Meter power factor frequency monitor

Features: 1.Electrical parameter measurement function: voltage, current, active power, energy, frequency, power factor 2.Overload alarm function: overpower alarm threshold, backlight, and power flashing to alarm 3. Power alarm threshold preset function: can set power alarm threshold 4. The energy can be reset using the key 5.Store data when power off 6. Large-screen LCD can display six parameters at the same time 7.Backlight function 8.Key function Backlight control Short press the key to turning on or off the backlight, the backlight has a memory function, it can store the on or off state when power off. Reset energy Step1: Long press the key for 5 seconds until the energy value flashes, then release the key. Step2: Short press the key again, then the energy value is cleared and exit the reset flashing state. Step3: If there is no operation on the key within 5 seconds, it means the energy value is not cleared and will exit the reset state. Set power alarm threshold Step1: Long press the key until the LCD screen display “SET CLR”, then release the key to enter the setting state Step2: Power window displays the current power alarm value and the last digit begins to flash, then you can short press to plus 1 when there is no operating over 3 seconds, it will switch the digit position automatically, the setting method is as same as the above. Step3: After finish, the setting, long press the key over 5 seconds will store automatically and exit, the range of active power threshold is 0.0~2.5kW. Specifications: 1. Working voltage: 80-260VAC 2. Test voltage: 80-260VAC 3. Rated power: 5A/1100W 4. Operating frequency: 45-65Hz 5. Measurement accuracy: 1.0 grade Display format: 1.Power: test range: 0-1100W, Starting measure power: 0.2W Views: 4

Top-notch sound for your desktop system. The compact Studiophile AV 40 powered reference monitors deliver the same proven M-Audio technology favored by producers, recording engineers and musicians around the world. The combination of 4" polypropylene-coated drivers and 3/4" ferrofluid-cooled silk dome tweeters provides punchy lows, crisp highs and a balanced, uncolored response. Custom cabinets with dense wood construction deliver more accurate bass response than you could ever get from plastic multimedia speakers. And for the highest possible fidelity, the Studiophile AV 40 monitors also feature OptImage III wave-guide technology and a 20 watt-per-channel internal amplifier that utilizes Class A/B architecture. The Studiophile AV 40 monitor speakers are the perfect solution for traveling musicians or anyone who wants top-notch sound from their desktop multimedia system. Professional Components—Professional Results The Studiophile AV 40 monitors are designed with the same quality materials and internal electronics that are used in all of M-Audio's acclaimed professional monitors. You'll find features like audiophile-grade Class A/B amplifier architecture and balanced 1/4" TRS inputs in addition to RCAs. It all adds up to a big sound that belies the speakers' small size. With the Studiophile AV 40s, you don't have to give up professional-grade fidelity to enjoy the ease and mobility of a compact monitoring system. Magnetically Shielded for Desktop Use Unchecked, all speakers emit electromagnetic waves that can wreak havoc with your computer's video monitor or a nearby TV. The Studiophile AV 40 monitors are magnetically shielded so that all of your electronic equipment can coexist on your desktop without interference. Features 4" polypropylene-coated woofers 3/4" ferrofluid-cooled silk dome tweeters OptImage III tweeter wave guides for superior imaging 20-watt-per-channel amplifier with Class A/B architecture magnetic shielding 1/4" TRS balanced and RCA unbalanced inputs 1/8" headphone output 1/8" stereo auxiliary input front-panel volume control rear-panel on/off control bass boost control MDF cabinet with bass reflex port design Studiophile AV 40 Powered Reference Speaker System – Pair Specifications: Type: two-way desktop reference monitor Low-frequency Driver: 4" diameter, magnetically shielded and curved cone with high-temperature voice coil High-frequency Driver: 3/4" diameter, magnetically shielded silk dome tweeter Frequency Response: 85Hz - 20kHz Crossover Frequency: 2.7kHz RMS SPL: dB at 1 meter Signal-to-Noise Ratio: > 90dB (typical, A-weighted) Input Connectors: left and right RCA line input, left and right 1/4" TRS input and 1/8" aux input Polarity: positive signal at " " input produces outward low-frequency cone displacement Dynamic Power: 20 watts continuous, per channel into 4 ohms Input Impedance: 10 kOhms unbalanced, 20 kOhms balanced Input Sensitivity: 100 mV pink noise input produces 90dBA output SPL at 1 meter with volume control at maximum Protection: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter Indicator: Blue power LED ring around volume knob on front panel Power Requirements: V/~Hz, V/~Hz; powered via detachable 2-conductor line cord Cabinet: vinyl-laminated MDF Dimensions: 8.75" (H) x 6" (W) x 7.25" (D) Weight: 14lb./6.34 kg Shop No. 345-D, 3rd Floor Star City Shopping Mall, Opp,Bambino Cinema Abdullah Haroon Road Saddar Karachi Pakistan

Top-notch sound for your desktop system. The compact Studiophile AV 40 powered reference monitors deliver the same proven M-Audio technology favored by producers, recording engineers and musicians around the world. The combination of 4" polypropylene-coated drivers and 3/4" ferrofluid-cooled silk dome tweeters provides punchy lows, crisp highs and a balanced, uncolored response. Custom cabinets with dense wood construction deliver more accurate bass response than you could ever get from plastic multimedia speakers. And for the highest possible fidelity, the Studiophile AV 40 monitors also feature OptImage III wave-guide technology and a 20 watt-per-channel internal amplifier that utilizes Class A/B architecture. The Studiophile AV 40 monitor speakers are the perfect solution for traveling musicians or anyone who wants top-notch sound from their desktop multimedia system. Professional Components—Professional Results The Studiophile AV 40 monitors are designed with the same quality materials and internal electronics that are used in all of M-Audio's acclaimed professional monitors. You'll find features like audiophile-grade Class A/B amplifier architecture and balanced 1/4" TRS inputs in addition to RCAs. It all adds up to a big sound that belies the speakers' small size. With the Studiophile AV 40s, you don't have to give up professional-grade fidelity to enjoy the ease and mobility of a compact monitoring system. Magnetically Shielded for Desktop Use Unchecked, all speakers emit electromagnetic waves that can wreak havoc with your computer's video monitor or a nearby TV. The Studiophile AV 40 monitors are magnetically shielded so that all of your electronic equipment can coexist on your desktop without interference. Features 4" polypropylene-coated woofers 3/4" ferrofluid-cooled silk dome tweeters OptImage III tweeter wave guides for superior imaging 20-watt-per-channel amplifier with Class A/B architecture magnetic shielding 1/4" TRS balanced and RCA unbalanced inputs 1/8" headphone output 1/8" stereo auxiliary input front-panel volume control rear-panel on/off control bass boost control MDF cabinet with bass reflex port design Studiophile AV 40 Powered Reference Speaker System – Pair Specifications: Type: two-way desktop reference monitor Low-frequency Driver: 4" diameter, magnetically shielded and curved cone with high-temperature voice coil High-frequency Driver: 3/4" diameter, magnetically shielded silk dome tweeter Frequency Response: 85Hz - 20kHz Crossover Frequency: 2.7kHz RMS SPL: dB at 1 meter Signal-to-Noise Ratio: > 90dB (typical, A-weighted) Input Connectors: left and right RCA line input, left and right 1/4" TRS input and 1/8" aux input Polarity: positive signal at " " input produces outward low-frequency cone displacement Dynamic Power: 20 watts continuous, per channel into 4 ohms Input Impedance: 10 kOhms unbalanced, 20 kOhms balanced Input Sensitivity: 100 mV pink noise input produces 90dBA output SPL at 1 meter with volume control at maximum Protection: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter Indicator: Blue power LED ring around volume knob on front panel Power Requirements: V/~Hz, V/~Hz; powered via detachable 2-conductor line cord Cabinet: vinyl-laminated MDF Dimensions: 8.75" (H) x 6" (W) x 7.25" (D) Weight: 14lb./6.34 kg

Top-notch sound for your desktop system. The compact Studiophile AV 40 powered reference monitors deliver the same proven M-Audio technology favored by producers, recording engineers and musicians around the world. The combination of 4" polypropylene-coated drivers and 3/4" ferrofluid-cooled silk dome tweeters provides punchy lows, crisp highs and a balanced, uncolored response. Custom cabinets with dense wood construction deliver more accurate bass response than you could ever get from plastic multimedia speakers. And for the highest possible fidelity, the Studiophile AV 40 monitors also feature OptImage III wave-guide technology and a 20 watt-per-channel internal amplifier that utilizes Class A/B architecture. The Studiophile AV 40 monitor speakers are the perfect solution for traveling musicians or anyone who wants top-notch sound from their desktop multimedia system. Professional Components—Professional Results The Studiophile AV 40 monitors are designed with the same quality materials and internal electronics that are used in all of M-Audio's acclaimed professional monitors. You'll find features like audiophile-grade Class A/B amplifier architecture and balanced 1/4" TRS inputs in addition to RCAs. It all adds up to a big sound that belies the speakers' small size. With the Studiophile AV 40s, you don't have to give up professional-grade fidelity to enjoy the ease and mobility of a compact monitoring system. Magnetically Shielded for Desktop Use Unchecked, all speakers emit electromagnetic waves that can wreak havoc with your computer's video monitor or a nearby TV. The Studiophile AV 40 monitors are magnetically shielded so that all of your electronic equipment can coexist on your desktop without interference. Features 4" polypropylene-coated woofers 3/4" ferrofluid-cooled silk dome tweeters OptImage III tweeter wave guides for superior imaging 20-watt-per-channel amplifier with Class A/B architecture magnetic shielding 1/4" TRS balanced and RCA unbalanced inputs 1/8" headphone output 1/8" stereo auxiliary input front-panel volume control rear-panel on/off control bass boost control MDF cabinet with bass reflex port design Studiophile AV 40 Powered Reference Speaker System – Pair Specifications: Type: two-way desktop reference monitor Low-frequency Driver: 4" diameter, magnetically shielded and curved cone with high-temperature voice coil High-frequency Driver: 3/4" diameter, magnetically shielded silk dome tweeter Frequency Response: 85Hz - 20kHz Crossover Frequency: 2.7kHz RMS SPL: 101.5dB at 1 meter Signal-to-Noise Ratio: > 90dB (typical, A-weighted) Input Connectors: left and right RCA line input, left and right 1/4" TRS input and 1/8" aux input Polarity: positive signal at " " input produces outward low-frequency cone displacement Dynamic Power: 20 watts continuous, per channel into 4 ohms Input Impedance: 10 kOhms unbalanced, 20 kOhms balanced Input Sensitivity: 100 mV pink noise input produces 90dBA output SPL at 1 meter with volume control at maximum Protection: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter Indicator: Blue power LED ring around volume knob on front panel Power Requirements: 100-120V/~50/60Hz, 220-240V/~50/60Hz; powered via detachable 2-conductor line cord Cabinet: vinyl-laminated MDF Dimensions: 8.75" (H) x 6" (W) x 7.25" (D) Weight: 14lb./6.34 kg

Professional Components—Professional Results The Studiophile AV 40 monitors are designed with the same quality materials and internal electronics that are used in all of M-Audio's acclaimed professional monitors. You'll find features like audiophile-grade Class A/B amplifier architecture and balanced 1/4" TRS inputs in addition to RCAs. It all adds up to a big sound that belies the speakers' small size. With the Studiophile AV 40s, you don't have to give up professional-grade fidelity to enjoy the ease and mobility of a compact monitoring system. Magnetically Shielded for Desktop Use Unchecked, all speakers emit electromagnetic waves that can wreak havoc with your computer's video monitor or a nearby TV. The Studiophile AV 40 monitors are magnetically shielded so that all of your electronic equipment can coexist on your desktop without interference. Features 4" polypropylene-coated woofers 3/4" ferrofluid-cooled silk dome tweeters OptImage III tweeter wave guides for superior imaging 20-watt-per-channel amplifier with Class A/B architecture magnetic shielding 1/4" TRS balanced and RCA unbalanced inputs 1/8" headphone output 1/8" stereo auxiliary input front-panel volume control rear-panel on/off control bass boost control MDF cabinet with bass reflex port design Studiophile AV 40 Powered Reference Speaker System – Pair Specifications: Type: two-way desktop reference monitor Low-frequency Driver: 4" diameter, magnetically shielded and curved cone with high-temperature voice coil High-frequency Driver: 3/4" diameter, magnetically shielded silk dome tweeter Frequency Response: 85Hz - 20kHz Crossover Frequency: 2.7kHz RMS SPL: 101.5dB at 1 meter Signal-to-Noise Ratio: > 90dB (typical, A-weighted) Input Connectors: left and right RCA line input, left and right 1/4" TRS input and 1/8" aux input Polarity: positive signal at " " input produces outward low-frequency cone displacement Dynamic Power: 20 watts continuous, per channel into 4 ohms Input Impedance: 10 kOhms unbalanced, 20 kOhms balanced Input Sensitivity: 100 mV pink noise input produces 90dBA output SPL at 1 meter with volume control at maximum Protection: RF interference, output current limiting, over temperature, turn on/off transient, subsonic filter Indicator: Blue power LED ring around volume knob on front panel Power Requirements: 100-120V/~50/60Hz, 220-240V/~50/60Hz; powered via detachable 2-conductor line cord Cabinet: vinyl-laminated MDF Dimensions: 8.75" (H) x 6" (W) x 7.25" (D) Weight: 14lb./6.34 kg Condition 10/10

Type Portable PA System Feeling Jazz by Yamaha - The Musical Instruments Studio Contact: - Free Home Delievry:) 1 Year Company Warranty ! We are Authorized Dealer of Yamaha musical instruments and Audio Video Products in Pakistan. We sell only Original Products With Company Warranty @ lowest prices with compare to Market. Portable power for gigging or monitoring!Even lighter than its big brothers, the STAGEPAS 150M consists of a convenient, removable, powered mixer that fits inside the speakers for transport and a handy pole mount receptacle. Plus, a Stereo Link Out and ST SUB OUT jacks help you feed any external speakers, mixers, or recording devices. The STAGEPAS 150M is a compact all-in-one powered PA system aimed squarely at giving keyboardists a great way to monitor themselves as well as functioning as a mono PA. Packing 150-watts of power driving eight channels of audio, the STAGEPAS 150M offers great sound anywhere you go! Yamaha STAGEPAS 150M at a Glance: Power to go! 8-channel powered mixer 150 watts of Class D power Ideal for monitor speaker use Power to go! The STAGEPAS 150M is much lighter and more compact, provides a unique form factor and feature set optimized for keyboardists, and, most importantly, delivers the goods when it comes to sound quality. This single-speaker system also functions very effectively as ultra-portable mono PA system that is upgradeable to stereo with the simple addition of an optional powered speaker. 8-channel powered mixer The STAGEPAS 150M provides a total of eight input channels: two mono microphone/line inputs and three stereo line inputs. Along with the output for the supplied speaker, the built-in yet detachable mixer also has line outputs that can be used to connect additional powered speakers or to send the mixer's output to a main mixer or recording device. A convenient PHONES jack is also included for connecting a set of headphones. 150 watts of Class D power This power amplifier is all you'll need for most small venues and street performance situations, as well as personal monitoring applications. The advanced Class-D design delivers exceptional efficiency - ensuring high power amplification with low power consumption and minimal heat generation. This means you get superior sound quality and reliability in a remarkably compact unit. Ideal for monitor speaker use The STAGEPAS 150M is also effective as a monitor speaker system (especially for keyboard players, drummers and solo performers), thanks to its full-range reproduction, convenient mixing controls, and versatile speaker placement. Or the STAGEPAS 150 can be mounted on a standard speaker stand using an optional mount adaptor. Yamaha STAGEPAS 150M Features: Detachable Powered Mixer 150W of Class D power Two-way full-range speaker system Built-in EQ and 1-bit modulation reverb Music/Speech switch Auto limiter LED output level meter One speaker cable supplied Yamaha's STAGEPAS 150M is the perfect monitoring or PA system for gigging keyboardists!

M-Audio AV32 Compact Desktop Speakers for Professional Media Creation (Pair) Product Highlights 3" Polypropylene-Coated Woofer 1" Ferrofluid-Cooled Silk Cone Tweeter Optimage IV Tweeter Wave Guides 10W per Channel into 4 ohms 80 to 20,000 Hz Acoustically-Inert MDF Cabinet RCA and 1/8" Aux Inputs Front-Panel Volume Control Front Panel 1/8" Headphone Output Acoustically-Inert MDF Cabinet M-Audio AV32 Overview The M-Audio AV32 Compact Desktop Speakers for Professional Media Creation (Pair) use acoustically-inert MDF cabinets to eliminate resonances, and 10W per Channel into 4 ohms per channel into a 3" polypropylene woofer in a bass reflex design. The woofer is complemented by a 1" wave-guided ferrofluid cooled silk dome tweeter to deliver a frequency response of 80 to 20,000 Hz and an RMS SPL level of 101.5 dB at 1 meter. The rear panel of the monitors feature RCA inputs for connecting gaming systems, DJ gear, mixers and more. A front panel 1/8" (3.5mm) stereo auxiliary input allows for the connection of a laptop, smartphone, or other mobile device. A front panel 1/8" headphone output allows you to monitor directly using headphones. The monitors are suitable for a wide range of professional and consumer applications. M-Audio AV32 Specs Type Two-way desktop reference speaker Input Connectors 2x RCA (left and right line inputs) 1x 1/8" aux input Low Frequency Driver 3.0" (7.6 cm) polypropylene-coated woofer with high-temperature voice coil High Frequency Driver 1.0" (2.5 cm) silk cone tweeter Frequency Response 80 to 20,000 Hz Crossover Frequency 3.3 kHz RMS Level 101.5 dB at 1 m SNR >90 dB (typical, A-weighted) Polarity Positive signal at "+" input produces outward low-frequency cone displacement Dynamic Power 10 W per channel at 4 ohm Input Impedance 10 kilOhm unbalanced Input Sensitivity 100 mV pink noise input produces 90 dBA output SPL at 1 meter with volume control at maximum Protection RF interference Output current limiting Over temperature Turn on/off transient Subsonic filter Indicators Blue power LED for aligning wave guide Power Requirements 100 to 120 V at 50/60 Hz 200 to 240 V at 50/60 Hz Powered via detachable 2-conductor line cord Cabinet Vinyl-laminated MDF Dimensions (H x W x D) 7.9 x 5.3 x 6.3" (20.1 x 13.5 x 16.0 cm) Weight 11.7 lb (5.3 kg) Packaging Info Package Weight 7.0 lb Box Dimensions (LxWxH) 14.3 x 9.8 x 8.2" Views: 3

Type Audio Midi Interfaces Product Description A 24-bit USB recording interface. The compact Alesis iO2 EXPRESS audio-recording interface is ideal for home studios and portable recording setups. The 2-channel USB interface for Mac and PC-based systems enables you to record at up to 24-bit resolution for input into virtually all DAW, recording, and performance software. The Alesis i02 EXPRESS recording interface is small enough to comfortably fit into your mobile recording rig, laptop bag, or backpack, yet it contains high-quality components and circuitry suitable for the studio. Flexible recording and playback The i02 EXPRESS interface's discrete-design preamplifiers and true 48-volt phantom power ensure that you capture microphones' complete signal. High quality analog-to-digital and digital-to-analog converters ensure that every detail of your session or performance gets recorded – and played back on your monitoring system. It's class compliant, so you can use the plug-and-play Alesis iO2 EXPRESS with virtually any computer. The iO2 EXPRESS is USB bus powered so you won't need to carry a bulky power supply, and its performance is optimized for minimal laptop battery drain so you'll be able to track long sessions and gigs remotely. Complete iO The iO2 EXPRESS has 2 input channels. Each channel has an XLR microphone input, a 1/4" TRS insert for external effects units, and a 1/4" TS jack that works with line-level sources and can accommodate direct connection of guitars. The Alesis iO2 EXPRESS sends and receives 2 audio channels on a single USB cable for simple, universal interface. You can monitor your sessions on any studio monitoring or other loudspeaker system via dual 1/4" balanced outputs. For remote tracking and alternative playback, the iO2 EXPRESS has a 1/4" TRS headphone output. The iO2 EXPRESS features traditional MIDI In and Out jacks for playing and controlling software with keyboard and pad controllers, workstations, and other MIDI-compatible instruments. Level management Each channel has a gain trim control, and there's a master level control for optimal gain staging. When monitoring on headphones, you'll appreciate the dedicated volume control. You can also visually monitor levels and operation using the tricolor, stereo metering tree and lighted status indicators. Complete the package The Alesis iO2 EXPRESS comes complete with a copy of Steinberg Cubase LE digital audio workstation (DAW) software. Cubase is one of the most popular DAWs in the world thanks to its intuitive approach to composing, recording, editing, and mixing. In addition to the included software, the Alesis iO2 EXPRESS is compatible with virtually all audio and MIDI software. Features 2-channel computer audio recording interface Record up to 24-bit/48kHz audio into virtually any software Monitor sessions with balanced studio monitor and headphone outputs High-quality A/D and D/A converters, discrete-design preamps, 48V phantom power Inputs for microphones, line-level sources, and instruments including guitars Tricolor stereo level meter and lighted status indicators for visual monitoring MIDI Input and Output jacks for playing and controlling software instruments USB bus powered – no external power supply needed Includes: iO2 EXPRESS interface USB cable iO2 Express Audio Interface Specifications: SYSTEM REQUIREMENTS Mac: OS X 10.2+ Windows: XP, Vista, or 7 USB port FREQUENCY RESPONSE MIC/LINE IN to USB OUT: ±0.1dB MIC/LINE IN to MAIN OUT (through ADC/DAC) ±0.35dB SIGNAL-TO-NOISE RATIO (SNR) MIC/LINE IN (balanced) to INSERT OUT: 110dB A-weighted, input impedance at XLR or 1/4" jack = 600 ohms GUITAR IN (unbalanced) to INSERT OUT: 99dB A-weighted, input impedance at 1/4" jack = 600 ohms MIC/LINE IN (balanced) to USB OUT: 99dB A-weighted, input impedance at MIC or LINE jack = 600 ohms GUITAR IN (unbalanced) to USB OUT: 94dB A-weighted, input impedance at 1/4" jack = 600 ohms MIC/LINE IN (balanced) to MAIN OUT (through ADC/DAC): 97dB A-weighted, input impedance at MIC or LINE jack = 600 ohms MIC/LINE IN (balanced) to MAIN OUT (through direct monitor): 95dB A-weighted, input impedance at MIC or LINE jack = 600 ohms TOTAL HARMONIC DISTORTION + NOISE (THD+N) MIC/LINE IN (balanced) to INSERT OUT: GUITAR IN (unbalanced) to INSERT OUT: % Input Gain = minimum, 1KHz input signal, INSERT OUT = 5.3dBV MIC/LINE IN (balanced) to USB OUT: % Input Gain = minimum, 1KHz input signal, USB OUT = -0.3dBFS GUITAR IN (unbalanced) to USB OUT: % Input Gain = minimum, 1KHz input signal, USB OUT = -0.7dBFS MIC/LINE IN (balanced) to MAIN OUT (through ADC/DAC): % Input Gain = minimum, 1KHz input signal, MAIN OUT = 5.6dBV MIC/LINE IN (balanced) to MAIN OUT (through direct monitor): % Input Gain = minimum, 1KHz input signal, MAIN OUT = 5.6dBV

Yamaha NS-10M Studio Reference Monitors The NS-10M family are all PASSIVE speakers. - You will need an amplifier, as opposed to many newer monitor speakers which have an integrated amplifier. (For example, the new YAMAHA HS50M and YAMAHA HS80M which are follow-ups to the NS-10M family!). FEATURES: - Compact, high performance configuration - Optimum woofer/tweeter matching - Careful crossover design - Smooth transition between frequency ranges - Minimum phase variation - Rugged horizontal placement design - Overall construction is exceptionally rugged - Withstands the rigors of continuous use Dimensions: Width: inch Height: 8.50 inch Depth: 7.80 inch Weight: lbs Loudspeaker Type: 2 way bookshelf Frequency Range: 60 Hz to 20 kHz Power Handling: 60 watts (program), 120 watts (max) Nominal Impedance: 8 ohm Sensitivity 1 W / 1 m: 90 dB SPL Crossover Frequency: 2 kHz (12 dB / oct) Components: LF JA cm cone), HF JAA (3.5 cm soft dome) Enclosure: Real wood, black finish Yamaha M-35 Natural Sound Amp Description Designed to drive the presence speakers used with the DSP-1, the M-35 is a switchable 2 or 4 channel power amplifier that lets you adjust each channel independently to compensate for any listening environment irregularities, and to finely adjust the surround effect to your particular taste. Specifications Power output: 20W (4 channel) Frequency response: 20Hz to 20kHz Total harmonic distortion: % Damping factor: 70 Input sensitivity: 0.7V Signal to noise ratio: 113dB Dimensions: 435 x 92.5 x mm Weight: 5kg

Music power 94W (4 ohms, 1kHz) THD (at the time of an Output power) Main Amp: 0.1% or less Cross modulation distortion Main Amp: 0.1% or less (70Hz:7kHz=4:1, SMPTE) Power Band Width (IHF) 5Hz - 40kHz (8 ohm, one-side-channel operation) Frequency characteristic (at the time of 1W output) Phono1, 2:30Hz-15kHz±0.5dB (RIAA deflection) Aux: 10Hz-30kHz±1.0dB Main Amp: 10Hz-40kHz±1.0dB Dumping factor 40 (8ohm) Input sensitivity/impedance (1kHz) Phono1:2.5mV/50kohm Phono2:2.5mV/50kohm Tuner, Aux, 4ch adaptor, and Tape monitor(pin/din):100mV /, 50kohm Main Amp: 800mV / 40kohm Phono maximum permissible input 300mV (less than THD 0.5%) Output voltage (1kHz) Tape Rec(Pin/Din):100mV/30mV 4ch Adaptor:100mV Pre Amp: 0.8V (less than THD 0.08%) 4.0V (a maxima and less than THD 0.5%) A hum and a noise (IHF) Phono1, 2:70dB or more Tuner, AUX: 80dB or more Main Amp: 100dB or more Tone control Bass: ±15dB (50Hz) Treble:±15dB (15kHz) loudness (Volume-30dB o'clock) + 10dB (50Hz) and +8dB (15kHz) A low filter - 12dB (50Hz, 6 dB/oct) A high filter - 12dB (10kHz, 6 dB/oct) Muting -20dB Power dissipation (maxima) 65W(125VA) Dimensions Width 440x height 140x depth of 322mm Weight 11.5kg