Power command

We are the Only one Cummins Trained Specialist with all Cummins products across the Pakistan we offer: PCC 2100 Motherboard Services and repair Software Update & Calibration Contact Us: 0 2 1 - 3 4 6 8 2 7 7 7 0 3 4 5 3 0 9 0 2 6 4

DELL POWER EDGE SERVERS RAID CONTROLLER CARDS.. Works in the following Dell Servers: +Del lPower Edge Rack Server +Dell Power Edge Tower Server +Dell Power Edge Rack Server +Dell Power Edge Tower Server +Dell Power Vault NX Rack Server +Many More Servers Specs: +Intel IOP333 Processor (11w TDP, 110Tj(max)) 256MB 400MHz ECC Registered DDR2 memory (upgradable*) +RAID levels , and 50 +PCIe x8 +2 (SFF-) SAS internal connectors (support for 8 drives) +LSI Manufactured (and flashable) +Xp, Vista Supported +Does not support Native Command Queuing +Does not support 3TB+ drives * 400MHz ECC-registered DIMMs with x16 DRAM components. Installing unsupported memory causes the system to hang at POST. You have to buy x8 or x16 Memory Modules: x8 = 9 Chips (1 ECC) x16 = 5 Chips (1 ECC) Contact: SA Computer SHOP# 77, 1ST FLOOR MAKKAH CENTER HALL ROAD LAHORE Cell: Ptcl# (Note) Don't send me sms never reply Just call only interested Person. Condition: - Warranty: 1 Months

Dell Power Edge Perc 5i SAS RAID Controller With Battery Available Specs: + Intel IOP333 Processor (11w TDP, 110Tj(max)) + 256MB 400MHz ECC Registered DDR2 memory (upgradable*) + RAID levels , and 50 + PCIe x8 + 2 (SFF-) SAS internal connectors (support for 8 drives) + LSI Manufactured (and flashable) + Xp, Vista Supported + Does not support Native Command Queuing + Does not support 3TB+ drives + 400MHz ECC-registered DIMMs with x16 DRAM components. Installing unsupported memory causes the system to hang at POST. You have to buy x8 or x16 Memory Modules: x8 = 9 Chips (1 ECC) x16 = 5 Chips (1 ECC) Contact: SA Computer Shop# st Floor MAKKAH Center Hall Road Lahore (Note) Don't send me sms never reply Just call only interested Person. We Have Delivery facility In Lahore Region. Pray For Us. Condition: - Warranty: 1 Months

Description: Details iShopping.pk brings you the best price for TP-Link JetStream 24-Port Gigabit L2 Managed Switch with 4 SFP Slots (TL-SG3428-V1) with express shipping all over Pakistan.   Details: Full Gigabit Ports: 24× gigabit RJ45 ports and 4× gigabit SFP Slots provide high-speed connections. Integrated into Omada SDN: Zero-Touch Provisioning (ZTP)*, Centralized Cloud Management, and Intelligent Monitoring. Centralized Management: Cloud access and Omada app for ultra-convenience and easy management. Static Routing: Helps route internal traffic for more efficient use of network resources. Robust Security Strategies: IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm control, DHCP Snooping, 802.1X, Radius Authentication, and more. Optimize Voice and Video Applications: L2/L3/L4 QoS and IGMP snooping. Standalone Management: Web, CLI (Console Port, Telnet, SSH), SNMP, RMON, and Dual Image bring powerful management capabilities Software Defined Networking (SDN) with Cloud Access Omada’s Software Defined Networking (SDN) platform integrates network devices, including access points, switches and gateways, providing 100% centralized cloud management. Omada creates a highly scalable network—all controlled from a single interface. Seamless wireless and wired connections are provided, ideal for use in hospitality, education, retail, offices, and more. Secure Networking Security features include IP-MAC-Port-VID Binding, Port Security, Storm Control, and DHCP Snooping to defend against a range of network threats. An integrated list of common DoS attacks is available, making it easier than ever to prevent them. In addition, the Access Control Lists (ACL, L2 to L4) feature restricts access to sensitive network resources by denying packets based on source and destination MAC address, IP address, TCP/UDP ports, or VLAN ID. Users’ network access can be controlled via 802.1X authentication, which works with a RADIUS/Tacacs+ server to grant access only when valid user credentials are provided. Advanced QoS Voice and video traffic can be prioritized based on IP address, MAC address, TCP port number, UDP port number, and more. With QoS (Quality of Service), voice and video services remain smooth, even when bandwidth is in short supply. Abundant L2 and L2+ Features A complete lineup of L2 features are supported including 802.1Q VLAN, Port Mirroring, STP/RSTP/MSTP, Link Aggregation Control Protocol, and 802.3x Flow Control. Advanced IGMP Snooping ensures the switch intelligently forwards multicast streams to only the appropriate subscribers, cutting out unnecessary traffic, while IGMP throttling & filtering restrict each subscriber on a port level to prevent unauthorized multicast access. Static Routing is a simple way of segmenting the network and internally routs traffic through the switch for improved efficiency. ISP Features QinQ, L2PT, PPPoE ID Insertion, and IGMP authentication features are provided, developed with service providers in mind. 802.3ah OAM and Device Link Detection Protocol (DLDP) offer easy monitoring and troubleshooting of Ethernet links. IPv6 Support IPv6 functions such as Dual IPv4/IPv6 Stack, MLD Snooping, IPv6 ACL, DHCPv6 Snooping, IPv6 Interface, Path Maximum Transmission Unit (PMTU) Discovery and IPv6 Neighbor Discover guarantee your network is ready for the Next Generation Network (NGN) without upgrading your hardware. Enterprise Level Management Features Easy to manage via an intuitive web-based Graphical User Interface (GUI) or an industry-standard Command Line Interface (CLI). For both management methods, traffic is protected through SSL or SSH encryption. SNMP (v1/v2c/v3) and RMON support enables the switch to be polled for valuable status information and to send traps on abnormal events.   Specifications: HARDWARE FEATURES Interface • 24× 10/100/1000 Mbps RJ45 Ports • 4× Gigabit SFP Slots • 1× RJ45 Console Port • 1× Micro-USB Console Port Fan Quantity Fanless Power Supply 100-240 V AC~50/60 Hz Dimensions (W x D x H) 17.3 × 7.1 × 1.7 in (440 × 180 × 44 mm) Mounting Rack Mountable Max Power Consumption 19.22 W (110 V/60 Hz) Max Heat Dissipation 65.58 BTU/h (110 V/60 Hz) PERFORMANCE Switching Capacity 56 Gbps Packet Forwarding Rate 41.66 Mpps MAC Address Table 8K Jumbo Frame 9 KB SOFTWARE FEATURES Quality of Service • 8 priority queues • 802.1p CoS/DSCP priority • Queue scheduling - SP (Strict Priority) - WRR (Weighted Round Robin) - SP+WRR • Bandwidth Control - Port/Flow based Rating Limiting • Smoother Performance • Action for Flows - Mirror (to supported interface) - Redirect (to supported interface) - Rate Limit - QoS Remark L2 and L2+ Features • Link Aggregation - Static link aggregation - 802.3ad LACP - Up to 8 aggregation groups and up to 8 ports per group • Spanning Tree Protocol - 802.1d STP - 802.1w RSTP - 802.1s MSTP - STP Security: TC Protect, BPDU Filter, BPDU Protect, Root Protect, Loop Protect • Loopback Detection - Port-based - VLAN based • Flow Control - 802.3x Flow Control - HOL Blocking Prevention • Mirroring - Port Mirroring - CPU Mirroring - One-to-One - Many-to-One - Tx/Rx/Both L2 Multicast • Supports 511 (IPv4, IPv6) IGMP groups • IGMP Snooping - IGMP v1/v2/v3 Snooping - Fast Leave - IGMP Snooping Querier - IGMP Authentication • IGMP Authentication • MVR • MLD Snooping - MLD v1/v2 Snooping - Fast Leave - MLD Snooping Querier - Static Group Config - Limited IP Multicast • Multicast Filtering: 256 profiles and 16 entries per profile VLAN • VLAN Group - Max 4K VLAN Groups • 802.1q Tagged VLAN • MAC VLAN: 12 Entries • Protocol VLAN: Protocol Template 16, Protocol VLAN 16 • GVRP • VLAN VPN (QinQ) - Port-Based QinQ - Selective QinQ • Voice VLAN Access Control List • Time-based ACL • MAC ACL - Source MAC - Destination MAC - VLAN ID - User Priority - Ether Type • IP ACL - Source IP - Destination IP - Fragment - IP Protocol - TCP Flag - TCP/UDP Port - DSCP/IP TOS - User Priority • Combined ACL • Packet Content ACL • IPv6 ACL • Policy - Mirroring - Redirect - Rate Limit - QoS Remark • ACL apply to Port/VLAN Security • IP-MAC-Port Binding - DHCP Snooping - ARP Inspection - IPv4 Source Guard • IPv6-MAC-Port Binding - DHCPv6 Snooping - ND Detection - IPv6 Source Guard • DoS Defend • Static/Dynamic Port Security - Up to 64 MAC addresses per port • Broadcast/Multicast/Unicast Storm Control - kbps/ratio/pps control mode • IP/Port/MAC based access control • 802.1X - Port based authentication - Mac based authentication - VLAN Assignment - MAB - Guest VLAN - Support Radius authentication and accountability • AAA (including TACACS+) • Port Isolation • Secure web management through HTTPS with SSLv3/TLS 1.2 • Secure Command Line Interface (CLI) management with SSHv1/SSHv2 IPv6 • IPv6 Dual IPv4/IPv6 • Multicast Listener Discovery (MLD) Snooping • IPv6 ACL • IPv6 Interface • Static IPv6 Routing • IPv6 neighbor discovery (ND) • Path maximum transmission unit (MTU) discovery • Internet Control Message Protocol (ICMP) version 6 • TCPv6/UDPv6 • IPv6 applications - DHCPv6 Client - Ping6 - Tracert6 - Telnet (v6) - IPv6 SNMP - IPv6 SSH - IPv6 SSL - Http/Https - IPv6 TFTP L3 Features • 16 IPv4/IPv6 Interfaces • Static Routing - 48 static routes • Static ARP • 316 ARP Entries • Proxy ARP • Gratuitous ARP • DHCP Server • DHCP Relay • DHCP L2 Relay Management • Web-based GUI • Command Line Interface (CLI) through console port, telnet • SNMPv1/v2c/v3 - Trap/Inform - RMON (1, 2, 3, 9 groups) • SDM Template • DHCP/BOOTP Client • 802.1ab LLDP/LLDP-MED • DHCP AutoInstall • Dual Image, Dual Configuration • CPU Monitoring • Cable Diagnostics • EEE • Password Recovery • SNTP • System Log Advanced Features • Support Omada Hardware Controller (OC200/OC300), Software Controller, Cloud-Based Controller • Automatic Device Discovery • Batch Configuration • Batch Firmware Upgrading • Intelligent Network Monitoring • Abnormal Event Warnings • Unified Configuration • Reboot Schedule • ZTP (Zero-Touch Provisioning)* OTHERS Certification CE, FCC, RoHS Environment • Operating Temperature: 0–45 ℃ (32–113 ℉); • Storage Temperature: -40–70 ℃ (-40–158 ℉) • Operating Humidity: 10–90% RH non-condensing • Storage Humidity: 5–90% RH non-condensing

D-Link DGS-1510-28X Gigabit Stackable Smart Managed Switch with 10G Uplinks 24 x 10/100/1000BASE-T ports 4 x 10G SFP+ ports Layer 2 management and security with Layer 3 capabilities Static Routing and MSTP Industry Standard CLI with 10G SFP+ stacking The D-Link DGS-1510 Series is the latest generation of Smart Managed switches with 10G SFP+ fibre ports for physical stacking or uplinks. The combination of high bandwidth connections, an Industry Standard CLI, and PoE options make the DGS-1510 Series ideal for Small-Medium Enterprise environments. Fully‑Featured with Layer 3 Traffic Management The DGS-1510 family has advanced network management options, accessible via Industry Standard CLI, Serial Port Console or the Web-based UI, that equip your business with network capabilities such as VLANs, multiple spanning tree protocol (MSTP), link aggregation (LACP), static routing, multiple firmware images,and multiple configuration files. 10G SFP+ Stacking Create a physical stack of up to 6 units in a fault‑tolerant ring or linear topology using Direct Attach Cables or any compatible SFP+ transceivers for a total of 288 Gigabit ports. The remaining uplink ports can be used for other functions, offering 10G connectivity to core networks and servers. 1 With powerful security features like IGMP snooping, access control lists, port security, and the unique D-Link Safeguard Engine that protects your network against malicious denial-of-service attacks from broadcast, multicast and unicast flooding, the DGS-1510 family is a versatile solution for enterprise network environments.  Max PoE with budgets up to 740W 2 Choose between 193W and 370W power budget options. Or utilise a total of 740W when adding a redundant power supply to the DGS-1510-52XMP. Free Network Design and Management Software D-Link’s free Network Assistant (DNA) displays all connected devices and speeds up the first time configuration. The free D-View 7 Network Management System comes with a license for 25 nodes and 2 probes and full access to the management tools. Optional upgrade licenses allow you to broaden your network and analysis. Smart Energy‑Saving Design D-Link Green technology enables the DGS-1510 series to save power without sacrificing performance. The entire series of switches feature a smart fan that adjusts fan-speed and only powers on above a certain temperature. With advanced silicon technology, the DGS-1510 series saves up to 73% of energy compared to normal switches. Tolly-Certified Tolly, a leading global provider of third-party validation services for vendors of IT products and services, independently tested and verified the outstanding performance of the DGS-1510-28X. “The D-Link Systems switch matched the L2 throughput of the other switches. In addition, the D-Link has a significantly lower purchase price and consumes much less power than the other switches evaluated.” Specifications 1000Base-T Interface 24 10G SFP+ Interface 4 Auto MDI/MDIX Yes Console Port Yes 10/100/1000BASE-T ports 24 10G SFP+ ports 4 Max. Packet Forwarding Rate 95.24 Mpps Switch Capacity 128 Gbps Store & Forwarding Forwading Yes Dimension 440mm x 210mm x 44mm Weight 2.00 kg Operation Temperature -5 -50°C Storage Temperature -20-70°C Operation Humidity 0% ~ 95% RH Storage Humidity 0% ~ 95% RH Maximum Power Consumption 22.3 W Standby Power Consumption 14.6 W/100V, 15.2 W/240V Maximum Heat Dissipation 76.04 BTU/hr Acoustic 42.7 dB(A) MTBF 516,593 hours Power Input 100 - 240 VAC CPU Speed 400MHz DRAM Size 256MB Flash Memory Size 32MB Packet Buffer Size 1.5MB FAN 1 DC Fan Comply with RoHS 6 Yes Energy Efficiency Ethernet (EEE) Yes Power Saving By Link Status Yes Power Saving By LED Shut-Off Yes Power Saving By Port Shut-Off Yes Power Saving By System Hibernation Yes Physical Stacking Yes Physical Stacking Bandwidth 40 G Units Per Physical Stack 6 D-Link Single IP Management (SIM) Yes Units Per SIM Stack 32 MAC Address Table Size 16384 Black Hole MAC Address Yes 802.3x Flow Control Yes Head-of-line (HOL) Blocking Prevention Yes 802.1D Spanning Tree (STP) Yes 802.1w Rapid Spanning Tree (RSTP) Yes 802.1s Multiple Spanning Tree (MSTP) Yes Root Restriction Yes G.8032 ERPS Yes 802.1AX Link Aggregation Yes 802.3ad Link Aggregation Yes Link Aggregation Group Per Device 32 Max Port Per Link Aggregation Group 8 Port Mirroring Yes Flow-based (ACL) mirroring Yes Jumbo Frame 9216 Loopback Detection (LBD) Yes IGMP Snooping Yes Max IGMP Snooping Groups 512 IGMP Snooping Fast Leave Yes IGMP Proxy Reporting Yes MLD Snooping Yes MLD Snooping Groups Yes MLD Snooping Fast Leave Yes MLD Proxy Reporting Yes 802.1Q VLAN Yes VLAN Groups 4094 Port-based VLAN Yes 802.1v Protocol-based VLAN Yes MAC-based VLAN Yes Voice VLAN Yes Auto Surveillance VLAN Yes, 2.1 GVRP Yes Asymmetric VLAN Yes IP Interface Yes Max Number of IP Interface 16 ARP Yes ARP Entries 512 Gratuitous ARP Yes ND Entries Yes UDP Helper Yes Default Route Yes Static Route Yes Number of Queue 8 Class of Service (CoS) Yes Remark 802.1p priority Yes Remark ToS/DSCP Yes Rate Limiting Yes Queue Handling Yes Strict Priority Queue (SPQ) Yes Weighted Round Robin (WRR) Yes Deficit Round Robin (DRR) Yes SPQ + WRR Yes Port-based Bandwidth Control Yes Max Access Control List (ACL) Entries Yes MAC Access List Yes IP Access List Yes IPv6 Access List Yes Time based ACL Yes SSH Yes SSL Yes Port Security Yes Broadcast/Multicast/Unicast Storm Control Yes Traffic Segmentation Yes IP Source Guard Yes DHCP Snooping Yes IPv6 Snooping Yes Dynamic ARP Inspection (DAI) Yes DHCPv6 Guard Yes IPv6 Route Advertisement (RA) Guard Yes IPv6 ND Inspection Yes Duplicate Address Detection (DAD) Yes D-Link Safeguard Engine Yes DHCP Server Screening Yes ARP Spoofing Prevention Yes BPDU Attack Protection Yes DoS Attack Prevention Yes 802.1X Yes Port based 802.1X Authentication Yes Host based 802.1X Authentication Yes Identity Driven 802.1X Policy Assignment Yes Web-based Access Control (WAC) Yes Port based WAC Authentication Yes Host based WAC Authentication Yes Identity Driven WAC Policy Assignment Yes Japanese Web-based Access Control (JWAC) Yes Port based JWAC Authentication Yes Host based JWAC Authentication Yes Identity Driven JWAC Policy Assignment Yes MAC-based Access Control (MAC) Yes Port based MAC Authentication Yes Host based MAC Authentication Yes Identity Driven MAC Policy Assignment Yes Compound Authentication Yes Guest VLAN Yes Authentication for Management Access Yes Privilege Level for Management Access 5 RADIUS Yes RADIUS Accounting Yes TACACS+ Yes TACACS+ Accounting Yes Optical Transceiver Digital Diagnostic Monitoring (DDM) Yes Cable Diagnostics Yes Network Time Protocol (NTP) Yes Simple Network Time Protocol (SNTP) Yes Web-based GUI Yes Command Line Interface (CLI) Yes Telnet Server Yes Telnet Client Yes SNMP Yes SNMP Trap Yes TFTP Client Yes ZModem Yes System Log Yes RMONv1 Yes LLDP Yes LLDP-MED Yes D-Link Discover Protocol (DDP) Yes (v0.25) DHCP/BootP Client Yes DHCP Auto-configuration Yes DHCP relay Yes Flash file system Yes Multiple Images Yes Multiple Configurations Yes Editable Login Banner Yes Editable System Prompt Yes DNS Client Yes Debug Command Yes Password Encryption Yes Ping Yes Traceroute Yes sFlow Yes D-Link Network Assistant Yes Smart Wizard Yes SSH Yes SSL Yes

VIDEOS WE ARE LOGITECH G. FEATURES 9 PROGRAMMABLE CONTROLS At your command Achieve great results with the default configuration straight out of the box. Or, set up one-button triggers for actions that typically require digging into menus. Put push-to-talk communications in easier reach. Temporarily down-shift DPI. Reassign any game command or multi-command macro to any one of nine programmable buttons with optional  Logitech Gaming Software (LGS).* *Some profile settings require Logitech Gaming Software, available at gaming.logitech.com/support  . SCULPTED, AMBIDEXTROUS SHAPE Comfort is king Versatile design in a compact shape, this mouse is built for comfort and durability. USER-CONFIGURABLE LIGHTING Knowledge is power Assign a unique color and identity to each user profile with up to seven color variations to know what settings are active during game play. ONBOARD MEMORY PROFILES A mouse with a brain Configure your mouse once and have it remember. Every game requires its own unique setup, be it World of Warcraft or Guild Wars 2. Program all nine buttons across so you can bring your setup to other PCs. ON-THE-FLY DPI SWITCHING Be ready in an instant Make the right moves in any game situation. Shift through multiple DPI settings for quickly selecting on-screen options or scanning the game map (up to 2500 DPI) or downshifting to make pixel-precise sniper targeting or unit selection (250 DPI) using conveniently placed buttons. Learn more about Logitech Gaming Software. 1-MILLISECOND REPORT RATE The science of speed Be confident that your every command is executed as fast as possible. Up to eight times faster than a standard USB mouse, G300 captures your moves as fast as you can make them. DURABLE BUILD Built to outlast Engineer tests rated the primary buttons at 10 million clicks and the feet of travel at 250 km. Able to survive the most intense gaming sessions, G300 can go for as long as you can. SLICK FEET A material advantage The low-friction polytetrafluoroethylene feet eliminate friction on nearly any surface for smoother motions, precise cursor movements and improved accuracy. EASY-TO-USE CONFIGURATION SOFTWARE Make it yours—easily Use the optional Logitech Gaming Software to perfectly match commands to your favorite games. Simple drag-and-drop settings allow you to customize button and tracking profiles for any game you play. Or, use pre-configured customizations with automatic game detection. Learn more about Logitech Gaming Software. SPECIFICATIONS PART NUMBER 910-004347 WARRANTY INFORMATION 1-Year Limited Hardware Warranty SYSTEM REQUIREMENTS Windows® 8, Windows® 7, or Windows Vista® Available USB port Internet connection for optional software download* PACKAGE CONTENTS Mouse User documentation TECHNICAL SPECIFICATIONS Tracking   Resolution: 250 – 2,500 dpi Max. acceleration: >20G* Max Speed: 60 ips (1.5m/s)* * Tested on Logitech G240 Gaming Mouse Pad Responsiveness USB data format: 16 bits/axis USB report rate: 1000 Hz (1ms) Glide Dynamic coefficient of friction:* 0.09 μ (k) Static coefficient of friction:* 0.14 μ (s) * Tested on wood-veneer desktop. Durability Buttons (Left / Right): 10 million clicks Feet: 250 kilometers Physical specifications Height: 113 mm (4.45 in) Width: 72 mm (2.83 in) Depth: 40 mm (1.57 in) Weight: 109 g, mouse plus cable (3.84 oz) Weight: 80 g, mouse only (2.82 oz)                                                               Most Helpful  Most Recent     

Features - Controlling MCU power supply V or V. USB can be used to power the chip on servos board.And it can be chosen automatically.With the USB reverse protection,it can protect your computer from been hurted by the reverse USB. - Servos power supply DC depends on the motors, generally 5V DC - Control channels 16. can be controlled at the same time and the accuracy can be adjusted - Communication Input USB or UART TTL or USART. The Bluetooth or some other wireless module can be used to make the controlling - Signal Output PWM Accuracy 1us. - Servo motor resolution 1us, 0.09 degrees. - Baud Raterecognized automatically - Servo motors supported Futaba, Hitec or some other Servos Motor controlled by PWM. - Control mode USB and UART TTL to accept command. Comes with USB data wire and PC controlling software - Flash onboard 512K ROMIf every command is used to control the motors at Box Pack - No Warranty

Features - Controlling MCU power supply V or V. USB can be used to power the chip on servos board.And it can be chosen automatically.With the USB reverse protection,it can protect your computer from been hurted by the reverse USB. - Servos power supply DC depends on the motors, generally 5V DC - Control channels 16. can be controlled at the same time and the accuracy can be adjusted - Communication Input USB or UART TTL or USART. The Bluetooth or some other wireless module can be used to make the controlling - Signal Output PWM Accuracy 1us. - Servo motor resolution 1us, 0.09 degrees. - Baud Rate recognized automatically - Servo motors supported Futaba, Hitec or some other Servos Motor controlled by PWM. - Control mode USB and UART TTL to accept command. Comes with USB data wire and PC controlling software - Flash onboard 512K ROMIf every command is used Box Pack - No Warranty

Features - Controlling MCU power supply 6.5-12 V or 3.5-5.5V. USB can be used to power the chip on servos board.And it can be chosen automatically.With the USB reverse protection,it can protect your computer from been hurted by the reverse USB. - Servos power supply DC depends on the motors, generally 5V DC - Control channels 16. can be controlled at the same time and the accuracy can be adjusted - Communication Input USB or UART TTL or USART. The Bluetooth or some other wireless module can be used to make the controlling - Signal Output PWM Accuracy 1us. - Servo motor resolution 1us, 0.09 degrees. - Baud Rate 9600,19200,28400,57600,115200,128000recognized automatically - Servo motors supported Futaba, Hitec or some other Servos Motor controlled by PWM. - Control mode USB and UART TTL to accept command. Comes with USB data wire and PC controlling software - Flash onboard 512K ROMIf every command is used

Features Highly integrated analog circuitry to demodulate and decode responses Supports ISO/IECA/MIFARE Typical operating distance in Reader/Writer mode for communication to a ISO/IECA / MIFARE is mm Supports MIFARE Classic encryption in Reader/Writer mode Supports ISO/IECA higher transfer speed communication up to 848kbit/s Control by Serial UART interface: Baud rate could be bps ~ bps, with default baud rate bps With the chip ISO, it supports MIFARE standard encryption algorithm Configuration data is preserved in EEPROM against power cut off Built-in 8K EEPROM, easy to access it by sending commands Easy to use, by sending simple commands users can control it to read or write cards In compact command, command is as short as one byte Excellent EMC performance Parameter Power Supply: 4.5V~5.5V, typically 5V. Interface: UART (5V TTL) and SPI (3.3V TTL) Size: 40mm x 50mm Usage Baud rate could be bps ~ bps" Box Pack - No Warranty

Features Highly integrated analog circuitry to demodulate and decode responses Supports ISO/IECA/MIFARE Typical operating distance in Reader/Writer mode for communication to a ISO/IECA / MIFARE is 40 to 50 mm Supports MIFARE Classic encryption in Reader/Writer mode Supports ISO/IECA higher transfer speed communication up to 848kbit/s Control by Serial UART interface: Baud rate could be bps -bps, with default baud rate bps With the chip ISO, it supports MIFARE standard encryption algorithm Configuration data is preserved in EEPROM against power cut off Built-in 8K EEPROM, easy to access it by sending commands Easy to use, by sending simple commands users can control it to read or write cards In compact command, command is as short as one byte Excellent EMC performance Parameter Power Supply: 4.5V-5.5V, typically 5V. Interface: UART 5V TTL and SPI 3.3V TTL Size: 40mm x 50mm Usage Baud rate could be bps ~ bps" Facebook page;ElectronicsArena.com Box Pack - No Warranty

Features Highly integrated analog circuitry to demodulate and decode responses Supports ISO/IECA/MIFARE Typical operating distance in Reader/Writer mode for communication to a ISO/IECA / MIFARE is 40 to 50 mm Supports MIFARE Classic encryption in Reader/Writer mode Supports ISO/IECA higher transfer speed communication up to 848kbit/s Control by Serial UART interface: Baud rate could be bps -bps, with default baud rate bps With the chip ISO, it supports MIFARE standard encryption algorithm Configuration data is preserved in EEPROM against power cut off Built-in 8K EEPROM, easy to access it by sending commands Easy to use, by sending simple commands users can control it to read or write cards In compact command, command is as short as one byte Excellent EMC performance Parameter Power Supply: 4.5V-5.5V, typically 5V. Interface: UART 5V TTL and SPI 3.3V TTL Size: 40mm x 50mm Usage Baud rate could be bps ~ bps" Facebook page;ElectronicsArena.com

Features Highly integrated analog circuitry to demodulate and decode responses Supports ISO/IECA/MIFARE Typical operating distance in Reader/Writer mode for communication to a ISO/IECA / MIFARE is 40 to 50 mm Supports MIFARE Classic encryption in Reader/Writer mode Supports ISO/IECA higher transfer speed communication up to 848kbit/s Control by Serial UART interface: Baud rate could be bps -bps, with default baud rate bps With the chip ISO, it supports MIFARE standard encryption algorithm Configuration data is preserved in EEPROM against power cut off Built-in 8K EEPROM, easy to access it by sending commands Easy to use, by sending simple commands users can control it to read or write cards In compact command, command is as short as one byte Excellent EMC performance Parameter Power Supply: 4.5V-5.5V, typically 5V. Interface: UART 5V TTL and SPI 3.3V TTL Size: 40mm x 50mm Usage Baud rate could be bps ~ bps" Box Pack - No Warranty

features highly integrated analog circuitry to demodulate and decode responses supports iso ieca mifare typical operating distance in reader writer mode for communication to a iso ieca mifare is mm supports mifare classic encryption in reader writer mode supports iso ieca higher transfer speed communication up to 848kbit s control by serial uart interface: baud rate could be bps bps, with default baud rate bps with the chip iso, it supports mifare standard encryption algorithm configuration data is preserved in eeprom against power cut off built in 8k eeprom, easy to access it by sending commands easy to use, by sending simple commands users can control it to read or write cards in compact command, command is as short as one byte excellent emc performance parameter power supply: 4.5v 5.5v, typically 5v. interface: uart 5v ttl and spi 3.3v ttl size: 40mm x 50mm usage baud rate could be bps bps

SUPERRO 610p programmer SUPERRO 610p programmer Features: Fastest Cheapest Programmer: With ARM7 MCU it gives ultra-fast programming experience. Programs devices with Vcc as low as 1.2V Built-in 48 universal pin drivers CE and ROHS Compliant Detailed Features: Supports IC devices from 169 manufacturers and continuing. Programs devices with Vcc as low as 1.2V. Ultra fast programming speed: Programs and verifies 64 Mb NOR FLASH memory in 11.3 seconds and 64Mb EEPROM in 43 seconds. Built with 48 universal pin-drivers for support of today’s most complex devices. Universal and device independent socket adapters are available for various packages. The programmer operates in either PC hosted mode. Under PC hosted mode, a PC controls the programmer via a high-speed USB2.0 connection to program a chip. ISP/ICP programming capability through optional ISP/ICP adapter. Only IC manufacturer approved programming algorithms provide high reliability. Vcc verification at (+5%~-5%) and (%) enhances programming reliability. Provides over-current and over-voltage protection for safety of the chip and programmer hardware. Compatible with Windows 7 & Vista & XP bit Includes the following advanced and powerful software functions: Chip operation starts immediately upon proper chip insertion in Production Mode. The Project function simplifies processes such as device selection, file loading, device configuration setting, program option, and batch file setting into one step. Password protection provides security for project files and production volume control. The Batch command combines device operations like program, verify, security into a single command at any sequence. Serial number generators are available as standard or customer-specific functions. A Log file provides quality tracking. SUPERRO 610p programmer Speed Comparison Device Program + Verify (Sec) Compare with SPU Type AT28C64B 0.8(P)+0.1(V)= 0.9(s) 1.2(P)+0.8(V)= 2.0(s) 64Kb EEPROM 24AA(P)+1.8(V)= 4.5(s) 5.0(P)+4.0(V)= 9.0(s) 128Kb EEPROM QB25F640S33B(P)+14.4(V)= 43.4(s) 55.2(P)+41.4(V)= 96.6(s) 64Mb EEPROM AT89C55WD 2.5(P)+0.4(V)= 2.9(s) 3.3(P)+1.0(V)= 4.3(s) 20KB FLASH MCU S25FL064A 43.9(P)+14.7(V)= 58.6(s) 72.8(P)+41.4(V)= (s) 64Mb SPI EEPROM PIC16F876A 10.1(P)+0.8(V)= 10.9(s) 22.1(P)+06.2(V)= 28.3(s) PIC18F(P)+1.1(V)= 6.2(s) 13.6(P)+06.7(V)=20.3(s) SUPERRO 610p programmer Device Updates XELTEK updates software and device algorithm regularly. View the latest Device List. Download the current software version free of charge at Download Center. Warranty Support Standard 2 Years Warranty: Included with purchase of SuperPro 500P. Covers device update and repair. Xeltek pays Fedex GND when shipping product back to customer for US only. It doesn't apply for international customers. Programmer is warranted to be free of manufacturing or workmanship defects for two years from the date of purchase. For technical support, you may use ticketing system, live chat or forum; you may also give us a call during our business hours Monday through Friday, from 8:00am to 4:30pm (PST). Hardware & Electrical Specifications Devices Supported: EPROM, Paged EPROM, Parallel and Serial EEPROM, FPGA Configuration PROM, FLASH memory (NOR), BPROM, NVRAM, SPLD, CPLD, EPLD, Firmware HUB, Microcontroller, MCU, Standard Logic Package: DIP, SDIP, PLCC, JLCC, SOIC, QFP, TQFP, PQFP, VQFP, TSOP, SOP, TSOPII, PSOP, TSSOP, SON, EBGA, FBGA, VFBGA, uBGA, CSP, SCSP,… PC interface: USB2.0 (High speed) Stand-alone memory: Compact FLASH Card Power supply: AC Adapter: Input AC 90V- 250V, Hz; DC Output: 12V/2A; power 15W Main unit: Dimensions 70mm (L) * 52mm (W) * 15mm (H) Weight 0.85 lbs (0.4Kg) Package: Dimensions 150mm (L) * 120mm (W) * 30mm (H) Weight 3 lbs (1.4Kg) Items Included SuperPro 610p Programmer with a DIP48 Adapter AC adapter Software CD Optional Accessories: Adapter in various packages USB 2.0 Interfaced, ultra-high speed economy universal device programmer

features highly integrated analog circuitry to demodulate and decode responses supports iso ieca mifare typical operating distance in reader writer mode for communication to a iso ieca mifare is mm supports mifare classic encryption in reader writer mode supports iso ieca higher transfer speed communication up to 848kbit s control by serial uart interface: baud rate could be bps bps, with default baud rate bps with the chip iso, it supports mifare standard encryption algorithm configuration data is preserved in eeprom against power cut off built in 8k eeprom, easy to access it by sending commands easy to use, by sending simple commands users can control it to read or write cards in compact command, command is as short as one byte excellent emc performance parameter power supply: 4.5v 5.5v, typically 5v. interface: uart 5v ttl and spi 3.3v ttl size: 40mm x 50mm usage baud rate could be bps bps" Box Pack - No Warranty

features highly integrated analog circuitry to demodulate and decode responses supports iso iec14443a mifare typical operating distance in reader writer mode for communication to a iso iec14443a mifare is 40 50 mm supports mifare classic encryption in reader writer mode supports iso iec14443a higher transfer speed communication up to 848kbit s control by serial uart interface baud rate could be 2400bps 115200bps, with default baud rate 9600bps with the chip iso14443, it supports mifare standard encryption algorithm configuration data is preserved in eeprom against power cut off built in 8k eeprom, easy to access it by sending commands easy to use, by sending simple commands users can control it to read or write cards in compact command, command is as short as one byte excellent emc performance parameter power supply 4.5v 5.5v, typically 5v. interface uart 5v ttl and spi 3.3v ttl size 40mm x 50mm usage baud rate could be 2400bps 115200bps

visit electronicspangadotcom Highly integrated analog circuitry to demodulate and decode responses Supports ISO/IECA/MIFAR-E Typical operating distance in Reader/Writer mode for communication to a ISO/IECA / MIFAR-E is mm Supports MIFAR-E Classic encryption in Reader/Writer mode Supports ISO/IECA higher transfer speed communication up to 848kbit/s Control by Serial UART interface: Baud rate could be bps ~ bps, with default baud rate bps With the chip ISO, it supports MIFAR-E standard encryption algorithm Configuration data is preserved in EEPROM against power cut off Built-in 8K EEPROM, easy to access it by sending commands Easy to use, by sending simple commands users can control it to read or write cards In compact command, command is as short as one byte Excellent EMC performance ROSH: Lead-free Code available for free on demand.

visit electronicspangadotcom Highly integrated analog circuitry to demodulate and decode responses Supports ISO/IEC14443A/MIFAR-E Typical operating distance in Reader/Writer mode for communication to a ISO/IEC14443A / MIFAR-E is 40~50 mm Supports MIFAR-E Classic encryption in Reader/Writer mode Supports ISO/IEC14443A higher transfer speed communication up to 848kbit/s Control by Serial UART interface: Baud rate could be 2400bps ~ 115200bps, with default baud rate 9600bps With the chip ISO14443, it supports MIFAR-E standard encryption algorithm Configuration data is preserved in EEPROM against power cut off Built-in 8K EEPROM, easy to access it by sending commands Easy to use, by sending simple commands users can control it to read or write cards In compact command, command is as short as one byte Excellent EMC performance ROSH: Lead-free Code available for free on demand.

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 48T Audio DSP Mixer with express shipping all over Pakistan.     The CONVERGE Pro 2 48T Audio DSP Mixer from ClearOne is a complete conferencing solution with 4 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection.   The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.     Features: Architecture • 4 mic/line inputs with AEC •  Built-in Telco with ClearEffect processing •  Built-in USB for PC-based conferencing Scalable Connectivity •  Standalone and daisy-chained system •  Stack up units up to 96 mic/line inputs •  Expansion bus C-Link with 64 channels •  P-Link bus to connect 6 peripherals Configuration & Management •  CONSOLE software •  Auto-discovery of devices •  Matrix View for entire system •  FlowView for visualized audio signal paths •  System monitoring and troubleshooting Audio Signal Processing •  Acoustic Echo Cancellation processing •  Distributed Echo Cancellation on every mic input •  Noise cancellation with Adaptive-Ambience •  Acoustic Intelligence with faster convergence •  DARE feedback elimination •  Microphone gating Flexible Control Options •  Dialer app for Windows, Mac, iOS, and Android •  Tabletop controller with a touch panel •  Wall controller with buttons •  Web-based controller •  Supports 3rd-party control modules     Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Amplifier Output Speaker Output Port: Dual binding posts Audio: 2 x Channel Output Power: Maximum 10 W, 8 Ohms load Frequency Response: 20 Hz to 22 kHz @ +10 dBu, +/- 0.5 dBu THD + N: 20 Hz to 22 kHz @ +10 dBu, 1 W, Dynamic Range: 20 Hz to 22 kHz @ 20 dB, >102dB, with 20 kHz digital low pass filter Crosstalk: Channel to Channel, stimulus at 20 dBu, 10 W output to receptor 8⿦ load, 20 Hz to 22 kHz, Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Specifications   1000Base-T PoE Interface 24 Combo 1000Base-T/SFP 4 Auto MDI/MDIX Yes 10/100/1000BASE-T PoE ports 24 Combo 10/100/1000BASE-T/SFP ports 4 Switch Capacity 56 Gbps Max. Packet Forwarding Rate 41.7 Mpps Store & Forwarding Forwading Yes Dimension 440mm x 250 mm x 44mm Weight 3.94 kg Operation Temperature -5 - 50°C Storage Temperature -20-70°C Operation Humidity 0% - 95% RH Storage Humidity 0% ~ 95% RH Operating Altitude 1500 meters Maximum Power Consumption PoE on 446.1 W/100 V 424.8 W/240 V PoE off 29.8 W/100 V 29.0 W/240 V Standby Power Consumption 18.5 W/100V / 17.1 W/240V Maximum Heat Dissipation 1521.99 BTU/hr (100 V) 1449.49 BTU/hr (240 V) MTBF 277,967 hours Power Input 100-240 VAC CPU Speed 500MHz Flash Memory Size 32MB Packet Buffer Size 4.1MBits DRAM Size DDR3 128MB FAN Yes Comply with RoHS 6 Yes Energy Efficiency Ethernet (EEE) Yes Power Saving By Link Status Yes Power Saving By Cable Length Yes Power Saving By Port Shut-Off Yes Power Saving By System Hibernation Yes Time-based PoE Yes Maximum PoE Budget 370W PoE Budget 370 W 802.3x Flow Control Yes Head-of-line (HOL) Blocking Prevention Yes MAC Address Table Size 8K 802.1D Spanning Tree (STP) Yes 802.1w Rapid Spanning Tree (RSTP) Yes 802.1s Multiple Spanning Tree (MSTP) Yes Root Restriction Yes 802.3ad Link Aggregation Yes Link Aggregation Group Per Device 4 Max Port Per Link Aggregation Group 8 Port Mirroring Yes Jumbo Frame 10,000 Bytes Loopback Detection (LBD) Yes IGMP Snooping Yes Max IGMP Snooping Groups 256 IGMP Snooping Fast Leave Yes MLD Snooping Yes MLD Snooping Groups Yes MLD Snooping Fast Leave Yes 802.1Q VLAN Yes VLAN Groups Yes Port-based VLAN Yes Voice VLAN Yes Auto Surveillance VLAN Yes Asymmetric VLAN Yes ARP Yes IP Interface Yes Max Number of IP Interface 4 ARP Entries Yes IPv6 Neighbor Discovery (ND) Yes ND Entries 128 Default Route Yes Static Route Yes Number of Queue Yes Class of Service (CoS) Yes Strict Priority Queue (SPQ) Yes Weighted Round Robin (WRR) Yes Port-based Bandwidth Control Yes Max Access Control List (ACL) Entries Yes MAC Access List Yes IP Access List Yes IPv6 Access List Yes SSH Yes SSL Yes (only support TLS 1.0) Port Security Yes Broadcast/Multicast/Unicast Storm Control Yes Traffic Segmentation Yes Smart IP-MAC-Port Binding (Smart IMPB) Yes D-Link Safeguard Engine Yes DHCP Server Screening Yes ARP Spoofing Prevention Yes DoS Attack Prevention Yes 802.1X Yes Port based 802.1X Authentication Yes Authentication for Management Access Yes RADIUS Yes Trusted Host Yes Cable Diagnostics Yes Simple Network Time Protocol (SNTP) Yes Web-based GUI Yes SNMP Yes SNMP Trap Yes Telnet Server Yes RMONv1 Yes TFTP Client Yes System Log Yes D-Link Discover Protocol (DDP) Yes (v0.26) LLDP-MED Yes LLDP Yes DHCP relay Yes DHCP/BootP Client Yes Dual Images Yes D-Link Network Assistant Yes (Chrome edition) Ping Yes Debug Command Yes Dual Configurations Yes Smart Wizard Yes

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128V Audio DSP Mixer with express shipping all over Pakistan.   The CONVERGE Pro 2 128V Audio DSP Mixer from ClearOne is a complete conferencing solution with 12 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in VoIP interface for 2 lines. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer comes with built-in VoIP for VoIP conferencing. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.   Features: Architecture • 12 mic/line inputs with AEC •  Built-in VoIP for 2 lines •  Built-in USB for PC-based conferencing Scalable Connectivity •  Standalone and daisy-chained system •  Stack up units up to 96 mic/line inputs •  Expansion bus C-Link with 64 channels •  P-Link bus to connect 6 peripherals Configuration & Management •  CONSOLE software •  Auto-discovery of devices •  Matrix View for entire system •  FlowView for visualized audio signal paths •  System monitoring and troubleshooting Audio Signal Processing •  Acoustic Echo Cancellation processing •  Distributed Echo Cancellation on every mic input •  Noise cancellation with Adaptive-Ambience •  Acoustic Intelligence with faster convergence •  DARE feedback elimination •  Microphone gating Flexible Control Options •  Dialer app for Windows, Mac, iOS, and Android •  Tabletop controller with a touch panel •  Wall controller with buttons •  Web-based controller Supports 3rd-party control modules   Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) VoIP Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation Audio: 5 lines (2 default + 3 lines through license), each line supporting 1+5 calls Sample Rate: 24 kHz Sample Bit Depth: 24-bit Codec: G.711 uLaw, G.711 ALaw, G.722 Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: Proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128T Audio DSP Mixer with express shipping all over Pakistan.   The CONVERGE Pro 2 128T Audio DSP Mixer from ClearOne is a complete conferencing solution with 12 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.   Features: Architecture 12 mic/line inputs with AEC Built-in Telco with ClearEffect processing Built-in USB for PC-based conferencing Scalable Connectivity Standalone and daisy-chained system Stack up units up to 96 mic/line inputs Expansion bus C-Link with 64 channels P-Link bus to connect 6 peripherals Configuration & Management CONSOLE software Auto-discovery of devices Matrix View for entire system FlowView for visualized audio signal paths System monitoring and troubleshooting Audio Signal Processing Acoustic Echo Cancellation processing Distributed Echo Cancellation on every mic input Noise cancellation with Adaptive-Ambience Acoustic Intelligence with faster convergence DARE feedback elimination Microphone gating Flexible Control Options Dialer app for Windows, Mac, iOS, and Android Tabletop controller with a touch panel Wall controller with buttons Web-based controller Supports 3rd-party control modules   Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: Proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

The Corsair Gaming Series GS700 power supply is the ideal price-performance solution for building or upgrading a Gaming PC. A single +12V rail provides up to 56A of reliable, continuous power for multi-core gaming PCs with multiple graphics cards. The ultra-quiet, dual ball-bearing fan automatically adjusts its speed according to temperature, so it will never intrude on your music and games.     CHOOSE YOUR COLOR Tri-color LEDs illuminate the transparent fan blades at your command. Choose red, white or blue for the appropriate dramatic effect, or turn them off entirely at the press of a button. CORSAIR GAMING SERIES GS700 FEATURES: It supports the latest ATX12V v2.3 standard and is backward compatible with ATX12V 2.2 and ATX12V 2.01 systems An ultra-quiet 140mm double ball-bearing fan delivers excellent airflow at an exceptionally low noise level by varying fan speed in response to temperature 80Plus certified  to deliver 80% efficiency or higher at normal load conditions (20% to 100% load) 0.99 Active Power Factor Correction provides clean and reliable power Universal AC input from 90~264V — no more hassle of flipping that tiny red switch to select the voltage input! Extra long fully-sleeved cables support full tower chassis A three year warranty and lifetime access to Corsair’s legendary technical support and customer service Over Current/Voltage/Power Protection, Under Voltage Protection and Short Circuit Protection provide complete component safety Dimensions: 150mm(W) x 86mm(H) x 160mm(L) MTBF: 100,000 hours Safety Approvals: UL, CUL, CE, CB, FCC Class B, TÜV, CCC, C-tick   Looking for any other Brand Power Supply/PSU  Click Here. If you're Looking for an awesome Chassis  Click Here  or for a Memory Module  Click Here. Explore awesome GPUs, Chassis, SSDs, and much more  Click Here.

TP-Link T1600G-28PS (TL-SG2424P) JetStream 24-Port Gigabit Smart PoE+ Switch with 4 SFP Slots Specs TP-Link’s brand new JetStream T1600G-28PS provides huge upgrade comparing with previous versions. New Web UI design features better operating experience. The switch provides 24 10/100/1000Mbps RJ45 Ports which support 802.3at/af-compliant PoE, with a total PoE power supply up to 192W, powerful and ­flexible enough for users to deploy wireless access points or IP-based network surveillance cameras. Small and medium sized businesses can get cost-effective networking solutions without sacrificing enhanced usability and strong performance because of the integrated L2 and L2+ features such as 802.1Q VLAN, QoS, IGMP Snooping and Static Routing.     IEEE 802.3at/af-compliant Power over Ethernet The T1600G-28PS provides 24 10/100/1000Mbps RJ45 Ports that support 802.3at/af-compliant PoE, with a total PoE power supply up to 192W to power any 802.3at/af compliant power device. Compact and fl­exible, the T1600G-28PS is ideal to ­flexibly use PoE to deploy wireless access points or IP-based network surveillance cameras for projects or small business networks.   Abundant L2 and L2+ features T1600G-28PS supports a complete lineup of L2 features, including IGMP Snooping/ MLD Snooping, 802.1Q/MAC/ Protocol VLAN, STP/RSTP/MSTP, Link Aggregation Group(LAG), Port Isolation, Port Mirroring, and 802.3x Flow control function. IGMP Snooping ensures the multicast stream be forwarded intelligently to the appropriate subscribers by the switch, while IGMP Throttling & Filtering restricts each subscriber on a certain level to prevent unauthorized multicast access. Besides, T1600G-28PS also supports L2+ features like static routing. It is a simple way to provide segmentation of the network with internal routing through the switch and helps network traffic to be more efficient.   Advanced QoS Features To integrate voice, data and video service on one network, the switch applies abundant QoS policies. Administrator can designate the priority of the traffic based on a variety of functions including Port Priority, 802.1P Priority and DSCP Priority, which can ensure that voice and video are always clear, smooth and jitter free. In conjunction with the Voice VLAN that the switch supports, Voice Applications will perform better and smoother.   IPv6 Support T1600G-28PS supports comprehensive IPv6 features including IPv6 management, ACL, QoS and MLD Snooping, all of these features help to ensure a smooth migration to IPv6-based network without changing switches in the future.   Enterprise Level Management Features T1600G-28PS supports multiple user-friendly standard management features such as intuitive web-based Graphical User Interface (GUI), industrially standard Command Line Interface (CLI) and SNMP (v1/2/3). It supports RMON (Remote Network Monitoring), which enables the administrator to obtain valuable status information and also enables the switch to send traps when encountering abnormal events. Also, the switch supports Dual Image function, which makes there be less ‘down-time’ when switches are being upgraded/downgraded.

Ubiquiti USG-PRO-4 Enterprise Gateway Router, Product Highlights Dual-Core 1 GHz Processor 2 GB On-Board Flash Memory Rackmountable Design 1 x RJ-45 Serial Console Port 2 x Gigabit WAN Ports 2 x Gigabit LAN Ports 2 x SFP Fiber Port Ubiquiti Networks USG-PRO-4 Overview   With four Gigabit Ethernet ports and two SFP combination ports, the USG-PRO-4 Enterprise Gateway Router with 2 Combination SFP/RJ-45 Ports from Ubiquiti Networks is designed to be the backbone of a network. This gateway is designed to support multiple network switches which in turn can support a variety of networked devices such as access points, management stations, VoIP devices, and much more. The integrated SFP combination ports make it simple to connect fiber channel devices such as SAN servers and other local area networked devices. On the back of this rackmountable gateway you will find a single RJ-45 serial console port for command line interface management, two LAN ports, two WAN ports, and two SFP combination ports offering a diverse set of connection options.   Ubiquiti Networks USG-PRO-4 Specs Processor Dual-Core 1 GHz, MIPS64 with hardware acceleration for packet processing System Memory 2 GB DDR3 RAM On-Board Flash Storage 4 GB Max Power Consumption 40 W Power Method 110-240 VAC Power Supply Internal AC/DC power adapter 60 W (24 V, 2.5 A) Certifications CE, FCC, IC Rackmountable Yes ESD/EMP Protection Air: ± 24 kV Contact: ± 24 kV Temperature & Humidity Operating Temperature: 14 to 113°F / -10 to 45°C Operating Humidity: 10 to 90% non-condensing Buttons Reset LEDs System: Status Data Ports: Speed/Link/Activity Layer 3 Routing Forwarding Performance Packet Size: 64 Bytes; 1,000,000 pps Packet Size: 512 Bytes or larger; 1 Gbps per port line rate Networking Interface Console Port 1 x RJ-45 serial port Data Ports 2 x Gigabit Ethernet ports 2 x Gigabit Ethernet/SFP combination ports System Requirements • Linux, Mac OS X, or Microsoft Windows 7/8/10 • Java Runtime Environment 1.6 (or above) • Web Browser: Mozilla Firefox, Google Chrome, or Microsoft Internet Explorer 10 (or above) • UniFi Controller software v4.8 or higher Dimensions & Weight Dimensions 19.06 x 1.73 x 6.46" / 484 x 44 x 164 mm Weight 5.07 lb / 2.30 kg Packaging Info Package Weight 6.6 lb Box Dimensions (LxWxH) 23.2 x 8.6 x 3.8"

Up for sale is a brand new 6.5 kva generator, which produces up to 27 amps and runs on 15 Horse Power and even has digital meters (centralized command) It is made by Lancer which is a great generator and even has the gas kit included This generator can easily power 1 - 1.5 ton AC, a fridge, freezer, and many lights and fans around the house. It is a petrol generator with a gas kit (pre-installed). It uses about 1 liter of Petrol an hour and has a capacity of 25 Liters of fuel. I bought the generator and have not used it at all and now I'm moving so won't need it. Any questions, please call/text serious buyers only

Up for sale is a brand new 6.5 kva generator, which produces up to 27 amps and runs on 15 Horse Power and even has digital meters (centralized command) It is made by Lancer which is a great generator and even has the gas kit included This generator can easily power 1 - 1.5 ton AC, a fridge, freezer, and many lights and fans around the house. It is a petrol generator with a gas kit (pre-installed). It uses about 1 liter of Petrol an hour and has a capacity of 25 Liters of fuel. I bought the generator and have not used it at all and now I'm moving so won't need it. Any questions, please call/text serious buyers only Box Open - Never Used- Warranty: 1 Year

FG-AGS GSM Monitoring and Control System for Generators allows authorized users the ability to control any generator (GAS/Petrol/ Diesel and Dual fuel) units while off site from any location in the world via its text message/SMS alert and command relay capability thus eliminating the need to be constantly on site. This capability to initiate commands via a mobile device makes it cost effective as no other sophisticated controller devices are required to be carried around by authorized users while going about their other daily business. Any deviation from pre-set/normal operation mode alerts authorized users of the occurrence. Once an alert is received, the authorized user is able to initiate corrective measures via a mobile device. Parameter for control and monitoring: 1- Generator Start / Stop Via SMS (Fully automatic sequence) 2- Choke On/Off via SMS 3- Generator Temperature Monitoring and High Temperature Alert via SMS 4- Mains Power /Commercial Power failure Alert via SMS 5- Generator Change over Alert 6- Wide Temperature range: -20C to 70C (Suitable for indoor and outdoor use) 7- Built-in Battery backup for 24Hours 8- Easy to Install. 1 Year Warranty and After sales service. Box Pack- Warranty: 1 Year