Rc brushed version

Specifications General Type: RC Simulators Brand: HT Features: WiFi FPV,Radio Control Motor Type: Brushed Motor Functions: Camera,Up/down,Forward/backward,Turn left/right,With light,3D rollover Built-in Gyro: Yes Night Flight: Yes Material: Electronic Components,Plastic Level: Beginner Level Age: Above 14 years old Connectivity Remote Control: 2.4GHz Wireless Remote Control Channel: 4-Channels Mode: Mode 2 (Left Hand Throttle) Transmitter Power: 4 x 1.5V AA battery(not included) Dimension and Weight Package weight: 0.811 kg Package size (L x W x H): 26 x 25.8 x 12.2 cm / 10.22 x 10.14 x 4.79 inches Package Contents Package Contents: 1 x Quadcopter, 1 x RC Transmitter, 1 x Screwdriver, 1 x USB Cable, 1 x English + Chinese Manual, 1 x 3.7 V 650mAh Li-po Battery, 4 x Blade Protection Frame, 4 x Blade, 6 x Screw, 1 x Phone Bracket Views: 32

The CC3D EVO provides a crisp feel when flying tricopters, quads, hexas, octocopters, and even fixed wing planes. CC3D EVO CopterControl Hardware Features WIth a function of being directly plugged into the satellite receiver(It needn't conversion cable) Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM. 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer. Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight performance. Software support for Windows, for mac and Linux. Direct high speed USB support with no drivers required, a truly plug and play device. for spektrum satellite receiver support. Futaba S-BUS hardware support. Innovative Flexi-port technology for superior port flexibility. 4Mbits on-board EEPROM for configuration storage. Flexiport CopterControl also offers the innovative Flexi-port which provides either I2C connectivity or a second serial port. Flexi-port gives CopterControl the flexibility to use either I2C and a single serial port or dual serial ports, according to your connectivity needs. Superior user experience OpenPilot has tried to make your experience with the CC3D as easy and trouble-free as possible. Naturally for a high-end product, the hardware is complete; there is nothing to solder. The included RC harness allows you to connect any standard PWM receiver. All CopterControl boards are tested before shipping and come with bootloader already flashed. A standard mini-USB cable (not included) is used to load the latest firmware and configure everything for your unique airframe. The OpenPilot project, whist still young, it trying to make Open Source much more user friendly. OpenPilot software is designed to be used by everybody! All major operating systems are supported and install packages are provided. The software is all Free software under the GPLv3 license and not only are you welcome to hack it, but we encourage it! Sensors and Components 3-axis Gupports several common RC inputs: 6 PWM channels, combined PPM, for spektrum/JR DSM2, Supports several common RC inputs: 6 PWM channels, combined PPM, for spektrum/JR DSM2, DSMJ, for satellites, and Futaba S.Bus receivers. Simultaneous support for multiple receivers. ReceiverPort functions (configurable): 6 PWM input channels or combined PPM stream, 4 PWM output channels MainPort functions (configurable): serial telemetry (default), GPS, S.Bus, for spektrum/JR satellites FlexiPort (configurable): serial telemetry, GPS, for spektrum/JR satellites, or I2C peripherals (under development) 10 PWM outputs to servos or ESC’s, or for camera stabilization Camera stabilization: supports up to 3-axis camera mounts with stabilization and manual control from any of configured receivers. Onboard USB connectivity for easy configuration. USB and serial telemetry and configuration Supported by powerful OpenPilot GCS 4 Mbit onboard memory 3C Quaternion based complementary filter running at 500Hz Package included: 1 PC CC3D EVO flight controller 1 PC plastic shell 1 set wires Views: 5

The CC3D EVO provides a crisp feel when flying tricopters, quads, hexas, octocopters, and even fixed wing planes. CC3D EVO CopterControl Hardware Features WIth a function of being directly plugged into the satellite receiver(It needn't conversion cable) Powerful STM32 32-bit microcontroller running at 90MIPs with 128KB Flash and 20KB RAM. 3-axis high-performance MEMs gyros and 3-axis high-performance MEMs accelerometer. Tiny 36mmx36mm 4 layer PCB for superior electrical noise reduction and flight performance. Software support for Windows, for mac and Linux. Direct high speed USB support with no drivers required, a truly plug and play device. for spektrum satellite receiver support. Futaba S-BUS hardware support. Innovative Flexi-port technology for superior port flexibility. 4Mbits on-board EEPROM for configuration storage. Flexiport CopterControl also offers the innovative Flexi-port which provides either I2C connectivity or a second serial port. Flexi-port gives CopterControl the flexibility to use either I2C and a single serial port or dual serial ports, according to your connectivity needs. Superior user experience OpenPilot has tried to make your experience with the CC3D as easy and trouble-free as possible. Naturally for a high-end product, the hardware is complete; there is nothing to solder. The included RC harness allows you to connect any standard PWM receiver. All CopterControl boards are tested before shipping and come with bootloader already flashed. A standard mini-USB cable (not included) is used to load the latest firmware and configure everything for your unique airframe. The OpenPilot project, whist still young, it trying to make Open Source much more user friendly. OpenPilot software is designed to be used by everybody! All major operating systems are supported and install packages are provided. The software is all Free software under the GPLv3 license and not only are you welcome to hack it, but we encourage it! Sensors and Components 3-axis Gupports several common RC inputs: 6 PWM channels, combined PPM, for spektrum/JR DSM2, Supports several common RC inputs: 6 PWM channels, combined PPM, for spektrum/JR DSM2, DSMJ, for satellites, and Futaba S.Bus receivers. Simultaneous support for multiple receivers. ReceiverPort functions (configurable): 6 PWM input channels or combined PPM stream, 4 PWM output channels MainPort functions (configurable): serial telemetry (default), GPS, S.Bus, for spektrum/JR satellites FlexiPort (configurable): serial telemetry, GPS, for spektrum/JR satellites, or I2C peripherals (under development) 10 PWM outputs to servos or ESC’s, or for camera stabilization Camera stabilization: supports up to 3-axis camera mounts with stabilization and manual control from any of configured receivers. Onboard USB connectivity for easy configuration. USB and serial telemetry and configuration Supported by powerful OpenPilot GCS 4 Mbit onboard memory 3C Quaternion based complementary filter running at 500Hz Package included: 1 PC CC3D EVO flight controller 1 PC plastic shell 1 set wires Views: 213

V911-pro helicopter can satify you whatever rainy or sunny,even when outdoor wild grade 4-5. Description: Item Name:WLtoys V911-pro 2.4G 4CH RC Helicopter Frequency:2.4G Channel:4CH Length:260mm Height:80mm Flight Distance:100M Flight Time:Approx 8 Minutes Charge Time:About 60 Minutes Transmitter Battery: 6 x AA Battery(Not Included) Helicopter Battery: Rechargable 3.7V 150mAh (Included) Upgraded Canopy,Main Shaft,Landing Skid,Tail Boom Function: Up,Down,Forward,Backward,Turn left,Turn right,360° turn,Left-side flying,Right-side flying,Hover Advantages of new version V911-pro:New canopy design with higher quality,more shatterproof,Strengthened fuselage structure which is small but perfectly formed,Strengthened landing skid has been redesigned,Improved design tail pipes wire will no longer be troubled by replaceing parts. Package Included: 1 x V911-pro Helicopter 2 x Battery 1 x Transmitter 1 x Charger Box 1 x USB Cable 2 x Main Blades 1 x Tail Blade 1 x Manual Views: 5

This Simulator Adapter can be used with any make of radio, even one with no trainer port and can be used as either a wireless or hard-wire Simulator Adapter. It can be used with any make of radio when used in conjunction with a reciever or can it be used with standard 3.5mm Jack Lead (supplied), supports XTR, Aerofly, FMS, Phoenix 3.0, 4.0, Realflight G3, G4, G5. *Note: This is the update version with micro USB connector. Includes: Wireless/Hardwired Adapter USB Cable 3.5mm Jack Lead Male/Male Receiver to Adapter Leads Instructions Views: 3

Specifications General Type: RC Simulators Brand: HT Features: WiFi FPV,Radio Control Motor Type: Brushed Motor Functions: Camera,Up/down,Forward/backward,Turn left/right,With light,3D rollover Built-in Gyro: Yes Night Flight: Yes Material: Electronic Components,Plastic Level: Beginner Level Age: Above 14 years old Connectivity Remote Control: 2.4GHz Wireless Remote Control Channel: 4-Channels Mode: Mode 2 (Left Hand Throttle) Transmitter Power: 4 x 1.5V AA battery(not included) Dimension and Weight Package weight: 0.811 kg Package size (L x W x H): 26 x 25.8 x 12.2 cm / 10.22 x 10.14 x 4.79 inches Package Contents Package Contents: 1 x Quadcopter, 1 x RC Transmitter, 1 x Screwdriver, 1 x USB Cable, 1 x English + Chinese Manual, 1 x 3.7 V 650mAh Li-po Battery, 4 x Blade Protection Frame, 4 x Blade, 6 x Screw, 1 x Phone Bracket Cash on Delivery All over Pakistan Note = Delivery Charges extra including depend on your city

Description: Brand Name: Hubsan Item No.H107L Item Name: Upgraded Hubsan X4 RC Quadcopter Motor (x4): Coreless Motor Frequency: 2.4GHz Battery: 3.7V 240mAh Flight time: above 9 minutes Charging time:30 minutes Features: Latest 6-axis flight control system with adjustable gyro sensitivity Permits super stable flight Lightweight airframe with nice durability 4-ways flip(left,right,forward,backward) USB charging cable allows to charge by computer. Flying both indoor and outdoor New Huban x4 VS Old Hubsan X4: Difference New Hubsan X4 Old Hubsan X4 LED add 4pcs LED for much batter night flight None Soft pad add 4pcs soft pads act as a cushion to protect your X4 in sudden or misoperetion None Oscillator SMT oscillator DIP oscillator Anti-flip add anti-flip function in expert mode to strengthen the performance Distance between motor and roto Distance has shortened,protect the motor from loosing after crash The R/C's control distance 100m 30m Cover add protection cover,which can protect the rotor blades form crashing into the wall or floor upside down None Material reinforced Hi-tech composite plastic H107L BNF version,please click here! H107L BNF with battery,please click here! Package Included: 1 x Upgraded Hubsan X4 H107 RC Quadcopter 1 x transmitter 1 x USB Charging Cable 1 x 3.7V 240mAh Li-Po Battery 1 x Extra blade set Views: 38

Description Short Description: Product Type: Stunt Car Age range: From 6 years and above Color: Grey Material: Plastic Structure: Plastic Trajectory: In all directions Transport: Ground Transport: SUV Weight: 600g Power Source: Battery Powered Theme: Sport Control Distance: 30-50m Playtime: 15-20mins Product Description: EXCELLENT ANTI-INTERFERENCE: With a fully functional 2.4Ghz wireless remote control, you can easily control this stunt car within fifty meters Because of its anti-interference, it can achieve multi-player simultaneous running without remote confusion. 50-MINS RUN TIME AND LED HEADLIGHT: Kids would never get depressed anymore by the need to charge stunt car frequently. remote control car’s run time can reach 50 mins when fully charged, according to professional tests. LED Headlight makes this remote-controlled car even more fantastic! BUILT-IN BATTERY MORE CONVENIENT AND LED LIGHTS ON: This RC racing car is a rechargeable version and requires only a USB charger. It can be used for about 30 minutes on a full charge. LED light, flashing red and blue and light up day or night Creates endless fun for kids. HIGH-QUALITY MATERIAL: High-quality ABS plastic, firm and durable car body, and The tires are made of rubber, easy to overcome any outdoor condition. EASY TO OPERATE: The pack contains 1 instruction manual which makes this car really very easy for kids to operate. Kids can know all the tricks to operate the stunt car and have ultimate fun while playing with it. STYLISH LOOK: The car has very stylish looks and unique tires which will make an amusing sound and add thrill to the playtime. The wonderful look of the car along with its unique tires make it way too attractive and differentiate it from all the other ordinary RC cars in the market. MULTI-ROLLER TIRES AND DURABLE DESIGN: Double side can be driven, will even drive when it’s upside down, go 45° sideways drift, 180° flip and 360° rotate. The Truck tire consists of 7 small wheels. With very flexible wheels, specially designed non-slip tires and motors provide strong power strength, making it easy to move on mountain roads, floors, and grassland. The car has a strong grip, and it is more resistant to pressure and wear. ENGINEERED FOR SPEED AND STUNT DRIVING: drive on both sides, perform fast rotational spin, twist, and extremely cool drift mode. Use your imagination! Weight: 0.4 SKU: LT-3555-1