Cardio power capsule

Type Studio Microphone Product Description Large-capsule condenser microphone. The Nova large-capsule condenser microphone from M-Audio® combines low-noise Class A electronics and an evaporated-gold diaphragm over one inch in diameter to achieve low-noise, high-fidelity recording, Nova ensures recordings that are faithful to the original source and free from distortion or unwanted coloration of the sound. The solid brass body and capsule offer protection and reliability. A hard mount and soft case are provided. Features 1.1" Diameter evaporated gold diaphragm > offers smooth, accurate sound Cardioid pickup pattern > easy to isolate from unwanted studio sounds Class A solid-state electronics > designed for low noise and minimal coloration Solid brass body and capsule > delivers protection and reliability Complete ready-to-use package > Includes hard mount, soft case, and XLR cable NOVA Specifications: Type: Large diaphragm condenser, gold evaporated Polar pattern: Cardioid Frequency response: 20Hz-18kHz Sensitivity: 16mV/Pa (-36dBV) Max. SPL for 0.5% THD: 128dB Equivalent noise level: 14dB-A weighted Output impedance: 200 ohms Recommended load impedance: > ohms Preamp topology: Class A FET preamp Power requirement: 48V phantom power Connector: 3-pin male XLR Grille and Body: Wire mesh grille and body, all brass Finishing: Nickel silver plating Size/weight: 7.3"H x 1.9"W/ 23oz

Type Studio Microphone Product Description A multi-pattern dual 1" condenser microphone. The NT2-A carries on the tradition forged by the now legendary RØDE NT2 with a professional large capsule (1") studio microphone incorporating three-position pick-up patterns, PAD and high-pass filter switches conveniently located on the mic body. At the heart of the NT2-A is the Australian-designed and manufactured HF1 dual diaphragm capsule. The frequency and transient response of this transducer has been voiced to complement today's modern recording techniques, and yet still evoke the silky smooth character of the legendary microphones of the 50s and 60s. These features provide the flexibility and superlative audio characteristics that make the NT2-A one of the most versatile condenser mics available. This Bundle version also includes the SM6 shockmount with detachable pop filter - a high-quality suspension shockmount. It provides isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. It also includes a removable pop shield with two axis of adjustment and a telescopic arm for ultimate application versatility, 6m of XLR cable, and a dust cover. Features Large 1” gold sputtered capsule On-body control of polar pattern, HPF and PAD Three-position variable polar pattern - Omni, Cardioid or Figure 8 Three-position variable High-Pass Filter - Flat, 40Hz or 80Hz Three-position PAD - 0dB, -5dB or -10dB Ultra low noise, transformerless surface mount circuitry Wide, dynamic range Internal capsule shockmounting Made in Australia Full 1-year warranty Includes SM6 shockmount with detachable pop filter, 6m of XLR cable, and a dust cover NT2-A Studio Condenser Microphone Bundle Specifications: NT2-A Condenser Microphone Acoustic Principle: Pressure Gradient Active Electronics: JFET impedance converter with bipolar output buffer Capsule: 1.00" Polar Pattern: cardioid, Omni, figure 8 Address Type: Side Frequency Range: 20Hz - 20kHz Output Impedance: 200Ω Maximum SPL147dB SPL (@ 1kHz, 1% THD into 1KΩ load) Maximum Output Level: 16.0dBu (@ 1kHz, 1% THD into 1KΩ load) Sensitivity-36.0dB re 1 Volt/Pascal (mV @ 94dB SPL) +/- 2 dB @ 1kHz Power Options: +48V phantom power required from mixer or interface; +24V phantom power required from mixer or interface Weight: gm Dimensions: mmH x mm W x mm D Output: XLR SM6 Weight: gm Dimensions (HxWxD): 210mm x 133mm x 210mm

Overview Vocal Studio Pro is the all-in-one solution for your computer-recording projects. Lay down vocals on your latest tune. Narrate your next podcast. Add a voice-over to your multimedia production. Vocal Studio Pro does it all. The unique combination of high-performance hardware and easy-to-use software makes it possible. Simply plug the microphone into the interface, connect the interface to the computer, put on the headphones, and you're ready. Completing this powerful package are two complementary software selections: Avid® Pro Tools® Express and Ignite by AIR, the all-new music creation software. Together, they deliver a comprehensive path for transforming the ideas in your head into musical works and ideas you can share with the world. Package Contents: M-Audio M-Track Interface M-Audio large diaphragm vocal microphone M-Audio studio headphones Avid Pro Tools Express with iLok USB key Ignite by Air (Download) Mic clip XLR microphone cable USB cable User Guides Safety & Warranty Manual Achieve Accurate Audio Recordings Breathe new life into your recordings with this large-capsule M-Audio microphone. Combining low-noise electronics and high sensitivity, this microphone ensures recordings that are faithful to the original source and free from distortion or unwanted coloration of the sound. The rugged metal body and capsule offers protection and reliability. Expandable Interface M-Track opens the door to enhanced computer-based music making. In addition to providing a superb sounding XLR connection—complete with phantom power—for your M-Audio microphone, M-Track offers the right connections for any audio source or instrument—even an electric guitar! Insert jacks allow you to incorporate your favorite effects. The low-profile design delivers professional control in a portable package. Pro Tools Express Compose, record, edit, and mix using the tools the professionals use. Pro Tools Express starts with 16 simultaneous stereo or mono audio tracks. Add in the popular Boom, Xpand!2, and Structure Free player virtual instruments from AIR Music Technology-all included. Finish off with dozens of high-powered effect plug-ins, including the in-demand AIR effects. Plus, Pro Tools Express offers session file compatibility with the entire Pro Tools family, so you can take your tracks to the finest studios around the world. Pro Tools Express includes an iLok 2 USB key-a Ignite Ignite provides a refreshingly original and musician-centric way to quickly capture, combine, and arrange your musical ideas. The intuitive graphic interface encourages you to experiment and explore new directions. Smart MIDI Chord and Phrase Players empower your ideas and bring them to life through over 275 superior instruments sounds created by AIR Music Technology. When you're ready to collaborate with other musicians or take your ideas to the next level, you can share them through SoundCloud, or export your WAV, MP3 and MIDI files and import them into Pro Tools-or any DAW software. Best of all, Ignite offers seamless integration with your M-Audio keyboard controller, with no set-up chores to perform. Avid, the Avid logo and Pro Tools are trademarks or registered trademarks of Avid Technology, Inc. in the U.S. and other countries Features M-Audio Large Capsule Condenser Microphone Top quality back electret condenser transducer High sensitivity and low self noise Built-in pre-amplifier circuitry for unrivalled sound performance Wide frequency response range LED power indicator Transducer Principle: Back Electret Condenser Directivity Characteristic: Cardioid Frequency Response: 30Hz-20kHz Sensitivity: -38dB±2dB (0dB=1V/Pa at 1kHz) Output Impedance: % (at 1kHz) Load Impedance: ≥Ω Equivalent Noise Level: ≤22dB A (IEC ) Max. Input SPL: 140dB (THD ≤1.0ï¼… at 1kHz) Power Requirements: 48V DC Phantom Power Body Dimensions: Ø54 x 128mm Net Weight: 371g

Type Studio Microphone Product Description Designed for home-studio owners and musicians. The Behringer B-1 Large-Diaphragm Cardioid Condenser Mic employs a 1" capsule to capture sound with incredible realism and sensitivity. Its wide frequency response from 20Hz-20kHz is enhanced by a pronounced presence boost, making EQing unnecessary in many cases. The cardioid polar pattern, switchable high-pass filter, -10dB pad, 148dB SPL capability, and low self-noise make it perfect for close miking. Requires 48V phantom power. The Behringer B-1 Mic includes a carrying case, shock mount, and windscreen. Features 1" capsule 20Hz-20kHz frequency range enhanced by a pronounced presence boost Cardioid polar pattern Switchable high-pass filter (-6dB/octave at 75Hz) -10dB pad Low-cut filter -6dB/octave @ 75Hz (switchable) SPL of 148dB Low self-noise Perfect for close miking Requires 48V phantom power

Product Description Designed for home-studio owners and musicians. The Behringer B-1 Large-Diaphragm Cardioid Condenser Mic employs a 1" capsule to capture sound with incredible realism and sensitivity. Its wide frequency response from 20Hz-20kHz is enhanced by a pronounced presence boost, making EQing unnecessary in many cases. The cardioid polar pattern, switchable high-pass filter, -10dB pad, 148dB SPL capability, and low self-noise make it perfect for close miking. Requires 48V phantom power. The Behringer B-1 Mic includes a carrying case, shock mount, and windscreen. Features 1" capsule 20Hz-20kHz frequency range enhanced by a pronounced presence boost Cardioid polar pattern Switchable high-pass filter (-6dB/octave at 75Hz) -10dB pad Low-cut filter -6dB/octave 75Hz (switchable) SPL of 148dB Low self-noise Perfect for close miking Requires 48V phantom power Shop No. 345-D, 3rd Floor Star City Shopping Mall, Opp,Bambino Cinema Abdullah HaroonRoad Saddar Karachi Pakistan

Behringer B-1 Condenser Microphone Designed for home-studio owners and musicians. The Behringer B-1 Large-Diaphragm Cardioid Condenser Mic employs a 1" capsule to capture sound with incredible realism and sensitivity. Its wide frequency response from 20Hz-20kHz is enhanced by a pronounced presence boost, making EQing unnecessary in many cases. The cardioid polar pattern, switchable high-pass filter, -10dB pad, 148dB SPL capability, and low self-noise make it perfect for close miking. Requires 48V phantom power. The Behringer B-1 Mic includes a carrying case, shock mount, and windscreen. Features 1" capsule 20Hz-20kHz frequency range enhanced by a pronounced presence boost Cardioid polar pattern Switchable high-pass filter (-6dB/octave at 75Hz) -10dB pad Low-cut filter -6dB/octave @ 75Hz (switchable) SPL of 148dB Low self-noise Perfect for close miking Requires 48V phantom power

Behranger B-1 Gold-Sputtered Large-Diaphragm Studio Condenser Microphone Designed for home-studio owners and musicians. The Behringer B-1 Large-Diaphragm Cardioid Condenser Mic employs a 1" capsule to capture sound with incredible realism and sensitivity. Its wide frequency response from 20Hz-20kHz is enhanced by a pronounced presence boost, making EQing unnecessary in many cases. The cardioid polar pattern, switchable high-pass filter, -10dB pad, 148dB SPL capability, and low self-noise make it perfect for close miking. Requires 48V phantom power. The Behringer B-1 Mic includes a carrying case, shock mount, and windscreen. Features 1" capsule 20Hz-20kHz frequency range enhanced by a pronounced presence boost Cardioid polar pattern Switchable high-pass filter (-6dB/octave at 75Hz) -10dB pad Low-cut filter -6dB/octave @ 75Hz (switchable) SPL of 148dB Low self-noise Perfect for close miking Requires 48V phantom power Views: 154

Multi-Pattern Condenser Microphone Package The MXL 770X multi-pattern condenser microphone package offers recording flexibility and increased performance in an all-in-one recording bundle. Building on the success and versatility of the popular MXL770, the 770X includes a larger upgraded gold-sputtered diaphragm for increased dynamic range and enhanced detail. The capsule offers 3 selectable polar patterns (Cardioid, Figure 8, and Omni-directional) optimizing the 770x for vocal, instrument, and even room recording situations. The 770X bundle includes the 770x mic, a heavy-duty shock mount with an integrated pop-filter, a 20" balanced XLR cable, and a microfiber cleaning cloth. This package is a perfect solution combining flexibility, quality, and value for the recording musician. MXL is one of the leading manufacturers of high performance audio products for professionals and recording enthusiasts around the world. MXL's award-winning solutions are used by today's top artists, engineers, professional producers, and businesses that require sonic quality on stage or in the studio. Premium condenser microphone with large 1.25" gold-sputtered diaphragm Stunning clarity and detail in the highs balanced with warmth on the low end Switchable cardioid, figure-of-eight, and omnidirectional polar patterns for versatility Package includes 770X microphone, shock mount with integrated pop-filter, balanced 20' XLR cable, and microfiber cleaning cloth SPECIFICATIONS Type: Pressure Gradient Multi-Pattern Condenser Mic Diaphragm: 6 Micron Gold-Sputtered Capsule Size: 32mm/1.26 in. Frequency Response: 20 Hz - 20 kHz Polar pattern: Cardioid/Figure-8/Omni Sensitivity: -35 dB re 1 V/Pa Output Impedance: 200 ohms Attenuation Switch: 0 dB, -10 dB High Pass Filter: 6 dB/Octave 135 Hz Equivalent noise: 16 dB (A-weighted IEC 651) High Pass Filter: 6 dB/Octave 135 Hz S/N Ratio: 78 dB (Ref. 1 Pa A-Weighted) Max SPL for.5% THD: 130 dB/140 dB (0 dB, -10 dB pad) Power Requirements: 48V phantom power (+/- 4V) Size: 60mm x 185mm/2.36 in. x 7.28 in. Weight: 1.1 lbs/500 g Metal Finish: Black with Black Grill

M-Audio Vocal Studio - M-Audio Vocal Studio Vocal Studio brings world-class audio to all your computer recording projects. Lay down vocals on your latest tune. Narrate your next podcast. Add a voice-over to your multimedia production. Vocal Studio does it all. The unique combination of high-performance hardware and easy-to-use software makes it possible. Simply plug the Producer USB microphone into your computer, fire up your favorite music software, and you’re ready to record. The microphone delivers exceptional clarity, and provides a convenient headphone jack for low-latency monitoring. Record professional-sounding vocals and more Created by the same engineers that design professional recording technology for studios around the world, the M-Audio® Producer USB microphone features a large diaphragm to capture the subtle nuances of male and female vocal performances. And, unlike many USB mics, the included software drivers allow you to listen to your performance in real time without the delays that otherwise plague computer-based recording. You can also use the microphone to capture instruments and other audio sources Features Producer USB microphone 16-bit recording at CD quality and beyond—44.1 or 48 kHz Large 16mm cardioid capsule protected by wire mesh Capsule sensitivity: -48 dB ref to 1V/Pa 1/8" stereo output for connecting headphones and low-latency monitoring Durable metal body USB connector LED power indicator Includes desktop mic stand Includes soft-sided carrying case Size: 9.5" x 2.8" by 7.75" Weight: 3 lbs. (approx.) Requirements Compatibility Hardware Compatibility ASIO 2 WDM Mac OS X Core Audio Note: Is is not possible to use more than 1 Producer USB on the same computer

Behringer B-1 Condenser Microphone Designed for home-studio owners and musicians. The Behringer B-1 Large-Diaphragm Cardioid Condenser Mic employs a 1" capsule to capture sound with incredible realism and sensitivity. Its wide frequency response from 20Hz-20kHz is enhanced by a pronounced presence boost, making EQing unnecessary in many cases. The cardioid polar pattern, switchable high-pass filter, -10dB pad, 148dB SPL capability, and low self-noise make it perfect for close miking. Requires 48V phantom power. The Behringer B-1 Mic includes a carrying case, shock mount, and windscreen. Features 1" capsule 20Hz-20kHz frequency range enhanced by a pronounced presence boost Cardioid polar pattern Switchable high-pass filter (-6dB/octave at 75Hz) -10dB pad Low-cut filter -6dB/octave 75Hz (switchable) SPL of 148dB Low self-noise Perfect for close miking Requires 48V phantom

Features Large 1" (25mm) capsule with gold-plated diaphragm Cardioid polar pattern Self noise of only 5dB (A) Ultra low noise, transformerless surface mount circuitry Wide dynamic range Gold-plated output contacts True condenser (externally biased) Internal capsule shock mounting Includes: Premium shock mount Pop filter Cable Microphone dust cover NT1-A Condenser Mic Bundle Specifications: Power: P48 (48V), P24 (24V) phantom supply Acoustic principle: Pressure gradient Directional pattern: Cardioid Frequency range: 20Hz - 20kHz Output impedance: 100Ohms Signal noise ratio: >88dB SPL (A - weighted per IEC651) Equivalent noise: 5dB SPL (A - weighted per IEC651) Maximum SPL: 137dB SPL (@1kHz, 1% THD into 1KOhms load) Maximum output voltage: +13.7dBu (@1kHz, 1% THD into 1KOhms load) Sensitivity: -32dB re 1 Volt/Pascal (25mV @ 94dB SPL) +/- 2 dB @1kHz Weight: 11.5 oz. - 326g Dimensions (WxHxD): 190mm x 50mm x 50mm Views: 1

Type Studio Microphone Product Description The sE X1 is one of our most popular microphones and whether you’re recording vocals, percussion, guitar or any other instrument, the sE X1 is the perfect choice. It features a hand built capsule with a 10dB pad and low cut bass filter and is finished in noise damping black paint. The sE X1 is ideal for both male and female vocals. The sE X1 Vocal Pack consists of everything you need to start recording straight away in your project and home studio. The unique shockmount mounting system makes for quick and easy setup. The sE X1 Vocal Pack includes the recording essentials; sE X1 condenser microphone, a shock mount, sE Metal Pop Filter and a 3m high-quality microphone cable. The sE Metal Pop Filter is crucial for recording vocals and has been created with the metal screen louvered at a slight angle. This redirects any ultra-low frequency blasts leaving the vocal performance unaffected and without any low frequency ‘pop’s. Being made of metal as opposed to the traditional fabric shield makes the sE Pop Filter much more durable. What the professionals say: we chose the sE X1 over the NT1a for the vast majority of the recordings, because the recordings sounded 'righter' when put into the middle of tracks - we could do more with them in mixing and the end result was better Technical Specs for the sE X1 Condenser microphone: Frequency Response: 20Hz-20KHz Sensitivity: -32 dBV/Pa (25.1mV/Pa) Polar Pattern: Cardioid Impedance: ≤ 200 Ohms Equivalent Noise Level: 16dB(A weighted) Max SPL for 0.5% THD@Hz: 125dB Power Requirement: Phantom power 48V±4V Connector: 3-pin The sE X1 Vocal Pack includes: sE X1 Condenser microphone sE Metal Pop Filter sE Shock Mount sE XLR-XLR 3m Microphone Cable

The sE X1 is one of our most popular microphones and whether you’re recording vocals, percussion, guitar or any other instrument, the sE X1 is the perfect choice. It features a hand built capsule with a 10dB pad and low cut bass filter and is finished in noise damping black paint. The sE X1 is ideal for both male and female vocals. The sE X1 Vocal Pack consists of everything you need to start recording straight away in your project and home studio. The unique shockmount mounting system makes for quick and easy setup. The sE X1 Vocal Pack includes the recording essentials; sE X1 condenser microphone, a shock mount, sE Metal Pop Filter and a 3m high-quality microphone cable. The sE Metal Pop Filter is crucial for recording vocals and has been created with the metal screen louvered at a slight angle. This redirects any ultra-low frequency blasts leaving the vocal performance unaffected and without any low frequency ‘pop’s. Being made of metal as opposed to the traditional fabric shield makes the sE Pop Filter much more durable. What the professionals say: we chose the sE X1 over the NT1a for the vast majority of the recordings, because the recordings sounded 'righter' when put into the middle of tracks - we could do more with them in mixing and the end result was better. - Producer Simon Franglen (Avatar, Madonna, Titanic) Technical Specs for the sE X1 Condenser microphone: Frequency Response: 20Hz-20KHz Sensitivity: -32 dBV/Pa (25.1mV/Pa) Polar Pattern: Cardioid Impedance: ≤ 200 Ohms Equivalent Noise Level: 16dB(A weighted) Max SPL for 0.5% THD Hz: 125dB Power Requirement: Phantom power 48V±4V Connector: 3-pin The sE X1 Vocal Pack includes: sE X1 Condenser microphone sE Metal Pop Filter sE Shock Mount sE XLR-XLR 3m Microphone Cable

High Quality Professional Boundary Mic for Ten to Fifteen People with Only one Hi Frequency Mic for Skype Communication Call. Detail Description: Capsule Type: Condenser Frequency Response: 20Hz-20kHz Output Impedance(Ohm): 75 Sensitivity (±2dB): -36dB Power Supply: Phantom Power 48V Dimension (WxDxH)mm: 75x102x28 N.W.: 115g Polar Pattern: Super Cardioid

High Quality Professional Boundary Mic for Ten to Fifteen People with Only one Hi Frequency Mic for Skype Communication Call. Detail Description: Capsule Type: Condenser Frequency Response: 20Hz-20kHz Output Impedance(Ohm): 75 Sensitivity (±2dB): -36dB Power Supply: Phantom Power 48V Dimension (WxDxH)mm: 75x102x28 N.W.: 115g Polar Pattern: Super Cardioid

The sE X1 is one of our most popular microphones and whether you’re recording vocals, percussion, guitar or any other instrument, the sE X1 is the perfect choice. It features a hand built capsule with a 10dB pad and low cut bass filter and is finished in noise damping black paint. The sE X1 is ideal for both male and female vocals. The sE X1 Vocal Pack consists of everything you need to start recording straight away in your project and home studio. The unique shockmount mounting system makes for quick and easy setup. The sE X1 Vocal Pack includes the recording essentials; sE X1 condenser microphone, a shock mount, sE Metal Pop Filter and a 3m high-quality microphone cable. The sE Metal Pop Filter is crucial for recording vocals and has been created with the metal screen louvered at a slight angle. This redirects any ultra-low frequency blasts leaving the vocal performance unaffected and without any low frequency ‘pop’s. Being made of metal as opposed to the traditional fabric shield makes the sE Pop Filter much more durable. What the professionals say: we chose the sE X1 over the NT1a for the vast majority of the recordings, because the recordings sounded 'righter' when put into the middle of tracks - we could do more with them in mixing and the end result was better. - Producer Simon Franglen (Avatar, Madonna, Titanic) Technical Specs for the sE X1 Condenser microphone: Frequency Response: 20Hz-20KHz Sensitivity: -32 dBV/Pa (25.1mV/Pa) Polar Pattern: Cardioid Impedance: ? 200 Ohms Equivalent Noise Level: 16dB(A weighted) Max SPL for 0.5% THD 1000Hz: 125dB Power Requirement: Phantom power 48V±4V Connector: 3-pin The sE X1 Vocal Pack includes: sE X1 Condenser microphone sE Metal Pop Filter sE Shock Mount sE XLR-XLR 3m Microphone Cable

M1 Professional Large-diaphragm condenser microphone for unsurpassed audio quality Ideal as main and support microphone for most differing recording situations Cardioid pickup pattern for outstanding sound source separation and feedback rejection Pressure-gradient transducer with shock-mounted capsule Prefect vocals and acoustic instruments External 36-52 Volt phantom power operation Heavy-duty suspension mount and aluminum transport case included Ultra-rugged construction with metal die-cast body High-quality components and exceptionally rugged construction ensure long lift. Acoustical operating principle: Pressure gradient transducer Directional pattern: Cardioid Frequency range: 20Hz – 20KHz Sensitivity: -37dBV/Pa Rated Impedance: 200 Ohms Min. load impedance: 1000 Ohms SPL: 144dB S/N ratio: 78dB Dynamic range: 128dB Power supply voltage: 48V +/-3V Current consumption: 4mA Weight (Microphone only): 0.25Kg (0.55lb) (with suspension mount): 0.43Kg (0.95lb) Dimensions: 46mm (dia.) x 157mm (L) Dimensions: 1.8” (dia.) x 6.2” (L)

Type Studio Microphone Product Description High-performance, dual-diaphragm design for versatility. The Behringer B-2 Pro Condenser Microphone provides transparency usually found on high-end large-diaphragm condenser mics. Features selectable patterns, low-cut filter, and built-in shielding. A 10dB attenuator can be used with high-volume signal sources. Rugged hard case, suspension mount, and windscreen included. Requires phantom power. Features 1" dual-diaphragm condenser microphone Pressure-gradient transducer with shockmounted, gold-sputtered, dual-diaphragm capsule Exceptionally flat frequency response (20Hz-20kHz) Selectable cardioid, omnidirectional, or figure-8 pickup pattern Signal-to-noise ratio: up to 77dB (cardioid), 76dB (omnidirectional), and 78dB (figure-8) Low-frequency roll-off switch Input attenuation of -10dB Ultralow-noise transformerless FET input circuitry Impedance: nominal - 1 kohm Gold-plated 3-pin XLR output connector Rugged construction with satin nickel-plated brass body