-
loading
Ads with pictures

Introduction health safety work


Top sales list introduction health safety work

Rawalpindi (Punjab)
Whatsapp: +923035530865, 03219606785, 3315145601,03495021336 IPATS Government Recognized Education Zone-Khanna Pul Rawalpindi-Islamabad Health & Safety Courses IOSH OSHA Courses COURSES Safety Officer HSE Engineer Safety Supervisor Hazard Identification Working at Heights Confined Space Hot works Permit to Work Ergonomics and Injury Prevention Fire Radiation Electrical Safety Scaffolding Environment & Waste Management Management of Hazardous Substance & Dangerous goods. Lifting & Rigging Fitness to work Control of work Communication & staff Consultation Noise management Whatsapp: +923035530865, 03219606785, 3315145601,03495021336 IPATS Government Recognized Education Zone-Khanna Pul Rawalpindi-Islamabad Views: 7
See product
Karachi (Sindh)
Qualification Overview: The Level 2 Award in Health and Safety in the Workplace is aimed at all employees. It is intended for learners already in workplaces and those who are preparing to start or return to work. It is also very useful for young person’s to raise their ability to identify and understand hazards when preparing for work experience and into employment. Persons gaining this qualification will know that health and safety is the responsibility of everyone within a business, its contractors, visitors and suppliers. Its subject areas are regarded by the Health and Safety Executive as being important to maintaining safe working procedures in the workplace. Key Points: Registration deadline: 10-SEP- Course date: 16-SEP- Course duration: 1 day Course timings: am to pm Course fee: Rs. PKR. Certification: HABC UK Venue: Karachi Special Fee Discount 25%
See product
Faisalabad (Punjab)
IPED- institute of professional education & development office#252, 2nd floor Umair plaza, 6th Road Rawalpindi Islamabad www.ipedpak.com www.ipedpk.com Safety officer course World Wide Acceptable with UK/USA/Pak/U.A.E International Certifications in Rawalpindi|Islamabad|Pakistan Islamabad, Rawalpindi,Lahore,Multan,Sahiwal,Karachi,Sialkot,Shakargar,Sawabi, Quetta,Pishwar,Sakhar,Faislabad,Fatta,Sargodha,Dena,Jehlum, Iped Institute,accredited with ENGLAND/USA/AUSTRALIA/UAE/TTB/SDC diploma/certificate courses, Best field experienced trainers also cheap & very smart feeses with hostals facility for best students in all over the world.Safety officer course World Wide Acceptable with UK/USA/Pak/U.A.E International Certifications.Safety/HSE/IOSH/OSH Courses,safety Supervisior/Safety Inspector/Technicians.Very Low fees.Fire safety Oil and Gas Safety courses in Rawalpindi|Islamabad|Pakistan Safety Officer Course|safety officer Training course|Safety Courses in Rawalpindi|Islamabad|Pakistan Construction Safety Environmetal Safety Fire Safety Oil & Gas Safety Safety Management System Electrical Safety Course Content Safety Officer Diploma Modules 1 Principal Legal Requirements Health And safety Management Reporting, Recording, and Investigation of Injuries ,Disease and Dangerous Occurrences Principles of Accident Prevention Human Factors. Ergonomic Stress at Work Occupational Diseases and Conditions First Aid Modules 2 Dangerous Substances Engineering safety Fire prevention Electrical Safety Structural Safety Construction and Contractors mechanical Handling The Working Environment Safety in Office, Workshops and in Catering Operations Course Duration One Year Program 3 Months Class 5 Days a Weeks Class Timing Evening & Morning Shift
Rs 25.000
See product
Islamabad (Islamabad Capital Territory)
Whatsapp: +923035530865, 03219606785,3315145601, 03495021336 IPATS Government Recognized Education Zone-Khanna Pul Rawalpindi-Islamabad 9. HABC Level 4 Award in Health & Safety in the Workplace 1. Understand the duties and responsibilities of employers, employees and others in relation to health and safety at work ? 1 Outline the way in which health and safety law is applied in the United Kingdom. ? 2 Explain the duties and responsibilities of employers, employees and others in relation health and safety at work ? 3 Explain the potential cost and effects of poor health and safety standards. ? 4 Explain the role of training, maintenance and workplace layout in reducing risks. ? 2. Understand the process by which health and safety is managed in an organisation ? 1 Explain the role of health and safety polices in managing health and safety ? 2 Explain methods to ensure employers and employees communicate and co-operate on health and safety issues effectively ? 3 Explain the role of risk assessments and safe systems of work in the management of health and safety. ? 4 Describe management and audit processes and documentation used to maintain and improve health and safety standards. ? 5 Outline sources of information and instructions on health and safety and where they are found. 3. Understand procedures for developing and implementing risk assessment ? 1 Outline procedure for the development, implementation and recording of risk assessments. ? 2 Construct risk assessments for a range of tasks and procedures, such as manufacturing/construction tasks, substances hazardous to health, general hazards of the working environment. 4. Understand procedures for developing and implementing safe systems of work ? 1 Outline procedure for the development, implementation and recording of safe systems of work. ? 2 Construct a safe system of work for a range of tasks and procedures, such as manufacturing/construction tasks, substances hazardous to health, general hazards of the working environment. 5. Know how to review health and safety across an organization ? 1 Explain procedures for reviewing an organization’s practices and policy with regards to health and safety at work. ? 2 Explain the principles of incident investigation ? 3 State how changes can be implemented following a review of risk assessments, safe systems of work and incidents. Whatsapp: +923035530865, 03219606785,3315145601, 03495021336 IPATS Government Recognized Education Zone-Khanna Pul Rawalpindi-Islamabad Views: 2
See product
Islamabad (Islamabad Capital Territory)
Whatsapp: +923035530865, 03219606785,3315145601, 03495021336 IPATS Government Recognized Education Zone-Khanna Pul Rawalpindi-Islamabad 9. HABC Level 4 Award in Health & Safety in the Workplace 1. Understand the duties and responsibilities of employers, employees and others in relation to health and safety at work ? 1 Outline the way in which health and safety law is applied in the United Kingdom. ? 2 Explain the duties and responsibilities of employers, employees and others in relation health and safety at work ? 3 Explain the potential cost and effects of poor health and safety standards. ? 4 Explain the role of training, maintenance and workplace layout in reducing risks. ? 2. Understand the process by which health and safety is managed in an organisation ? 1 Explain the role of health and safety polices in managing health and safety ? 2 Explain methods to ensure employers and employees communicate and co-operate on health and safety issues effectively ? 3 Explain the role of risk assessments and safe systems of work in the management of health and safety. ? 4 Describe management and audit processes and documentation used to maintain and improve health and safety standards. ? 5 Outline sources of information and instructions on health and safety and where they are found. 3. Understand procedures for developing and implementing risk assessment ? 1 Outline procedure for the development, implementation and recording of risk assessments. ? 2 Construct risk assessments for a range of tasks and procedures, such as manufacturing/construction tasks, substances hazardous to health, general hazards of the working environment. 4. Understand procedures for developing and implementing safe systems of work ? 1 Outline procedure for the development, implementation and recording of safe systems of work. ? 2 Construct a safe system of work for a range of tasks and procedures, such as manufacturing/construction tasks, substances hazardous to health, general hazards of the working environment. 5. Know how to review health and safety across an organization ? 1 Explain procedures for reviewing an organization’s practices and policy with regards to health and safety at work. ? 2 Explain the principles of incident investigation ? 3 State how changes can be implemented following a review of risk assessments, safe systems of work and incidents. Whatsapp: +923035530865, 03219606785,3315145601, 03495021336 IPATS Government Recognized Education Zone-Khanna Pul Rawalpindi-Islamabad Views: 208
See product
Rawalpindi (Punjab)
Whatsapp: +923035530865, 03219606785,3315145601, 03495021336 IPATS Government Recognized Education Zone-Khanna Pul Rawalpindi-Islamabad 9. HABC Level 4 Award in Health & Safety in the Workplace 1. Understand the duties and responsibilities of employers, employees and others in relation to health and safety at work ? 1 Outline the way in which health and safety law is applied in the United Kingdom. ? 2 Explain the duties and responsibilities of employers, employees and others in relation health and safety at work ? 3 Explain the potential cost and effects of poor health and safety standards. ? 4 Explain the role of training, maintenance and workplace layout in reducing risks. ? 2. Understand the process by which health and safety is managed in an organisation ? 1 Explain the role of health and safety polices in managing health and safety ? 2 Explain methods to ensure employers and employees communicate and co-operate on health and safety issues effectively ? 3 Explain the role of risk assessments and safe systems of work in the management of health and safety. ? 4 Describe management and audit processes and documentation used to maintain and improve health and safety standards. ? 5 Outline sources of information and instructions on health and safety and where they are found. 3. Understand procedures for developing and implementing risk assessment ? 1 Outline procedure for the development, implementation and recording of risk assessments. ? 2 Construct risk assessments for a range of tasks and procedures, such as manufacturing/construction tasks, substances hazardous to health, general hazards of the working environment. 4. Understand procedures for developing and implementing safe systems of work ? 1 Outline procedure for the development, implementation and recording of safe systems of work. ? 2 Construct a safe system of work for a range of tasks and procedures, such as manufacturing/construction tasks, substances hazardous to health, general hazards of the working environment. 5. Know how to review health and safety across an organization ? 1 Explain procedures for reviewing an organization’s practices and policy with regards to health and safety at work. ? 2 Explain the principles of incident investigation ? 3 State how changes can be implemented following a review of risk assessments, safe systems of work and incidents. Whatsapp: +923035530865, 03219606785,3315145601, 03495021336 IPATS Government Recognized Education Zone-Khanna Pul Rawalpindi-Islamabad Views: 361
See product
Pakistan (All cities)
OTHM Level 6 Diploma in Occupational Health & Safety in Islamabad, Rawalpindi, Karachi, Peshawar, Lahore and Pakistan O3165643400, O3119903317 The objective of the OTHM Level 6 Diploma in Health and Social Care Management qualification is to equip learners with the underpinning knowledge, understanding and skills required for a career in the health and social care sector at a managerial level. The programme enables learners to demonstrate their skills by producing evidence from their work activities, to meet national occupational standards. Learners will acquire care management skills in the Health and Social Care sector. OTHM qualifications at RQF Level 6 represent practical knowledge, skills, capabilities and competences that are assessed in academic terms as being equivalent to Bachelor’s Degrees with Honours, Bachelor’s Degrees, Professional Graduate Certificate in Education (PGCE), Graduate Diplomas and Graduate Certificates. The Diploma in Occupational Health and Safety Management – Level 6 (Accredited by Eduqual, UK) is a qualification for aspiring health and safety professionals. It is aimed at learners who are responsible for developing and applying health and safety procedures day-to-day in an organisation. They are likely to be managers looking to improve their knowledge and skills. Qualifications Our qualifications are made up of the Regulated Qualification Framework (RQF) rules which provides flexible ways to get a qualification. Qualifications at the same level are a similar level of difficulty, but the size and content of the qualifications can vary. The Level 4, 5 and 6 diploma qualifications are equivalent to Year 1, 2 and 3 (Final year) respectively of a three-year UK Bachelor’s degree. Each level consists of 120 credits. Completing any of the level 4, 5 and 6 qualifications will enable learners a progression to the next level of higher education at UK universities. The Level 6 qualifications in Clinical Aesthetic Injectable Therapies are designed to enable learners / practitioners to provide the highest standards of patient and client care during all stages of delivering cosmetic / aesthetic injectable therapies. By achieving these qualifications, learners will acquire the knowledge, skills and competence to administer treatments safely and appropriately, adhering to the principles of ‘do no harm’ and promoting public health at all times. Registered healthcare professionals e.g. doctors, dentists, nurse prescribers, allied health professionals, independent pharmacist prescribers. In addition to formal identification documentation and previous qualification certificates, learners must produce evidence of registration with an appropriate professional body* e.g. GMC, GDC, NMC.HCPC Registered healthcare professionals from any group who do not hold prescribing rights must provide evidence of working under the clinical oversight of a professional who has regulated prescribing rights. *Learners may not be registered for either qualification if they have any conditions noted on their professional body (PRSB) registration. OTHM require centres to check applicants’ status with regards to PRSB registration prior to registration on the qualification and evidence of this retained for scrutiny by OTHM. Nurses and Allied-healthcare professionals (and those registered with the Health and Care Professions Council) who are not independent prescribers are subject to CPSA / JCCP requirements for working under the clinical oversight of an appropriate professional i.e. they must have access to, and support from, experienced clinicians who are able to deal with medical emergency situations and complications and, have independent prescribing rights. Applicants registered with non UK regulatory bodies Applicants who provide evidence of registration on non UK regulatory bodies e.g. The Medical Board of Australia; will have their registration confirmed and vetted on that register and their eligibility to practice in the UK must be confirmed through the appropriate professional register. If there is no evidence of registration, or conditions are noted on that registration, the applicant will not be eligible to register for the qualification. Non UK regulatory bodies must be nationally recognised to be considered a suitable register. Each application will be evaluated on a case by case or individual basis. English requirements: If a learner is not from a majority English-speaking country, they must provide evidence of English language competency. For more information visit English Language Expectations page in the OTHM website. Equivalences OTHM qualifications at RQF Level 7 represent practical knowledge, skills, capabilities and competences that are assessed in academic terms as being equivalent in level to Master’s Degrees, Integrated Master’s Degrees, Postgraduate Diplomas, Postgraduate Certificate in Education (PGCE) and Postgraduate Certificates. Overview Accounting and finance are at the very heart of business operations. From banking to manufacturing, from huge service industries to micro businesses, the ability to manage, plan and account for money is still the ultimate measure of business success and the key driver of growth. Many accountants occupy key managerial positions in business, yet few are qualified managers. In the increasingly complex modern business environment, there is a high demand for skilled professionals who can work flexibly in teams across business boundaries. The objective of the OTHM Level 6 Diploma in Accounting and Business qualification is to provide learners with the knowledge and skills required by a middle or senior manager in an organisation, and who may be involved in managing organisational finances, investment and risk, audit and assurance, or research. Entry requirements For entry onto the OTHM Level 6 Diploma in Accounting and Business qualification, learners must possess: Relevant NQF/QCF/RQF Level 5 diploma or equivalent recognised qualification Mature learners (over 21) with management experience (learners must check with the delivery centre regarding this experience prior to registering for the programme) Learner must be 18 years or older at the beginning of the course English requirements: If a learner is not from a majority English-speaking country must provide evidence of English language competency. For more information visit English Language Expectations page in this website Equivalences OTHM qualifications at RQF Level 6 represent practical knowledge, skills, capabilities and competences that are assessed in academic terms as being equivalent to Bachelor’s Degrees with Honors, Bachelor’s Degrees, Professional Graduate Certificate in Education (PGCE), Graduate Diplomas and Graduate Certificates. The level 6 Diploma in Occupational Health and Safety is a qualification for aspiring health and safety professionals. It is aimed at learners who are responsible for developing and applying health and safety procedures day-to-day in an organization. They are likely to be managers looking to improve their knowledge and skills. The Diploma is designed to provide learners with the expertise required to undertake a career as a health and safety practitioner and it also provides a sound basis for progression to postgraduate study. OTHM Level 6 Diploma in Occupational Health & safety in Islamabad, OTHM Level 6 Diploma in Occupational Health & safety in Rawalpindi, OTHM Level 6 Diploma in Occupational Health & safety in Gujranwala, OTHM Level 6 Diploma in Occupational Health & safety in Sialkot, OTHM Level 6 Diploma in Occupational Health & safety in Sargodha, OTHM Level 6 Diploma in Occupational Health & safety in Gujrat, OTHM Level 6 Diploma in Occupational Health & safety in Lahore, OTHM Level 6 Diploma in Occupational Health & safety in Faisalabad, OTHM Level 6 Diploma in Occupational Health & safety in Multan, OTHM Level 6 Diploma in Occupational Health & safety in Mandi Bahauddin, OTHM Level 6 Diploma in Occupational Health & safety in Bahawalpur, OTHM Level 6 Diploma in Occupational Health & safety in Attock, OTHM Level 6 Diploma in Occupational Health & safety in Chakwal, OTHM Level 6 Diploma in Occupational Health & safety in Mirpur, OTHM Level 6 Diploma in Occupational Health & safety in Bagh, OTHM Level 6 Diploma in Occupational Health & safety in Rawala kot, OTHM Level 6 Diploma in Occupational Health & safety in Kotli, OTHM Level 6 Diploma in Occupational Health & safety in Karachi, OTHM Level 6 Diploma in Occupational Health & safety in Hyderabad, OTHM Level 6 Diploma in Occupational Health & safety in Mardan, OTHM Level 6 Diploma in Occupational Health & safety in Peshawar, OTHM Level 6 Diploma in Occupational Health & safety in Swat, OTHM Level 6 Diploma in Occupational Health & safety in Rawat, OTHM Level 6 Diploma in Occupational Health & safety in Sawabi, OTHM Level 6 Diploma in Occupational Health & safety in Sahiwal, OTHM Level 6 Diploma in Occupational Health & safety in Sakkar, OTHM Level 6 Diploma in Occupational Health & safety in Haripur, OTHM Level 6 Diploma in Occupational Health & safety in Pakistan O3165643400, O3119903317,
See product

4 photos

Islamabad (Islamabad Capital Territory)
OTHM Level 6 Diploma in Occupational Health & safety in Islamabad, OTHM Level 6 Diploma in Occupational Health & safety in Rawalpindi, OTHM Level 6 Diploma in Occupational Health & safety in Gujranwala, OTHM Level 6 Diploma in Occupational Health & safety in Sialkot, OTHM Level 6 Diploma in Occupational Health & safety in Sargodha, OTHM Level 6 Diploma in Occupational Health & safety in Gujrat, OTHM Level 6 Diploma in Occupational Health & safety in Lahore, OTHM Level 6 Diploma in Occupational Health & safety in Faisalabad, OTHM Level 6 Diploma in Occupational Health & safety in Multan, OTHM Level 6 Diploma in Occupational Health & safety in Mandi Bahauddin, OTHM Level 6 Diploma in Occupational Health & safety in Bahawalpur, OTHM Level 6 Diploma in Occupational Health & safety in Attock, OTHM Level 6 Diploma in Occupational Health & safety in Chakwal, OTHM Level 6 Diploma in Occupational Health & safety in Mirpur, OTHM Level 6 Diploma in Occupational Health & safety in Bagh, OTHM Level 6 Diploma in Occupational Health & safety in Rawala kot, OTHM Level 6 Diploma in Occupational Health & safety in Kotli, OTHM Level 6 Diploma in Occupational Health & safety in Karachi, OTHM Level 6 Diploma in Occupational Health & safety in Hyderabad, OTHM Level 6 Diploma in Occupational Health & safety in Mardan, OTHM Level 6 Diploma in Occupational Health & safety in Peshawar, OTHM Level 6 Diploma in Occupational Health & safety in Swat, OTHM Level 6 Diploma in Occupational Health & safety in Rawat, OTHM Level 6 Diploma in Occupational Health & safety in Sawabi, OTHM Level 6 Diploma in Occupational Health & safety in Sahiwal, OTHM Level 6 Diploma in Occupational Health & safety in Sakkar, OTHM Level 6 Diploma in Occupational Health & safety in Haripur, OTHM Level 6 Diploma in Occupational Health & safety in Pakistan O3165643400, O3119903317,OTHM Level 6 Diploma in Occupational Health & Safety in Islamabad, Rawalpindi, Karachi, Peshawar, Lahore and Pakistan O3165643400, O3119903317 The objective of the OTHM Level 6 Diploma in Health and Social Care Management qualification is to equip learners with the underpinning knowledge, understanding and skills required for a career in the health and social care sector at a managerial level. The programme enables learners to demonstrate their skills by producing evidence from their work activities, to meet national occupational standards. Learners will acquire care management skills in the Health and Social Care sector. OTHM qualifications at RQF Level 6 represent practical knowledge, skills, capabilities and competences that are assessed in academic terms as being equivalent to Bachelor’s Degrees with Honours, Bachelor’s Degrees, Professional Graduate Certificate in Education (PGCE), Graduate Diplomas and Graduate Certificates. The Diploma in Occupational Health and Safety Management – Level 6 (Accredited by Eduqual, UK) is a qualification for aspiring health and safety professionals. It is aimed at learners who are responsible for developing and applying health and safety procedures day-to-day in an organisation. They are likely to be managers looking to improve their knowledge and skills. Qualifications Our qualifications are made up of the Regulated Qualification Framework (RQF) rules which provides flexible ways to get a qualification. Qualifications at the same level are a similar level of difficulty, but the size and content of the qualifications can vary. The Level 4, 5 and 6 diploma qualifications are equivalent to Year 1, 2 and 3 (Final year) respectively of a three-year UK Bachelor’s degree. Each level consists of 120 credits. Completing any of the level 4, 5 and 6 qualifications will enable learners a progression to the next level of higher education at UK universities. The Level 6 qualifications in Clinical Aesthetic Injectable Therapies are designed to enable learners / practitioners to provide the highest standards of patient and client care during all stages of delivering cosmetic / aesthetic injectable therapies. By achieving these qualifications, learners will acquire the knowledge, skills and competence to administer treatments safely and appropriately, adhering to the principles of ‘do no harm’ and promoting public health at all times. Registered healthcare professionals e.g. doctors, dentists, nurse prescribers, allied health professionals, independent pharmacist prescribers. In addition to formal identification documentation and previous qualification certificates, learners must produce evidence of registration with an appropriate professional body* e.g. GMC, GDC, NMC.HCPC Registered healthcare professionals from any group who do not hold prescribing rights must provide evidence of working under the clinical oversight of a professional who has regulated prescribing rights. *Learners may not be registered for either qualification if they have any conditions noted on their professional body (PRSB) registration. OTHM require centres to check applicants’ status with regards to PRSB registration prior to registration on the qualification and evidence of this retained for scrutiny by OTHM. Nurses and Allied-healthcare professionals (and those registered with the Health and Care Professions Council) who are not independent prescribers are subject to CPSA / JCCP requirements for working under the clinical oversight of an appropriate professional i.e. they must have access to, and support from, experienced clinicians who are able to deal with medical emergency situations and complications and, have independent prescribing rights. Applicants registered with non UK regulatory bodies Applicants who provide evidence of registration on non UK regulatory bodies e.g. The Medical Board of Australia; will have their registration confirmed and vetted on that register and their eligibility to practice in the UK must be confirmed through the appropriate professional register. If there is no evidence of registration, or conditions are noted on that registration, the applicant will not be eligible to register for the qualification. Non UK regulatory bodies must be nationally recognised to be considered a suitable register. Each application will be evaluated on a case by case or individual basis. English requirements: If a learner is not from a majority English-speaking country, they must provide evidence of English language competency. For more information visit English Language Expectations page in the OTHM website. Equivalences OTHM qualifications at RQF Level 7 represent practical knowledge, skills, capabilities and competences that are assessed in academic terms as being equivalent in level to Master’s Degrees, Integrated Master’s Degrees, Postgraduate Diplomas, Postgraduate Certificate in Education (PGCE) and Postgraduate Certificates. Overview Accounting and finance are at the very heart of business operations. From banking to manufacturing, from huge service industries to micro businesses, the ability to manage, plan and account for money is still the ultimate measure of business success and the key driver of growth. Many accountants occupy key managerial positions in business, yet few are qualified managers. In the increasingly complex modern business environment, there is a high demand for skilled professionals who can work flexibly in teams across business boundaries. The objective of the OTHM Level 6 Diploma in Accounting and Business qualification is to provide learners with the knowledge and skills required by a middle or senior manager in an organisation, and who may be involved in managing organisational finances, investment and risk, audit and assurance, or research. Entry requirements For entry onto the OTHM Level 6 Diploma in Accounting and Business qualification, learners must possess: Relevant NQF/QCF/RQF Level 5 diploma or equivalent recognised qualification Mature learners (over 21) with management experience (learners must check with the delivery centre regarding this experience prior to registering for the programme) Learner must be 18 years or older at the beginning of the course English requirements: If a learner is not from a majority English-speaking country must provide evidence of English language competency. For more information visit English Language Expectations page in this website Equivalences OTHM qualifications at RQF Level 6 represent practical knowledge, skills, capabilities and competences that are assessed in academic terms as being equivalent to Bachelor’s Degrees with Honors, Bachelor’s Degrees, Professional Graduate Certificate in Education (PGCE), Graduate Diplomas and Graduate Certificates. The level 6 Diploma in Occupational Health and Safety is a qualification for aspiring health and safety professionals. It is aimed at learners who are responsible for developing and applying health and safety procedures day-to-day in an organization. They are likely to be managers looking to improve their knowledge and skills. The Diploma is designed to provide learners with the expertise required to undertake a career as a health and safety practitioner and it also provides a sound basis for progression to postgraduate study.
See product

4 photos

Rawalpindi (Punjab)
OTHM Level 6 Diploma in Occupational Health & safety in Islamabad, OTHM Level 6 Diploma in Occupational Health & safety in Rawalpindi, OTHM Level 6 Diploma in Occupational Health & safety in Gujranwala, OTHM Level 6 Diploma in Occupational Health & safety in Sialkot, OTHM Level 6 Diploma in Occupational Health & safety in Sargodha, OTHM Level 6 Diploma in Occupational Health & safety in Gujrat, OTHM Level 6 Diploma in Occupational Health & safety in Lahore, OTHM Level 6 Diploma in Occupational Health & safety in Faisalabad, OTHM Level 6 Diploma in Occupational Health & safety in Multan, OTHM Level 6 Diploma in Occupational Health & safety in Mandi Bahauddin, OTHM Level 6 Diploma in Occupational Health & safety in Bahawalpur, OTHM Level 6 Diploma in Occupational Health & safety in Attock, OTHM Level 6 Diploma in Occupational Health & safety in Chakwal, OTHM Level 6 Diploma in Occupational Health & safety in Mirpur, OTHM Level 6 Diploma in Occupational Health & safety in Bagh, OTHM Level 6 Diploma in Occupational Health & safety in Rawala kot, OTHM Level 6 Diploma in Occupational Health & safety in Kotli, OTHM Level 6 Diploma in Occupational Health & safety in Karachi, OTHM Level 6 Diploma in Occupational Health & safety in Hyderabad, OTHM Level 6 Diploma in Occupational Health & safety in Mardan, OTHM Level 6 Diploma in Occupational Health & safety in Peshawar, OTHM Level 6 Diploma in Occupational Health & safety in Swat, OTHM Level 6 Diploma in Occupational Health & safety in Rawat, OTHM Level 6 Diploma in Occupational Health & safety in Sawabi, OTHM Level 6 Diploma in Occupational Health & safety in Sahiwal, OTHM Level 6 Diploma in Occupational Health & safety in Sakkar, OTHM Level 6 Diploma in Occupational Health & safety in Haripur, OTHM Level 6 Diploma in Occupational Health & safety in Pakistan O3165643400, O3119903317,OTHM Level 6 Diploma in Occupational Health & Safety in Islamabad, Rawalpindi, Karachi, Peshawar, Lahore and Pakistan O3165643400, O3119903317OTHM qualifications at RQF Level 6 represent practical knowledge, skills, capabilities and competences that are assessed in academic terms as being equivalent to Bachelor’s Degrees with Honours, Bachelor’s Degrees, Professional Graduate Certificate in Education (PGCE), Graduate Diplomas and Graduate Certificates. The Diploma in Occupational Health and Safety Management – Level 6 (Accredited by Eduqual, UK) is a qualification for aspiring health and safety professionals. It is aimed at learners who are responsible for developing and applying health and safety procedures day-to-day in an organisation. They are likely to be managers looking to improve their knowledge and skills. Qualifications Our qualifications are made up of the Regulated Qualification Framework (RQF) rules which provides flexible ways to get a qualification. Qualifications at the same level are a similar level of difficulty, but the size and content of the qualifications can vary. The Level 4, 5 and 6 diploma qualifications are equivalent to Year 1, 2 and 3 (Final year) respectively of a three-year UK Bachelor’s degree. Each level consists of 120 credits. Completing any of the level 4, 5 and 6 qualifications will enable learners a progression to the next level of higher education at UK universities. The Level 6 qualifications in Clinical Aesthetic Injectable Therapies are designed to enable learners / practitioners to provide the highest standards of patient and client care during all stages of delivering cosmetic / aesthetic injectable therapies. By achieving these qualifications, learners will acquire the knowledge, skills and competence to administer treatments safely and appropriately, adhering to the principles of ‘do no harm’ and promoting public health at all times. Registered healthcare professionals e.g. doctors, dentists, nurse prescribers, allied health professionals, independent pharmacist prescribers. In addition to formal identification documentation and previous qualification certificates, learners must produce evidence of registration with an appropriate professional body* e.g. GMC, GDC, NMC.HCPC Registered healthcare professionals from any group who do not hold prescribing rights must provide evidence of working under the clinical oversight of a professional who has regulated prescribing rights. *Learners may not be registered for either qualification if they have any conditions noted on their professional body (PRSB) registration. OTHM require centres to check applicants’ status with regards to PRSB registration prior to registration on the qualification and evidence of this retained for scrutiny by OTHM. Nurses and Allied-healthcare professionals (and those registered with the Health and Care Professions Council) who are not independent prescribers are subject to CPSA / JCCP requirements for working under the clinical oversight of an appropriate professional i.e. they must have access to, and support from, experienced clinicians who are able to deal with medical emergency situations and complications and, have independent prescribing rights. Applicants registered with non UK regulatory bodies Applicants who provide evidence of registration on non UK regulatory bodies e.g. The Medical Board of Australia; will have their registration confirmed and vetted on that register and their eligibility to practice in the UK must be confirmed through the appropriate professional register. If there is no evidence of registration, or conditions are noted on that registration, the applicant will not be eligible to register for the qualification. Non UK regulatory bodies must be nationally recognised to be considered a suitable register. Each application will be evaluated on a case by case or individual basis. English requirements: If a learner is not from a majority English-speaking country, they must provide evidence of English language competency. For more information visit English Language Expectations page in the OTHM website. Equivalences OTHM qualifications at RQF Level 7 represent practical knowledge, skills, capabilities and competences that are assessed in academic terms as being equivalent in level to Master’s Degrees, Integrated Master’s Degrees, Postgraduate Diplomas, Postgraduate Certificate in Education (PGCE) and Postgraduate Certificates. Overview Accounting and finance are at the very heart of business operations. From banking to manufacturing, from huge service industries to micro businesses, the ability to manage, plan and account for money is still the ultimate measure of business success and the key driver of growth. Many accountants occupy key managerial positions in business, yet few are qualified managers. In the increasingly complex modern business environment, there is a high demand for skilled professionals who can work flexibly in teams across business boundaries. The objective of the OTHM Level 6 Diploma in Accounting and Business qualification is to provide learners with the knowledge and skills required by a middle or senior manager in an organisation, and who may be involved in managing organisational finances, investment and risk, audit and assurance, or research. Entry requirements For entry onto the OTHM Level 6 Diploma in Accounting and Business qualification, learners must possess: Relevant NQF/QCF/RQF Level 5 diploma or equivalent recognised qualification Mature learners (over 21) with management experience (learners must check with the delivery centre regarding this experience prior to registering for the programme) Learner must be 18 years or older at the beginning of the course English requirements: If a learner is not from a majority English-speaking country must provide evidence of English language competency. For more information visit English Language Expectations page in this website Equivalences OTHM qualifications at RQF Level 6 represent practical knowledge, skills, capabilities and competences that are assessed in academic terms as being equivalent to Bachelor’s Degrees with Honors, Bachelor’s Degrees, Professional Graduate Certificate in Education (PGCE), Graduate Diplomas and Graduate Certificates. The level 6 Diploma in Occupational Health and Safety is a qualification for aspiring health and safety professionals. It is aimed at learners who are responsible for developing and applying health and safety procedures day-to-day in an organization. They are likely to be managers looking to improve their knowledge and skills. The Diploma is designed to provide learners with the expertise required to undertake a career as a health and safety practitioner and it also provides a sound basis for progression to postgraduate study.
Rs 260.000
See product

4 photos

Karachi (Sindh)
OTHM Level 6 Diploma in Occupational Health & Safety in Islamabad, Rawalpindi, Karachi, Peshawar, Lahore and Pakistan O3165643400, O3119903317Qualifications Our qualifications are made up of the Regulated Qualification Framework (RQF) rules which provides flexible ways to get a qualification. Qualifications at the same level are a similar level of difficulty, but the size and content of the qualifications can vary. The Level 4, 5 and 6 diploma qualifications are equivalent to Year 1, 2 and 3 (Final year) respectively of a three-year UK Bachelor’s degree. Each level consists of 120 credits. Completing any of the level 4, 5 and 6 qualifications will enable learners a progression to the next level of higher education at UK universities. The Level 6 qualifications in Clinical Aesthetic Injectable Therapies are designed to enable learners / practitioners to provide the highest standards of patient and client care during all stages of delivering cosmetic / aesthetic injectable therapies. By achieving these qualifications, learners will acquire the knowledge, skills and competence to administer treatments safely and appropriately, adhering to the principles of ‘do no harm’ and promoting public health at all times. Registered healthcare professionals e.g. doctors, dentists, nurse prescribers, allied health professionals, independent pharmacist prescribers. In addition to formal identification documentation and previous qualification certificates, learners must produce evidence of registration with an appropriate professional body* e.g. GMC, GDC, NMC.HCPC Registered healthcare professionals from any group who do not hold prescribing rights must provide evidence of working under the clinical oversight of a professional who has regulated prescribing rights. *Learners may not be registered for either qualification if they have any conditions noted on their professional body (PRSB) registration. OTHM require centres to check applicants’ status with regards to PRSB registration prior to registration on the qualification and evidence of this retained for scrutiny by OTHM. Nurses and Allied-healthcare professionals (and those registered with the Health and Care Professions Council) who are not independent prescribers are subject to CPSA / JCCP requirements for working under the clinical oversight of an appropriate professional i.e. they must have access to, and support from, experienced clinicians who are able to deal with medical emergency situations and complications and, have independent prescribing rights. The objective of the OTHM Level 6 Diploma in Health and Social Care Management qualification is to equip learners with the underpinning knowledge, understanding and skills required for a career in the health and social care sector at a managerial level. The programme enables learners to demonstrate their skills by producing evidence from their work activities, to meet national occupational standards. Learners will acquire care management skills in the Health and Social Care sector. OTHM qualifications at RQF Level 6 represent practical knowledge, skills, capabilities and competences that are assessed in academic terms as being equivalent to Bachelor’s Degrees with Honours, Bachelor’s Degrees, Professional Graduate Certificate in Education (PGCE), Graduate Diplomas and Graduate Certificates. The Diploma in Occupational Health and Safety Management – Level 6 (Accredited by Eduqual, UK) is a qualification for aspiring health and safety professionals. It is aimed at learners who are responsible for developing and applying health and safety procedures day-to-day in an organisation. They are likely to be managers looking to improve their knowledge and skills.OTHM Level 6 Diploma in Occupational Health & safety in Islamabad, OTHM Level 6 Diploma in Occupational Health & safety in Rawalpindi, OTHM Level 6 Diploma in Occupational Health & safety in Gujranwala, OTHM Level 6 Diploma in Occupational Health & safety in Sialkot, OTHM Level 6 Diploma in Occupational Health & safety in Sargodha, OTHM Level 6 Diploma in Occupational Health & safety in Gujrat, OTHM Level 6 Diploma in Occupational Health & safety in Lahore, OTHM Level 6 Diploma in Occupational Health & safety in Faisalabad, OTHM Level 6 Diploma in Occupational Health & safety in Multan, OTHM Level 6 Diploma in Occupational Health & safety in Mandi Bahauddin, OTHM Level 6 Diploma in Occupational Health & safety in Bahawalpur, OTHM Level 6 Diploma in Occupational Health & safety in Attock, OTHM Level 6 Diploma in Occupational Health & safety in Chakwal, OTHM Level 6 Diploma in Occupational Health & safety in Mirpur, OTHM Level 6 Diploma in Occupational Health & safety in Bagh, OTHM Level 6 Diploma in Occupational Health & safety in Rawala kot, OTHM Level 6 Diploma in Occupational Health & safety in Kotli, OTHM Level 6 Diploma in Occupational Health & safety in Karachi, OTHM Level 6 Diploma in Occupational Health & safety in Hyderabad, OTHM Level 6 Diploma in Occupational Health & safety in Mardan, OTHM Level 6 Diploma in Occupational Health & safety in Peshawar, OTHM Level 6 Diploma in Occupational Health & safety in Swat, OTHM Level 6 Diploma in Occupational Health & safety in Rawat, OTHM Level 6 Diploma in Occupational Health & safety in Sawabi, OTHM Level 6 Diploma in Occupational Health & safety in Sahiwal, OTHM Level 6 Diploma in Occupational Health & safety in Sakkar, OTHM Level 6 Diploma in Occupational Health & safety in Haripur, OTHM Level 6 Diploma in Occupational Health & safety in Pakistan O3165643400, O3119903317,
See product

4 photos

Islamabad (Islamabad Capital Territory)
The NEBOSH International General Certificate in Occupational Health and Safety (IGC) provides a broad understanding of health & safety issues and is an essential qualification for anyone working in or wanting to work in safety & health anywhere in the world. Candidates are assessed with an Open Book (Home-Based) examination for the first 4 elements and a practical work-based risk assessment for the elements 5 to 11. The open book assessment will begin by giving you a scenario. The scenario may go on to outline a developing situation, such as an incident or safety intervention. We will specify the maximum marks available for each to help you manage your time. These tasks will partially or entirely draw on the sign posts and evidence within the scenario. Answers therefore need to be relevant to the scenario and, in some cases, specific evidence will be required to support answers. As there is an expectation of more detail and reflection, you will be given 24 hours to research and complete the examination. This is a challenge that really tests your ability to interpret the scenario before answering the questions set using the knowledge gained through your General Certificate studies. You will be able to complete the assessment at home wherever you are in the world. Dependent on the specific scenario.
Rs 110.000
See product
Islamabad (Islamabad Capital Territory)
Inspire Institute of Technologies (IIT Pakistan) Rawalpindi- Islamabad OSHA 30 Hour General Industry (USA), IOSH Managing Safely (UK), NEBOSH IGC (UK), Confined Space Entry, Contractor's Safety & Health Program, HAZMAT Health and Safety Leadership, Heat Stress Office Safety, Scaffolds User, Guidelines, Incident Investigation, Introduction to OSHA, Ergonomics in the workplace, OSHA Inspections, OSHA Recordkeeping, General Industry, Job Safety Analysis, Site Inspections, Accident Investigations, Seminars, Job Hazard Analysis, Safety Audits, Safety Manuals, Air Quality Management, Develop Emergency Response Plan, Emergency Response Team, Environmental Programs, Fire and Life Safety Systems, First Aid CPR, Forklift Safety Hot work permits, Industrial Hygiene Programs, Injury and Illness Prevention Program, ISO 14001, ISO 9001, Personal Protective Equipment, Risk Assessment, Safety Inspections, Safety Programs Note: All courses registration is open. . . Islamabad Campus:Office#26, 1st Floor Al-Hameed Plaza G-11 Markaz Islamabad Rawalpindi Campus: Office#215, 2nd floor Malikabad Plaza 6th road flyover main murree road Rawalpindi 0336-0547664 051-2362134 ************* ONLINE CLASSES AVAILABLE FOR ALL SAFETY COURSES. . . . . 03026346357 03235270770 03315999937 051-4853709 http://www.inspiretrainings.com.pk/
See product
Rawalpindi (Punjab)
Safety officer course in Rawalpindi 03335671497 Safety officer course in Rawalpindi 03335671497 Safety officer course in Rawalpindi 03335671497 Safety officer course in Rawalpindi 03335671497 Safety officer course in Rawalpindi 03335671497 HSE Safety Engineering Course The importance of good standards of health and safety in the modern work environment (HSE) cannot be over-emphasized. Employers are legally bound to appoint a competent person to advise them on their health and safety obligations. HSE management involves managing, controlling and handling all aspects of health, safety and the environment in the Petroleum, Construction, Mechanical industry, with the focus on major accident risk. Areas where considerable uncertainty about consequences may exist include, long-term health effects and effects on the natural environment.The companies must not only comply with the regulations but also reduce risk as far as possible. If insufficient knowledge is available about the effect of preventive action, the HSE regulations specify that additional measures must be adopted to avoid possible harmful impacts. Inspire Institute of Technologies Pakistan (Pvt) Ltd is affiliated with RCCI, SECP, SDA, TTB, TTPC, SDC & PSSC Government of Pakistan. HSE Engineering Course Outline: 1:Introduction to Occupational Health and safety 2:Advanced risk assessment and Management 3:Electrical Safety & Manual Handling 4:Work place safety 5:Mechanical and Ergonomic hazards 6:Waste management & Environmental pollution 7:Road safety 8:Fire protection Behavioral based safety 9:Incident investigation and root cause analysis Construction safety 10:Major diseases to be caused at work place 11:Industrial safety. 12:Contractors safety 13:Emergency response and preparedness. 14:Common industrial & work related hazards Class Timing Daily 2 Hours Course Duration: Six Months (Diploma TWO Years) FOR REGISTRATION Contact Us: 0331-5999937, 0333-5671497, 0321-5056755 SAFETY HSE ENGINEERING in Chakwal, SAFETY HSE ENGINEERING Course in Chakwal, SAFETY HSE ENGINEERING Safety Course in Chakwal, Safety HSE Engineering igc in Chakwal, Safety HSE Engineering oil and gas in Chakwal, Safety HSE Engineering hsw in Chakwal, Safety HSE Engineering itc in Chakwal, Safety HSE Engineering iog in Chakwal, Safety Officer Course in Chakwal, SAFETY HSE ENGINEERING in Rawalpindi, SAFETY HSE ENGINEERING Course in Rawalpindi, SAFETY HSE ENGINEERING Safety Course in Rawalpindi, Safety HSE Engineering igc in Rawalpindi, Safety HSE Engineering oil and gas in Rawalpindi, Safety HSE Engineering hsw in Rawalpindi, Safety HSE Engineering itc in Rawalpindi, Safety HSE Engineering iog in Rawalpindi, Safety Officer Course in Rawalpindi, SAFETY HSE ENGINEERING in Islamabad, SAFETY HSE ENGINEERING Course in Islamabad, SAFETY HSE ENGINEERING Safety Course in Islamabad, Safety HSE Engineering igc in Islamabad, Safety HSE Engineering oil and gas in Islamabad, Safety HSE Engineering hsw in Islamabad, Safety HSE Engineering itc in Islamabad, Safety HSE Engineering iog in Islamabad, Safety Officer Course in Islamabad. - See more at: http://iitpakistan.com.pk/safety-courses/hse-safety-engineering-course-diploma-pakistan-51.html#sthash.kht9qcxD.dpuf
See product
Rawalpindi (Punjab)
Safety Engineering Diploma Course in Rawalpindi 03335671497 Safety Engineering Diploma Course in Rawalpindi 03335671497 Safety Engineering Diploma Course in Rawalpindi 03335671497 HSE Engineering Course Course Outline Introduction to Occupational Health and safety Advanced risk assessment and Management Electrical Safety & Manual Handling Work place safety Mechanical and Ergonomic hazards Waste management & Environmental pollution Road safety Fire protection Behavioral based safety Incident investigation and root cause analysis Construction safety Major diseases to be caused at work place Industrial safety. Contractors safety Emergency response and preparedness. Common industrial & work related hazards Class Timing Daily 2 Hours Course Duration : Six Months (Diploma TWO Years) Total Fee: 50,000/-       For Admission Contact Us : +92 331 5999937 NEW Courses***: Starting for the 1st Time Level 6 Diploma in Occupational Health & Safety (BSC). Grad IOSH. IBOEHS (Oil & Gas Upstream Operation Safe Worker). USA. IBOEHS Registered Safety Officer. IBOEHS OSHA 30 Hrs. (General Safety-Construction Safety). IRCA ISO QMS 9001 Lead Auditor Course. IRCA ISO OHSAS 18001 Lead Auditor Course. ISO EMS 14001 Lead Auditor Course. Shorthand Course / English Shorthand/ Spoken English IELTS (International English Language Test System) Rigger Safety Course. GIS Arc 10.1, 3D Solid Works, IELTS, Shorthand. OSHA IOSH HSE Safety Officer Course in Rawalpindi. First time in Pakistan (Rawalpindi) Petroleum (Oil & Gas) Engineering Software Courses.Schlumberger Eclipse.Schlumberger Petrel. Kappa Ecrin. Geophysics Softwares. ***(Theory+Practical)*** Director's Message Image 02 Dear Students A technical institute is the vehicle that the youth rely on the most, to learn and advance knowledge. The vehicle we have built here is an enormously powerful one and has been highly productive over the past years. With the firm belief that the goal of true technical education is holistic development, the IITP-Pakistan ensures imparting values, ethics and confidence in young generation to harness their full potential, thereby creating social capital necessary for establishing a healthy society. In this great institute, our students are surrounded by astonishing resources -- fascinating fellow students from all over Pakistan, a learned and caring faculty, a well- stocked `library, superb notes facilities and extra-curricular opportunities covering every conceivable interest. They will have complete freedom to explore, learn about new subjects, meet new people and pursue new passions. I want to encourage our students, in every way that I can, to make the most of this rare and unique opportunity. The Management carries out directive, operational and evaluative functions by promoting participative culture and collective leadership. With a clear perception of the vision and mission, the INSPIRE Institute of Technologies Pakistan establishes itself as an ‘on the move’ organisation, aiming at excellence in every sphere of institutional life. It is the two key factors - inclusion and innovation - that have endowed us with the coveted status of Institute with Potential for Excellence and serve as a spur to achieve further higher academic standards. I welcome you to search the never ending arch of amalgamated knowledge, walk the untrodden path, seizing opportunities, never thought of as possible and be a beacon for generation to come . Best Wishes Asad Hussain Asdi TechIOSH. Director IIT-Pakistan. +92 331 5999937 Distance Learning Programs Download Admission Form Laptop Repairing Course. Mobile Repairing Course. UPS Repairing Course. CCTV Course. AC Technician Expert Course. Safety officer We Have Provided Course trainings in the field of HSE, Information Technology, Management, Engineering, Nebosh IGC, ITC, IOSH MS, Osha almost all cities of Pakistan. Azad Kashmir|OSHA IOSH HSE Safety Officer Course in Bagh|OSHA IOSH HSE Safety Officer Course in Bhimber|OSHA IOSH HSE Safety Officer Course in khuiratta|OSHA IOSH HSE Safety Officer Course in Kotli|Course in Mangla|OSHA IOSH HSE Safety Officer Course in Mirpur|OSHA IOSH HSE Safety Officer Course in Muzaffarabad|OSHA IOSH HSE Safety Officer Course in Plandri|OSHA IOSH HSE Safety Officer Course in Rawalakot|OSHA IOSH HSE Safety Officer Course in Punch|OSHA IOSH HSE Safety Officer Course in Balochistan|OSHA IOSH HSE Safety Officer Course in Amir Chah|OSHA IOSH HSE Safety Officer Course in Bazdar |Bela|Bellpat|OSHA IOSH HSE Safety Officer Course in Bagh|Burj|Chagai|Chah Sandan|Safety Officer Diploma in Chakku|Safety Officer Diploma in Chaman|OSHA IOSH HSE Safety Officer Course in Chhatr|Dalbandin|Dera Bugti|Dhana Sar|Diwana|Duki|Dushi|Duzab|Gajar|Gandava|Garhi Khairo|Garruck|Ghazluna|Girdan|Gulistan| Gwadar|Gwash|Hab Chauki|Hameedabad|Safety Officer Diploma in Harnai|Hinglaj|Hoshab|Ispikan|Jhal|Jhal Jhao|Safety Officer Diploma in Jhatpat|Safety Officer Diploma in Jiwani|Kalandi |Kalat|Kamararod|Kanak|Kandi|Kanpur|Safety Officer Diploma in Kapip|Kappar|Karodi|Katuri| Kharan| Khuzdar|Kikki|Kohan| Kohlu|OSHA IOSH HSE Safety Officer Course in Korak|OSHA IOSH HSE Safety Officer Course in Lahri|Lasbela|Liari|Loralai|Mach |Mand|Manguchar|Mashki Chah|Maslti|Mastung|Mekhtar|Merui|Mianez|Murgha Kibzai|Musa Khel Bazar|Nagha KalatNal|Naseerabad|Nauroz Kalat|Nur Gamma|Nushki|Nuttal|Ormara|Palantuk|Panjgur|Pasni|Piharak|Pishin|Qamruddin|Karez|Qila Abdullah|Qila Ladgasht|Qila Safed |OSHA IOSH HSE Safety Officer Course in Qila Saifullah|Safety Officer Diploma in Quetta |Safety Officer Diploma in Rakhni |Robat| Thana|Rodkhan|Safety Officer Diploma in Saindak|Sanjawi|Saruna|Shabaz Kalat|Shahpur|Sharam Jogizai|Shingar|Shorap|Sibi|Sonmiani|Spezand| Spintangi|Safety Officer Diploma in Sui|Suntsar| Surab|Thalo|Tump|OSHA IOSH HSE Safety Officer Course in Turbat| Umarao|pirMahal|Uthal|Vitakri|Wadh|Washap|Wasjuk|Yakmach |Zhob |Safety Officer Diploma in Federally Administered Northern Areas/FANa |Astor|Baramula|Hunza| Gilgit| Nagar|Skardu|Shangrila|Shandur |Federally Administered Tribal Areas/FATA|Bajaur|Hangu|Malakand|Safety Officer Diploma in Miran Shah|Mohmand|Khyber|Kurram|North Waziristan| South Waziristan|Wana|NWFP|Abbottabad|Ayubia|Adezai|Banda Daud Shah|Bannu|Batagram|Birote|Buner|Safety Officer Diploma in Chakdara|Charsadda|Chitral|Dargai|Darya Khan |OSHA IOSH HSE Safety Officer Course in Dera Ismail Khan| Drasan|Drosh|Hangu|Safety Officer Diploma in Haripur|Kalam|Safety Officer Diploma in Karak|Khanaspur|Kohat|Kohistan |Lakki Marwat|Latamber| Lower Dir|Madyan| Malakand|Mansehra|Nebosh IGC safety Course in Mardan|Mastuj|Mongora|Nowshera|Safety Officer Course Paharpur| Peshawar|Saidu Sharif|Shangla|Sakesar|Safety Officer Course in Swabi|Swat|Tangi|Tank|ThallTordher|Upper Dir|Punjab|Ahmedpur East |Safety Officer Diploma in Ahmed Nager Chatha|Safety Officer Course Ali Pur|Arifwala|Attock|Basti Malook|Bhagalchur|Safety Officer Course Bhalwal|Bahawalnagar|Safety Officer Diploma in Bahawalpur|Bhaipheru|Bhakkar|Burewala Chailianwala|Safety Officer Diploma in Chakwal|Chichawatni|Chiniot|Chowk Azam|Chowk Sarwar Shaheed|OSHA IOSH HSE Safety Officer Course in Daska|OSHA IOSH HSE Safety Officer Course in Darya Khan|Safety Officer Diploma in Dera Ghazi Khan|Derawar Fort|Dhaular|Safety Officer Diploma in Dina City|Dinga|Safety Officer Diploma in Dipalpur|Nebosh Safety Course in Faisalabad|Safety Officer Diploma in Fateh Jang|Gadar| Ghakhar Mandi|OSHA IOSH HSE Safety Officer Course in Gujranwala|Safety Officer Diploma in Gujrat|Safety Officer Diploma in Gujar Khan|Hafizabad|Haroonabad|Hasilpur| Haveli Lakha Jampur|Jhang|Safety Officer Diploma in Jhelum|Kalabagh|Karor Lal Esan|Safety Officer Diploma in Kasur|Safety Officer Diploma in Kamalia|Safety Officer Diploma in Kamokey|Khanewal|Khanpur|Kharian|Khushab|Kot Addu|Jahania|Safety Officer Diploma in Jalla Araain|Jauharabad|Laar|Safety Officer Diploma in Lahore|Lalamusa|Safety Officer Diploma in Layyah|Lodhran|Mamoori|Mandi|Bahauddin|Makhdoom Aali|Mandi Warburton| Mailsi| Mian Channu|Safety Officer Course in Minawala|Safety Officer Diploma in Mianwali|Safety Officer Diploma in Multan| Murree|Muridke|Safety Officer Diploma in Muzaffargarh|IOSH OSHA Course in Narowal| Okara| Renala Khurd|OSHA IOSH HSE Safety Officer Course in Rajan Pur|Pak Pattan|Panjgur|Pattoki| Pirmahal| Qila Didar Singh| Rabwah|Raiwind| Rajan Pur|Safety Officer Diploma in Rahim Yar Khan|Safety Officer Diploma in Rawalpindi|Rohri|Safety Officer Diploma in Sadiqabad|Safdar Abad – (Dhaban Singh)|Sahiwal|Sangla Hill|Samberial|Safety Officer Diploma in Sarai Alamgir|OSHA IOSH HSE Safety Officer Course in Sargodha|Shakargarh|Shafqat Shaheed Chowk| Sheikhupura|Nebosh IGC in Sialkot|Sohawa| Sooianwala| Sundar (city)|Safety Officer Diploma in Talagang|Safety Officer Diploma in Tarbela| Takhtbai|OSHA IOSH HSE Safety Officer Course in Taxila|Safety Officer Diploma in Toba Tek Singh||OSHA IOSH HSE Safety Officer Course in Vehari|OSHA IOSH HSE Safety Officer Course in Wah Cantonment| Wazirabad |Safety Officer Course in Sindh |Ali Bandar| Baden|Chachro|Dadu|Digri| |Diplo|OSHA IOSH HSE Safety Officer Course in Dokri| Gadra|Ghanian|Ghauspur| Ghotki| Hala| Hyderabad|OSHA IOSH HSE Safety Officer Course in Islamkot|Safety Officer Diploma in Jacobabad| Jamesabad|OSHA IOSH HSE Safety Officer Course in Jamshoro| Nebosh IGC safety course in Janghar| IOSH MS Safety Course in Jati (Mughalbhin)|Jhudo|Safety Officer Diploma in Jungshahi| Kandiaro|Safety Officer Diploma in Karachi| Kashmor| Keti Bandar |Khairpur |Khora |Klupro|Khokhropur| Korangi| Safety Officer Diploma in Kotri|OSHA IOSH HSE Safety Officer Course in Kot Sarae| Larkana| Lund| Mathi|Matiari| Mehar|Safety Officer Diploma in Mirpur Batoro |Safety Officer Diploma in Mirpur Khas |Safety Officer Diploma in Mirpur Sakro |Mithi| Mithani|Moro |Nagar Parkar|Naushara|Safety Officer Diploma in Naudero|Noushero Feroz |Nawabshah |Nazimabad| Naokot|Pendoo|Pokran| Qambar|Qazi Ahmad|Ranipur|Ratodero|Safety Officer Diploma in Rohri|Saidu Sharif|Sakrand|Safety Officer Diploma in Sanghar|Shadadkhot |Shahbandar| Shahdadpur| Shahpur Chakar|Nebosh Safety officer Course in Shikarpur| Sujawal | Level 6 Diploma in Occupational Health & Safety (BSC). Grad IOSH.| IBOEHS (Oil & Gas Upstream Operation Safe Worker). USA. | IBOEHS Registered Safety Officer.|IBOEHS OSHA 30 Hrs. (General Safety-Construction Safety).|IRCA ISO QMS 9001 Lead Auditor Course. IRCA ISO OHSAS 18001 Lead Auditor Course.ISO EMS 14001 Lead Auditor Course.Shorthand Course / English Shorthand/ Spoken English IELTS (International English Language Test System) | Rigger Safety Course. |Civil Engineering, Oil & Gas (Petroleum) Engineering, Mechanical Engineering, Civil Surveyor Courses, Quantity Surveyor Courses, Telecom Engineering, CCTV, Electrical Engineering, Environment Engineering, AC Courses. GIS|Hotel Management Courses, QC Courses, Human Resource Management (HRM), Safety Management, Building Management System BMS Courses, Logistics and Supply Chain Management, Hospital Management. |Hotel Management Courses, QC Courses, Human Resource Management (HRM), Safety Management, Building Management System BMS Courses, Logistics and Supply Chain Management, Hospital Management. Ms Office Computer Courses in Rawalpindi , Autocad 2D/3D ,3D Max, Web Development, CIT Courses, DIT, PGDIT, Peachtree Courses, Quick Books, Tally, CCNA, MCSE, Revit Courses, Primavera 3D Civil Courses. Rig Pass USA Course. | GIS Arc 10.1, 3D Solid Works, IELTS, Shorthand. |OSHA IOSH HSE Safety Officer Course in Rawalpindi. |Civil & Land Survey Course QS Quantity Surveyor QC QA TQM Quality Control Course in Sukkur| Tando Adam| Tando Allahyar|OSHA IOSH HSE Safety Officer Course in Tando Bago|OSHA IOSH HSE Safety Officer Course in Tar Ahamd Rind|OSHA IOSH HSE Safety Officer Course in Thatta| Tujal|Umarkot|Veirwaro|Warah..Inspire Institute of Technologies Pakistan. HEAD OFFICE ADDRESS: S-215, Second Floor, Malikabad Plaza, Near 6th Road Flyover, Main Murree Road, Rawalpindi, Pakistan. +92-51-4853709. +92-333-5671497.
See product
Rawalpindi (Punjab)
Safety officer Course in Islamabad 03315999937 Safety officer Course in Islamabad 03315999937 Safety officer Course in Islamabad 03315999937 Safety officer Course in Islamabad 03315999937 Safety (HSE) Officer Course ././/. Course Outline Health & Safety Management Health & Safety Policy Risk Assessment Controlling Risk Inspections Emergency Response Plan Oil & Gas Safety Fire Safety  Class Timing Daily 1 Hour Course Duration : Three Months (Diploma ONE Year) Total Fee: 25000/- HSE Engineering Course Course Outline Introduction to Occupational Health and safety Advanced risk assessment and Management Electrical Safety & Manual Handling Work place safety Mechanical and Ergonomic hazards Waste management & Environmental pollution Road safety Fire protection Behavioral based safety Incident investigation and root cause analysis Construction safety Major diseases to be caused at work place Industrial safety. Contractors safety Emergency response and preparedness. Common industrial & work related hazards Class Timing Daily 2 Hours Course Duration : Six Months (Diploma TWO Years) Total Fee: 50,000/- For Admission Contact Us : +92 331 5999937
See product

Free Classified ads - buy and sell cheap items in Pakistan | CLASF - copyright ©2024 www.clasf.pk.