Laboratory type

Professional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336Professional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary from Oct 26th

Civil Lab Technician Course in Taxila, Sahiwal New session of course will be started soon in international college of technical education. Admission are open in international college of technical education for both boys and girls 923115193625. International college of technical offers Management courses, Technical courses, Safety courses and different type of courses and diplomas . All the courses and diplomas offered by international college of technical education is acceptable in whole world. civil lab technician is a professional engineering discipline that deals with the design, construction, and maintenance of the physical and naturally built environment, including works like roads, bridges, canals, dams, and buildings. Lab technicians are skilled workers that work with complex systems or perform highly technical mechanical or diagnostic tests in medical or scientific laboratories. ... Lab technicians might collect samples, study and perform tests on body fluids, teeth, chemical compounds, biological specimens, or other fields of science. The Engineering Lab Technician is responsible for the product performance testing and calibration of Lab test equipment. Typical responsibilities of a lab technician include: conducting and supporting scientific investigations and experiments. planning, setting up and undertaking controlled experiments and trials. recording and analysing data. Lab culture may seem boring, as the daily tasks are usually pretty tedious, but I can tell you for sure that the undergraduates that get the most out of it are the ones that engage in the whole process. Education. Lab technicians need at minimum a high school diploma or equivalent to work. Most companies prefer at least an Associate's Degree in Laboratory Science or related major. It can be helpful to earn a degree from an institution accredited by the National Accrediting Agency for Clinical Laboratory Sciences. An engineering technician sits between a skilled craft worker and a Technologist. Engineers apply techniques of engineering analysis in testing, production, or maintenance. Analytical engineers may supervise production in factories and elsewhere, determine the causes of a process failure, and test output to maintain quality. An engineering technologist is a specialist dedicated to the development, design, and implementation of engineering and technology. Engineering technology education is more of a broad specialized and applied engineering education. Engineering Technologists often work under traditional engineers. However the Engineering Technologist Mobility Forum indicates that an engineering technologist's work should have required the exercise of independent engineering judgment for manufacturing firms, product improvement, design and construction, and government agencies applying engineering principles and technical skills. civil lab technician is traditionally broken into a number of sub-disciplines. It is the second-oldest engineering discipline after military engineering, and it is defined to distinguish non-military engineering from military engineering. civil lab technician takes place in the public sector from municipal through to national governments, and in the private sector from individual homeowners through to international companies. Civil Lab Technician Course in Rawalpindi, Islamabad, Lahore, Karachi, Gilgit, Skardu, Ghangche, taxila, Shigar, Astore, Diamer, Ghizer, Kharmang, Gultari, Rondo, Hunza Nagar, Gupi, Azad Jammu and Kashmir, Muzaffarabad, Mirpur, Bhimber, Kotli, Rawlakot, Bagh, Bahawalpur, Bhakkar, Chakwal, Chiniot, Dera Ghazi Khan, Faisalabad, Gujranwala, Gujrat, Hafizabad, Jhang, Jhelum, Kasur, Khanewal, Khushab, Layyah, Lodharan, Mandi-Bahuddin, Mianwali, Multan, Muzaffargarh, Nankana Sahib, Narowal, Okara, Pakpattan, Rahim Yar Khan, Rajanpur, Sahiwal, Sargodha, Sheikhupura, Sialkot, Toba tek Singh, Vehari, Attock, Taxila, Wah Cantt, Rawalpindi, Balochistan, Khyber-Pakhtunkhwa, Punjab, Sindh, Gilgit Baltistan, Turbat, Sibi, Chaman, Lasbela, Zhob, Gwadar, Nasiraba, Jaffarabad, Hub, Dera Murad Jamali, Dera Allah Yar, Khyber-Pakhtunkhwa, Peshawar, Mardan, Abbottabad, Mingor, Kohat, Bannu, Swabi, Dera Ismail Khan, Charsadda, Nowshera, Mansehra, Hyderabad, Sukkur, Larkana, Nawabshah, Nanak wara, Mirpur Khas, Jacobabad, Shikarpur, Khairpur, Pakistan. for further detail of all courses our the website www.icollegete.com www.courses.com.pk

Civil Lab Technician Course in Gujranwala, Kohat New session of course will be started soon in international college of technical education. Admission are open in international college of technical education for both boys and girls 923115193625. International college of technical offers Management courses, Technical courses, Safety courses and different type of courses and diplomas . All the courses and diplomas offered by international college of technical education is acceptable in whole world. Civil lab technician is a professional engineering discipline that deals with the design, construction, and maintenance of the physical and naturally built environment, including works like roads, bridges, canals, dams, and buildings. Lab technicians are skilled workers that work with complex systems or perform highly technical mechanical or diagnostic tests in medical or scientific laboratories. ... Lab technicians might collect samples, study and perform tests on body fluids, teeth, chemical compounds, biological specimens, or other fields of science. The Engineering Lab Technician is responsible for the product performance testing and calibration of Lab test equipment. Typical responsibilities of a lab technician include: conducting and supporting scientific investigations and experiments. planning, setting up and undertaking controlled experiments and trials. recording and analysing data. Lab culture may seem boring, as the daily tasks are usually pretty tedious, but I can tell you for sure that the undergraduates that get the most out of it are the ones that engage in the whole process. Education. Lab technicians need at minimum a high school diploma or equivalent to work. Most companies prefer at least an Associate's Degree in Laboratory Science or related major. It can be helpful to earn a degree from an institution accredited by the National Accrediting Agency for Clinical Laboratory Sciences. An engineering technician sits between a skilled craft worker and a Technologist. Engineers apply techniques of engineering analysis in testing, production, or maintenance. Analytical engineers may supervise production in factories and elsewhere, determine the causes of a process failure, and test output to maintain quality. An engineering technologist is a specialist dedicated to the development, design, and implementation of engineering and technology. Engineering technology education is more of a broad specialized and applied engineering education. Engineering Technologists often work under traditional engineers. However the Engineering Technologist Mobility Forum indicates that an engineering technologist's work should have required the exercise of independent engineering judgment for manufacturing firms, product improvement, design and construction, and government agencies applying engineering principles and technical skills. civil lab technician is traditionally broken into a number of sub-disciplines. It is the second-oldest engineering discipline after military engineering, and it is defined to distinguish non-military engineering from military engineering. civil lab technician takes place in the public sector from municipal through to national governments, and in the private sector from individual homeowners through to international companies. Civil Lab Technician Course in Rawalpindi, Islamabad, Lahore, Karachi, Gilgit, Skardu, Ghangche, taxila, Shigar, Astore, Diamer, Ghizer, Kharmang, Gultari, Rondo, Hunza Nagar, Gupi, Azad Jammu and Kashmir, Muzaffarabad, Mirpur, Bhimber, Kotli, Rawlakot, Bagh, Bahawalpur, Bhakkar, Chakwal, Chiniot, Dera Ghazi Khan, Faisalabad, Gujranwala, Gujrat, Hafizabad, Jhang, Jhelum, Kasur, Khanewal, Khushab, Layyah, Lodharan, Mandi-Bahuddin, Mianwali, Multan, Muzaffargarh, Nankana Sahib, Narowal, Okara, Pakpattan, Rahim Yar Khan, Rajanpur, Sahiwal, Sargodha, Sheikhupura, Sialkot, Toba tek Singh, Vehari, Attock, Taxila, Wah Cantt, Rawalpindi, Balochistan, Khyber-Pakhtunkhwa, Punjab, Sindh, Gilgit Baltistan, Turbat, Sibi, Chaman, Lasbela, Zhob, Gwadar, Nasiraba, Jaffarabad, Hub, Dera Murad Jamali, Dera Allah Yar, Khyber-Pakhtunkhwa, Peshawar, Mardan, Abbottabad, Mingor, Kohat, Bannu, Swabi, Dera Ismail Khan, Charsadda, Nowshera, Mansehra, Hyderabad, Sukkur, Larkana, Nawabshah, Nanak wara, Mirpur Khas, Jacobabad, Shikarpur, Khairpur, Pakistan. for further detail of all courses our the website www.icollegete.com www.courses.com.pk

Civil Lab Technician Course in Peshawar, Mardan New session of course will be started soon in international college of technical education. Admission are open in international college of technical education for both boys and girls 923115193625. International college of technical offers Management courses, Technical courses, Safety courses and different type of courses and diplomas . All the courses and diplomas offered by international college of technical education is acceptable in whole world. Civil lab technician is a professional engineering discipline that deals with the design, construction, and maintenance of the physical and naturally built environment, including works like roads, bridges, canals, dams, and buildings. Lab technicians are skilled workers that work with complex systems or perform highly technical mechanical or diagnostic tests in medical or scientific laboratories. ... Lab technicians might collect samples, study and perform tests on body fluids, teeth, chemical compounds, biological specimens, or other fields of science. The Engineering Lab Technician is responsible for the product performance testing and calibration of Lab test equipment. Typical responsibilities of a lab technician include: conducting and supporting scientific investigations and experiments. planning, setting up and undertaking controlled experiments and trials. recording and analysing data. Lab culture may seem boring, as the daily tasks are usually pretty tedious, but I can tell you for sure that the undergraduates that get the most out of it are the ones that engage in the whole process. Education. Lab technicians need at minimum a high school diploma or equivalent to work. Most companies prefer at least an Associate's Degree in Laboratory Science or related major. It can be helpful to earn a degree from an institution accredited by the National Accrediting Agency for Clinical Laboratory Sciences. An engineering technician sits between a skilled craft worker and a Technologist. Engineers apply techniques of engineering analysis in testing, production, or maintenance. Analytical engineers may supervise production in factories and elsewhere, determine the causes of a process failure, and test output to maintain quality. An engineering technologist is a specialist dedicated to the development, design, and implementation of engineering and technology. Engineering technology education is more of a broad specialized and applied engineering education. Engineering Technologists often work under traditional engineers. However the Engineering Technologist Mobility Forum indicates that an engineering technologist's work should have required the exercise of independent engineering judgment for manufacturing firms, product improvement, design and construction, and government agencies applying engineering principles and technical skills. civil lab technician is traditionally broken into a number of sub-disciplines. It is the second-oldest engineering discipline after military engineering, and it is defined to distinguish non-military engineering from military engineering. civil lab technician takes place in the public sector from municipal through to national governments, and in the private sector from individual homeowners through to international companies. Civil Lab Technician Course in Rawalpindi, Islamabad, Lahore, Karachi, Gilgit, Skardu, Ghangche, taxila, Shigar, Astore, Diamer, Ghizer, Kharmang, Gultari, Rondo, Hunza Nagar, Gupi, Azad Jammu and Kashmir, Muzaffarabad, Mirpur, Bhimber, Kotli, Rawlakot, Bagh, Bahawalpur, Bhakkar, Chakwal, Chiniot, Dera Ghazi Khan, Faisalabad, Gujranwala, Gujrat, Hafizabad, Jhang, Jhelum, Kasur, Khanewal, Khushab, Layyah, Lodharan, Mandi-Bahuddin, Mianwali, Multan, Muzaffargarh, Nankana Sahib, Narowal, Okara, Pakpattan, Rahim Yar Khan, Rajanpur, Sahiwal, Sargodha, Sheikhupura, Sialkot, Toba tek Singh, Vehari, Attock, Taxila, Wah Cantt, Rawalpindi, Balochistan, Khyber-Pakhtunkhwa, Punjab, Sindh, Gilgit Baltistan, Turbat, Sibi, Chaman, Lasbela, Zhob, Gwadar, Nasiraba, Jaffarabad, Hub, Dera Murad Jamali, Dera Allah Yar, Khyber-Pakhtunkhwa, Peshawar, Mardan, Abbottabad, Mingor, Kohat, Bannu, Swabi, Dera Ismail Khan, Charsadda, Nowshera, Mansehra, Hyderabad, Sukkur, Larkana, Nawabshah, Nanak wara, Mirpur Khas, Jacobabad, Shikarpur, Khairpur, Pakistan. for further detail of all courses our the website www.icollegete.com www.courses.com.pk

Civil Lab Technician Course in Shams Abad, Murree Road 03354176949, New session of course will be started soon in international college of technical education. Admission are open in international college of technical education for both boys and girls 923115193625. International college of technical offers Management courses, Technical courses, Safety courses and different type of courses and diplomas . All the courses and diplomas offered by international college of technical education is acceptable in whole world. Civil lab technician is a professional engineering discipline that deals with the design, construction, and maintenance of the physical and naturally built environment, including works like roads, bridges, canals, dams, and buildings. Lab technicians are skilled workers that work with complex systems or perform highly technical mechanical or diagnostic tests in medical or scientific laboratories. ... Lab technicians might collect samples, study and perform tests on body fluids, teeth, chemical compounds, biological specimens, or other fields of science. The Engineering Lab Technician is responsible for the product performance testing and calibration of Lab test equipment. Typical responsibilities of a lab technician include: conducting and supporting scientific investigations and experiments. planning, setting up and undertaking controlled experiments and trials. recording and analysing data. Lab culture may seem boring, as the daily tasks are usually pretty tedious, but I can tell you for sure that the undergraduates that get the most out of it are the ones that engage in the whole process. Education. Lab technicians need at minimum a high school diploma or equivalent to work. Most companies prefer at least an Associate's Degree in Laboratory Science or related major. It can be helpful to earn a degree from an institution accredited by the National Accrediting Agency for Clinical Laboratory Sciences. An engineering technician sits between a skilled craft worker and a Technologist. Engineers apply techniques of engineering analysis in testing, production, or maintenance. Analytical engineers may supervise production in factories and elsewhere, determine the causes of a process failure, and test output to maintain quality. An engineering technologist is a specialist dedicated to the development, design, and implementation of engineering and technology. Engineering technology education is more of a broad specialized and applied engineering education. Engineering Technologists often work under traditional engineers. However the Engineering Technologist Mobility Forum indicates that an engineering technologist's work should have required the exercise of independent engineering judgment for manufacturing firms, product improvement, design and construction, and government agencies applying engineering principles and technical skills. civil lab technician is traditionally broken into a number of sub-disciplines. It is the second-oldest engineering discipline after military engineering, and it is defined to distinguish non-military engineering from military engineering. civil lab technician takes place in the public sector from municipal through to national governments, and in the private sector from individual homeowners through to international companies. Civil Lab Technician Course in Rawalpindi, Islamabad, Lahore, Karachi, Gilgit, Skardu, Ghangche, taxila, Shigar, Astore, Diamer, Ghizer, Kharmang, Gultari, Rondo, Hunza Nagar, Gupi, Azad Jammu and Kashmir, Muzaffarabad, Mirpur, Bhimber, Kotli, Rawlakot, Bagh, Bahawalpur, Bhakkar, Chakwal, Chiniot, Dera Ghazi Khan, Faisalabad, Gujranwala, Gujrat, Hafizabad, Jhang, Jhelum, Kasur, Khanewal, Khushab, Layyah, Lodharan, Mandi-Bahuddin, Mianwali, Multan, Muzaffargarh, Nankana Sahib, Narowal, Okara, Pakpattan, Rahim Yar Khan, Rajanpur, Sahiwal, Sargodha, Sheikhupura, Sialkot, Toba tek Singh, Vehari, Attock, Taxila, Wah Cantt, Rawalpindi, Balochistan, Khyber-Pakhtunkhwa, Punjab, Sindh, Gilgit Baltistan, Turbat, Sibi, Chaman, Lasbela, Zhob, Gwadar, Nasiraba, Jaffarabad, Hub, Dera Murad Jamali, Dera Allah Yar, Khyber-Pakhtunkhwa, Peshawar, Mardan, Abbottabad, Mingor, Kohat, Bannu, Swabi, Dera Ismail Khan, Charsadda, Nowshera, Mansehra, Hyderabad, Sukkur, Larkana, Nawabshah, Nanak wara, Mirpur Khas, Jacobabad, Shikarpur, Khairpur, Pakistan. for further detail of all courses Visit our website www.icollegete.com www.courses.com.pk

Instant Digital LCD Food BBQ Meat Chocolate Oven Cooking Probe Thermometer   Features: Working temperature range for the body, 0-50Celsius Shape and sensitive product Thermometer for your kitchen, laboratory, factory or BBQ. Protective plastic sheath. Table 180°head angle adjustment design. Type: Instant Read Display Type: Digital Color: White Power Source: 1 x AG13 Button Battery Temperature Range: -50-300 Celsius Sensor Wire Length: 15cm/5.91''(Approx.) Product Size: 4.4cm x 3cm x 3cm/1.73'' x 1.18'' x 1.18'' (Approx.) Package Includes: 1 x Digital Cooking Probe Thermometer(1pc AG13 Battery Included)

Civil Lab Technician Course in Jahangir, Multan 03354176949, New session of course will be started soon in international college of technical education. Admission are open in international college of technical education for both boys and girls 923115193625. International college of technical offers Management courses, Technical courses, Safety courses and different type of courses and diplomas . All the courses and diplomas offered by international college of technical education is acceptable in whole world. civil lab technician is a professional engineering discipline that deals with the design, construction, and maintenance of the physical and naturally built environment, including works like roads, bridges, canals, dams, and buildings. An engineering technician is primarily trained in the skills and techniques related to a specific branch of engineering, with a practical understanding and has general fundamental engineering concepts. Engineering technicians often assist engineers and technologists in projects and research and development. An engineering technician sits between a skilled craft worker and a Technologist. Engineers apply techniques of engineering analysis in testing, production, or maintenance. Analytical engineers may supervise production in factories and elsewhere, determine the causes of a process failure, and test output to maintain quality. They also estimate the time and cost required to complete projects. Supervisory engineers are responsible for major components or entire projects. Engineering analysis involves the application of scientific analytic principles and processes to reveal the properties and state of the system, device or mechanism under study. Engineering analysis proceeds by separating the engineering design into the mechanisms of operation or failure, analyzing or estimating each component of the operation or failure mechanism in isolation, and recombining the components. An engineering technologist is a specialist dedicated to the development, design, and implementation of engineering and technology. Engineering technology education is more of a broad specialized and applied engineering education. Engineering Technologists often work under traditional engineers. However the Engineering Technologist Mobility Forum indicates that an engineering technologist's work should have required the exercise of independent engineering judgment for manufacturing firms, product improvement, design and construction, and government agencies applying engineering principles and technical skills. Engineering technologists also may assume senior management positions in industry or become entrepreneurs. civil lab technician is a professional engineering discipline that deals with the design, construction, and maintenance of the physical and naturally built environment, including works like roads, bridges, canals, dams, and buildings. civil lab technician is traditionally broken into a number of sub-disciplines. It is the second-oldest engineering discipline after military engineering, and it is defined to distinguish non-military engineering from military engineering. civil lab technician takes place in the public sector from municipal through to national governments, and in the private sector from individual homeowners through to international companies. Conducts tests of construction materials, prepares sketches and tabulations, and assists in estimating costs in support of civil engineering professionals and engineering technologists. Performing or assisting with field and laboratory tests of soils and construction materials. Providing technical assistance connected with the construction of buildings and other structures, and with surveys or the preparation of survey reports. Ensuring compliance with design specifications, relevant legislation and regulations, and maintenance of desired standards of materials and work. Applying technical knowledge of building and civil engineering principles and practices in order to identify and solve problems arising. Assisting with the preparation of detailed estimates of quantities and costs of materials and labour required for projects, according to the specifications given. Inspecting buildings and structures during and after construction to ensure that they comply with building, grading, zoning and safety laws and approved plans, specifications and standards, as well as with other rules concerning quality and safety. Advising on the installation of fire detectors and sprinkler systems and the use of materials in the construction of buildings and means of transportation to reduce risk of fire and extent of damage and danger if fire occurs. Inspire Institute of Technologies Pakistan (Pvt-Ltd) registered with National Training Bureau and various other prominent technical boards is a common route into this career. Civil Lab Technician Course in Rawalpindi, Islamabad, Lahore, Karachi, Gilgit, Skardu, Ghangche, taxila, Shigar, Astore, Diamer, Ghizer, Kharmang, Gultari, Rondo, Hunza Nagar, Gupi, Azad Jammu and Kashmir, Muzaffarabad, Mirpur, Bhimber, Kotli, Rawlakot, Bagh, Bahawalpur, Bhakkar, Chakwal, Chiniot, Dera Ghazi Khan, Faisalabad, Gujranwala, Gujrat, Hafizabad, Jhang, Jhelum, Kasur, Khanewal, Khushab, Layyah, Lodharan, Mandi-Bahuddin, Mianwali, Multan, Muzaffargarh, Nankana Sahib, Narowal, Okara, Pakpattan, Rahim Yar Khan, Rajanpur, Sahiwal, Sargodha, Sheikhupura, Sialkot, Toba tek Singh, Vehari, Attock, Taxila, Wah Cantt, Rawalpindi, Balochistan, Khyber-Pakhtunkhwa, Punjab, Sindh, Gilgit Baltistan, Turbat, Sibi, Chaman, Lasbela, Zhob, Gwadar, Nasiraba, Jaffarabad, Hub, Dera Murad Jamali, Dera Allah Yar, Khyber-Pakhtunkhwa, Peshawar, Mardan, Abbottabad, Mingor, Kohat, Bannu, Swabi, Dera Ismail Khan, Charsadda, Nowshera, Mansehra, Hyderabad, Sukkur, Larkana, Nawabshah, Nanak wara, Mirpur Khas, Jacobabad, Shikarpur, Khairpur, Pakistan. for further detail of all courses Visit our website www.icollegete.com www.courses.com.pk