Automatic mains

Automatic mains failure, Engine control, Gas engine support, Generator protection, Built in alarms and warnings, 3 phase mains voltage inputs 1 phase genset voltage input 1 phase genset CT input Engine oil pressure measurement Engine coolant temperature measurement Genset active power measurement Genset power factor measurement Periodic maintenance request indicator Engine hours counter Statistical counters Field adjustable parameters Logic level serial port Optional RS-232 adapter Free MS-Windows Remote monitoring SW: -local, LAN, IP and modem connection -monitoring, download of parameters LED displays Configurable analogue inputs: 2 Configurable digital inputs: 5 Configurable relay outputs: 2 Total relay outputs: 6 Remote Start operation available Survives cranking dropouts Sealed front panel Plug-in connection system for easy replacement Small dimensions (130x100x39mm) Low cost

The DKG-309 is a comprehensive AMF unit for a single genset standby or dual genset mutual standby operations. In AUTOMATIC position, DKG-309 monitors mains phase voltages and controls the automatic starting, stopping and load transfer of the generating set in case of a mains failure and once the generator is running, it monitors internal protections and external fault inputs. If a fault condition occurs, the unit shuts down the engine automatically and indicates the failure source with the corresponding red led lamp and text. The operation of the unit is controlled with front panel pushbuttons. The LOAD TEST, TEST, AUTO and OFF pushbuttons select the operating mode. Other buttons select the display parameter scroll, alarm mute and lamp test functions. The DKG-309 provides a comprehensive set of digitally adjustable timers, threshold levels, input and output configurations and operating sequences. The unauthorized access to program parameters is prevented by the program lock input. All programs may be modified via front panel pushbuttons, and do not require an external unit. The fault conditions are considered in 3 categories as Warnings, Loaddumps and Shutdown Alarms. Measured values have separate programmable limits for warning and shutdown conditions. The unit is able to initiate modem calls and sending SMS messages in fault conditions. Last 100 faults are stored in the event log file. The event log includes not only the date-time information, but also a comprehensive list of measured genset parameters at the time that the fault has occurred. The service request indicator lamp turns on at the expiration of either engine hours or time limits. It is possible to monitor and control the operation of the system locally or remotely with the WINDOWS based RAINBOW program. The unit supports MODBUS protocol enabling communication with PLCs and building management systems. The MODBUS protocol is also supported through GSM and PSTN modems. The unit is designed for front panel mounting. Connections are made with 2 part plug and socket connectors. The unit offers triple language support. Default languages are English-Turkish and Chinese. MEASUREMENTS Generator Volts: L1-N, L2-N, L3-N Generator Volts: L1-L2, L2-L3, L3-L1 Generator Amps: L1, L2, L3 Generator KW: L1, L2, L3, total Generator pf: L1, L2, L3, total Generator Frequency Engine rpm (optional) Mains Volts: L1-N, L2-N, L3-N Mains Volts: L1-L2, L2-L3, L3-L1 Mains Frequency Battery Voltage Engine Coolant Temperature Engine Oil Pressure Fuel Level FEATURES Automatic mains failure Engine control Gas engine support Engine idle speed control Generator protection Built in alarms and warnings Remote Start operation available Dual genset mutual standby operation Load shedding, dummy load Periodic maintenance request indicator Built in daily / weekly / monthly exerciser Event logging with time stamp and measurements Statistical counters Battery backed-up real time clock Weekly operation schedule programs 3 level password support Field adjustable parameters RS-232 serial port Firmware downloadable from serial port Free MS-Windows Remote monitoring SW: -local, and modem connection -monitoring, download of parameters -modem networking GSM and PSTN modem support GSM SMS message sending on fault MODBUS communications Graphic LCD display (128x64 pixels) We are: Authorized Distributor of Datakom in Pakistan Authorized Distributor of Datakom in Lahore Sole Distributor of Datakom

The controller is a comprehensive AMF unit for single genset standby or dual genset mutual standby operations. The unit is available with MPU or CANBUS versions. The CANBUS version connects to ECU controlled electronic engines providing engine control, protection and instrumentation without extra senders. The ECU alarms are displayed in text. The unit has an optional internal GSM modem module and is able to initiate modem calls and send SMS messages in fault conditions through either internal or external modems. The unit provides a comprehensive set of digitally adjustable timers, threshold levels, input and output configurations, operating sequences and engine types. All programs may be modified via front panel pushbuttons, and do not require an external unit. Last 100 faults are stored in the event log file. The event log includes not only the date-time information, but also a comprehensive list of measured genset parameters at the time that the fault has occurred. The WINDOWS based RAINBOW program allows remote monitoring and control. The unit supports MODBUS protocol enabling communication with PLCs and building management systems. The MODBUS protocol is also supported through GSM and PSTN modems. The unit offers multiple language support. True RMS measurements ECU connection through J1939 CAN option J1939 ECU warnings displayed as text MPU input option Internal GSM modem option Dual genset mutual standby operation Event logging with time stamp and measurements Battery backed-up real time clock Built in daily / weekly / monthly exerciser Weekly operation schedule programs Field adjustable parameters RS-232 serial port Optional RS-485 serial port Free MS-Windows Remote monitoring SW GSM and PSTN modem support GSM SMS message sending on fault MODBUS communications Multiple language support Customer logo display capability 10ADC relay outputs Configurable analogue inputs: 4 Configurable digital inputs: 7 Configurable relay outputs: 2 Total relay outputs: 6 I/O expansion capability Plug-in connection system

The DKG-329 is designed to monitor 3-phase mains voltages, send remote start command to generating sets and control the changeover of both generator and mains contactors. The unit offers an internal synchroscope for uninterrupted transfer in both directions. The number of gensets to run before transfer is selectable, allowing multiple genset support. If a fault condition occurs, the unit disables the remote starting automatically and indicates the failure with the corresponding led lamp and text. The unit provides a comprehensive set of digitally adjustable program parameters. The unauthorized access to program parameters is prevented by a 3 level password system. All programs may be modified via front panel pushbuttons and do not require any external unit. Last 100 faults are stored in the event log file. The event log includes not only the date-time information, but also a comprehensive list of measured parameters at the time that the fault has occurred. The WINDOWS based RAINBOW program allows remote monitoring and control. The unit supports MODBUS protocol enabling communication with PLCs and building management systems. The MODBUS protocol is also supported through GSM and PSTN modems. True RMS measurements Synchroscope & check synch No break transfer& no break load test Automatic contactor control Multiple genset system support Load shedding, dummy load Event logging with time stamp and measurements Battery backed-up real time clock Built in daily / weekly / monthly exerciser Weekly operation schedule programs Field adjustable parameters RS-232 serial port Free MS-Windows Remote monitoring SW GSM and PSTN modem support GSM SMS message sending on fault MODBUS communications Multiple language support Customer logo display capability 16 Amp contactor outputs 1 Amp DC semiconductor control outputs Configurable digital inputs: 7 Configurable digital outputs: 3 Total digital outputs: 6 I/O expansion capability Plug-in connection system Authorized Distributor of Datakom in Pakistan Authorized Disttibutor of Datakom in Lahore Sole Distributor of Datakom

DESCRIPTION Output Max Configurable Power (Watts) 3.5kWatts / 5.0kVA Output Voltage Note Configurable for 208 or 240 nominal output voltage Output Voltage Distortion Less than 3 % Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz user adjustable +/- 0.1 Hz Sync to mains Other Output Voltages 240 V Load Crest Factor 3: 1 Topology Double conversion online Waveform type Sine wave Bypass Internal bypass (automatic and manual) Input Input frequency 50/60 Hz +/- 5 Hz Auto-sensing Input voltage range for main operations 160 - 280, Adjustable (half load)V Number of Power Cords 1 Other Input Voltages 240 V Batteries & Runtime Battery type Lead-acid battery Included Battery Modules 2 Typical recharge time 2.5hour(s) Replacement Battery APCRBC140 Expected Battery Life (years) 3 - 5 RBC Quantity 1 Battery Charge Power (Watts) 382 Watts Extendable Run Time 1 Runtime View Runtime Graph Efficiency View Efficiency Graph Communications & Management Interface Port(s) RJ-45 10/100 Base-T, RJ-45 Serial, SmartSlot Pre-Installed SmartSlot™ Cards AP9631 Control panel LED status display with load and battery bar-graphs and on line: on battery: replace battery: overload and bypass indicators Audible Alarm Alarm when on battery: distinctive low battery alarm: overload continuous tone alarm Emergency Power Off (EPO) Yes Surge Protection and Filtering Surge energy rating 555Joules 2 year warranty repair or replace Mention that you found this ad on DealMarkaz.pk when you call.

DESCRIPTION APC UPS 3KVA ONLINE FOR MEDICAL MACHINERY IT HOME DATA CENTER Output Max Configurable Power (Watts) 2.1kWatts / 3.0kVA Output Voltage Note Configurable for 220: 230 or 240 nominal output voltage Efficiency at Full Load 91.0 % Output Voltage Distortion Less than 3 % Output Frequency (sync to mains) 50/60 Hz +/- 3 Hz user adjustable +/- 0.1 Hz Sync to mains Other Output Voltages 220 V, 240 V Load Crest Factor 3: 1 Topology Double conversion online Waveform type Sine wave Bypass Internal bypass (automatic and manual) Input Input frequency 50/60 Hz +/- 5 Hz Auto-sensing Input voltage range for main operations 100 - 280 Adjustable, 160 - 280V Number of Power Cords 1 Efficiency at Full Load 91.0 % Other Input Voltages 220 V, 240 V Batteries & Runtime Battery type Lead-acid battery Included Battery Modules 2 Typical recharge time 2.5hour(s) Expected Battery Life (years) 3 - 5 RBC Quantity 1 Battery Charge Power (Watts) 382 Watts Extendable Run Time 1 Runtime View Runtime Graph Communications & Management Interface Port(s) DB-25 RS-232, Smart-Slot Control panel LED status display with load and battery bar-graphs and on line: on battery: replace battery: overload and bypass indicators Audible Alarm Alarm when on battery: distinctive low battery alarm: overload continuous tone alarm Emergency Power Off (EPO) Yes Available SmartSlot™ Interface Quantity 1 Surge Protection and Filtering Surge energy rating 480Joules Filtering Full time multi-pole noise filtering: 0.3% IEEE surge let-through: zero clamping response time: meets UL 1449 Physical Maximum Height 432MM, 43.2CM Maximum Width 130MM, 13.0CM Maximum Depth 660MM, 66.0CM Net Weight 54.56KG Shipping weight 63.64KG Shipping Height 347MM, 34.7CM Shipping Width 603MM, 60.3CM Shipping Depth 980MM, 98.0CM Color Black Units per Pallet 6.0 Environmental Operating Temperature 0 - 40 °C Operating Relative Humidity 0 - 95 % Operating Elevation 0 - 3048meters Storage Temperature -15 - 45 °C Storage Relative Humidity 0 - 95 % Storage Elevation 0 - 15240meters Audible noise at 1 meter from surface of unit 55.0dBA Online thermal dissipation 655.0BTU/hr Conformance Approvals BSMI, C-Tick, CE, CSA, EN 50091-1, EN 50091-2, EN 55022 class A, EN 60950, EN 61000-3-2, GOST, JEON, UL 1778, VCCI, VDE Standard warranty 2 years repair or replace Mention that you found this ad on DealMarkaz.pk when you call.

DKG-325, is a ready-to-use control and transfer panel for gasoline and diesel gensets rated up to 15kVA. It supports both 1 and 3 phase gensets. The unit incorporates all necessary components for battery charging, genset control and load transfer. It features 2 contactors, battery charging rectifier and the automatic control circuitry in one enclosure. Internal contactors are rated for 40Amp switching and are capable of carrying 25Amp continuously. Fuel and crank outputs are provided through 40Amp rated relays. The internal battery charging rectifier is rated 1Amp 12V-DC. The unit features 3 internal current transformers. It measures currents and power from both genset and mains

Product Description 5 kW Beautiful Touch Screen Display 2 outputs for Automatic load management along with the online monitoring device Battery in-dependency (can work without battery) Compatible with K-Electric mains Parallel Operation up to 9 Units We are Authorize Distributor of Tesla Solar, Inverex, Maxpower Off Grid and Hybrid Solar Inverters We also deal in Axpert Voltronics MKS, VMII, VMIII, Infini V, INFINITY HLE, Aerox Series and Nitrox. For More Information Contact Now Special Discount for wholesalers *Stock Availble*

Output Output Power Capacity 12.8 kW / 16 kVA Max Configurable Power 12.8 kW / 16 kVA Nominal Output Voltage 120V,208V Output Voltage Note Configurable for 120/208 or 120/240 output voltage Output Voltage Distortion Less than 5% at full load Output Frequency (sync to mains) 47 - 63 Hz Crest Factor up to 5: 1 Waveform Type Sine wave Output Connections (1) Hard Wire 4-wire (2PH + N +G) Bypass Internal Bypass (Automatic and Manual) Input Nominal Input Voltage 208V Input Frequency 45 - 65 Hz (auto sensing) Input Connections Hard Wire 4-wire (2PH+N+G) Input voltage range for main operations 96 - 138 (Line to Neutral)V Other Input Voltages 240V Batteries & Runtime Battery Type Maintenance-free sealed Lead-Acid battery with suspended electrolyte: leakproof Included Battery Modules 4 Typical recharge time 3 hour(s) Replacement Battery SYBT5 Typical Backup Time at Half Load 17.1 minutes (6400 Watts) Typical Backup Time at Full Load 6.0 minutes (12800 Watts) Runtime Chart Symmetra LX

DESCRIPTION Physical number of rack unit 6U colour Black depth 73.6 cm height 43.2 cm mounting location Front mounting preference Lower product weight 110.91 kg mounting mode Not rack-mountable two post mountable 0 USB compatible No width 26.3 cm INPUT network frequency 50/60 Hz +/- 5 Hz auto-sensing number of input connectors 1 hard wire 3-wire (1P + N + E) 1 hard wire 5-wire (3P + N + Einput voltage limits 160...280 V inputvolt_other 220 V 240 V input harmonic distortion Less than 7 % for full load input voltage 230 V 400 V 3 phases OutputOutput rated power in W 8000 W Maximum configurable power in W 8000 W harmonic distortion Less than 3 % output frequency 50/60 Hz +/- 3 Hz user adjustable +/- 0.1 Hz sync to mains Output voltage 220 V 240 V crest factor 3: 1 UPS type Double conversion online Wave type Sine wave output connector type Hard wire 3-wire (H N + E) 1 nb of power socket outlets 4 IEC 60320 C13 6 IEC Jumpers 4 IEC 60320 C19 bypass type Internal bypass (automatic and manual)curve load maximum 100 % curve load minimum 3 % curve proportional loss 0.0304 curve square loss 0.038 curve X-axis maximum 100 % curve test cond ID Curve fit to measured efficiency data. All measurements taken in normal operating mode, at typical environmental conditions, with nominal electrical input and balanced resistive load (PF = 1.0) output. curve X-axis minimum 0 % curve X-axis title Load curve X-axis units Percentage curve Y-axis maximum 100 % curve Y-axis minimum 50 % curve Y-axis title Efficiency curve Y-axis units Percentage graph display 1 output voltage 230 V Maximum configurable power in VA 10000 VA rated power in VA 10000 VA Conformance product certifications C-Tick CE GOST VDE 1 year replace or repair warranty Mention that you found this ad on DealMarkaz.pk when you call.

DESCRIPTION Product Description 5 kW Beautiful Touch Screen Display 2 outputs for Automatic load management along with the online monitoring device Battery in-dependency (can work without battery) Compatible with K-Electric mains Parallel Operation up to 9 Units We are Authorize Distributor of Tesla Solar, Inverex, Maxpower Off Grid and Hybrid Solar Inverters We also deal in Axpert Voltronics MKS, VMII, VMIII, Infini V, INFINITY HLE, Aerox Series and Nitrox. For More Information Contact Now Special Discount for wholesalers *Stock Availble* Mention that you found this ad on DealMarkaz.pk when you call.