Cisco console cable rj45

Cisco Console Cable RJ45-to-DB9 Color Baby Blue Import Designation Made in USA or Imported Item Weight 2.08 ounces ₨500.00http://www.refurbservers.pk/product/cisco-console-cable-rj45-to-db9/

1.8M 6 ft Cisco USB - RJ45 Console cable Connect from a USB port on your laptop directly to a Cisco console port. No adapters needed Fully capable of sending a break key sequence. Embedded FTDI chip Windows 7 and 8 will automatically install drivers, no need for additional drivers or install CDs no CD included. Drivers available for download for all versions of Windows including Windows 8, Mac OS, Linux, and Android. Connecting Point 1-CTS,2-DSR,3-RXD,4-GND,5-GND,6-TXD,7-DTR,8-RTS Support Android, Support Win 8, Win 7, XP, 2000, Linix, Mac OS Support EEPROM, support Vendor ID re-write,support Mprog3.5 Support FTDI VCP driver and D2XX driver upgrading for cisco DB9 RJ45 console cable

Compatible Device: Supports console device such as Cisco, TP-Link,Ubiquiti, Linksys,Huawei, HP ProCurve,and more; Compatible System: Windows, Mac OS, Linux, No needed driver for Windows 10/8, Mac OS.

I have CISCO Router Frame Relay Switch with following specs Rack-mountable - 1 x Motorola MHz Processor - 8 MB Flash Memory - Data Transfer Rate 10 Mbps - Data Link Protocol BSC, PPP, HDLC, SDLC, X.25, Serial, Ethernet, IBM , Frame Relay - Network / Transport Protocol SNA, SLIP, PPPoE, TCP/IP - Communication Mode Full-duplex - Remote Management Protocol SNMP, Telnet - Routing Protocol BGP, EGP, RIP, IGRP, NHRP, OSPF, EIGRP - Features IP-routing, Manageable, DHCP support, Full duplex capability, Auto-sensing per device - Compliant Standards IEEE x Serial - Synchronous - 60 pin D-Sub (DB-60) - 2 Interface - 8 x Serial - Asynchronous/synchronous - 60 pin D-Sub (DB-60) - 8 Interface - 1 x Network - ISDN BRI - RJ-45 - 1 Interface - 1 x Network - Ethernet AUI - 15 pin D-Sub (DB-15) - 1 Interface - 1 x Network - Ethernet 10Base-T - RJ-45 - 1 Interface - 1 x Management - Console - RJ-45 - 1 Interface - 1 x Management - Auxiliary - RJ-45 - 1 Interface Ideal for CCNA/CCNP/CCIE Lab preparing students and ISPs Check Warranty *Without box, Console cable and Power cable Condition: 8/10 - No Warranty

Used switch without console cable. 100% OK functional. Specs:: ports and two fixed (RJ-BASE-T uplink ports Delivers intelligent services to the network edge Enhanced Software Image (EI) installed Ideal for gigabit migration over copper backbones in the access layer. Serious buyers contact only.

Used switch without console cable. 100% OK functional. Specs:: ports and two fixed (RJ-BASE-T uplink ports Delivers intelligent services to the network edge Enhanced Software Image (EI) installed Ideal for gigabit migration over copper backbones in the access layer. Serious buyers contact only. Condition: 9/10 - No Warranty

Cisco AIR-AP1832I-H-K9 Wireless Access Point / Aironet Specifictions Software Cisco Unified Wireless Network Software Release with AireOS wireless controllers: 8.1.121.0 or later for the Cisco Aironet 1830 Series Access Points Deployment modes Centralized, standalone, sniffer, Cisco FlexConnect ™, monitor, OfficeExtend, mesh Supported wireless LAN controllers Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Cisco Catalyst ® 6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco 5520 Series Wireless Controllers, Cisco Flex ®  7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco 8540 Series Wireless Controllers, Cisco 5760 Wireless LAN Controller, Cisco Catalyst 3650 and 3850 Series Switches with integrated controller Cisco Mobility Express 802.11n version 2.0 (and related) capabilities 3x3 MIMO with two spatial streams Maximal ratio combining (MRC) 20- and 40-MHz channels PHY data rates up to 300 Mbps (40 MHz with 5 GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) 802.11 dynamic frequency selection (DFS) Cyclic shift diversity (CSD) support 802.11ac Wave 1 and 2 capabilities 3x3 MIMO with two spatial streams, single-user or multiuser MIMO MRC 802.11ac beamforming (transmit beamforming) 20-, 40-, and 80-MHz channels PHY data rates up to 867 Mbps (80 MHz in 5 GHz) Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) 802.11 DFS CSD support Integrated antenna 2.4 GHz, gain 3 dBi, internal omni, horizontal beamwidth 360° 5 GHz, gain 5 dBi, internal omni, horizontal beamwidth 360° Interfaces 1 x 10/100/1000BASE-T autosensing (RJ-45), Power over Ethernet (PoE) Management console port (RJ-45) USB 2.0 (enabled via future software) Indicators Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors Dimensions (W x L x H) Access point (without mounting bracket): 8.3 x 8.3 x 2 in. (210.8 x 210.8 x 50.8 mm) Weight 3.12 lb (1.41 kg) Environmental Cisco Aironet 1830i Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) Nonoperating (storage) altitude test: 25˚C, 15,000 ft. Operating temperature: 32° to 104°F (0° to 40°C) Operating humidity: 10% to 90% (noncondensing) Operating altitude test: 40˚C, 9843 ft. System memory 1 GB DRAM 256 MB flash Input power requirements AP1830: 44 to 57 VDC Power supply and power injector: 100 to 240 VAC; 50 to 60 Hz Power draw 15.4W Note: When deployed using a PoE specification, the power drawn from the power sourcing equipment will be higher by some amount, depending on the length of the interconnecting cable. Powering options 802.3af/802.3at Enhanced PoE Cisco local power supply, AIR-PWR-C= Cisco power injector, AIR-PWRINJ5= (Note:This injector supports 802.3af only), AIR-PWRINJ6= Note: If 802.3af PoE is the source of power, the USB port is disabled. Warranty Limited lifetime hardware warranty

Seller Type: A Professional / Business Condition: New Black Copper Cat 5e Cable Roll Pure Copper (305 Meter) Colour White. Product Information: Category 5e FTP Reel Cable - Pure Copper High Quality Double Insulation External/Outdoor Grade Please note - This cable is not supplied with a reel when a length shorter than 305m is purchased. All shorter lengths are cut from the reel, rolled and cable tied. Uses - This cable is commonly used for networking and AV installations. It can be cut to length and fitted with 8P8C FTP connectors (also called RJ45/CAT5e FTP), the standard PC networking connector. If you plan to fit these yourself, you will also need a CAT5 crimping tool, which we also supply. The cable has a foil shield which helps in areas where there is a lot of interference, to make sure the shield is utilised, please make sure your RJ45 sockets are shielded too. Made From - Pure copper conductors, this cable has been tested and is certified to CAT5e specification so is fine for use over longer distances. Colour - White Ease of Use - To make measuring easy the cable is marked at 1 metre intervals. Technical Features; Conductor Make-up: mm Conductor Area CSA:0.2mm² (24 AWG) No. of Cores: 8 Quality CAT5e 4 pair network cable Shielded Twisted Pair (FTP) Suitable for up to Mbps Wiring – Depending on the application in which you hope to use it, the cable can be wired in both the ‘straight through’ or ‘cross-over’ configurations. 'Cross over' cables are usually used for connecting 2 computers directly to one another, without the use of a Hub or Router. They use 568-A wiring at one end, and 568-B at the other. 'Straight through' cables can be used for connecting a PC or games console to a Hub/Router, or, in conjunction with AV extender devices, for audio and video distribution throughout a home or commercial project. To create a 'straight through' cable, it should be wired using the same wiring variant at both ends. Either ‘568-A to 568-A’ or ‘568-B to 568-B’ Variants – The 2 wiring configurations for CAT5/CAT6 cable. TIA/EIA-568-A & TIA/EIA-568-B. have no technical differences between them. However, they connect the wires to the connector in a different order, as shown in the wiring diagram above.

Description: Details iShopping.pk brings you the best price for TP-Link JetStream 24-Port Gigabit L2 Managed Switch with 4 SFP Slots (TL-SG3428-V1) with express shipping all over Pakistan.   Details: Full Gigabit Ports: 24× gigabit RJ45 ports and 4× gigabit SFP Slots provide high-speed connections. Integrated into Omada SDN: Zero-Touch Provisioning (ZTP)*, Centralized Cloud Management, and Intelligent Monitoring. Centralized Management: Cloud access and Omada app for ultra-convenience and easy management. Static Routing: Helps route internal traffic for more efficient use of network resources. Robust Security Strategies: IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm control, DHCP Snooping, 802.1X, Radius Authentication, and more. Optimize Voice and Video Applications: L2/L3/L4 QoS and IGMP snooping. Standalone Management: Web, CLI (Console Port, Telnet, SSH), SNMP, RMON, and Dual Image bring powerful management capabilities Software Defined Networking (SDN) with Cloud Access Omada’s Software Defined Networking (SDN) platform integrates network devices, including access points, switches and gateways, providing 100% centralized cloud management. Omada creates a highly scalable network—all controlled from a single interface. Seamless wireless and wired connections are provided, ideal for use in hospitality, education, retail, offices, and more. Secure Networking Security features include IP-MAC-Port-VID Binding, Port Security, Storm Control, and DHCP Snooping to defend against a range of network threats. An integrated list of common DoS attacks is available, making it easier than ever to prevent them. In addition, the Access Control Lists (ACL, L2 to L4) feature restricts access to sensitive network resources by denying packets based on source and destination MAC address, IP address, TCP/UDP ports, or VLAN ID. Users’ network access can be controlled via 802.1X authentication, which works with a RADIUS/Tacacs+ server to grant access only when valid user credentials are provided. Advanced QoS Voice and video traffic can be prioritized based on IP address, MAC address, TCP port number, UDP port number, and more. With QoS (Quality of Service), voice and video services remain smooth, even when bandwidth is in short supply. Abundant L2 and L2+ Features A complete lineup of L2 features are supported including 802.1Q VLAN, Port Mirroring, STP/RSTP/MSTP, Link Aggregation Control Protocol, and 802.3x Flow Control. Advanced IGMP Snooping ensures the switch intelligently forwards multicast streams to only the appropriate subscribers, cutting out unnecessary traffic, while IGMP throttling & filtering restrict each subscriber on a port level to prevent unauthorized multicast access. Static Routing is a simple way of segmenting the network and internally routs traffic through the switch for improved efficiency. ISP Features QinQ, L2PT, PPPoE ID Insertion, and IGMP authentication features are provided, developed with service providers in mind. 802.3ah OAM and Device Link Detection Protocol (DLDP) offer easy monitoring and troubleshooting of Ethernet links. IPv6 Support IPv6 functions such as Dual IPv4/IPv6 Stack, MLD Snooping, IPv6 ACL, DHCPv6 Snooping, IPv6 Interface, Path Maximum Transmission Unit (PMTU) Discovery and IPv6 Neighbor Discover guarantee your network is ready for the Next Generation Network (NGN) without upgrading your hardware. Enterprise Level Management Features Easy to manage via an intuitive web-based Graphical User Interface (GUI) or an industry-standard Command Line Interface (CLI). For both management methods, traffic is protected through SSL or SSH encryption. SNMP (v1/v2c/v3) and RMON support enables the switch to be polled for valuable status information and to send traps on abnormal events.   Specifications: HARDWARE FEATURES Interface • 24× 10/100/1000 Mbps RJ45 Ports • 4× Gigabit SFP Slots • 1× RJ45 Console Port • 1× Micro-USB Console Port Fan Quantity Fanless Power Supply 100-240 V AC~50/60 Hz Dimensions (W x D x H) 17.3 × 7.1 × 1.7 in (440 × 180 × 44 mm) Mounting Rack Mountable Max Power Consumption 19.22 W (110 V/60 Hz) Max Heat Dissipation 65.58 BTU/h (110 V/60 Hz) PERFORMANCE Switching Capacity 56 Gbps Packet Forwarding Rate 41.66 Mpps MAC Address Table 8K Jumbo Frame 9 KB SOFTWARE FEATURES Quality of Service • 8 priority queues • 802.1p CoS/DSCP priority • Queue scheduling - SP (Strict Priority) - WRR (Weighted Round Robin) - SP+WRR • Bandwidth Control - Port/Flow based Rating Limiting • Smoother Performance • Action for Flows - Mirror (to supported interface) - Redirect (to supported interface) - Rate Limit - QoS Remark L2 and L2+ Features • Link Aggregation - Static link aggregation - 802.3ad LACP - Up to 8 aggregation groups and up to 8 ports per group • Spanning Tree Protocol - 802.1d STP - 802.1w RSTP - 802.1s MSTP - STP Security: TC Protect, BPDU Filter, BPDU Protect, Root Protect, Loop Protect • Loopback Detection - Port-based - VLAN based • Flow Control - 802.3x Flow Control - HOL Blocking Prevention • Mirroring - Port Mirroring - CPU Mirroring - One-to-One - Many-to-One - Tx/Rx/Both L2 Multicast • Supports 511 (IPv4, IPv6) IGMP groups • IGMP Snooping - IGMP v1/v2/v3 Snooping - Fast Leave - IGMP Snooping Querier - IGMP Authentication • IGMP Authentication • MVR • MLD Snooping - MLD v1/v2 Snooping - Fast Leave - MLD Snooping Querier - Static Group Config - Limited IP Multicast • Multicast Filtering: 256 profiles and 16 entries per profile VLAN • VLAN Group - Max 4K VLAN Groups • 802.1q Tagged VLAN • MAC VLAN: 12 Entries • Protocol VLAN: Protocol Template 16, Protocol VLAN 16 • GVRP • VLAN VPN (QinQ) - Port-Based QinQ - Selective QinQ • Voice VLAN Access Control List • Time-based ACL • MAC ACL - Source MAC - Destination MAC - VLAN ID - User Priority - Ether Type • IP ACL - Source IP - Destination IP - Fragment - IP Protocol - TCP Flag - TCP/UDP Port - DSCP/IP TOS - User Priority • Combined ACL • Packet Content ACL • IPv6 ACL • Policy - Mirroring - Redirect - Rate Limit - QoS Remark • ACL apply to Port/VLAN Security • IP-MAC-Port Binding - DHCP Snooping - ARP Inspection - IPv4 Source Guard • IPv6-MAC-Port Binding - DHCPv6 Snooping - ND Detection - IPv6 Source Guard • DoS Defend • Static/Dynamic Port Security - Up to 64 MAC addresses per port • Broadcast/Multicast/Unicast Storm Control - kbps/ratio/pps control mode • IP/Port/MAC based access control • 802.1X - Port based authentication - Mac based authentication - VLAN Assignment - MAB - Guest VLAN - Support Radius authentication and accountability • AAA (including TACACS+) • Port Isolation • Secure web management through HTTPS with SSLv3/TLS 1.2 • Secure Command Line Interface (CLI) management with SSHv1/SSHv2 IPv6 • IPv6 Dual IPv4/IPv6 • Multicast Listener Discovery (MLD) Snooping • IPv6 ACL • IPv6 Interface • Static IPv6 Routing • IPv6 neighbor discovery (ND) • Path maximum transmission unit (MTU) discovery • Internet Control Message Protocol (ICMP) version 6 • TCPv6/UDPv6 • IPv6 applications - DHCPv6 Client - Ping6 - Tracert6 - Telnet (v6) - IPv6 SNMP - IPv6 SSH - IPv6 SSL - Http/Https - IPv6 TFTP L3 Features • 16 IPv4/IPv6 Interfaces • Static Routing - 48 static routes • Static ARP • 316 ARP Entries • Proxy ARP • Gratuitous ARP • DHCP Server • DHCP Relay • DHCP L2 Relay Management • Web-based GUI • Command Line Interface (CLI) through console port, telnet • SNMPv1/v2c/v3 - Trap/Inform - RMON (1, 2, 3, 9 groups) • SDM Template • DHCP/BOOTP Client • 802.1ab LLDP/LLDP-MED • DHCP AutoInstall • Dual Image, Dual Configuration • CPU Monitoring • Cable Diagnostics • EEE • Password Recovery • SNTP • System Log Advanced Features • Support Omada Hardware Controller (OC200/OC300), Software Controller, Cloud-Based Controller • Automatic Device Discovery • Batch Configuration • Batch Firmware Upgrading • Intelligent Network Monitoring • Abnormal Event Warnings • Unified Configuration • Reboot Schedule • ZTP (Zero-Touch Provisioning)* OTHERS Certification CE, FCC, RoHS Environment • Operating Temperature: 0–45 ℃ (32–113 ℉); • Storage Temperature: -40–70 ℃ (-40–158 ℉) • Operating Humidity: 10–90% RH non-condensing • Storage Humidity: 5–90% RH non-condensing

The TP-Link TL-R488T Load Balancing Router features four WAN ports, which allows four connections to the Internet at the same time, provides you with quad-bandwidth access, and gives you the ability to enjoy more Internet sources from different ISPs. With fail-over and automatic load balancing, no manual work should ever be required. Key Features Shares data and Internet access for Stations, connecting Internet through PPPoE on demand and disconnecting when idle Supports TCP/IP, PPPoE, DHCP, ICMP, NAT, SNTP Provides quad-bandwidth and supports Load Balancing Backups connections automatically for each other Specifies priority channels according to source or destination IP addresses, distributing flexibly Internet resource and services from different ISPs Built-in NAT and DHCP server supporting static IP address distributing Built-in firewall supporting IP address filtering, Domain Name filtering, and MAC address filtering Supports Virtual Server, Special Application, and DMZ host Supports UPnP, Static Routing, VPN pass-through Supports connecting/disconnecting Internet on a specified time of day Supports access control based on time of day, parents and network administrators can establish restricted access policies for children or staff Supports Flow Statistics Supports ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filter Supports web-based firmware upgrade Supports Remote and Web management Desktop or rack-mountable steel case Quad-WAN for Multiple ISP Support The TP-Link TL-R488T features four WAN ports, which allow four connections to the Internet at the same time, provides you quadruple-bandwidth access, and gives the ability to enjoy more Internet sources from different ISPs. ISP server addresses can be added by hand and support direct introduction of text format of address table. Lines of the same ISP divert automatically. The internal automatic line diversion strategy can distribute data streams according to the bandwidth proportion and occupancy rate to raise the utilization rate of dual-line broadband. Enhanced Features & Intel IXP Processors The TP-Link TL-R488T incorporates the Intel IXP network range of processors, with a main frequency up to 533MHz and a multi-CPU distributed architecture to ensure high performance and high availability. The 6-layer PCB, the built-in high-redundancy power module features a new architecture that dramatically stretches the performance of the router and ensures a stable connection. Additionally, the TP-Link TL-R488T provides all normal settings of broadband router, it features much more advanced functions, such as Port Mirror, Port VLAN, UPnP, VPN Pass-through, Firewall and System Log. Easy to Use and Setup The TP-Link TL-R488T Load Balancing Router provides a friendly configuration interface for easy use. With multiple functions, high-reliability, and high-security, it is ideal for SMB (Small and Medium Business), Internet cafe, broadband community, and school network use. SPECIFICATIONS Software Specification Standards and Protocols IEEE u, z, ab, x, x, TCP/IP, DHCP, ICMP, NAT, PPPoE, SNTP, HTTP, DNS Basic Function DHCP Server DHCP Client MAC Address Modify/Clone VPN Pass-through Static Routing Dynamic DNS QoS IP-Based QoS Port Bandwidth Control IP Connection Session Control IP Bandwidth Control Connection Session List Port Settings Flow Statistics LAN and WAN Port Setting Forwarding Rules Virtual Server Special Application Static Routing DMZ Host UPnP Firewall Function Firewall Rules Setting MAC Address Filtering Domain Name Filtering IP/MAC Address Binding Ignore Ping Packet From WAN Port DoS Protection Scan Protection IP Packets Containing Options Suspicious Package Detection System Function Remote Management System Log Configuration File Uploading and Downloading Web Upgrade HTTPS Configuration New Dual-WAN Function Flow Statistics WAN Load Balancing Bandwidth Occupancy WAN IP Tracing WAN Bandwidth Percentage Display LAN IP Statistics Detecting Online ICMP Detecting DNS Detecting TCP Connecting Test Hardware Specification Intel IXP Network Processor, Multi-CPU distributed processing, main frequency up to 533MHz Ports LAN M Auto-Negotiation RJ45 ports (Auto MDI/MDIX) WAN M Auto-Negotiation RJ45 ports (Auto MDI/MDIX) 1 Console (RS232 DB9 Male) Network Media 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-¦¸ STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-¦¸ STP (maximum 100m) LED Indicators LAN/WAN Link/Act, 100Mbps Else Power, M1, M2 Dimensions(W*D*H) in.( mm) Environment Operating Temperature: ¨H~104¨H) Storage Temperature: -¨H~158¨H) Operating Humidity: % non-condensing Storage Humidity: 5%~90% non-condensing Power and Consumption Input: VAC; Hz Consumption: 4.1W (Max) Box Pack- Warranty: 8 Months

Price: Seller Type: An Individual Condition: New Google Android 4.0 TV Box ARM Cortex A9 HDMI HD P WIFI Internet Set-Top This Android 4.0 ARM Cortex A9 TV box enables many applications including web browser, android market, 2D/3D games, MSN/QQ/Skype instant messaging, email and so on. Supports high speed of wi-fi for network applications, supports 2.4GHz wireless mouse, keyboard and flying remotes, supports full HD p video decoding and output, including three HD formats: VC-1, H.264, MPEG2-HD. This Android TV box ia a multimedia player and home multimedia center which is the best way for you to enjoy network life. Features: Support Android 4.0 operating system with ARM Cortex A9. Support many IPTV(Interactive Personality TV)programmes to connect with your own website. Support three main HD formats: VC-1, H.264, MPEG-2 and many others normal formats such as MPEG-1, MPEG-2, MPEG-4, DIVX, REALMEDIA and so on. Video formats include avi, mpg, vob, rmvb, mkv, m2ts, ts Photo formats include JPEG, BMP, and PNG without size limitation. Audio formats include MP3, WMA, WAV, DTS, AAC and so Support SD/MCC cards. Support Four USB2.0 host connectors with maximum output current of 1.5A/5V. Support standard RJ45 cable network and wireless network connection. Support infrared remote controller operation. With 3D Acceleration Engine you can enjoy the dynamic world of 3D games and 3D videos. It is a perfect combination of HD media player, computer, digital photo frame, game console, and Internet set-top-box. CPU: ARM Cortex AMHz Operation System: Android 4.0 User Interface: Android System User Interface Style Memory DDRMB Storage NAND flash: 4GB Support External Hard Disk Drives 10 GB to 2 TB Firmware Upgrade: Upgrade from SD card Network WIFI wireless network connection Rj45 network connection interface Adobe Flash Player:Adobe Flash Player 10.3 Softwares Android market, Browser, Online video, music, picture, Office softwares (Word, Execel, Pdf), communications software (QQ, MSN, SKYPE), E-mail, 2D/3D games and other software applications. GPU Mali-400 GPU (3D Acceleration Engine) File systemFAT16?FAT32, NTFSVideo FormatMPEG1/2/4: up to ; H.264: up to ; VC-1/WMV: up to ; RealVideo : up to , including dat, avi, mpg, mpeg, mkv, rm, rmvb, vob, ts, m2ts, mp4 suffixes and so on. Audio Forma tMP3, WMA, MIDI, WAV, OGG, APE, AAC, MPEG, DTSImage FormatJPEG?BMP?GIF?PNG?TIFF Support Languages Simplified Chinese, English, Traditional Chinese, Spanish, French, German, Italian, Dutch, Hebrew, Arabic, etc. (About 20 languages) Remote control distance: Valide distance more than 6 meters

Description: Details iShopping.pk brings you the best price for TP-Link AC2600 Wi-Fi Range Extender (RE650) with official warranty and express shipping all over Pakistan.     Features: • Superior Extended Range – Four fixed external antennas extend Wi-Fi coverage by up to 14,000 sq. ft. •  4-Stream for AC2600 Dual Band Wi-Fi – Simultaneous 800Mbps on 2.4GHz + 1733Mbps on 5GHz •  4×4 MU-MIMO – Simultaneously transfers data to multiple devices for 4x faster •  B eamforming Technology – Send targeted Wi-Fi signal to individual devices for stronger connections •  Gigabit Ethernet Port – Provide faster wired connections to smart TVs, computers and gaming consoles •  Intelligent Signal Light – Helps to determine the best location for optimal Wi-Fi coverage by indicating the signal strength in the current placement •  AP Mode – create a new Wi-Fi access point to enhance your wired network with Wi-Fi capability •  TP-LINK Tether App – Easily access and manage your network using any iOS or Android mobile device •  Ultimate Compatibility – Extend the range of any Wi-Fi router or wireless access point        Specification: HARDWARE Plug Type US Standards and Protocols IEEE802.11ac, IEEE 802.11n, IEEE 802.11g, IEEE 802.11b, IEEE 802.11a Interface 1x 10/100/1000M Ethernet Port (RJ45) Button WPS Button, Reset Button, LED Button, Power Button Power Consumption 12W（max power consumption） Antenna 4x external Dimensions (W x D x H) 6.4x 3.4 x 1.6 in. (163 x 86 x 40mm) WIRELESS Frequency 2.4GHz & 5GHz(11ac) Signal Rate 5GHz:Up to 1733Mbps 2.4GHz:Up to 800Mpbs  Reception Sensitivity 5GHz： 11a 6Mbps:-96dBm@10% PER 11a 54Mbps: -78dBm@10% PER 11ac HT20 mcs8: -69dBm@10% PER 11ac HT40 mcs9: -66dBm@10% PER 11ac HT80 mcs9: -63dBm@10% PER 2.4GHz 11g 54M: -79dBm@10% PER 11n HT20 mcs7: -77dBm@10% PER 11n HT40 mcs7: -74dBm@10% PER  Wireless Modes Range Extender/Access Point Wireless Functions Wireless Statistic Concurrent Mode boost both 2.4G/5G WiFi band High Speed Mode for great speed for HD Gaming and video Access Control LED Control Domain Login Function  Wireless Security 64/128-bit WEP WPA-PSK / WPA2-PSK  Transmission Power OTHERS Certification FCC, RoHS Box Dimensions (W X D X H) 7.9 x 4.9 x 3.8in. (202x 125 x 97mm) System Requirements Microsoft® Windows® 98SE, NT, 2000, XP, Vista or Windows 7, 8, 10, Mac® OS, NetWare®, UNIX® or Linux. Environment Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing    Far Reaching Wi-Fi and Powerful Performance Powerful Quad-Antenna design with Beamforming delivers highly targeted Wi-Fi connections to improve throughput and signal quality for stronger Wi-Fi across your home, while extending your routers coverage by 14,000 square feet*. The Intelligent Processing Engine balances the demands of your devices to keep their connections fast and uninterrupted, sending Wi-Fi traffic to dedicated processors while the powerful dual-core CPU handles the rest.   4-Stream AC2600 Dual Band Wi-Fi Using 4-Stream and TurboQAM technology to boost its Wi-Fibandwidth, the RE650 reaches industry leading maximum speeds of up to 800 Mbps on 2.4GHz and 1733 Mbps on 5GHz. This provides the performance necessary to support your most demanding online applications, including 4K streaming and gaming.   More Connections and Faster for Everyone MU-MIMO technology allows the RE650 to serve up to four devices at once, reducing wait time and greatly increasing Wi-Fi throughput for every device. With MU-MIMO, the RE650 runs up to 4x faster than traditional AC range extender.   Traditional RE Sends data to one device at a time   MU-MIMO RE650 Simultaneously sends data to multiple devices   High-Speed Gigabit Wired Connection The RE650’s Gigabit Ethernet port lets you connect a wired device such as a game console or smart TV to create a fast, reliable wired connection.   Find the Best Spot with Intelligent Signal Indicator The Intelligent Signal Light helps you quickly find the  best location to install the RE650.   Built-In Access Point Mode RE650 is more than a wireless range extender. Simply plug an Ethernet cable into its Ethernet port, and easily turn your wired internet connection into a 4×4 MU-MIMO dual band wireless access point.   Drop-Free and Seamless Dual Band Connections If one of the main router's dual bands drops suddenly, or in case the main router can only deliver single band, the RE650 still provides stable dual-band connections for clients, allowing you to enjoy stable and drop-free experience on all your devices.   Easy Monitoring and Control TP-Link Tether is an intuitive app that allows users to conveniently monitor the state of your range extender, controlling its functions and altering its settings from any compatible mobile device.