Input audio

McIntosh Aw. Response kHz (+dB). Distortion 0.5%. Noise & hum -85dB. Output impedance , and 600 ohms. 600 ohm balanced to ground. 4, 8 and 16 ohms isolated from ground. Damping factor 12 for 4, 8 and 16 ohms. Input impedance 500k. Input sensitivity 0.5V. MECHANICAL: Gray hammertone chassis. Octal socket powers McIntosh C-8, C-4, C104, or C-108 preamps. Connector strip for 4, 8 and 16 ohms as well as 0.5V input. Audio input. TUBES: 2-6BG6 output, 12AX7, 12AU7,-12BH7, 5U4GA Condition: - No Warranty

Hello Friends, Audio Video Splitter Amplifier 1 In 8 Out 3 RCA AV Audio Video Splitter Amplifier COLOUR: Black Rs.3,500 Fixed 8 Port Video Audio AV 3RCA Switch Splitter Box enables 8 AV output devices to share 1 AV input. 1 set of audio & video input can be converted up to 8 sets of audio & video output. Adapter output standard: 9V 500MA. It can be used in your home, office, restaurant, shopping plaza, hotel, factory, etc, to show the one AV input on 8 different AV output devices like TV or other devices with standard AV (yellow-red-white) connector. CONTACT: Hussain Abbas ADDRESS: Shop No - F10/3, Opp Punjab Chowrangi, Near Dental Altamash Medical Institute, Clifton, Karachi NOTE: 1) Goods once sold will not be returned or changed. 2) Our rate fluctuates as it depends on shipment rate.

Deliver all over Pakistan Audio Video AV To Hdmi Converter This Audio Video To HDMI Converter Converts Audio And Video Signals From Av Output Of Your Device And Converts Them Into HDMI Signals So That Your Media Can Be Viewed On Your Newer LED/LCD Or Television Sets Which Lacks Av Input Ports But Have HDMI. Key Features: 1) High Quality Video Output 2) Durable Quality Material 3) Lightweight And Compact Design Specifications: Type: Audio Video Input To HDMI Output Package Includes: 1x AUDIO Video To HDMI Converter Views: 16

Operating Voltage - 2.5V ~ 5.5V Input Voltage (recommended) - 5V Input Voltage (limits) - 5.5V Recommended Input Current - 800 mA Type - Stereo

Title: Audio Video AV To Hdmi Converter Description: Audio Video AV To Hdmi Converter - Detail: This Audio Video To HDMI Converter Converts Audio And Video Signals From Av Output Of Your Device And Converts Them Into HDMI Signals So That Your Media Can Be Viewed On Your Newer LED/LCD Or Television Sets Which Lacks Av Input Ports But Have HDMI. Key Features: 1) High Quality Video Output 2) Durable Quality Material 3) Lightweight And Compact Design

This Audio Video to HDMI Converter converts audio and video signals from av output of your device and converts them into HDMI signals so that your media can be viewed on your newer LEDLCD or Television sets which lacks av input ports but have HDMI. Key Features 1 High Quality video output 2 Durable quality material 3 Lightweight and compact design CASH ON DELIVERY ALL PAKISTAN COURIER CHARGES RS 200 CALL OR SMS YOUR ADDRESS FOR DELIVERY

AUDIOHUB COMBOAudiohub combos deliver optimum performance, flexibility and sound quality for a wide array of audio inputs: Keyboards, e-drums, mics, acoustic and electric instruments and playback are all at home with an Audiohub combo.FLEXIBILITYDesigned with flexibility in mind, the AH80 has 3 independent channels and can accommodate a variety of input options simultaneously via XLR, Jack and Mini Jack connectors. In addition the front panel features a Line Out to link to another amplifier plus a Phones... Brand Laney Product type Guitar & Bass Amplifiers Price ₨ 37000

Input Audio: Coaxial or Toslink digital audio Output Audio: L/R audio Input audio connector: Toslink.1XRCA(Coaxial) Output audio connector: 2XRCA(R/L) Sampling rate: 32, 44.1, 48 and 96 KHz Operating temperature:0~70°C Operating humidity:10%~85%RH(no condensation) External power supply:5V DC/1A Power consumption:0.5W Dimension: 50 x 40 x 26 mm Color:Black Weight:90 g Package weight:100 g 1 x Digital to Analog Audio Converter Adapter 1x 3.5mm to RC Cable 1.5m 1 x USB Power Cable 1 x 1.5m Fiber Optical cable

Input Audio: Coaxial or Toslink digital audio Output Audio: L/R audio Input audio connector: Toslink.1XRCA(Coaxial) Output audio connector: 2XRCA(R/L) Sampling rate: 32, 44.1, 48 and 96 KHz Operating temperature:0~70°C Operating humidity:10%~85%RH(no condensation) External power supply:5V DC/1A Power consumption:0.5W Dimension: 50 x 40 x 26 mm Color:Black Weight:90 g Package weight:100 g

Input Voltage: DC 5 V Audio Out: L R G (it must be connected to amplifier) Receive audio signals from mobile Extraordinary Range 10 meters. Smallest and Powerful Best for any kind of amplifier. Dimensions: 24mm x 15mm x 1mm

Type Audio Midi Interfaces Product Description A 24-bit USB recording interface. The compact Alesis iO2 EXPRESS audio-recording interface is ideal for home studios and portable recording setups. The 2-channel USB interface for Mac and PC-based systems enables you to record at up to 24-bit resolution for input into virtually all DAW, recording, and performance software. The Alesis i02 EXPRESS recording interface is small enough to comfortably fit into your mobile recording rig, laptop bag, or backpack, yet it contains high-quality components and circuitry suitable for the studio. Flexible recording and playback The i02 EXPRESS interface's discrete-design preamplifiers and true 48-volt phantom power ensure that you capture microphones' complete signal. High quality analog-to-digital and digital-to-analog converters ensure that every detail of your session or performance gets recorded – and played back on your monitoring system. It's class compliant, so you can use the plug-and-play Alesis iO2 EXPRESS with virtually any computer. The iO2 EXPRESS is USB bus powered so you won't need to carry a bulky power supply, and its performance is optimized for minimal laptop battery drain so you'll be able to track long sessions and gigs remotely. Complete iO The iO2 EXPRESS has 2 input channels. Each channel has an XLR microphone input, a 1/4" TRS insert for external effects units, and a 1/4" TS jack that works with line-level sources and can accommodate direct connection of guitars. The Alesis iO2 EXPRESS sends and receives 2 audio channels on a single USB cable for simple, universal interface. You can monitor your sessions on any studio monitoring or other loudspeaker system via dual 1/4" balanced outputs. For remote tracking and alternative playback, the iO2 EXPRESS has a 1/4" TRS headphone output. The iO2 EXPRESS features traditional MIDI In and Out jacks for playing and controlling software with keyboard and pad controllers, workstations, and other MIDI-compatible instruments. Level management Each channel has a gain trim control, and there's a master level control for optimal gain staging. When monitoring on headphones, you'll appreciate the dedicated volume control. You can also visually monitor levels and operation using the tricolor, stereo metering tree and lighted status indicators. Complete the package The Alesis iO2 EXPRESS comes complete with a copy of Steinberg Cubase LE digital audio workstation (DAW) software. Cubase is one of the most popular DAWs in the world thanks to its intuitive approach to composing, recording, editing, and mixing. In addition to the included software, the Alesis iO2 EXPRESS is compatible with virtually all audio and MIDI software. Features 2-channel computer audio recording interface Record up to 24-bit/48kHz audio into virtually any software Monitor sessions with balanced studio monitor and headphone outputs High-quality A/D and D/A converters, discrete-design preamps, 48V phantom power Inputs for microphones, line-level sources, and instruments including guitars Tricolor stereo level meter and lighted status indicators for visual monitoring MIDI Input and Output jacks for playing and controlling software instruments USB bus powered – no external power supply needed Includes: iO2 EXPRESS interface USB cable iO2 Express Audio Interface Specifications: SYSTEM REQUIREMENTS Mac: OS X 10.2+ Windows: XP, Vista, or 7 USB port FREQUENCY RESPONSE MIC/LINE IN to USB OUT: ±0.1dB MIC/LINE IN to MAIN OUT (through ADC/DAC) ±0.35dB SIGNAL-TO-NOISE RATIO (SNR) MIC/LINE IN (balanced) to INSERT OUT: 110dB A-weighted, input impedance at XLR or 1/4" jack = 600 ohms GUITAR IN (unbalanced) to INSERT OUT: 99dB A-weighted, input impedance at 1/4" jack = 600 ohms MIC/LINE IN (balanced) to USB OUT: 99dB A-weighted, input impedance at MIC or LINE jack = 600 ohms GUITAR IN (unbalanced) to USB OUT: 94dB A-weighted, input impedance at 1/4" jack = 600 ohms MIC/LINE IN (balanced) to MAIN OUT (through ADC/DAC): 97dB A-weighted, input impedance at MIC or LINE jack = 600 ohms MIC/LINE IN (balanced) to MAIN OUT (through direct monitor): 95dB A-weighted, input impedance at MIC or LINE jack = 600 ohms TOTAL HARMONIC DISTORTION + NOISE (THD+N) MIC/LINE IN (balanced) to INSERT OUT: GUITAR IN (unbalanced) to INSERT OUT: % Input Gain = minimum, 1KHz input signal, INSERT OUT = 5.3dBV MIC/LINE IN (balanced) to USB OUT: % Input Gain = minimum, 1KHz input signal, USB OUT = -0.3dBFS GUITAR IN (unbalanced) to USB OUT: % Input Gain = minimum, 1KHz input signal, USB OUT = -0.7dBFS MIC/LINE IN (balanced) to MAIN OUT (through ADC/DAC): % Input Gain = minimum, 1KHz input signal, MAIN OUT = 5.6dBV MIC/LINE IN (balanced) to MAIN OUT (through direct monitor): % Input Gain = minimum, 1KHz input signal, MAIN OUT = 5.6dBV

Type Audio Midi Interfaces Product Description Robust 2 in, 4 out USB powered recording interface. The Focusrite Scarlett 2i4 is a robust 2 in / 4 out USB recording interface that combines affordability, cross-platform operation, a comprehensive feature set and the best audio performance in its class. It’s a perfect match for both the musician and the digital DJ – and it comes in an elegant, road-ready anodized aluminum unibody case.Scarlett 2i4 is a great tool for any musician, with its two award-winning Focusrite microphone/line/instrument preamps accessed via universal front-panel XLR/TRS sockets, combined with professional 24-bit, 96kHz conversion, plus class-leading analogue and digital design from input to output to ensure pristine audio quality throughout the signal path.With its 48V phantom power capability, Scarlett 2i4 is perfect for recording guitar, vocal, or even stereo piano, with high-quality condenser mics. You will love the direct monitoring mode, which removes the latencies associated with listening back to the input signal through the DAW. You can record into the DAW in real time, whilst hearing a zero latency monitor feed from their input sources, controlled by a single knob for easy blending between direct monitoring and DAW playback. In common with other interfaces in the Scarlett series, input level controls feature a novel LED “signal halo” around the knob that indicates signal presence (green) and input overload (red), while a large-diameter silver volume knob gives you full and accurate control over monitor levels at all times, so whether you are mixing your music, or listening back to the track, the levels will always be in your control.Alongside the two Focusrite preamps are four RCA phono outputs, two of which are also available on balanced TRS sockets. These, coupled with the high-level headphone output and flexible monitoring capability make Scarlett 2i4 ideal for digital DJs. Send outputs 1 & 2 to the main PA and use 3 & 4 for cueing, or send all four to a mixer. The converter performance ensures that the quality of the audio streamed from the computer is sonically superb. An A/B source switch for monitoring either of two stereo output pairs via the high-level headphone output provide everything that’s required from a DJ interface.MIDI input and output are included in Scarlett 2i4, allowing capture of performances with MIDI keyboards and controllers and the ability to play parts out to instruments and sound modules, recording their audio via 2i4’s TRS inputs.Scarlett 2i4 comes complete with an excellent package of software tools to help you get your music down straight away. The latest version of the Focusrite Scarlett Plug-in Suite includes Compressor, Reverb, Gate and EQ in the form of VST/AU/RTAS plug-ins. Focusrite’s established Xcite+ bundle is also included, which features Ableton Live Lite (for all your production, performance and compositional needs), Novation’s Bass Station soft synth and over 1GB of royalty-free samples from Loopmasters.Scarlett 2i4 delivers high quality, 24-bit 96kHz audio to and from both Macintosh and Windows computers with USB 2.0 capability – and it’s bus powered so you only need to plug in the included USB cable to start making music. Features Dual mic/line/hi-Z instrument inputs on universal XLR/TRS front-panel connectors Precision, quality conversion at up to 24-bit, 96kHz sampling Better than 105dB dynamic range on record and playback Operates solely on bus power Front-panel inputs and headphone out Switchable Phantom Power Switchable 10 dB pad on all inputs Rear panel balanced TRS outputs (1 & 2) and phono (1–4) Headphone monitor switched to hear either pair of outputs Mixer knob for direct monitoring, mixes between source and outputs 1 & 2 Large monitor level control MIDI in and out Anodized aluminum unibody chassis Scarlett 2i4 USB Audio Interface Specifications: Mic Frequency Response 20Hz - 20kHz +/- 0.1 dB THD+N Equivalent Input Noise (EIN) Gain Range +10dB to +55dB (0dB to +45dB when pad is engaged) Max Input Level +3.5dBu Line Frequency Response 20Hz - 20kHz +/- 0.1dB THD+N Noise -90 dBu (22 Hz/22KHz bandpass filter) Signal to Noise Ratio > 100dB Gain Range -10dB to +35dB (-20dB to +25dB when pad is engaged) Max Input Level +26dBu (at 1% THD+N) Instrument Frequency Response 20Hz - 20kHz +/- 0.1dB THD+N % (‘A’ weighted measured with 16dB input gain, -1dBFS at output and 22Hz/22kHz bandpass filter) Noise -87dBu (22Hz/22kHz bandpass filter) Gain Range +10dB to +55dB (0dB to +45dB when pad is engaged) Max Input Level +3dBu (+13dBu pad in) Analogue Output Performance Nominal Output Level 0dBFS = +10dBu, balanced 0dBFS = +5.5bBu, unbalanced Frequency Response 20Hz - 20kHz +/- 0.2dB THD+N Output Impedance Power Output into mW Digital Performance Clock sources Internal clock only A-D Dynamic Range 105dB 'A-weighted' (all inputs). Converter chipset A-D dynamic range 114dB D-A Dynamic Range 104dB 'A-weighted' (all outputs). Converter chipset D-A dynamic range 114dB Supported sample rates 44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz Crosstalk Input to Input Better than 90dB Output to Output Better than 90dB Input to Output Better than 85dB Input Metering Ring LED lit Green Signal present (-24 dBFS) Ring LED lit Red Signal overload (0dBFS), peak held for approximately 1 second Weight and Dimensions Height 48 mm Width 210 mm Depth 140 mm Weight 890 g

Type Audio Interfaces Product Description Now get the power and precision of Focusrite recording on your iPad, Mac or PC. iTrack Solo provides the best solution for recording your instruments and vocals using an iPad. Featuring a Focusrite microphone preamp and an input to record directly from electric guitars, iTrack Solo is the perfect companion for any singer-songwriter wanting to take their demos to the next level. Using the very best in digital audio technology, iTrack Solo will capture your sound with pristine quality. Simply plug in and press record. It couldn’t be simpler. Since , Focusrite has been a leading manufacturer in the professional audio field. Focusrite mic pres have played a key part in the recording of hundreds of hit records and they’re a top choice of leading artists, recording studios and engineers around the world. This experience has been used to great effect when designing the input section of iTrack Solo, which features a clean, low-noise, low-distortion preamp. iTrack Solo also provides phantom power for professional condenser microphones. With a guitar input alongside the microphone input, you are free to record both vocals and your instrument simultaneously to separate tracks in your software*. You could even use both a microphone on your guitar and the guitar input at the same time to get a different sound. Unique halo signal indicators, also found on Scarlett 2i2, let you know that you’ve got a good volume for recording. Red means that your signal is clipping, and that you should reduce the gain. The halo will momentarily turn amber as the signal returns to a healthy level, at which point the halo will turn green again. A large monitor dial provides a tactile control for the volume of your speakers and headphones, whilst a high-quality headphone amp provides a clean yet loud signal to headphones connected to the front panel socket. The direct monitor switch routes audio directly from the inputs to both the headphone and speaker outputs. This allows you to hear the incoming signal with no latency, which can be distracting and affect your performance. On the rear panel you will find phono outputs allowing you to connect iTrack Solo to a pair of powered speakers, or to your home Hi-Fi system. The speaker volume can then be controlled using the large dial on the front of iTrack Solo meaning everything you need is within reach. iTrack Solo will also work with Mac and PC allowing you to record with your desktop or laptop. There is an included version of Ableton Live Lite and Focusrite’s Scarlett Plug-In Suite, which provides essential effects for recording – Reverb, Compression, Gate and EQ. *Please note that at current, GarageBand for iOS will record two simultaneous inputs to a single stereo track, which cannot be separated using iPad. The two separate signals can be separated by transferring your session to a Mac. Other apps are available which allow recording to two separate tracks simultaneously. Features High-quality award-winning Focusrite microphone input Compatible with iPad, Mac OS X and Windows Record your songs with many apps including GarageBand Directly connect your microphone or instrument Aluminium unibody case Signal halos for level and clip indication Outputs on the back panel allow you to connect directly to your speakers Front panel headphone output for easy monitoring Large speaker/headphone level dial and “Direct Monitor” function Switchable phantom power for condenser microphones Ableton Live Lite recording software to use with iTrack Solo and your PC or Mac Scarlett Plug-In Suite: professional plug-ins for PC and Mac iTrack Solo Audio Interface for iPad, Mac and PC Specifications: 2 in / 2 out USB audio interface 96kHz, 24-bit conversion One Focusrite microphone preamplifier Silver “soft-touch” aluminium unibody chassis Front Panel 1 microphone input – XLR 1 Instrument input – ¼’ unbalanced 2 Gain knobs 2 Gain halo signal indicators 48V Phantom power switch Direct monitor switch Large monitor level dial (controls headphone and line level outputs) USB Connection LED indicator Headphone output - ¼” TRS Jack Rear Panel 2 unbalanced monitor outputs – RCA Phono DEVICE LINK port (to connect iTrack Solo to iPad) USB 2.0 Port Kensington Lock slot Included Software Ableton Live Lite 8 – professional music making software to use your iTrack Solo with a Mac or PC. Focusrite Scarlett Plug-in Suite – collection of software plug-ins bringing effects to your music software (like Ableton Live for example) Novation Bass Station – legendary Novation synthesizer modelled in software as a soft-synth plug-in instrument Loopmasters content – 1 Gigabyte of royalty free samples Mic Frequency Response: 20Hz - 20kHz +/- 0.2dB THD+N Equivalent Input Noise (EIN) Gain Range: +10dB to +55dB Max Input Level: -3dBu Instrument Frequency Response: 20Hz - 20kHz +/- 0.2dB THD+N %: (measured with -1dBFS input and 22Hz/22kHz bandpass filter) Noise: -87dBu (22Hz/22kHz bandpass filter) Gain Range: -10dB to +55dB Max Input Level: -3dBu Analogue Output Performance Nominal Output Level: 0dBFS = +9dBu, unbalanced Frequency Response: 20Hz - 20kHz +/- 0.2dB Noise: -87dBu (22Hz/22kHz bandpass filter) Gain Range: +10dB to +55dB Max Input Level: -3dBu Analogue Output Performance Nominal Output Level: 0dBFS = 10dBu, balanced Frequency Response: 20Hz - 20kHz +/- 0.2dB THD+N Digital Performance Clock sources: Internal clock only A-D Dynamic Range: 105dB 'A-weighted' (all inputs). Converter chipset A-D dynamic range: 114dB D-A Dynamic Range: 105dB 'A-weighted' (all outputs). Converter chipset D-A dynamic range: 114dB Supported sample rates: 44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz – Mac and PC 44.1kHz, 48kHz – iPad Crosstalk Input to Input: Better than 90dB Output to Output: Better than 90dB Input to Output: Better than 85dB Input Metering Ring LED lit Green: Signal present (-24 dBFS) Ring LED lit Red: Signal overload (0dBFS), peak held for approximately 1 second Weight and Dimensions Height: 45mm / 1-3/4“ Width: 150mm / 6” Depth: 100mm / 4” Weight 500g / 1lb.

Type Audio Interfaces Recording Package Product Description A complete professional recording package for musicians. Focusrite has been a force behind some of the most high-end recording systems used in the world's top studios, and now they've comprised an entire studio bundle for your Mac or PC. The Scarlett Studio bundle includes a Scarlett 2i2 USB audio interface, Scarlett CM25 studio condenser mic, and a pair of Scarlett HP60 reference headphones. Scarlett 2i2 Audio Interface The audio interface is the key to making professional recording. At the heart of Scarlett Studio is the Scarlett 2i2. This interface connects to your Mac or PC via the USB port and provides 2-inputs and 2-outputs to your music software. Scarlett 2i2 delivers the superb quality and legendary Focusrite sound that audio industry professionals have relied on for decades. Plug your instrument – bass, guitar, keyboard, synth, you name it – and the included studio microphone straight into the front panel and 2i2 brings them into your computer at the highest possible quality. You can record, edit and mix until you have just the sound you want, with the best possible playback quality so you can hear exactly what you’re doing. Studio-quality microphone and headphones Scarlett Studio really does give you everything you need to start recording. There’s a studio condenser microphone, the CM25, that’s specially designed to catch the life and soul of your vocals and acoustic instruments. Clean, smooth and sensitive, it captures every nuance. If you can hear it, you can record it. There’s even a high-quality, low-noise microphone cable included, to connect the CM25 to the Scarlett 2i2. The included HP60 studio monitor headphones tell it like it is. Accuracy is number one when it comes to monitoring. Unlike many headphones that flatter the sound, making it sound better than it really is, the HP60s give you a clear and accurate impression of exactly how your music sounds, so you can get it just the way you want it. And when you play it back elsewhere, it’ll sound great. Professional recording software Scarlett Studio includes all the software you need to get you going straight away. Cubase LE 6 is powerful music production software for recording and mixing. Focusrite Scarlett plug-ins are a set of essential tools for polishing your mix, like compression to tighten up that bass or keep your vocals smooth and even; equalisers to bring out the character in your sound, gating to help remove noises, and reverb to give your music the space it needs. The Novation Bass Station is a software synthesizer that you can use to add additional bass or melody sounds to your music. Because it is a synth you can create totally new sounds that no one has ever heard before, or recreate classic sounds. There is also a sample pack from Loopmasters to add drum loops or sound effects to your track. Features Studio-quality recording package for your Mac or PC Focusrite recording technology Includes a Scarlett 2i2 audio interface, CM25 studio condenser, HP60 reference headphones, and mic cable Scarlett Studio Scarlett 2i2 2 in / 2 out USB audio interface 96 KHz, 24-bit conversion 2 Focusrite microphone preamplifiers Red anodised aluminium unibody chassis Unique LED 'halo' indicators to keep levels honest Scarlett Studio CM25 microphone Large-diaphragm condenser microphone 3 m red cable included Mic stand adaptor Scarlett Studio HP60 Headphones Reference quality headphones Extended frequency response Adjustable fit Closed back design to prevent audio spill when recording Scarlett Studio Specifications: System Requirements Mac OS X 10.7 Lion or OS X 10.8 Mountain Lion Windows 7 (all versions) Windows 8 (excluding Windows RT) Analog Input Performance Mic Frequency Response 20Hz - 20kHz +/- 0.1 dB THD+N Equivalent Input Noise (EIN) Gain Range +10dB to +55dB Max Input Level -3dBu Line Frequency Response 20Hz - 20kHz +/- 0.1dB THD+N Noise -90 dBu (22 Hz/22KHz bandpass filter) Signal to Noise Ratio > 100dB Gain Range -10dB to +35dB Max Input Level +20dBu Instrument Frequency Response 20Hz - 20kHz +/- 0.1dB THD+N % (measured with -8dBu input and 22Hz/22kHz bandpass filter) Noise -87dBu (22Hz/22kHz bandpass filter) Gain Range +10dB to +55dB Max Input Level -3dBu Analogue Output Performance Nominal Output Level 0dBFS = 10dBu, balanced Frequency Response 20Hz - 20kHz +/- 0.2dB THD+N Output Impedance Power Output into mW Power Output into mW Digital Performance Clock sources Internal clock only A-D Dynamic Range 105dB 'A-weighted' (all inputs). Converter chipset A-D dynamic range 114dB D-A Dynamic Range 104dB 'A-weighted' (all outputs). Converter chipset D-A dynamic range 114dB Supported sample rates 44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz Crosstalk Input to Input Better than 90dB Output to Output Better than 90dB Input to Output Better than 85dB Input Metering Ring LED lit Green Signal present (-24 dBFS) Ring LED lit Red Signal overload (0dBFS), peak held for approximately 1 second Weight and Dimensions Height 45 mm / 1 ¾ “ Width 175 mm / 7” Depth 100 mm / 4” Weight 580 g / 1.3 lb

A complete professional recording package for musicians. Focusrite has been a force behind some of the most high-end recording systems used in the world's top studios, and now they've comprised an entire studio bundle for your Mac or PC. The Scarlett Studio bundle includes a Scarlett 2i2 USB audio interface, Scarlett CM25 studio condenser mic, and a pair of Scarlett HP60 reference headphones. Scarlett 2i2 Audio Interface The audio interface is the key to making professional recording. At the heart of Scarlett Studio is the Scarlett 2i2. This interface connects to your Mac or PC via the USB port and provides 2-inputs and 2-outputs to your music software. Scarlett 2i2 delivers the superb quality and legendary Focusrite sound that audio industry professionals have relied on for decades. Plug your instrument – bass, guitar, keyboard, synth, you name it – and the included studio microphone straight into the front panel and 2i2 brings them into your computer at the highest possible quality. You can record, edit and mix until you have just the sound you want, with the best possible playback quality so you can hear exactly what you’re doing. Features Studio-quality recording package for your Mac or PC Focusrite recording technology Includes a Scarlett 2i2 audio interface, CM25 studio condenser, HP60 reference headphones, and mic cable Scarlett Studio Scarlett 2i2 2 in / 2 out USB audio interface 96 KHz, 24-bit conversion 2 Focusrite microphone preamplifiers Red anodised aluminium unibody chassis Unique LED 'halo' indicators to keep levels honest Scarlett Studio CM25 microphone Large-diaphragm condenser microphone 3 m red cable included Mic stand adaptor Scarlett Studio HP60 Headphones Reference quality headphones Extended frequency response Adjustable fit Closed back design to prevent audio spill when recording Scarlett Studio Specifications: System Requirements Mac OS X 10.7 Lion or OS X 10.8 Mountain Lion Windows 7 (all versions) Windows 8 (excluding Windows RT) Analog Input Performance Mic Frequency Response 20Hz - 20kHz +/- 0.1 dB THD+N Equivalent Input Noise (EIN) Gain Range +10dB to +55dB Max Input Level -3dBu Line Frequency Response 20Hz - 20kHz +/- 0.1dB THD+N Noise -90 dBu (22 Hz/22KHz bandpass filter) Signal to Noise Ratio > 100dB Gain Range -10dB to +35dB Max Input Level +20dBu Instrument Frequency Response 20Hz - 20kHz +/- 0.1dB THD+N % (measured with -8dBu input and 22Hz/22kHz bandpass filter) Noise -87dBu (22Hz/22kHz bandpass filter) Gain Range +10dB to +55dB Max Input Level -3dBu Analogue Output Performance Nominal Output Level 0dBFS = 10dBu, balanced Frequency Response 20Hz - 20kHz +/- 0.2dB THD+N Output Impedance Power Output into mW Power Output into mW Digital Performance Clock sources Internal clock only A-D Dynamic Range 105dB 'A-weighted' (all inputs). Converter chipset A-D dynamic range 114dB D-A Dynamic Range 104dB 'A-weighted' (all outputs). Converter chipset D-A dynamic range 114dB Supported sample rates 44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz Crosstalk Input to Input Better than 90dB Output to Output Better than 90dB Input to Output Better than 85dB Input Metering Ring LED lit Green Signal present (-24 dBFS) Ring LED lit Red Signal overload (0dBFS), peak held for approximately 1 second Weight and Dimensions Height 45 mm / 1 ¾ “ Width 175 mm / 7” Depth 100 mm / 4” Weight 580 g / 1.3 lb Shop No. 345-D, 3rd Floor Star City Shopping Mall, Opp,Bambino Cinema Abdullah Haroon Road Saddar Karachi Pakistan

A complete professional recording package for musicians. Focusrite has been a force behind some of the most high-end recording systems used in the world's top studios, and now they've comprised an entire studio bundle for your Mac or PC. The Scarlett Studio bundle includes a Scarlett 2i2 USB audio interface, Scarlett CM25 studio condenser mic, and a pair of Scarlett HP60 reference headphones. Scarlett 2i2 Audio Interface The audio interface is the key to making professional recording. At the heart of Scarlett Studio is the Scarlett 2i2. This interface connects to your Mac or PC via the USB port and provides 2-inputs and 2-outputs to your music software. Scarlett 2i2 delivers the superb quality and legendary Focusrite sound that audio industry professionals have relied on for decades. Plug your instrument – bass, guitar, keyboard, synth, you name it – and the included studio microphone straight into the front panel and 2i2 brings them into your computer at the highest possible quality. You can record, edit and mix until you have just the sound you want, with the best possible playback quality so you can hear exactly what you’re doing. Features Studio-quality recording package for your Mac or PC Focusrite recording technology Includes a Scarlett 2i2 audio interface, CM25 studio condenser, HP60 reference headphones, and mic cable Scarlett Studio Scarlett 2i2 2 in / 2 out USB audio interface 96 KHz, 24-bit conversion 2 Focusrite microphone preamplifiers Red anodised aluminium unibody chassis Unique LED 'halo' indicators to keep levels honest Scarlett Studio CM25 microphone Large-diaphragm condenser microphone 3 m red cable included Mic stand adaptor Scarlett Studio HP60 Headphones Reference quality headphones Extended frequency response Adjustable fit Closed back design to prevent audio spill when recording Scarlett Studio Specifications: System Requirements Mac OS X 10.7 Lion or OS X 10.8 Mountain Lion Windows 7 (all versions) Windows 8 (excluding Windows RT) Analog Input Performance Mic Frequency Response 20Hz - 20kHz +/- 0.1 dB THD+N Equivalent Input Noise (EIN) Gain Range +10dB to +55dB Max Input Level -3dBu Line Frequency Response 20Hz - 20kHz +/- 0.1dB THD+N Noise -90 dBu (22 Hz/22KHz bandpass filter) Signal to Noise Ratio > 100dB Gain Range -10dB to +35dB Max Input Level +20dBu Instrument Frequency Response 20Hz - 20kHz +/- 0.1dB THD+N % (measured with -8dBu input and 22Hz/22kHz bandpass filter) Noise -87dBu (22Hz/22kHz bandpass filter) Gain Range +10dB to +55dB Max Input Level -3dBu Analogue Output Performance Nominal Output Level 0dBFS = 10dBu, balanced Frequency Response 20Hz - 20kHz +/- 0.2dB THD+N Output Impedance Power Output into mW Power Output into mW Digital Performance Clock sources Internal clock only A-D Dynamic Range 105dB 'A-weighted' (all inputs). Converter chipset A-D dynamic range 114dB D-A Dynamic Range 104dB 'A-weighted' (all outputs). Converter chipset D-A dynamic range 114dB Supported sample rates 44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz Crosstalk Input to Input Better than 90dB Output to Output Better than 90dB Input to Output Better than 85dB Input Metering Ring LED lit Green Signal present (-24 dBFS) Ring LED lit Red Signal overload (0dBFS), peak held for approximately 1 second Weight and Dimensions Height 45 mm / 1 ¾ “ Width 175 mm / 7” Depth 100 mm / 4” Weight 580 g / 1.3 lb

Type Audio Midi Interfaces Product Description Two-channel USB audio/MIDI interface. The M-Track interface from M-Audio® transforms your computer into a digital recording studio with plug-and-play simplicity. A single USB cable provides both power and a data connection to and from your laptop or desktop computer. M-Track offers the right connections for any instrument, from an electric guitar to a professional condenser mic—phantom power is provided. The low-profile format delivers professional control in a portable package. M-Track includes both Ignite by AIR and Ableton™ Live Lite music software programs. Accommodating Inputs M-Track is equipped with a versatile array of inputs to provide the best results with any type of audio source. Each channel offers an XLR input and a balanced 1/4" input. The XLR input is designed to work with microphones or other Lo-Z sources. The phantom power switch delivers 48V to the XLR inputs for use with professional condenser microphones. The 1/4" input can be set to receive line level signal, or switched to allow an electric guitar or bass to be plugged directly into the M-Track. The gain knob ensures the proper input level. Inserts Each input channel is also equipped with an insert jack, a professional addition not often found in this class of interface. The insert jack allows studio-grade effects to be used with any input source as you record. Improved Monitoring for Better Recordings M-Track offers ultra-low latency monitoring of the input signal—either through the speakers or via headphones. The monitor mix knob adjusts the balance between the direct inputs and the playback from your computer software. In addition, the input signal(s) can be monitored in stereo or mono using the convenient Stereo/Mono switch. This makes it easy to record new parts or add parts to an existing composition. The Headphone output offers its own level control. MIDI Matters In addition to the two audio channels, M-Track also support 16 channels of MIDI data and timing information. The MIDI In and MIDI out jack are compatible with all MIDI equipment. LED Metering Multi-color LED metering provides instant visual feedback of the main output levels, as well as the status of various M-Track settings. Ignite Ignite provides a refreshingly original and musician-centric way to quickly capture, combine, and arrange your musical ideas. The intuitive graphic interface encourages you to experiment and explore new directions. Smart MIDI Chord and Phrase Players empower your ideas and bring them to life through over 275 superior instruments sounds created by AIR Music Technology. When you’re ready to collaborate with other musicians or take your ideas to the next level, you can share them through SoundCloud, or export your WAV and MIDI files and import them into Pro Tools—or any DAW software. Best of all, Ignite offers seamless integration with your M-Audio keyboard controller, with no set-up chores to perform. Features Audio and MIDI unites your computer-based music studio USB power provides convenience and mobility Phantom power plus guitar-level switching accommodates any audio source Insert jack on each channel easily incorporate your favorite effects M-Track with Ignite Specifications: Minimum System Requirements (PC) Ignite Minimum System Requirements Windows 7 Home Premium, Professional, Ultimate (Service Pack 1), Windows 8, or Windows 8 Pro Intel Core 2 Duo 2.0GHz processor 2 GB RAM (4 GB recommended) 4 GB hard drive space RPM hard drive 1 available USB port Compatibility: ASIO or WASAPI (Windows) Minimum System Requirements (Mac) Ignite Minimum System Requirements Mac OS X or 10.8 Intel Core 2 Duo 2.0GHz processor 2 GB RAM (4 GB recommended) 4 GB hard drive space RPM hard drive 1 available USB port Compatibility: Core Audio (Mac)

Two-channel USB audio/MIDI interface. The M-Track interface from M-Audio® transforms your computer into a digital recording studio with plug-and-play simplicity. A single USB cable provides both power and a data connection to and from your laptop or desktop computer. M-Track offers the right connections for any instrument, from an electric guitar to a professional condenser mic—phantom power is provided. The low-profile format delivers professional control in a portable package. M-Track includes both Ignite by AIR and Ableton™ Live Lite music software programs. Accommodating Inputs M-Track is equipped with a versatile array of inputs to provide the best results with any type of audio source. Each channel offers an XLR input and a balanced 1/4" input. The XLR input is designed to work with microphones or other Lo-Z sources. The phantom power switch delivers 48V to the XLR inputs for use with professional condenser microphones. The 1/4" input can be set to receive line level signal, or switched to allow an electric guitar or bass to be plugged directly into the M-Track. The gain knob ensures the proper input level. Inserts Each input channel is also equipped with an insert jack, a professional addition not often found in this class of interface. The insert jack allows studio-grade effects to be used with any input source as you record. Improved Monitoring for Better Recordings M-Track offers ultra-low latency monitoring of the input signal—either through the speakers or via headphones. The monitor mix knob adjusts the balance between the direct inputs and the playback from your computer software. In addition, the input signal(s) can be monitored in stereo or mono using the convenient Stereo/Mono switch. This makes it easy to record new parts or add parts to an existing composition. The Headphone output offers its own level control. MIDI Matters In addition to the two audio channels, M-Track also support 16 channels of MIDI data and timing information. The MIDI In and MIDI out jack are compatible with all MIDI equipment. Features Audio and MIDI unites your computer-based music studio USB power provides convenience and mobility Phantom power plus guitar-level switching accommodates any audio source Insert jack on each channel easily incorporate your favorite effects M-Track with Ignite Specifications: Minimum System Requirements (PC) Ignite Minimum System Requirements Windows 7 Home Premium, Professional, Ultimate (Service Pack 1), Windows 8, or Windows 8 Pro Intel Core 2 Duo 2.0GHz processor 2 GB RAM (4 GB recommended) 4 GB hard drive space RPM hard drive 1 available USB port Compatibility: ASIO or WASAPI (Windows) Minimum System Requirements (Mac) Ignite Minimum System Requirements Mac OS X or 10.8 Intel Core 2 Duo 2.0GHz processor 2 GB RAM (4 GB recommended) 4 GB hard drive space RPM hard drive 1 available USB port Compatibility: Core Audio (Mac) Shop No. 345-D, 3rd Floor Star City Shopping Mall, Opp,Bambino Cinema Abdullah Haroon Road Saddar Karachi Pakistan

Panasonic WJ-MX50A The WJ-MX50A is a digital A/V mixer with 2-channel digital frame synchronization. It offers 287 wipe patterns, color correction and audio mixing capability for a wide variety of professional applications. Specifications: Source Input: x 4 (SOURCE 1/2/3/4) Composite Video Input: 1.0 Vp-p/75 Ohms, NTSC signal, BNC x 4, S-Video Input: Y signal; 1.0 Vp-p/75 Ohms, C signal: 0.286 Vp-p/75 Ohms, Mini DIN 4 connector x 4, Audio Input: SOURCE 112; XLR-type x 2, + 4 dBm/600 ohms (Balanced), Left and Right. SOURCE 3/4; Pin jack x 2, - 6 d Bs/20K ohms (Unbalanced), Left and Right Auxiliary Audio Input: x 2 (Aux 1/2) - 6dBs/20K ohms, Pin-jack (Unbalanced), Left and Right Microphone Input: -60 dBv/600 ohms, unbalanced, tip-ring-sleeve type phonejack x1 External Camera Input: 1.0 Vp-p/75 ohms, NTSC composite signal, BNCx 1, Y signal; 1.0 Vp-p/75 ohms, C signal; 0.286 Vp-p/75 ohms Mini DIN 4 connector x 1 GPI Input: Make-contact, BNC x 1 Character (TITLE) Input: 10-pin connector x 1 for optional Character Generator WJ-KB15, WJ-KB30, WJ-KB50 Program Output: x 2 (PROGRAM OUT 112) Composite Video Output: 1.0 Vp-p/75 ohms NTSC signal, BNC x 2, S-VideoOutput: Y signal; 1.0 Vp-p/75 ohms, C signal: 0.286 Vp-p/75 ohms, Mini DIN 4 connector x 2, Audio Output: PROGRAM OUT 1; XLR-type x 1, +4dBs/47 ohms (Balanced), Left and Right.; PROGRAM OUT 2: Pin-jack x 1, -6dBs/47 ohms (Unbalanced), Left and Right Preview Output: 1.0 Vp-p/75 ohms, NTSC composite signal, BNC x 1 Black Burst Output: Sync 0.286 Vp-p/75 ohms, Burst 0.286 Vp-p/75 ohms NTSC signal, BNC x 1 Advance Sync Output 4 Vp-p/75 ohms, BNCx2 Advance Reference Output: Sync 0.286 Vp-p/75 ohms, Burst 0.288 Vp-p/75 ohms, BNCx2 Headphone Output: - 20 dBv- - 80 dBv, 8 ohms unbalanced, tip-ring-sleeve type phone jack x 1 Digital Effects: Nega, Mosaic, Mono, Paint, Still, Strobe, Multi, Trail, A Synchro, Frame Matte Colors: Color Bar, White, Yellow, Cyan, Green, Magenta, Red, Blue, Black Wipe Patterns: 287 Patterns Joystick Control: Positioner, Color Correction Audio Mixer: A-bus, B-bus, AUX-1, AUX-2, Mic, Master Others: Audio-Follow, Auto-Take, Auto-Fade, Memory, Special Mode Frequency Range: Sync; 15.734 KHz+300 Hz SC; 3.579645 MHz+40 Hz Frequency Response: Y/C signal; 4.5 MHz (at - 3 dB), Audio; 20-20 KHz (at - 3 dB) Gain: Unity (Video) SIN (Typical): 56dB(S-Video), 50 dB (Composite), 7OdB (Audio at 1 KHz) Differential Gain: +5 deg.(Composite) Differential Phase: +5 % (Composite) Power Source: 120 VAC 60 Hz Power Consumption: Operation mode; Approximately 45 Watts Stand-by Mode: Approximately 5 Watts Ambient Operating Temperature: 32-104 °F (0-40 °C) Ambient Operating Humidity: Less than 90% Height: 6-7/16 inches Width: 18-7/8 inches Depth: 14-1/2 inches Weight: 15 lbs (6.8 Kg)

Now get the power and precision of Focusrite recording on your iPad, Mac or PC. iTrack Solo provides the best solution for recording your instruments and vocals using an iPad. Featuring a Focusrite microphone preamp and an input to record directly from electric guitars, iTrack Solo is the perfect companion for any singer-songwriter wanting to take their demos to the next level. Using the very best in digital audio technology, iTrack Solo will capture your sound with pristine quality. Simply plug in and press record. It couldn’t be simpler. Since , Focusrite has been a leading manufacturer in the professional audio field. Focusrite mic pres have played a key part in the recording of hundreds of hit records and they’re a top choice of leading artists, recording studios and engineers around the world. This experience has been used to great effect when designing the input section of iTrack Solo, which features a clean, low-noise, low-distortion preamp. iTrack Solo also provides phantom power for professional condenser microphones. With a guitar input alongside the microphone input, you are free to record both vocals and your instrument simultaneously to separate tracks in your software*. You could even use both a microphone on your guitar and the guitar input at the same time to get a different sound. Features High-quality award-winning Focusrite microphone input Compatible with iPad, Mac OS X and Windows Record your songs with many apps including GarageBand Directly connect your microphone or instrument Aluminium unibody case Signal halos for level and clip indication Outputs on the back panel allow you to connect directly to your speakers Front panel headphone output for easy monitoring Large speaker/headphone level dial and “Direct Monitor” function Switchable phantom power for condenser microphones Ableton Live Lite recording software to use with iTrack Solo and your PC or Mac Scarlett Plug-In Suite: professional plug-ins for PC and Mac iTrack Solo Audio Interface for iPad, Mac and PC Specifications: 2 in / 2 out USB audio interface 96kHz, 24-bit conversion One Focusrite microphone preamplifier Silver “soft-touch” aluminium unibody chassis Front Panel 1 microphone input – XLR 1 Instrument input – ¼’ unbalanced 2 Gain knobs 2 Gain halo signal indicators 48V Phantom power switch Direct monitor switch Large monitor level dial (controls headphone and line level outputs) USB Connection LED indicator Headphone output - ¼” TRS Jack Rear Panel 2 unbalanced monitor outputs – RCA Phono DEVICE LINK port (to connect iTrack Solo to iPad) USB 2.0 Port Kensington Lock slot Included Software Ableton Live Lite 8 – professional music making software to use your iTrack Solo with a Mac or PC. Focusrite Scarlett Plug-in Suite – collection of software plug-ins bringing effects to your music software (like Ableton Live for example) Novation Bass Station – legendary Novation synthesizer modelled in software as a soft-synth plug-in instrument Loopmasters content – 1 Gigabyte of royalty free samples Mic Frequency Response: 20Hz - 20kHz +/- 0.2dB THD+N Equivalent Input Noise (EIN) Gain Range: +10dB to +55dB Max Input Level: -3dBu Shop No. 345-D, 3rd Floor Star City Shopping Mall, Opp,Bambino Cinema Abdullah Haroon Road Saddar Karachi Pakistan

Now get the power and precision of Focusrite recording on your iPad, Mac or PC. iTrack Solo provides the best solution for recording your instruments and vocals using an iPad. Featuring a Focusrite microphone preamp and an input to record directly from electric guitars, iTrack Solo is the perfect companion for any singer-songwriter wanting to take their demos to the next level. Using the very best in digital audio technology, iTrack Solo will capture your sound with pristine quality. Simply plug in and press record. It couldn’t be simpler. Since , Focusrite has been a leading manufacturer in the professional audio field. Focusrite mic pres have played a key part in the recording of hundreds of hit records and they’re a top choice of leading artists, recording studios and engineers around the world. This experience has been used to great effect when designing the input section of iTrack Solo, which features a clean, low-noise, low-distortion preamp. iTrack Solo also provides phantom power for professional condenser microphones. With a guitar input alongside the microphone input, you are free to record both vocals and your instrument simultaneously to separate tracks in your software*. You could even use both a microphone on your guitar and the guitar input at the same time to get a different sound. Features High-quality award-winning Focusrite microphone input Compatible with iPad, Mac OS X and Windows Record your songs with many apps including GarageBand Directly connect your microphone or instrument Aluminium unibody case Signal halos for level and clip indication Outputs on the back panel allow you to connect directly to your speakers Front panel headphone output for easy monitoring Large speaker/headphone level dial and “Direct Monitor” function Switchable phantom power for condenser microphones Ableton Live Lite recording software to use with iTrack Solo and your PC or Mac Scarlett Plug-In Suite: professional plug-ins for PC and Mac iTrack Solo Audio Interface for iPad, Mac and PC Specifications: 2 in / 2 out USB audio interface 96kHz, 24-bit conversion One Focusrite microphone preamplifier Silver “soft-touch” aluminium unibody chassis Front Panel 1 microphone input – XLR 1 Instrument input – ¼’ unbalanced 2 Gain knobs 2 Gain halo signal indicators 48V Phantom power switch Direct monitor switch Large monitor level dial (controls headphone and line level outputs) USB Connection LED indicator Headphone output - ¼” TRS Jack Rear Panel 2 unbalanced monitor outputs – RCA Phono DEVICE LINK port (to connect iTrack Solo to iPad) USB 2.0 Port Kensington Lock slot Included Software Ableton Live Lite 8 – professional music making software to use your iTrack Solo with a Mac or PC. Focusrite Scarlett Plug-in Suite – collection of software plug-ins bringing effects to your music software (like Ableton Live for example) Novation Bass Station – legendary Novation synthesizer modelled in software as a soft-synth plug-in instrument Loopmasters content – 1 Gigabyte of royalty free samples Mic Frequency Response: 20Hz - 20kHz +/- 0.2dB THD+N Equivalent Input Noise (EIN) Gain Range: +10dB to +55dB Max Input Level: -3dBu

Price: Seller Type: A Professional / Business Condition: New Product Description Two-Channel USB Audio/MIDI Interface Using a single USB cable, M-Track transforms your desktop or laptop computer into a digital recording studio with plug-and-play simplicity. From an electric guitar to a professional condenser mic, M-Track offers the right connections for any instrument or any performer. Compatible with nearly all music software, M-Track includes both Ignite by AIR and Ableton™ Live Lite to get things started. Accommodating Inputs M-Track offers compatibility with a range of audio sources. Each channel offers an XLR input for use with microphones or other Lo-Z sources, plus a balanced 1/4" input. The phantom power switch delivers 48V to the XLR inputs for use with condenser microphones. The 1/4" line input can be switched to allow an electric guitar or bass to be plugged directly into the M-Track. The gain knob ensures the proper input level. Each channel is equipped with an insert jack for adding studio-grade effects as you record—a professional addition not often found in this class of interface. Improved Monitoring for Better Recordings M-Track offers ultra-low latency monitoring of the input signal. The monitor mix knob adjusts the balance between the direct inputs and the playback from your computer software. This makes it easy to record new parts or add layers to an existing composition. The Headphone output offers its own level control. In addition to the two audio channels, M-Track also supports 16 channels of MIDI data and timing information. The MIDI In and MIDI Out jack are compatible with all MIDI equipment. Multi-color LED metering provides instant visual feedback of the main output levels, as well as the status of various M-Track settings. Ignite Music Creation Software Ignite provides a refreshingly original and musician-centric way to quickly capture, combine, and arrange your musical ideas. The intuitive graphic interface encourages you to experiment and explore new directions. Smart MIDI technology empowers your ideas, as do over 275 superior instruments sounds created by AIR Music Technology. When you're ready to collaborate with other musicians, you can share your ideas through SoundCloud, or export your WAV and MIDI files and import them into any DAW software. Product Features 24-bit / 48 kHz digital audio processing Zero-latency audio monitoring 2 XLR mic inputs with selectable phantom power 2 balanced 1/4" line inputs with guitar-level switching 2 TRS 1/4" inserts; one per input channel MIDI In and Out jacks Balanced 1/4" main outputs with level control Headphone out with independent level control Convenient single USB cable data and power connection Includes Ignite by AIR and Ableton Live Lite Enter a New Musical Realm Let M-Track be your doorway to computer-based music making. Connections are easy, with a single USB cable providing both power and a data connection to your computer. Compact and comprehensive, M-Track offers all the control you need, neatly laid out for fast, intuitive access. Plus, M-Track includes powerful music software to make the most of your audio and MIDI creations. What's in the Box? M-Track USB audio/MIDI interface USB cable Ignite (Download) Ableton Live Lite User Guide Safety & Warranty Manual

Product Description Robust 2 in, 4 out USB powered recording interface. The Focusrite Scarlett 2i4 is a robust 2 in / 4 out USB recording interface that combines affordability, cross-platform operation, a comprehensive feature set and the best audio performance in its class. It’s a perfect match for both the musician and the digital DJ – and it comes in an elegant, road-ready anodized aluminum unibody case.Scarlett 2i4 is a great tool for any musician, with its two award-winning Focusrite microphone/line/instrument preamps accessed via universal front-panel XLR/TRS sockets, combined with professional 24-bit, 96kHz conversion, plus class-leading analogue and digital design from input to output to ensure pristine audio quality throughout the signal path.With its 48V phantom power capability, Scarlett 2i4 is perfect for recording guitar, vocal, or even stereo piano, with high-quality condenser mics. You will love the direct monitoring mode, which removes the latencies associated with listening back to the input signal through the DAW. Features Dual mic/line/hi-Z instrument inputs on universal XLR/TRS front-panel connectors Precision, quality conversion at up to 24-bit, 96kHz sampling Better than 105dB dynamic range on record and playback Operates solely on bus power Front-panel inputs and headphone out Switchable Phantom Power Switchable 10 dB pad on all inputs Rear panel balanced TRS outputs (1 & 2) and phono (1–4) Headphone monitor switched to hear either pair of outputs Mixer knob for direct monitoring, mixes between source and outputs 1 & 2 Large monitor level control MIDI in and out Anodized aluminum unibody chassis Scarlett 2i4 USB Audio Interface Specifications: Mic Frequency Response 20Hz - 20kHz +/- 0.1 dB THD+N Equivalent Input Noise (EIN) Gain Range +10dB to +55dB (0dB to +45dB when pad is engaged) Max Input Level +3.5dBu Line Frequency Response 20Hz - 20kHz +/- 0.1dB THD+N Noise -90 dBu (22 Hz/22KHz bandpass filter) Signal to Noise Ratio > 100dB Gain Range -10dB to +35dB (-20dB to +25dB when pad is engaged) Max Input Level +26dBu (at 1% THD+N) Instrument Frequency Response 20Hz - 20kHz +/- 0.1dB THD+N % (‘A’ weighted measured with 16dB input gain, -1dBFS at output and 22Hz/22kHz bandpass filter) Noise -87dBu (22Hz/22kHz bandpass filter) Gain Range +10dB to +55dB (0dB to +45dB when pad is engaged) Max Input Level +3dBu (+13dBu pad in) Analogue Output Performance Nominal Output Level 0dBFS = +10dBu, balanced 0dBFS = +5.5bBu, unbalanced Frequency Response 20Hz - 20kHz +/- 0.2dB THD+N Output Impedance Power Output into mW Digital Performance Clock sources Internal clock only A-D Dynamic Range 105dB 'A-weighted' (all inputs). Converter chipset A-D dynamic range 114dB D-A Dynamic Range 104dB 'A-weighted' (all outputs). Converter chipset D-A dynamic range 114dB Supported sample rates 44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz Crosstalk Input to Input Better than 90dB Output to Output Better than 90dB Input to Output Better than 85dB Input Metering Ring LED lit Green Signal present (-24 dBFS) Ring LED lit Red Signal overload (0dBFS), peak held for approximately 1 second Weight and Dimensions Height 48 mm Width 210 mm Depth 140 mm Weight 890 g Shop No. 345-D, 3rd Floor Star City Shopping Mall, Opp,Bambino Cinema Abdullah Haroon Road Saddar Karachi Pakistan

Product Description Robust 2 in, 4 out USB powered recording interface. The Focusrite Scarlett 2i4 is a robust 2 in / 4 out USB recording interface that combines affordability, cross-platform operation, a comprehensive feature set and the best audio performance in its class. It’s a perfect match for both the musician and the digital DJ – and it comes in an elegant, road-ready anodized aluminum unibody case.Scarlett 2i4 is a great tool for any musician, with its two award-winning Focusrite microphone/line/instrument preamps accessed via universal front-panel XLR/TRS sockets, combined with professional 24-bit, 96kHz conversion, plus class-leading analogue and digital design from input to output to ensure pristine audio quality throughout the signal path.With its 48V phantom power capability, Scarlett 2i4 is perfect for recording guitar, vocal, or even stereo piano, with high-quality condenser mics. You will love the direct monitoring mode, which removes the latencies associated with listening back to the input signal through the DAW. Features Dual mic/line/hi-Z instrument inputs on universal XLR/TRS front-panel connectors Precision, quality conversion at up to 24-bit, 96kHz sampling Better than 105dB dynamic range on record and playback Operates solely on bus power Front-panel inputs and headphone out Switchable Phantom Power Switchable 10 dB pad on all inputs Rear panel balanced TRS outputs (1 & 2) and phono (1–4) Headphone monitor switched to hear either pair of outputs Mixer knob for direct monitoring, mixes between source and outputs 1 & 2 Large monitor level control MIDI in and out Anodized aluminum unibody chassis Scarlett 2i4 USB Audio Interface Specifications: Mic Frequency Response 20Hz - 20kHz +/- 0.1 dB THD+N Equivalent Input Noise (EIN) Gain Range +10dB to +55dB (0dB to +45dB when pad is engaged) Max Input Level +3.5dBu Line Frequency Response 20Hz - 20kHz +/- 0.1dB THD+N Noise -90 dBu (22 Hz/22KHz bandpass filter) Signal to Noise Ratio > 100dB Gain Range -10dB to +35dB (-20dB to +25dB when pad is engaged) Max Input Level +26dBu (at 1% THD+N) Instrument Frequency Response 20Hz - 20kHz +/- 0.1dB THD+N % (‘A’ weighted measured with 16dB input gain, -1dBFS at output and 22Hz/22kHz bandpass filter) Noise -87dBu (22Hz/22kHz bandpass filter) Gain Range +10dB to +55dB (0dB to +45dB when pad is engaged) Max Input Level +3dBu (+13dBu pad in) Analogue Output Performance Nominal Output Level 0dBFS = +10dBu, balanced 0dBFS = +5.5bBu, unbalanced Frequency Response 20Hz - 20kHz +/- 0.2dB THD+N Output Impedance Power Output into 32O 24mW Digital Performance Clock sources Internal clock only A-D Dynamic Range 105dB 'A-weighted' (all inputs). Converter chipset A-D dynamic range 114dB D-A Dynamic Range 104dB 'A-weighted' (all outputs). Converter chipset D-A dynamic range 114dB Supported sample rates 44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz Crosstalk Input to Input Better than 90dB Output to Output Better than 90dB Input to Output Better than 85dB Input Metering Ring LED lit Green Signal present (-24 dBFS) Ring LED lit Red Signal overload (0dBFS), peak held for approximately 1 second Weight and Dimensions Height 48 mm Width 210 mm Depth 140 mm Weight 890 g

Now get the power and precision of Focusrite recording on your iPad, Mac or PC. iTrack Solo provides the best solution for recording your instruments and vocals using an iPad. Featuring a Focusrite microphone preamp and an input to record directly from electric guitars, iTrack Solo is the perfect companion for any singer-songwriter wanting to take their demos to the next level. Using the very best in digital audio technology, iTrack Solo will capture your sound with pristine quality. Simply plug in and press record. It couldn’t be simpler. Since 1985, Focusrite has been a leading manufacturer in the professional audio field. Focusrite mic pres have played a key part in the recording of hundreds of hit records and they’re a top choice of leading artists, recording studios and engineers around the world. This experience has been used to great effect when designing the input section of iTrack Solo, which features a clean, low-noise, low-distortion preamp. iTrack Solo also provides phantom power for professional condenser microphones. With a guitar input alongside the microphone input, you are free to record both vocals and your instrument simultaneously to separate tracks in your software*. You could even use both a microphone on your guitar and the guitar input at the same time to get a different sound. Features High-quality award-winning Focusrite microphone input Compatible with iPad, Mac OS X and Windows Record your songs with many apps including GarageBand Directly connect your microphone or instrument Aluminium unibody case Signal halos for level and clip indication Outputs on the back panel allow you to connect directly to your speakers Front panel headphone output for easy monitoring Large speaker/headphone level dial and “Direct Monitor” function Switchable phantom power for condenser microphones Ableton Live Lite recording software to use with iTrack Solo and your PC or Mac Scarlett Plug-In Suite: professional plug-ins for PC and Mac iTrack Solo Audio Interface for iPad, Mac and PC Specifications: 2 in / 2 out USB audio interface 96kHz, 24-bit conversion One Focusrite microphone preamplifier Silver “soft-touch” aluminium unibody chassis Front Panel 1 microphone input – XLR 1 Instrument input – ¼’ unbalanced 2 Gain knobs 2 Gain halo signal indicators 48V Phantom power switch Direct monitor switch Large monitor level dial (controls headphone and line level outputs) USB Connection LED indicator Headphone output - ¼” TRS Jack Rear Panel 2 unbalanced monitor outputs – RCA Phono DEVICE LINK port (to connect iTrack Solo to iPad) USB 2.0 Port Kensington Lock slot Included Software Ableton Live Lite 8 – professional music making software to use your iTrack Solo with a Mac or PC. Focusrite Scarlett Plug-in Suite – collection of software plug-ins bringing effects to your music software (like Ableton Live for example) Novation Bass Station – legendary Novation synthesizer modelled in software as a soft-synth plug-in instrument Loopmasters content – 1 Gigabyte of royalty free samples Mic Frequency Response: 20Hz - 20kHz +/- 0.2dB THD+N Views: 174

for home delivery visit www.proaudio.com.pk The Traveler-mk3 from MOTU can function as both a FireWire audio interface or stand-alone mixer, and is primarily engineered for high-end mobile recording applications. Equally suited to any other audio situation, the unit delivers 4 high quality microphone inputs, and can be powered from either a computer's FireWire bus or via optional battery packs. It also features internal DSP-driven mixing and effects processing. As an interface or stand-alone mixer, the Traveler-mk3 provides 28 separate inputs and 30 separate outputs, including 4 combo microphone/instrument analog inputs equipped with pre-amps, individual 48V phantom power switches and Digital Precision Trim controls adjustable from the front panel or CueMix FX software. DSP effects include a 60-second reverb, 7-band parametric EQ and various flavors of compression/limiting.Sturdy lightweight construction — ready to travel with you anywhere. Compact size (14.75 × 9 inches) — fits easily into a napsack, briefcase or computer bag and sits perfectly under any laptop. Powered by computer* — no additional power supply necessary for complete recording freedom. Optional battery power — standard field battery pack (sold separately) can be used for extended remote recording sessions and stand-alone operation as a complete digital mixer. 28 inputs / 30 outputs (at 44.1/48 kHz) — there’s no channel sharing in the Traveler-mk3. Mic inputs, TRS analog, AES/EBU, RCA S/PDIF and phones are all handled as separate channels. Four combo jacks provide hi-Z 1/4” guitar input or low-Z XLR mic input with transparent preamps, phantom power, pad and plenty of gain. Clip protection — Mic/guitar input limiter prevents digital clipping and distortion from overloaded signal levels up to +12 dB over zero. Individual 48V phantom power on each mic input — mix and match microphones. Four 24-bit 192kHz analog inputs and eight analog outputs on balanced/unbalanced 1/4″ TRS jacks. Digital Precision Trim™ — adjust input gain in 1dB increments on all analog inputs (mic/guitar inputs + quarter-inch TRS inputs). Fine-tune the balance of your analog inputs. Save and recall multiple trim setups. High-resolution recording — The Traveler-mk3 can operate all analog I/O at sample rates up to 192kHz. Flexible optical I/O — 16 channels of ADAT lightpipe, 8 channels of SMUX (96 kHz) or two pairs of stereo TOSLink. Mix and match formats between the two banks. CueMix FX™ — flexible 28 input/16 bus mixer with on-board DSP effects, including classic reverb with sends/returns, plus modeled EQ and vintage compression on every input and output. Multiple CueMix FX mixes — for example, create different monitor mixes for the main outs and headphones. Or add send/return loops for outboard gear with no latency. Advanced audio signal analysis — CueMix FX software provides real-time FFT and spectrogram “waterfall” displays for visual analysis of individual signals and entire mixes. Front-panel control — access your entire mix, or any Traveler-mk3 setting, directly from the front panel. Stand-alone operation — program your mixes at the studio and then bring the Traveler-mk3 to your gig — no computer needed. Just plug in the included DC power adapter. Tweak settings using the back-lit LCD. Sample-accurate MIDI — connect a MIDI controller and/or sound module with no separate interface needed. MIDI I/O is sample-accurate with supporting software. Expandable — add additional interfaces for more I/O as your needs grow. Compatible with the 8pre mic input expander — connect the 8pre via optical for 8 more mic inputs at sample rates up to 96 kHz fully integrated into the Traveler-mk3’s CueMix FX mixing environment. Eight 24-bit 192kHz outputs on balanced/u

Type Audio Midi Interfaces Product Description The Focusrite Scarlett 6i6 is a 6 in/6 out audio interface that connects to your PC, Mac or iPad via USB 2.0. It has two award winning Focusrite microphone preamplifiers, which deliver superb quality recordings from microphones and instruments, straight into your computer or iPad (Apple Camera Connection Kit required with iPad). Focusrite: Over 25 years of audio excellence Focusrite was commissioned to make its first no-holds-barred microphone preamps by Sir George Martin for his Air Studio facility in London. Over the following 25 years Focusrite designed some of the finest mic preamps in the music industry, and in recent years has developed a series of best-selling audio interfaces for people who really care about sound. Perfect for Producers and Bands Scarlett 6i6 is perfect for producers, recording artists or small bands. Featuring two award-winning Focusrite mic preamps and a stereo line input, 6i6 is great for recording vocals, guitar and a stage piano simultaneously. With the four balanced outputs, connect up to two sets of stereo monitors, and use the S/PDIF I/O for connecting digital sources. There are also two built-in headphone outputs with separate volume controls so multiple recording artists can listen to the mixes they need to get the best take. The inputs and outputs feature precision 24 bit A-D, D-A conversion at up to 96KHz in order to get the most accurate signal possible into and out of your computer.Hardware FeaturesThe outer case is a tough aluminium extrusion, which protects the components inside. There is a large main monitor control knob as well as two dedicated gain knobs for each mic input, each with two colour gain halos which light up green to indicate that sound is detected, and red if the level is too high. Both mic inputs can be switched between instrument, line and microphone, and a pad can switched-in to cope with high-level inputs.Included SoftwareScarlett 6i6 works with Mac, PC and iPad (using an Apple camera Connection Kit - available separately from Apple). It comes with a bundle of included software. Scarlett MixControl is a software control panel for routing the inputs and outputs, and accessing additional features on the hardware. It also comes with Ableton Live Lite: revolutionary production and performance software that can be used to record and playback audio in a totally unique way. The Scarlett Plug-in Suite is also included, supplying EQ, compression and reverb to professionalise your mixes. Features: Two award-winning Focusrite mic preamps: The best sounding interface in its class. Focusrite's 25-year underpins this new interface with two award-winning preamps High quality 24bit 96KHz audio interface for Mac, PC and iPad: 6i6 features professional conversion technology guaranteeing pristine audio quality and reliable synchronization on Mac, PC and iPad (or any iOS device) 6 inputs and 6 outputs: All of the analogue and digital inputs you need for home multi-track recording. No need for breakout cables - every analogue input & output has a dedicated socket Two headphone outputs with seperate level controls: With two headphone mixes the engineer and the artist can both listen to the mix levels they need Rugged metal unibody chassis: Whether you are in the studio or on the road your Scarlett 6i6 will not only look great, but also withstand the impacts sustained by a mobile recording rig Unique gain halos for safeguarding your levels: Unique gain halo indicators make it clear when you have a good signal for recording. When the halos are green you have a good level, and when they turn red it means you need to turn the gain down. Large main monitor control: A large main monitor control knob keeps your volume level right at your fingertips Scarlett MixControl ultra-low-latency DSP mixer and router: Scarlet MixControl Provides a 6 x 6 DSP mixer with flexible routing capabilities Two award-winning Focusrite mic preamps The best sounding interface in its class. Focusrite's 25-year underpins this new interface with two award-winning preamps High quality 24bit 96KHz audio interface for Mac, PC and iPad 6i6 features professional conversion technology guaranteeing pristine audio quality and reliable synchronization on Mac, PC and iPad (or any iOS device) 6 inputs and 6 outputs All of the analogue and digital inputs you need for home multi-track recording. No need for breakout cables - every analogue input & output has a dedicated socket Two headphone outputs with seperate level controls With two headphone mixes the engineer and the artist can both listen to the mix levels they need Rugged metal unibody chassis Whether you are in the studio or on the road your Scarlett 6i6 will not only look great, but also withstand the impacts sustained by a mobile recording rig Unique gain halos for safeguarding your levels Unique gain halo indicators make it clear when you have a good signal for recording. When the halos are green you have a good level, and when they turn red it means you need to turn the gain down. Large main monitor control A large main monitor control knob keeps your volume level right at your fingertips Scarlett MixControl ultra-low-latency DSP mixer and router Scarlet MixControl Provides a 6 x 6 DSP mixer with flexible routing capabilities, intuitive one-click presets, and lower than 1.4 ms latency Powerful software bundle Scarlett 6i6 comes with Ableton Live Lite, the Scarlett Plug-in Suite, the Novation Bass Station soft-synth and Loopmasters sample content Inputs and outputs In:Count -- Format -- Connector -- Details2 -- Mic/line/inst -- Combi XLR -- Including 2 instrument inputs2 -- Line 1/4" TRS Jack -- On rear panel2 -- S/PDIF -- RCA phono -- N/A16 -- MIDI -- 5 pin DIN connector -- Provides 16 channels of MIDI Out:4 -- Line 1/4" TRS Jack -- On rear panel (mirrored by 2 separate headphone outputs)2 -- S/PDIF -- RCA phono16 -- MIDI -- 5 pin DIN connector -- Provides 16 channels of MIDI System Requirements Mac: OS X 10.7 OS x 10.8 PC: Windows 7 (all versions) Windows 8 (all versions apart from RT)

An Easy-to-Use, Affordable USB Interface for Mobile Musicians You won't be exaggerating when you tell your friends that you've experienced U-PHORIA in your personal studio. The Behringer UM2 U-PHORIA USB audio interface offers plenty of punch, power, and value to recording enthusiasts, project studio owners, mobile musicians, and more. As a 2-in/2-out interface, the UM2 U-PHORIA is portable and streamlined, providing essential features for recording microphones and instruments: low-latency streaming of 2 inputs and 2 outputs, a phantom-power-supporting mic preamp with an XLR-1/4" combination input, USB for connectivity and power, and a second 1/4-inch instrument input for your guitar or bass. Compatibile across the board with both Mac- and Windows-based DAWs, the UM2 U-PHORIA is great for musicians on a budget. One Solid Mic Pre for Your Home Studio Work with all the microphones in your closet -- this 2-channel interface sports one of Behringer's MIDAS-designed XENYX XLR preamp with switchable +48V phantom power, allowing you to use professional-grade studio condenser mics, plus record an 1/4" instrument at the same time through the dedicated instrument input. With the UM2 as your DAW's front end, you can capture two channels at a 48 kHz sample rate. Direct Monitoring Button: Hear Yourself with Zero Latency This audio interface's Phones output provides a handy monitoring solution complete with its own Level control and Direct Monitor select. Likewise, Status, Signal, and Clip LEDs give you at-a-glance visual confirmation of where you stand with your audio. With this straight-forward interface, you can create killer mixes no matter where you work. USB Powered for Easy On-The-Go Recording When connected to a computer, every part of the UM2 U-PHORIA is powered by your computer's USB port, eliminating the need to carry around a power supply when you take your interface on the go. Tracktion Software Included: You Bring the Music, UM2 Brings the DAW Open up Behringer's UM2 U-PHORIA and get to work! The USB audio interface includes Tracktion 4 DAW software, which packs powerful tools for composing, editing, recording, mixing, and sharing original tracks. Bundled Native FX plug-ins, plus support for available third party AU, VST, and VSTi plug-ins allows you to expand Tracktion's capabilities with as many additional sounds, effects, and instruments as you like. Features: - 2x2 USB audio interface for recording microphones and instruments - 48 kHz resolution audio quality - Streams 2 inputs/2 outputs with low latency to your computer, supporting Mac OS X and Windows XP or higher - Built-in +48V-powered XENYX Mic Preamp - 1/4" instrument input - Phones output with Level control and Direct Monitor select - Status, Signal, and Clip indications for at-a-glance overview - USB port for connection and power - Compatible with major DAW software, such as Avid Pro Tools, Ableton Live, and Steinberg Cubase - Includes Tracktion 4 software plus 150 downloadable instrument/effect plug-ins - Rugged construction

An Easy-to-Use, Affordable USB Interface for Mobile Musicians You won't be exaggerating when you tell your friends that you've experienced U-PHORIA in your personal studio. The Behringer UM2 U-PHORIA USB audio interface offers plenty of punch, power, and value to recording enthusiasts, project studio owners, mobile musicians, and more. As a 2-in/2-out interface, the UM2 U-PHORIA is portable and streamlined, providing essential features for recording microphones and instruments: low-latency streaming of 2 inputs and 2 outputs, a phantom-power-supporting mic preamp with an XLR-1/4" combination input, USB for connectivity and power, and a second 1/4-inch instrument input for your guitar or bass. Compatibile across the board with both Mac- and Windows-based DAWs, the UM2 U-PHORIA is great for musicians on a budget. One Solid Mic Pre for Your Home Studio Work with all the microphones in your closet -- this 2-channel interface sports one of Behringer's MIDAS-designed XENYX XLR preamp with switchable +48V phantom power, allowing you to use professional-grade studio condenser mics, plus record an 1/4" instrument at the same time through the dedicated instrument input. With the UM2 as your DAW's front end, you can capture two channels at a 48 kHz sample rate. Direct Monitoring Button: Hear Yourself with Zero Latency This audio interface's Phones output provides a handy monitoring solution complete with its own Level control and Direct Monitor select. Likewise, Status, Signal, and Clip LEDs give you at-a-glance visual confirmation of where you stand with your audio. With this straight-forward interface, you can create killer mixes no matter where you work. USB Powered for Easy On-The-Go Recording When connected to a computer, every part of the UM2 U-PHORIA is powered by your computer's USB port, eliminating the need to carry around a power supply when you take your interface on the go. Tracktion Software Included: You Bring the Music, UM2 Brings the DAW Open up Behringer's UM2 U-PHORIA and get to work! The USB audio interface includes Tracktion 4 DAW software, which packs powerful tools for composing, editing, recording, mixing, and sharing original tracks. Bundled Native FX plug-ins, plus support for available third party AU, VST, and VSTi plug-ins allows you to expand Tracktion's capabilities with as many additional sounds, effects, and instruments as you like. Features: - 2x2 USB audio interface for recording microphones and instruments - 48 kHz resolution audio quality - Streams 2 inputs/2 outputs with low latency to your computer, supporting Mac OS X and Windows XP or higher - Built-in +48V-powered XENYX Mic Preamp - 1/4" instrument input - Phones output with Level control and Direct Monitor select - Status, Signal, and Clip indications for at-a-glance overview - USB port for connection and power - Compatible with major DAW software, such as Avid Pro Tools, Ableton Live, and Steinberg Cubase - Includes Tracktion 4 software plus 150 downloadable instrument/effect plug-ins - Rugged construction Views: 189

High-resolution desktop recording interface for use with Mac computers with onboard, realtime plug-in processing. Apollo Twin reinvents desktop recording by delivering legendary analog studio sound, feel, and flow to music creators everywhere. This 2x6 Thunderbolt audio interface for Mac combines the same impeccable 24/192 kHz audio conversion of Universal Audio's acclaimed Apollo series with onboard Realtime UAD SOLO or DUO Processing. So you can record your music in real time (at near-zero latency) through the full range of UAD plug-ins — from Neve, Studer, Manley, Lexicon, API and more* — putting racks of vintage EQs, compressors, tape machines, reverbs, and guitar amps at your fingertips. A Universal Audio breakthrough, Apollo Twin’s Unison technology gives you the tone of the world's most sought-after tube and solid state mic preamps — including their all-important impedance, gain stage “sweet spots,” and component-level circuit behaviors. Based on unprecedented hardware-software integration between Apollo’s mic preamps and its onboard UAD plug-in processing, Unison lets you record through stunning emulations like the bundled UA 610-B Tube Preamp plug-in. Apollo Twin's smart feature set includes two class-leading mic/line preamps, two analog line outputs, two digitally controlled analog monitor outputs for full resolution at all listening levels, and up to eight additional channels of digital input via Optical connection. The Twin's onboard UAD SOLO or DUO Processing lets you use UAD plug-ins both during realtime tracking and for mixing within Pro Tools, Cubase, Logic, Ableton Live and more. With its ergonomic desktop design, rugged aluminum construction, and front panel headphone and instrument connections, Apollo Twin has all the right tools, all in the right place. UAD-2 Power Built In! There are times when your computer just doesn't have the power and speed to run all the plug-ins your recording session needs. With UAD Powered Plug-ins, the processing load is taken outside of the computer and borne by UAD's super-powerful Analog Devices SHARC processors. Universal Audio's Apollo Twin interface has these SHARC processors built in and is available in SOLO (one SHARC) or DUO (two SHARCs) configurations. Features UAD-2 DUO DSP Processing onboard Desktop 2x6 Thunderbolt Mac audio interface with world-class 24-bit/192 kHz audio conversion Realtime UAD Processing for tracking through vintage-style plug-ins with near-zero latency* High-bandwidth Thunderbolt connection to modern Macs 2 premium mic/line preamps; 2 line outputs; front-panel Hi-Z instrument input and headphone output 2 digitally controlled analog monitor outputs for full resolution at all listening levels Up to 8 channels of additional digital input via Optical connection Uncompromising analog design, superior components, and premium build quality Includes "Realtime Analog Classics" UAD plug-in bundle, featuring Legacy editions of the LA-2A Classic Audio Leveler, 1176LN Limiting Amplifier, and Pultec EQP-1A Program Equalizer, plus Softube Amp Room Essentials, and more Runs UAD Powered Plug-Ins via Audio Units, VST, RTAS & AAX 64 in all major DAWs Thunderbolt cable sold separately System Requirements The host computer system must meet or exceed these requirements to use Apollo Twin Apple Mac computer with available Thunderbolt port Mac OS X 10.8 Mountain Lion or 10.9 Mavericks Internet connection to download software and authorize UAD plug-ins Compatible VST, Audio Units, RTAS, or AAX 64 plug-in host application software 2 gigabytes available disk space Views: 6