and a 20 watt-per-channel internal amplifier that utilizes Class A/B architecture. The Studiophile AV 40 monitor speakers are the perfect solution for traveling musicians or anyone who wants top-notch sound from their desktop multimedia system. Professional Components—Professional Results The Studiophile AV 40 monitors are designed with the same quality materials and internal electronics that are used in all of M-Audio's acclaimed professional monitors. You'll find features like audiophile-grade Class A/B amplifier architecture and balanced 1/4" TRS inputs in addition to RCAs. It all adds up to a big sound that belies the speakers' small size. With the Studiophile AV 40s, you don't have to give up professional-grade fidelity to enjoy the ease and mobility of a compact monitoring system. Magnetically Shielded for Desktop Use Unchecked, all speakers emit electromagnetic waves that can wreak havoc with your computer's video monitor or a nearby TV. The Studiophile AV 40 monitors are magnetically shielded so that all of your electronic equipment can coexist on your desktop without interference. Features 4" polypropylene-coated woofers 3/4" ferrofluid-cooled silk dome tweeters OptImage III tweeter wave guides for superior imaging 20-watt-per-channel amplifier with Class A/B architecture magnetic shielding 1/4" TRS balanced and RCA unbalanced inputs 1/8" headphone output 1/8" stereo auxiliary input front-panel volume control rear-panel on/off control bass boost control MDF cabinet with bass reflex port design Studiophile AV 40 Powered Reference Speaker System – Pair Specifications: Type: two-way desktop reference monitor Low-frequency Driver: 4" diameter, magnetically shielded and curved cone with high-temperature voice coil High-frequency Driver: 3/4" diameter, magnetically shielded silk dome tweeter Frequency Response: 85Hz - 20kHz Crossover Frequency: 2.7kHz RMS SPL: dB at 1 meter Signal-to-Noise Ratio: > 90dB (typical, A-weighted) Input Connectors: left and right RCA line input, left and right 1/4" TRS input and 1/8" aux input Polarity: positive signal at " " input produces outward low-frequency cone displacement Dynamic Power: 20 watts continuous, per channel into 4 ohms Input Impedance: 10 kOhms unbalanced, 20 kOhms balanced Input Sensitivity: 100 mV pink noise input produces 90dBA output SPL at 1 meter with volume control at maximum Protection: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter Indicator: Blue power LED ring around volume knob on front panel Power Requirements: V/~Hz, V/~Hz; powered via detachable 2-conductor line cord Cabinet: vinyl-laminated MDF Dimensions: 8.75" (H) x 6" (W) x 7.25" (D) Weight: 14lb./6.34 kg

Professional Components—Professional Results The Studiophile AV 40 monitors are designed with the same quality materials and internal electronics that are used in all of M-Audio's acclaimed professional monitors. You'll find features like audiophile-grade Class A/B amplifier architecture and balanced 1/4" TRS inputs in addition to RCAs. It all adds up to a big sound that belies the speakers' small size. With the Studiophile AV 40s, you don't have to give up professional-grade fidelity to enjoy the ease and mobility of a compact monitoring system. Magnetically Shielded for Desktop Use Unchecked, all speakers emit electromagnetic waves that can wreak havoc with your computer's video monitor or a nearby TV. The Studiophile AV 40 monitors are magnetically shielded so that all of your electronic equipment can coexist on your desktop without interference. Features 4" polypropylene-coated woofers 3/4" ferrofluid-cooled silk dome tweeters OptImage III tweeter wave guides for superior imaging 20-watt-per-channel amplifier with Class A/B architecture magnetic shielding 1/4" TRS balanced and RCA unbalanced inputs 1/8" headphone output 1/8" stereo auxiliary input front-panel volume control rear-panel on/off control bass boost control MDF cabinet with bass reflex port design Studiophile AV 40 Powered Reference Speaker System – Pair Specifications: Type: two-way desktop reference monitor Low-frequency Driver: 4" diameter, magnetically shielded and curved cone with high-temperature voice coil High-frequency Driver: 3/4" diameter, magnetically shielded silk dome tweeter Frequency Response: 85Hz - 20kHz Crossover Frequency: 2.7kHz RMS SPL: 101.5dB at 1 meter Signal-to-Noise Ratio: > 90dB (typical, A-weighted) Input Connectors: left and right RCA line input, left and right 1/4" TRS input and 1/8" aux input Polarity: positive signal at " " input produces outward low-frequency cone displacement Dynamic Power: 20 watts continuous, per channel into 4 ohms Input Impedance: 10 kOhms unbalanced, 20 kOhms balanced Input Sensitivity: 100 mV pink noise input produces 90dBA output SPL at 1 meter with volume control at maximum Protection: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter Indicator: Blue power LED ring around volume knob on front panel Power Requirements: 100-120V/~50/60Hz, 220-240V/~50/60Hz; powered via detachable 2-conductor line cord Cabinet: vinyl-laminated MDF Dimensions: 8.75" (H) x 6" (W) x 7.25" (D) Weight: 14lb./6.34 kg Condition 10/10

Top-notch sound for your desktop system. The compact Studiophile AV 40 powered reference monitors deliver the same proven M-Audio technology favored by producers, recording engineers and musicians around the world. The combination of 4" polypropylene-coated drivers and 3/4" ferrofluid-cooled silk dome tweeters provides punchy lows, crisp highs and a balanced, uncolored response. Custom cabinets with dense wood construction deliver more accurate bass response than you could ever get from plastic multimedia speakers. And for the highest possible fidelity, the Studiophile AV 40 monitors also feature OptImage III wave-guide technology and a 20 watt-per-channel internal amplifier that utilizes Class A/B architecture. The Studiophile AV 40 monitor speakers are the perfect solution for traveling musicians or anyone who wants top-notch sound from their desktop multimedia system. Professional Components—Professional Results The Studiophile AV 40 monitors are designed with the same quality materials and internal electronics that are used in all of M-Audio's acclaimed professional monitors. You'll find features like audiophile-grade Class A/B amplifier architecture and balanced 1/4" TRS inputs in addition to RCAs. It all adds up to a big sound that belies the speakers' small size. With the Studiophile AV 40s, you don't have to give up professional-grade fidelity to enjoy the ease and mobility of a compact monitoring system. Magnetically Shielded for Desktop Use Unchecked, all speakers emit electromagnetic waves that can wreak havoc with your computer's video monitor or a nearby TV. The Studiophile AV 40 monitors are magnetically shielded so that all of your electronic equipment can coexist on your desktop without interference. Features 4" polypropylene-coated woofers 3/4" ferrofluid-cooled silk dome tweeters OptImage III tweeter wave guides for superior imaging 20-watt-per-channel amplifier with Class A/B architecture magnetic shielding 1/4" TRS balanced and RCA unbalanced inputs 1/8" headphone output 1/8" stereo auxiliary input front-panel volume control rear-panel on/off control bass boost control MDF cabinet with bass reflex port design Studiophile AV 40 Powered Reference Speaker System – Pair Specifications: Type: two-way desktop reference monitor Low-frequency Driver: 4" diameter, magnetically shielded and curved cone with high-temperature voice coil High-frequency Driver: 3/4" diameter, magnetically shielded silk dome tweeter Frequency Response: 85Hz - 20kHz Crossover Frequency: 2.7kHz RMS SPL: 101.5dB at 1 meter Signal-to-Noise Ratio: > 90dB (typical, A-weighted) Input Connectors: left and right RCA line input, left and right 1/4" TRS input and 1/8" aux input Polarity: positive signal at " " input produces outward low-frequency cone displacement Dynamic Power: 20 watts continuous, per channel into 4 ohms Input Impedance: 10 kOhms unbalanced, 20 kOhms balanced Input Sensitivity: 100 mV pink noise input produces 90dBA output SPL at 1 meter with volume control at maximum Protection: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter Indicator: Blue power LED ring around volume knob on front panel Power Requirements: 100-120V/~50/60Hz, 220-240V/~50/60Hz; powered via detachable 2-conductor line cord Cabinet: vinyl-laminated MDF Dimensions: 8.75" (H) x 6" (W) x 7.25" (D) Weight: 14lb./6.34 kg

FEATURES Weight: 4.3kg Serato Scratch Live compatible Advanced battle mixer Direct control of over 40 Scratch Live software controls Each USB port supports six stereo record and four stereo playback channels ASIO and Core Audio Drivers External analog insert for analog effects processor and USB insert for software effects USB aux input for SP-6 sample playback with HP/LP filter, headphone cue and flex Fx assign Magnetic crossfader and channel faders with reverse and contour controls SPECIFICATIONS Dimensions (mm) 36.2cm x 26.7cm x 10.2cm EQ Range 2-band EQ Inputs Analog inputs 4 x stereo unbalanced RCA jacks, mic input Balanced 1/4" TRS & XLR combination jack Outputs Line outputs Send/Return Flex FX return via stereo unbalanced 1/4" TS (tip-sleeve) phone jack, send via stereo unbalanced 1/4" TS phone jack Built-in FX Internal effects engine with filter, flanger, phaser, echo, robot and reverb effects Beat Sampler 32bit floating point audio processing sampled at 48 kHz Power Supply USB self powered