Pop filter

Pop Filter Studio Microphone Wind Screen Economical solution to help get your best vocal recordings Wind Screen Convenient and easy use. Swivel mount for easy installation Protects your microphone from surplus spit caused by over eager performers 360 degree flexible gooseneck holder, convenient for use Views: 2

Double layered pop filter for studio mic for behringer akg samson shure. You can Whatsapp me

6/" Double-Layered Nylon Pop Screen Protects Against Vocal Plosives 13/" Flexible Gooseneck Protects Mic from Corrosive Moisture Sturdy C-Clamp with Thumbscrew Fastener Grommet & Padding Protect Stand Finish

pop filter for studio mic adjustable for all studio mic behringer akg samson shure all studio mic You can Whatsapp me

ENRG Microphone Pop Filter Shield Dual Layers Wind Proof Screen with Flexible 360° Gooseneck Clip Stabilizing Arm for Recording Broadcasting Streaming - Black Easy Mount & Demount: Hassle-free swivel mount for easy installation. This easy-to-use pop filter allows you to mount or demount it in seconds. Two-screen Pop Filters: The first screen blocks air blasts as any pop filter normally would; The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained. Adjustable Gooseneck: The metal gooseneck holder fully supports the filter's weight and keep it in place. You can adjust the angle and distance between the screen and the microphone. Universal Compability: Adjustable screw rotating clamp with scratch-proof gripper can secure to majority of tubular mounting booms or mic stands (Maximum diameter: 1.6inches).

Microphone Pop Filter Shield Dual Layers Wind Proof Screen with Flexible 360° Gooseneck Clip Stabilizing Arm for Recording Broadcasting Streaming Easy Mount & Demount: Hassle-free swivel mount for easy installation. This easy-to-use pop filter allows you to mount or demount it in seconds. Two-screen Pop Filters: The first screen blocks air blasts as any pop filter normally would; The gap in between then disperses any remaining air pressure, so by the time it passes the second screen, the blast is easily contained. Adjustable Gooseneck: The metal gooseneck holder fully supports the filter's weight and keep it in place. You can adjust the angle and distance between the screen and the microphone. Universal Compability: Adjustable screw rotating clamp with scratch-proof gripper can secure to majority of tubular mounting booms or mic stands (Maximum diameter: 1.6inches).

Microphone Pop Filter for Recording Broadcasting Streaming Easy Mount & Demount: Hassle-free swivel mount for easy installation. This easy-to-use pop filter allows you to mount or demount it in seconds. Universal Compability: This ball type microphone filter is compatible with most condenser mic

Designed to help reduce vocal plosives and popping when recording in the studio, the Microphone Pop Filter with Boom and Stand Clamp from Nady features a pop filter on an adjustable boom arm with an integrated stand clamp, for attaching right to your microphone stand. Packaging Info Package Weight 0.95 lb Box Dimensions (LxWxH) 15.4 x 7.7 x 1.2"

Home / Pop Filters / DragonPad USA Pop Filter Studio Wind Screen with 360 Mount (Black) ORIGINAL citi computers address shop no f-80 regal trade squre regal chowk saddar karachi pakistan Views: 70

Highly sensitive condenser microphone, can distinct delicate differences of voice and sound High output with low noise, offers perfect recording for you Pop filter and foam cap can filter hissing and lisping sounds to improve the quality of recording Anti-shock mount, clip holder mount, arm stand, these can provide stable and adjustable support for microphone

Brand Name:J audioModel Number:AGT-T02Type:For Voice FilterProduct name:Wholesale Microphone Pop Filter Holder Desktop Tripod StandMaterial:Plastic FlexibleColor:BlackUse:Online Chat, Singing Keyword:Mic Stand KiltApplication:Name:stand microphone,desktop microphone stand,Mic stand

Exclusive appearance patent, simple and stylish High quality ABS material, tough and durable Perfect combination of shockproof tripod and blowout preventer, recording more real and clear The gooseneck flexible hose adopts carbon steel material, can withstand more than 1W bending test, and can be adjusted at any angle Anti-nozzle cover adopts double layer mesh design, double noise reduction Microphone stand adjustable 180 degrees Detachable, foldable, easy to carry and carry Position of silicone ring can be adjusted according to microphone handle specifications

Dual Layers Wind Proof Screen 360° Flexible Gooseneck Clip Stabilizing Arm

It has Swivel mount for easy installation. Adjustable clamp fixes securely to any mic stand. Goose neck for precise positioning. This is a nice quality mini pop shield, suitable for all types of recording microphones as used in recording studios. Protects your microphone from surplus spit caused by over eager performers and work as wind filter Brand Lishion Product type Other Accessories Price ₨ 1099

It has Swivel mount for easy installation. Adjustable clamp fixes securely to any mic stand. Goose neck for precise positioning. This is a nice quality mini pop shield, suitable for all types of recording microphones as used in recording studios. Protects your microphone from surplus spit caused by over eager performers and work as wind filter Views: 5

Features: For Computer Professional Condenser Audio 3.5mm Wired BM 800 Studio Microphone Vocal Recording Mic KTV Karaoke+Microphone stand/студия микрофон Ideal for radio broadcasting studio, voice-over sound studio, stages, TV stations, etc. Scissor arm Desktop Microphone Stand & Mic Boom Pop Filter & shock-proof mount Stable, Durable & Affordable Desktop type Microphone Stand; Double-braced arms add strength to stand much more weight; Foldable arms - minimize transport size and easy to storage; Scissor arms - completely flexible adjust the desired angle and height Adjustable clamp to mount on the desktop easily, fixes securely to any mic stand for easy to install and convenient to use. Dual suspension springs on each boom arm for extra stability. Double audio port - Connect the microphone input and earphone/speaker output at the same time. Specifications: Output Impedance: 150Ohm+ / -30% Microphone Output Interface: 3.5mm Signal Noise: 78dB XLR Cable Length: 2.5m Frequency Response: 20Hz-16kHz Load Impedance: Greater than equal 1000Ohm Electrical Current: 3mA Desk Clamp Max. Mount Thicknessl: 45mm Sensitivity: -38dB+ / -2dB Equivalent Noise: 16dBA Microphone Output Interface: 3.5mm Max. Length of Pop Filter's Gooseneck: 370mm

100% brand new and high quality. Convenient and easy use. Protects your microphone from surplus spit caused by over eager performers. 360° Flexible gooseneck holder, convenient for use. Swivel mount for easy installation. Adjustable clamp fixes securely to any Mic stand. Goose neck for precise positioning. It can also protect the microphone from the accumulation of saliva. Commonly used in a recording studio. Specification: Material: Metal & plastic Color: Black Screen Diameter: 15.5cm Neck Length: 36cm Net weight: 235g Package Included: 1 * Studio Microphone Mic Windscreen Pop Filter Mask Shield Views: 75

Double Layer Studio Microphone Mic Wind Screen Pop Filter/ Swivel Mount / Mask Shied For Speaking Recording EN410 Views: 7

Create unparalleled recordings and send them directly to your computer with Blue Microphone's Yeti USB Microphone. The Yeti uses Blue Microphone's proprietary tri-capsule technology to produce pristine, studio-quality recordings. It features four different pattern settings so you can record vocals, instrumental music, podcasts, or interviews in ways that would normally require multiple microphones. With simple controls for headphone volume, pattern selection, instant mute, and microphone gain, you'll be creating exceptional recordings right out of the box.. + Pop Shield filter for free with the mircophone. Views: 213

Type Studio Microphone Product Description The sE X1 is one of our most popular microphones and whether you’re recording vocals, percussion, guitar or any other instrument, the sE X1 is the perfect choice. It features a hand built capsule with a 10dB pad and low cut bass filter and is finished in noise damping black paint. The sE X1 is ideal for both male and female vocals. The sE X1 Vocal Pack consists of everything you need to start recording straight away in your project and home studio. The unique shockmount mounting system makes for quick and easy setup. The sE X1 Vocal Pack includes the recording essentials; sE X1 condenser microphone, a shock mount, sE Metal Pop Filter and a 3m high-quality microphone cable. The sE Metal Pop Filter is crucial for recording vocals and has been created with the metal screen louvered at a slight angle. This redirects any ultra-low frequency blasts leaving the vocal performance unaffected and without any low frequency ‘pop’s. Being made of metal as opposed to the traditional fabric shield makes the sE Pop Filter much more durable. What the professionals say: we chose the sE X1 over the NT1a for the vast majority of the recordings, because the recordings sounded 'righter' when put into the middle of tracks - we could do more with them in mixing and the end result was better Technical Specs for the sE X1 Condenser microphone: Frequency Response: 20Hz-20KHz Sensitivity: -32 dBV/Pa (25.1mV/Pa) Polar Pattern: Cardioid Impedance: ≤ 200 Ohms Equivalent Noise Level: 16dB(A weighted) Max SPL for 0.5% THD@Hz: 125dB Power Requirement: Phantom power 48V±4V Connector: 3-pin The sE X1 Vocal Pack includes: sE X1 Condenser microphone sE Metal Pop Filter sE Shock Mount sE XLR-XLR 3m Microphone Cable

The sE X1 is one of our most popular microphones and whether you’re recording vocals, percussion, guitar or any other instrument, the sE X1 is the perfect choice. It features a hand built capsule with a 10dB pad and low cut bass filter and is finished in noise damping black paint. The sE X1 is ideal for both male and female vocals. The sE X1 Vocal Pack consists of everything you need to start recording straight away in your project and home studio. The unique shockmount mounting system makes for quick and easy setup. The sE X1 Vocal Pack includes the recording essentials; sE X1 condenser microphone, a shock mount, sE Metal Pop Filter and a 3m high-quality microphone cable. The sE Metal Pop Filter is crucial for recording vocals and has been created with the metal screen louvered at a slight angle. This redirects any ultra-low frequency blasts leaving the vocal performance unaffected and without any low frequency ‘pop’s. Being made of metal as opposed to the traditional fabric shield makes the sE Pop Filter much more durable. What the professionals say: we chose the sE X1 over the NT1a for the vast majority of the recordings, because the recordings sounded 'righter' when put into the middle of tracks - we could do more with them in mixing and the end result was better. - Producer Simon Franglen (Avatar, Madonna, Titanic) Technical Specs for the sE X1 Condenser microphone: Frequency Response: 20Hz-20KHz Sensitivity: -32 dBV/Pa (25.1mV/Pa) Polar Pattern: Cardioid Impedance: ≤ 200 Ohms Equivalent Noise Level: 16dB(A weighted) Max SPL for 0.5% THD Hz: 125dB Power Requirement: Phantom power 48V±4V Connector: 3-pin The sE X1 Vocal Pack includes: sE X1 Condenser microphone sE Metal Pop Filter sE Shock Mount sE XLR-XLR 3m Microphone Cable

The sE X1 is one of our most popular microphones and whether you’re recording vocals, percussion, guitar or any other instrument, the sE X1 is the perfect choice. It features a hand built capsule with a 10dB pad and low cut bass filter and is finished in noise damping black paint. The sE X1 is ideal for both male and female vocals. The sE X1 Vocal Pack consists of everything you need to start recording straight away in your project and home studio. The unique shockmount mounting system makes for quick and easy setup. The sE X1 Vocal Pack includes the recording essentials; sE X1 condenser microphone, a shock mount, sE Metal Pop Filter and a 3m high-quality microphone cable. The sE Metal Pop Filter is crucial for recording vocals and has been created with the metal screen louvered at a slight angle. This redirects any ultra-low frequency blasts leaving the vocal performance unaffected and without any low frequency ‘pop’s. Being made of metal as opposed to the traditional fabric shield makes the sE Pop Filter much more durable. What the professionals say: we chose the sE X1 over the NT1a for the vast majority of the recordings, because the recordings sounded 'righter' when put into the middle of tracks - we could do more with them in mixing and the end result was better. - Producer Simon Franglen (Avatar, Madonna, Titanic) Technical Specs for the sE X1 Condenser microphone: Frequency Response: 20Hz-20KHz Sensitivity: -32 dBV/Pa (25.1mV/Pa) Polar Pattern: Cardioid Impedance: ? 200 Ohms Equivalent Noise Level: 16dB(A weighted) Max SPL for 0.5% THD 1000Hz: 125dB Power Requirement: Phantom power 48V±4V Connector: 3-pin The sE X1 Vocal Pack includes: sE X1 Condenser microphone sE Metal Pop Filter sE Shock Mount sE XLR-XLR 3m Microphone Cable

Type Studio Microphone Product Description A multi-pattern dual 1" condenser microphone. The NT2-A carries on the tradition forged by the now legendary RØDE NT2 with a professional large capsule (1") studio microphone incorporating three-position pick-up patterns, PAD and high-pass filter switches conveniently located on the mic body. At the heart of the NT2-A is the Australian-designed and manufactured HF1 dual diaphragm capsule. The frequency and transient response of this transducer has been voiced to complement today's modern recording techniques, and yet still evoke the silky smooth character of the legendary microphones of the 50s and 60s. These features provide the flexibility and superlative audio characteristics that make the NT2-A one of the most versatile condenser mics available. This Bundle version also includes the SM6 shockmount with detachable pop filter - a high-quality suspension shockmount. It provides isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. It also includes a removable pop shield with two axis of adjustment and a telescopic arm for ultimate application versatility, 6m of XLR cable, and a dust cover. Features Large 1” gold sputtered capsule On-body control of polar pattern, HPF and PAD Three-position variable polar pattern - Omni, Cardioid or Figure 8 Three-position variable High-Pass Filter - Flat, 40Hz or 80Hz Three-position PAD - 0dB, -5dB or -10dB Ultra low noise, transformerless surface mount circuitry Wide, dynamic range Internal capsule shockmounting Made in Australia Full 1-year warranty Includes SM6 shockmount with detachable pop filter, 6m of XLR cable, and a dust cover NT2-A Studio Condenser Microphone Bundle Specifications: NT2-A Condenser Microphone Acoustic Principle: Pressure Gradient Active Electronics: JFET impedance converter with bipolar output buffer Capsule: 1.00" Polar Pattern: cardioid, Omni, figure 8 Address Type: Side Frequency Range: 20Hz - 20kHz Output Impedance: 200Ω Maximum SPL147dB SPL (@ 1kHz, 1% THD into 1KΩ load) Maximum Output Level: 16.0dBu (@ 1kHz, 1% THD into 1KΩ load) Sensitivity-36.0dB re 1 Volt/Pascal (mV @ 94dB SPL) +/- 2 dB @ 1kHz Power Options: +48V phantom power required from mixer or interface; +24V phantom power required from mixer or interface Weight: gm Dimensions: mmH x mm W x mm D Output: XLR SM6 Weight: gm Dimensions (HxWxD): 210mm x 133mm x 210mm

Type Microphone Sound Superior. Samson's MTR101A Studio Mic Kit brings exceptional performance and high-end quality to a variety of live and studio situations. Ideal for recording vocals, close miking instruments, use as a room microphone and more, the MTR101A (MTR101 Condenser Microphone, pop filter and shockmount included) solidifies, Samson's commitment to offering superior sound and the ability to capture the best audio possible. Fully Featured Design The MTR101 is a large, 1" diaphragm studio condenser microphone. It features a cardioid pickup pattern that provides increased isolation of a sound source and is designed to handle high SPLs of up to 137dB. The MTR101 offers a smooth, extended frequency response, as well as low self-noise and a wide dynamic range perfect for recording. In addition, its rugged die cast construction features an internally shock-mounted capsule that reduces handling noise and external vibrations. Includes MTR101 Condenser Microphone, pop filter and shockmount Large, 1" diaphragm studio condenser microphone Cardioid pickup pattern for increased isolation Smooth, extended frequency response of 20Hz-20kHz Low self-noise, wide dynamic range perfect for recording Handles high SPLs of up to 137dB Internally shock-mounted capsule reduces handling noise and external vibrations Rugged die cast construction

A Versatile, Studio-quality USB Microphone Boasting studio-quality sound in an all-in-one package, the Rode NT-USB USB condenser microphone lets you start recording straight out of the box. Whether you're recording vocals, musical instruments, a voiceover, or your latest podcast, the NT-USB's USB connectivity and onboard A/D conversion ensure that you'll get the job done quickly and easily. You also get everything you need to set up and record, including a tripod base, mic stand mount, pop filter, USB cable, and a padded carrying case. Compatible with Mac OS X, Windows 8, and iOS, the Rode NT-USB USB condenser microphone is your complete recording solution. Rode NT-USB USB Condenser Microphone at a Glance: All-in-one package lets you start recording straight out of the box Stereo headphone jack for zero-latency monitoring Cross-platform compatibility makes for a versatile recording solution All-in-one package lets you start recording straight out of the box The Rode NT-USB USB condenser microphone includes a premium pop filter that fits onto the base of the mic, ensuring perfect positioning for pro-quality reduction of those nasty-sounding plosives. You also get a high-quality stand mount, desktop tripod stand, and a storage pouch - everything you need to start recording. Stereo headphone jack for zero-latency monitoring If you want to monitor in real time while recording, the Rode NT-USB USB condenser microphone features a zero-latency stereo headphone jack. You also get dials that allow you to adjust the monitoring level and mix between your recorded audio and microphone input. Latency is a performance-killer. Luckily, the NT-USB takes this into account, ensuring that what you hear and what you play are in perfect sync. Cross-platform compatibility makes for a versatile recording solution No matter what platform or software you record with, the Rode NT-USB USB condenser microphone is ready to go to work. Fully compatible with all mainstream recording apps on both Macs and PCs, this USB microphone also works with an iPad running GarageBand, Rode Rec, or any other app that accepts an external microphone. Rode NT-USB USB Condenser Microphone Features: All-in-one package lets you start recording straight out of the box USB connectivity and onboard A/D conversion ensure simple, fast results Stereo headphone jack for zero-latency monitoring Dials to adjust the monitoring level and mix between recorded audio and microphone input Mac OS X, Windows 8, and iOS compatibility makes for a versatile recording solution

Sound Superior. Includes MTR101 Condenser Microphone, pop filter and shockmount Samson's MTR101A Studio Mic Kit brings exceptional performance and high-end quality to a variety of live and studio situations. Ideal for recording vocals, close miking instruments, use as a room microphone and more, the MTR101A (MTR101 Condenser Microphone, pop filter and shockmount included) solidifies, Samson's commitment to offering superior sound and the ability to capture the best audio possible. Fully Featured Design The MTR101 is a large, 1" diaphragm studio condenser microphone. It features a cardioid pickup pattern that provides increased isolation of a sound source and is designed to handle high SPLs of up to 137dB. The MTR101 offers a smooth, extended frequency response, as well as low self-noise and a wide dynamic range perfect for recording. In addition, its rugged die cast construction features an internally shock-mounted capsule that reduces handling noise and external vibrations. Large, 1" diaphragm studio condenser microphone Cardioid pickup pattern for increased isolation Smooth, extended frequency response of 20Hz-20kHz Low self-noise, wide dynamic range perfect for recording Handles high SPLs of up to 137dB Internally shock-mounted capsule reduces handling noise and external vibrations Rugged die cast construction

The X1 Vocal Pack gives you everything you need to start recording in your project or home studio. The X1 Vocal Pack includes all your recording essentials: an sE X1 condenser microphone, a shock mount, an sE Metal Pop Filter and a high-quality 3m mic cable. The unique shockmount mounting system makes for quick and easy setup. Sweetwater knows that value is important to you, and the sE X1 Vocal Pack delivers it, bigtime. Great sound, incredible value Are you ready to be completely blown away by an inexpensive condenser mic? Then check out the sE Electronics sE X1 cardioid condenser mic. The sE X1 features one of sE Electronics's custom hand-made 1" diaphragms, which has a clear and rich sound. A 10dB pad and a Bass Cut switch add versatility to the sE X1's palette, making it well suited for a wide range of instruments, as well as vocals. One of the unique things about the sE X1 is its black rubber paint finish, which shrugs off the scrapes and dings any piece of heavily used studio gear is eventually exposed to. And once you hear this extraordinary microphone, you're going to want to use it on everything! Factor in the included, highly effective sE Shock Mount, sE Metal Pop Shield, and sE Mic Cable, and the sE X1 Vocal Pack is to good to pass up! sE X1 Vocal Pack Features at a Glance: Everything you need to start recording in your project or home studio: SE X1 Cardioid Condenser Mic sE Shock Mount sE Metal Pop Shield sE 3m Mic Cable Shop No. 345-D, 3rd Floor Star City Shopping Mall, Opp,Bambino Cinema Abdullah HaroonRoad Saddar Karachi Pakistan

Broadcast audio goes mobile The chainable mobile lavalier with built-in monitoring capability for all mobile devices You're a visionary videographer, an intrepid journalist, a dedicated podcaster. And when you're out in the field, you want to be able to record high-quality audio for your projects with the hands-free convenience of a lavalier microphone, and you want to do it without breaking the bank. That's where iRig Mic Lav comes in, it's an ultra-affordable and compact professional-quality mobile lavalier microphone for iPhone, iPad, iPod touch and Android. iRig Mic Lav is chainable. That means it can double your recording power by letting you easily chain up to two iRig Mic Lav's to the same device. Each iRig Mic Lav captures high-quality audio thanks to its omnidirectioinal condenser capsule and foam pop shield. And recording convenience is taken to the next level thanks to its on-board headphone monitoring output, secure mounting clip, generous cable length and durable roadworthy design. And best of all, you can have all these premium features at a price as small as the device itself. Portable performance iRig Mic Lav gives you the power to record great sounding audio anytime and anywhere. Designed to meet the exacting demands of broadcast professionals, its omnidirectional condenser capsule lets you capture a 30Hz - 16kHz frequency range of crystal-clear audio from all directions. It comes with a foam pop filter to eliminate vocal plosives, wind noises and other unwanted sounds. And like all good lavalier microphones, it comes with a durable mounting clip that you can easy mount on a t-shirt, lapel or other material for dependable and secure hands-free recording. Just clip it on, and you'll be ready to go. Effortless monitoring Capturing great audio in the field requires more than just superior microphone technology. To get the best sound, you have to be able to monitor your source as its being recorded. Not all lavalier microphones come with on-board monitoring, but iRig Mic Lav does. In fact, among major brands, it's the first mobile lavalier microphone to offer this feature. It comes with a combo 1/8" TRRS port that can be used to output audio to your favorite pair of headphones. Just set the toggle switch next to the port to "monitor" and plug in your headphones, and you'll be on your way to recording effortlessly amazing audio. Features Professional mobile lavalier microphone for all devices High-quality omnidirectional condenser capsule Includes foam pop shield and durable mounting clip 1/8" TRRS jack connects to iPhone, iPad, iPod touch, Android Combo 1/8" TRRS port can be used for headphone monitoring/line out to powered speaker Combo 1/8" TRRS port can be used for chaining up to two iRig Mic Lavs to the same device Compatible with any audio app that accepts audio from headset input Comes with a suite of powerful recording apps 150cm/66” cable Also available as 2 Pack – iRig Mic Lav 2 Pack

Price: Seller Type: An Individual Condition: Used Including with... AKG Condenser Mic. Focusrite Recording Interface. Condenser Mic Stand (Adjustable). Shockmount. POP Filter. Specifications are......... AKG PERCEPTION 120 CONDENCER MIC (Dual Diaphragm) The Perception 120 is a 2/3-inch diaphragm true condenser microphone that offers solid build quality, outstanding performance, and excellent value. The low-mass diaphragm delivers a clear sound with accurate sonic detail. A switchable 20 dB preattenuation pad and bass cut filter make the Perception 120 an excellent choice for a wide range of recording and live sound applications. Extended frequency response Roadworthy construction Switchable 20 dB preattenuation pad Switchable bass cut filter Designed and engineered by AKG in Vienna, Austria FOCUSRITE Saffire Pro 14 Interface With Saffire PRO 14, sonic integrity is never compromised. The two Focusrite preamps ensure low noise and distortion, whilst quality digital conversion and JetPLL™ jitter elimination technology ensure pristine quality as your audio flows between the analogue and digital domains. Combined with the very latest in Firewire interfacing technology, excellent routing flexibility and rock-solid driver stability, the Saffire PRO 14 is the heart of the modern home studio. Imported from UK. Excellent ADDA converters. Six-out audio interface with legendary sonic performance and unmatched flexibility. Including two award-winning Focusrite preamps. Combined with a host of additional I/O options. Get the tracks you want without having to constantly re-patch your studio. Alongside the two high quality mic preamps. Two additional analogue inputs, four analogue outputs. S/PDIF and MIDI open the door to true multi-track recording. Two Hi-Z instrument inputs let you plug straight in without the need to buy additional DI boxes. Two virtual 'loopback' inputs are also available for routing digital audio between software applications. Included with the PRO 14 is Saffire MixControl, an 18 x 6 DSP mixer. MixControl software enables you to create six separate mixes without latency. Intuitive one-click configurations help you track, monitor and mix as quickly as possible. Including mix-control software, plugins, music production softwares and library. Ideal for capturing online audio. All items are in excellent condition with complete accessories. Price: /- Only Further Details: -

EV Microphone N/D 967 Professional XLR Cable Brand New with Original Packing FEATURES Concert vocal mic Dynamic supercardioid pattern Optimized for live vocal performance Highest gain-before-feedback of live vocal mic Minimal transfer noise Internal Micro grill reduces "pops" Personality switch Removable front grille and pop filter Multistage shockmount Warm Grip handle 50Hz-13kHz frequency response Low signal-to-noise ratio