Cisco console cable

Cisco Console Cable RJ45-to-DB9 Color Baby Blue Import Designation Made in USA or Imported Item Weight 2.08 ounces ₨500.00http://www.refurbservers.pk/product/cisco-console-cable-rj45-to-db9/

1.8M 6 ft Cisco USB - RJ45 Console cable Connect from a USB port on your laptop directly to a Cisco console port. No adapters needed Fully capable of sending a break key sequence. Embedded FTDI chip Windows 7 and 8 will automatically install drivers, no need for additional drivers or install CDs no CD included. Drivers available for download for all versions of Windows including Windows 8, Mac OS, Linux, and Android. Connecting Point 1-CTS,2-DSR,3-RXD,4-GND,5-GND,6-TXD,7-DTR,8-RTS Support Android, Support Win 8, Win 7, XP, 2000, Linix, Mac OS Support EEPROM, support Vendor ID re-write,support Mprog3.5 Support FTDI VCP driver and D2XX driver upgrading for cisco DB9 RJ45 console cable

Compatible Device: Supports console device such as Cisco, TP-Link,Ubiquiti, Linksys,Huawei, HP ProCurve,and more; Compatible System: Windows, Mac OS, Linux, No needed driver for Windows 10/8, Mac OS.

I have CISCO Router Frame Relay Switch with following specs Rack-mountable - 1 x Motorola MHz Processor - 8 MB Flash Memory - Data Transfer Rate 10 Mbps - Data Link Protocol BSC, PPP, HDLC, SDLC, X.25, Serial, Ethernet, IBM , Frame Relay - Network / Transport Protocol SNA, SLIP, PPPoE, TCP/IP - Communication Mode Full-duplex - Remote Management Protocol SNMP, Telnet - Routing Protocol BGP, EGP, RIP, IGRP, NHRP, OSPF, EIGRP - Features IP-routing, Manageable, DHCP support, Full duplex capability, Auto-sensing per device - Compliant Standards IEEE x Serial - Synchronous - 60 pin D-Sub (DB-60) - 2 Interface - 8 x Serial - Asynchronous/synchronous - 60 pin D-Sub (DB-60) - 8 Interface - 1 x Network - ISDN BRI - RJ-45 - 1 Interface - 1 x Network - Ethernet AUI - 15 pin D-Sub (DB-15) - 1 Interface - 1 x Network - Ethernet 10Base-T - RJ-45 - 1 Interface - 1 x Management - Console - RJ-45 - 1 Interface - 1 x Management - Auxiliary - RJ-45 - 1 Interface Ideal for CCNA/CCNP/CCIE Lab preparing students and ISPs Check Warranty *Without box, Console cable and Power cable Condition: 8/10 - No Warranty

Used switch without console cable. 100% OK functional. Specs:: ports and two fixed (RJ-BASE-T uplink ports Delivers intelligent services to the network edge Enhanced Software Image (EI) installed Ideal for gigabit migration over copper backbones in the access layer. Serious buyers contact only.

Used switch without console cable. 100% OK functional. Specs:: ports and two fixed (RJ-BASE-T uplink ports Delivers intelligent services to the network edge Enhanced Software Image (EI) installed Ideal for gigabit migration over copper backbones in the access layer. Serious buyers contact only. Condition: 9/10 - No Warranty

Cisco AIR-AP1832I-H-K9 Wireless Access Point / Aironet Specifictions Software Cisco Unified Wireless Network Software Release with AireOS wireless controllers: 8.1.121.0 or later for the Cisco Aironet 1830 Series Access Points Deployment modes Centralized, standalone, sniffer, Cisco FlexConnect ™, monitor, OfficeExtend, mesh Supported wireless LAN controllers Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Cisco Catalyst ® 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco 5520 Series Wireless Controllers, Cisco Flex ®  7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco 8540 Series Wireless Controllers, Cisco 5760 Wireless LAN Controller, Cisco Catalyst 3650 and 3850 Series Switches with integrated controller Cisco Mobility Express 802.11n version 2.0 (and related) capabilities 3x3 MIMO with two spatial streams Maximal ratio combining (MRC) 20- and 40-MHz channels PHY data rates up to 300 Mbps (40 MHz with 5 GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) 802.11 dynamic frequency selection (DFS) Cyclic shift diversity (CSD) support 802.11ac Wave 1 and 2 capabilities 3x3 MIMO with two spatial streams, single-user or multiuser MIMO MRC 802.11ac beamforming (transmit beamforming) 20-, 40-, and 80-MHz channels PHY data rates up to 867 Mbps (80 MHz in 5 GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) 802.11 DFS CSD support Integrated antenna 2.4 GHz, gain 3 dBi, internal omni, horizontal beamwidth 360° 5 GHz, gain 5 dBi, internal omni, horizontal beamwidth 360° Interfaces 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE) Management console port (RJ-45) USB 2.0 (enabled via future software) Indicators Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors Dimensions (W x L x H) Access point (without mounting bracket): 8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm) Weight 3.12 lb (1.41 kg) Environmental Cisco Aironet 1830i Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) Nonoperating (storage) altitude test: 25˚C, 15,000 ft. Operating temperature: 32° to 104°F (0° to 40°C) Operating humidity: 10% to 90% (noncondensing) Operating altitude test: 40˚C, 9843 ft. System memory 1 GB DRAM 256 MB flash Input power requirements AP1830: 44 to 57 VDC Power supply and power injector: 100 to 240 VAC; 50 to 60 Hz Power draw 15.4W Note: When deployed using a PoE specification, the power drawn from the power sourcing equipment will be higher by some amount, depending on the length of the interconnecting cable. Powering options 802.3af/802.3at Enhanced PoE Cisco local power supply, AIR-PWR-C= Cisco power injector, AIR-PWRINJ5= (Note:This injector supports 802.3af only), AIR-PWRINJ6= Note: If 802.3af PoE is the source of power, the USB port is disabled. Warranty Limited lifetime hardware warranty

Cisco WS-C2960X-24TD-L Catalyst 2960-X 24 GigE, 2 x 10G SFP+,LAN Base. WS-C2960X-24TD-L  Overview Cisco Catalyst 2960X Series 24 ports LAN Base stackable switch is comprised of 24 Ethernet 10/100/1000 ports and 2 * 10G SFP+ uplink interfaces. Quick Specs Figure 1 shows the appearance of WS-C2960X-24TD-L. Table 1 shows the Quick Specs. Product Code WS-C2960X-24TD-L Enclosure Type Rack-mountable - 1U Feature Set LAN Base Uplink Interfaces 2 x 10G SFP+ Ports 24 x 10/100/1000 Ethernet Gigabit ports Available PoE Power None Maximum stacking number 8 Stack bandwidth 80G Forwarding Performance 95.2Mpps Switching Bandwidth 216Gbps RAM 512 MB Flash Memory 128 MB Dimensions 44.5cm x 27.9cm x 4.45cm Package Weight 9.19 Kg Product Details Figure 2 shows the front panel of WS-C2960X-24TD-L. Note: ① Ethernet management port                                     ⑥ SFP module ports ② Mode button                                                               ⑦ 24 x 10/100/1000 ports ③ Switch LEDs                                                               ⑧ CONSOLE LED ④ USB mini-Type B (console) port                             ⑨ MGMT LED ⑤ USB Type A ports ⑩ RJ-45 console port ·The Switch LEDs include SYST, STAT, SPEED, RPS, MAST and STACK LEDs. Figure 3 shows the back panel of the Cisco Catalyst 2960X-24TD-L switch. Note: ① FlexStack-Plus module slot and cover                  ③ RPS Connector ② Fan Exhaust                                                               ④ AC power connector Figure 4 shows the stackable capacity. This C2960X switch delivers stackable capacity that supports up to 8 switches stacking with same 2960-X LAN base series. It also can stack up to 4 switches stacking when mixed with 2960-S LAN base series switches.

Cisco Router WIC 1B S/T Rs. Key Features LAN Interfaces M Console Port Type Ethernet RJ-45 General Protocols IP, IPSec, PPP, TCP Remote Management Protocols SNMP, Telnet Expansion Slots WIC 1B S/T Ports 1 x ISDN 1 x RJ 45 1 x AUX 1 x Console Condition: - No Warranty

Cisco Multi Service ISR ROUTER Rs. Key Features Speed 90 Mbps Port Speed LAN Interfaces 100Base-TX Console Port Type Ethernet RJ-45 Condition: - No Warranty

Cisco GLC-LX-SM-RGD Compatible 1000BASE-LX/LH SFP Transceiver Module (MMF/SMF, 1310nm, 550m/10km, LC, DOM) Product Details Cisco Genuine GLC-LX-SM-RGD Vendor Name Data Quest Pakistan Form Type SFP Max Data Rate 1000Mbps Wavelength 1310nm Max Cable Distance 10km Interface LC duplex Optical Components FP 1310nm Cable Type MMF*/SMF** DOM Support Yes TX Power -9.5 ~ -3dBm Receiver Sensitivity Industrial Temperature Range -40 to 85°C (-40 to 185°F) Protocols SFF-8472 MSA Compliant, IEEE 802.3ah-2004

Cisco GLC-SX-MM Compatible 1000BASE-SX SFP Transceiver Module (MMF, 850nm, 550m, LC) Product Details Cisco Genuine GLC-SX-MM Vendor Name Data Quest Pakistan Form Type SFP Max Data Rate 1000Mbps Wavelength 850nm Max Cable Distance 550m over OM2 MMF Interface LC duplex Optical Components VCSEL 850nm Cable Type MMF DOM Support No TX Power -9.5 ~ - 3dBm Receiver Sensitivity Commercial Temperature Range 0 to 70°C (32 to 158°F) Protocols MSA Compliant, IEEE 802.3z

Cisco Genuine GLC-TE Vendor Name Data Quest Pakistan Form Type SFP Max Data Rate 1000Mbps Cable Type Cat 5 Max Cable Distance 100m Interface RJ-45 DOM Support No Commercial Temperature Range 0 to 70°C (32 to 158°F) Protocols MSA Compliant, IEEE STD 802.3 and 802.3ab

Cisco Genuine SFP-10G-LRM Vendor Name Data Quest Pakistan Form Type SFP+ Max Data Rate 10.3125Gbps Wavelength 1310nm Max Cable Distance* 220m Interface LC duplex Optical Components FP 1310nm Cable Type MMF DOM Support Yes TX Power -6.5~-0.5dBm Receiver Sensitivity Commercial Temperature Range 0 to 70°C (32 to 158°F) Protocols MSA Compliant * Minimum cabling distance for LRM modules is 2m, according to the IEEE 802.3ae.

Cisco Genuine GLC-LH-SMD Vendor Name DQ Form Type SFP Max Data Rate 1000Mbps Wavelength 1310nm Max Cable Distance 10km Interface LC duplex Optical Components FP 1310nm Cable Type MMF*/SMF** DOM Support Yes TX Power -9.5 ~ -3dBm Receiver Sensitivity Commercial Temperature Range 0 to 70°C (32 to 158°F) Protocols SFF-8472 MSA Compliant, IEEE 802.3ah-2004 Website http://www.dataquest.pk