Dol

ICTE International College of Technical Education Pvt. Ltd Head Office : Office # 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 46000. Email : info@icollegete.com Contact : 051-6122937, 0311-5193625, 0092-335-4176949 OSHA stands for Occupational Safety and Health Administration. It was created out of the Occupational Safety and Health Act of 1970. Its purpose is to ensure safe working conditions for workers by setting and enforcing standards and providing training, outreach, education and assistance. OSHA certification is an official certificate of competency issued in accordance with the Occupational Safety and Health Act of 1970. It signifies that the worker has achieved and met all the requirements stipulated by OSHA.OSHA's Safety and Health Fundamentals Certificate program support's OSHA's mission by training public and private sector employees in occupational safety and health to reduce incident rates for workers. Participants have the opportunity to earn certificates for Construction, Maritime, and General Industry training.Participants can choose from a variety of topics such as occupational safety and health standards, safety and health management, incident investigation, fall hazard awareness, and recordkeeping. Courses are available at OSHA Training Institute (OTI) Education Centers nationwide.While OSHA does not specifically address training or certification requirements for workers, many OSHA standards require that the employer train employees in specific safety and health aspects of their jobs. Training is voluntary and OSHA has released guidelines for training, but these are not themselves a standard. The rule of thumb is - train your employees on what they need to know to keep themselves and others safe on the worksite. OSHA doesn't necessarily know what standards are applicable to each worksite, so determining proper training is the job of employers. OSHA Outreach Training is OSHA-authorized to provide a Department of Labor OSHA card, which can be a great baseline of training for most workers. Depending on your industry, standardized 10- and 30-Hour courses can help give all employees consistent training on the most important OSHA topics, including construction's "Focus Four" hazards and other required topics, which can then be augmented with site-specific on-the-job training. Under the Act, the Occupational Safety and Health administration (OSHA) was created within the Department of Labor.Simply stated, OSHA is the Occupational Safety and Health Administration and is responsible for worker safety and health protection.Since its inception in 1970, OSHA has cut the work-fatality rate by more than half, reduced the overall injury and illness rates in industries where OSHA has concentrated its attention, virtually eliminated brown lung disease in the textile industry and reduced trenching and excavation fatalities by 35 percent.OSHA is administered through the Department of Labor (DOL). The DOL regulates and enforces more than 180 federal laws. These mandates and the regulations that implement them cover many workplace activities for about 10 million employers and 125 million workers.Employers shall provide employees with effective information and training on hazardous chemicals in their work area at the time of their initial assignment, and whenever a new chemical hazard the employees have not previously been trained about is introduced into their work area. Information and training may be designed to cover categories of hazards (e.g., flammability, carcinogenicity) or specific chemicals. Chemical-specific information must always be available through labels and safety data sheets.

This publication provides a general overview of a variety of standardsrelated topics. This publication does not alter or determine compliance responsibilities which are set forth in OSHA standards, and the Occupational Safety and Health Act. Moreover, because interpretations and enforcement policy may change over time, for additional guidance on OSHA compliance requirements, the reader should consult current administrative interpretations and decisions by the Occupational Safety and Health Review Commission and the courts. The expectation that personnel will always apply these standards because they are part of the company’s policies and procedures is optimistic. It is necessary from time to time to revisit and examine the standards in order to both refresh and also to stimulate personnel for greater and more accurate application of the standards. This GLOMACS OSHA training course will review the major OSHA standards that are applicable to both high hazard plants as well as more general industrial (but widely applicable) standards. This GLOMACS OSHA training course will highlight: The OSHA Act OSHA's Safety and Health Program Management Guidelines Process Safety Management of Highly Hazardous Chemicals standard (29 CFR 1910.119) Permit-required Confined Spaces 19 CFR 1910.146 HazCom 2012 (29 CFR 1910.200) This 30-hour program offers a complete instruction of OSHA compliance issue training. OSHA.com recommends training programs on a job site. These programs are an orientation to occupational safety and health for employees. This 30-hour course provides information from OSHA 29 CFR 1910. OSHA.com recommends Training Program courses as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1910. Workers must receive additional training, when required by OSHA standards, on the specific hazards of the job. Upon successful completion of the course, participants will be mailed an OSHA 10-Hour General Industry DOL Wallet Card within 1-2 weeks. This course provides an overview of the important issues in Occupational Safety and Health. We will not only focus on the Occupational Safety and Health Act and its standards (or lack thereof), but on the larger political agenda of the global economy and how it impacts on the safety and health of workers around the world. The class style will be participatory, including small group discussions and activities. Related videos will supplement our class discussion. At the end of this GLOMACS OSHA training course, you will learn to: Determine the Effectiveness of Safety Management Support your recommendations for Improvement of Process Safety Management Develop Safe Systems of Work for Confined Space Entry Understand the Basis of HAZOP Studies Explain the need for review of Standard Operating Procedures Analyse Management of Change Head Office : International College Of Technical Education http://www.icollegete.com/ Office # 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 46000. Email : info@icollegete.com Contact : 051-6122937, 0311-5193625, 0092-335-4176949

This publication provides a general overview of various standards-related topics. This publication does not alter or determine the compliance responsibilities set forth in OSHA standards and the Occupational Safety and Health Act. In addition, because interpretations and enforcement policies may change over time, the reader should consult current administrative interpretations and decisions of the Occupational Safety and Health Administration and the courts for further guidance on OSHA's compliance requirements. Expecting employees to always apply these standards because they are part of company policies and procedures is optimistic. From time to time the standards need to be revised and reviewed in order to renew them and also to stimulate the staff to apply the standards more and more precisely. This GLOMACS OSHA training course will review major OSHA standards that are applicable to both high-hazard equipment and more general industry (but widely applicable) standards. This GLOMACS OSHA training course will focus on: The OSHA Act OSHA Safety and Health Program Management Guidelines Standard for Process Safety Management of Highly Hazardous Chemicals (29 CFR 1910.119) Confined spaces requiring a permit 19 CFR 1910.146 HazCom 2012 (29 CFR 1910 200) This 30-hour program offers complete OSHA compliance training instruction. OSHA.com recommends on-the-job training programs. These programs are an orientation for employees on safety and health protection at work. This 30-hour course provides information from OSHA 29 CFR 1910. OSHA.com recommends the training program courses as occupational safety and health orientation for workers covered by OSHA 29 CFR 1910. Workers must receive additional training, if required by OSHA standards, on specific work hazards. Upon successful completion of the course, participants will be mailed a 10-hour OSHA General Industry DOL Wallet Card within 1-2 weeks. This course provides an overview of important issues in the profession Safety and health protection. We will focus not only on work safety and The health law and its standards (or lack thereof), but on a larger political level agenda of the global economy and its impacts on safety and health workers around the world. The class style will be participatory, incl discussion and small group activities. Related videos will complement ours class discussion. At the end of this GLOMACS OSHA training you will learn: Determine the effectiveness of safety management Support your recommendations for improving process safety management Develop a safe system of work for confined space entry Understand the basics of HAZOP studies Explain the need to revise the Standard Operating Procedures Change management analysis Main office: International College of Technical Education http://www.icollegete.com/ Office No. 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 46,000. Email: info@icollegete.com Contact: 051-6122937, 0311-5193625, 0092-335-4176949

aThis publication provides a general overview of various standards-related topics. This publication does not alter or determine the compliance responsibilities set forth in OSHA standards and the Occupational Safety and Health Act. In addition, because interpretations and enforcement policies may change over time, the reader should consult current administrative interpretations and decisions of the Occupational Safety and Health Administration and the courts for further guidance on OSHA's compliance requirements. Expecting employees to always apply these standards because they are part of company policies and procedures is optimistic. From time to time the standards need to be revised and reviewed in order to renew them and also to stimulate the staff to apply the standards more and more precisely. This GLOMACS OSHA training course will review major OSHA standards that are applicable to both high-hazard equipment and more general industry (but widely applicable) standards. This GLOMACS OSHA training course will focus on: The OSHA Act OSHA Safety and Health Program Management Guidelines Standard for Process Safety Management of Highly Hazardous Chemicals (29 CFR 1910.119) Confined spaces requiring a permit 19 CFR 1910.146 HazCom 2012 (29 CFR 1910 200) This 30-hour program offers complete OSHA compliance training instruction. OSHA.com recommends on-the-job training programs. These programs are an orientation for employees on safety and health protection at work. This 30-hour course provides information from OSHA 29 CFR 1910. OSHA.com recommends the training program courses as occupational safety and health orientation for workers covered by OSHA 29 CFR 1910. Workers must receive additional training, if required by OSHA standards, on specific work hazards. Upon successful completion of the course, participants will be mailed a 10-hour OSHA General Industry DOL Wallet Card within 1-2 weeks. This course provides an overview of important issues in the profession Safety and health protection. We will focus not only on work safety and The health law and its standards (or lack thereof), but on a larger political level agenda of the global economy and its impacts on safety and health workers around the world. The class style will be participatory, incl discussion and small group activities. Related videos will complement ours class discussion. At the end of this GLOMACS OSHA training you will learn: Determine the effectiveness of safety management Support your recommendations for improving process safety management Develop a safe system of work for confined space entry Understand the basics of HAZOP studies Explain the need to revise the Standard Operating Procedures Change management analysis Main office: International College of Technical Education http://www.icollegete.com/ Office No. 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 46,000. Email: info@icollegete.com Contact: 051-6122937, 0311-5193625, 0092-335-4176949

This publication provides a general overview of various standards-related topics. This publication does not alter or determine the compliance responsibilities set forth in OSHA standards and the Occupational Safety and Health Act. In addition, because interpretations and enforcement policies may change over time, the reader should consult current administrative interpretations and decisions of the Occupational Safety and Health Administration and the courts for further guidance on OSHA's compliance requirements. Expecting employees to always apply these standards because they are part of company policies and procedures is optimistic. From time to time the standards need to be revised and reviewed in order to renew them and also to stimulate the staff to apply the standards more and more precisely. This GLOMACS OSHA training course will review major OSHA standards that are applicable to both high-hazard equipment and more general industry (but widely applicable) standards. This GLOMACS OSHA training course will focus on: The OSHA Act OSHA Safety and Health Program Management Guidelines Standard for Process Safety Management of Highly Hazardous Chemicals (29 CFR 1910.119) Confined spaces requiring a permit 19 CFR 1910.146 HazCom 2012 (29 CFR 1910 200) This 30-hour program offers complete OSHA compliance training instruction. OSHA.com recommends on-the-job training programs. These programs are an orientation for employees on safety and health protection at work. This 30-hour course provides information from OSHA 29 CFR 1910. OSHA.com recommends the training program courses as occupational safety and health orientation for workers covered by OSHA 29 CFR 1910. Workers must receive additional training, if required by OSHA standards, on specific work hazards. Upon successful completion of the course, participants will be mailed a 10-hour OSHA General Industry DOL Wallet Card within 1-2 weeks. This course provides an overview of important issues in the profession Safety and health protection. We will focus not only on work safety and The health law and its standards (or lack thereof), but on a larger political level agenda of the global economy and its impacts on safety and health workers around the world. The class style will be participatory, incl discussion and small group activities. Related videos will complement ours class discussion. At the end of this GLOMACS OSHA training you will learn: Determine the effectiveness of safety management Support your recommendations for improving process safety management Develop a safe system of work for confined space entry Understand the basics of HAZOP studies Explain the need to revise the Standard Operating Procedures Change management analysis Main office: International College of Technical Education http://www.icollegete.com/ Office No. 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 46,000. Email: info@icollegete.com Contact: 051-6122937, 0311-5193625, 0092-335-4176949