48v condenser microphone

This is a USB Condenser Microphone suitable for Vocals, Guitars and Other Instruments. No Driver is required for this microphone. PLUG AND PLAY System. Specification: Headphone Plugin Jack Supported Operating systems are Windows,Mac etc. Pickup Pattern: Polar Pickup Patten Frquency Response: 8kHz - 17kHz Ultra Low latency You can plug your headphones into this microphone and listen through this. This microphone has a built in 7.1 Channels USB Audio Interface and it support HID based on PCM IC SMD Technology. Original Pictures are attached of this Microphone and Its Working on a multi trck studio software. SERIOUS BUYERS CAN CONTACT ME ONLY..!! Project of: Sam Technology Professionals Project code: STP-CM99-AP2 Warranty: N/A

Condenser microphone suitable for vocals, guitar and broadcasts etc. Connect with your pc or laptop. No external soundcard or hardware is required. Plug and play system. It has a built in low noise balanced preamp and capsule TSB160A high quality condenser mic element. Best for recording covers and songs. Specifications: Impedance: 3.3k ohm Jfet powered: MPF102 Operating voltage: USB source 5v Output: Stereo 3.5mm jack Frequency response: Hz to Hz Project of: Sam Technology Professionals Project code: STP-CM Warranty: N/A Serious buyers can contact me.

New Box Pack Package included: 1 x 48V Phantom Power 1 x Adapter Views: 1

Price: Seller Type: An Individual Condition: New This is a USB Condenser Microphone suitable for Vocals, Guitars and Other Instruments. No Driver is required for this microphone. PLUG AND PLAY System. Specification: Headphone Plugin Jack Supported Operating systems are Windows,Mac etc. Pickup Pattern: Polar Pickup Patten Frquency Response: 8kHz - 17kHz Ultra Low latency You can plug your headphones into this microphone and listen through this. This microphone has a built in 7.1 Channels USB Audio Interface and it support HID based on PCM IC SMD Technology. Original Pictures are attached of this Microphone and Its Working on a multi track studio software. Such as Audacity, Mixcraft, Fruity Loops etc. SERIOUS BUYERS CAN CONTACT ME ONLY..!! Project of: Sam Technology Professionals Project code: STP-CM99-AP2 DELIVER ALL OVER PAKISTAN Call me at: .

Type Instrument Accessories Type Vocal Its a best choice for vocals. It is a condenser microphone suitable for vocals and guitars recordings. It is a large diaphragm with built in FET. You can plug it to computer directly. Or you can connect it to any type of audio interface. Fantastic Frequency Response. ___________________ Project of "Sam Technology Professionals" Project Code: STP-CM Search its project name on Google for more information about it.

Multi-Pattern Condenser Microphone Package The MXL 770X multi-pattern condenser microphone package offers recording flexibility and increased performance in an all-in-one recording bundle. Building on the success and versatility of the popular MXL770, the 770X includes a larger upgraded gold-sputtered diaphragm for increased dynamic range and enhanced detail. The capsule offers 3 selectable polar patterns (Cardioid, Figure 8, and Omni-directional) optimizing the 770x for vocal, instrument, and even room recording situations. The 770X bundle includes the 770x mic, a heavy-duty shock mount with an integrated pop-filter, a 20" balanced XLR cable, and a microfiber cleaning cloth. This package is a perfect solution combining flexibility, quality, and value for the recording musician. MXL is one of the leading manufacturers of high performance audio products for professionals and recording enthusiasts around the world. MXL's award-winning solutions are used by today's top artists, engineers, professional producers, and businesses that require sonic quality on stage or in the studio. Premium condenser microphone with large 1.25" gold-sputtered diaphragm Stunning clarity and detail in the highs balanced with warmth on the low end Switchable cardioid, figure-of-eight, and omnidirectional polar patterns for versatility Package includes 770X microphone, shock mount with integrated pop-filter, balanced 20' XLR cable, and microfiber cleaning cloth SPECIFICATIONS Type: Pressure Gradient Multi-Pattern Condenser Mic Diaphragm: 6 Micron Gold-Sputtered Capsule Size: 32mm/1.26 in. Frequency Response: 20 Hz - 20 kHz Polar pattern: Cardioid/Figure-8/Omni Sensitivity: -35 dB re 1 V/Pa Output Impedance: 200 ohms Attenuation Switch: 0 dB, -10 dB High Pass Filter: 6 dB/Octave 135 Hz Equivalent noise: 16 dB (A-weighted IEC 651) High Pass Filter: 6 dB/Octave 135 Hz S/N Ratio: 78 dB (Ref. 1 Pa A-Weighted) Max SPL for.5% THD: 130 dB/140 dB (0 dB, -10 dB pad) Power Requirements: 48V phantom power (+/- 4V) Size: 60mm x 185mm/2.36 in. x 7.28 in. Weight: 1.1 lbs/500 g Metal Finish: Black with Black Grill

Behringer B-1 Condenser Microphone Designed for home-studio owners and musicians. The Behringer B-1 Large-Diaphragm Cardioid Condenser Mic employs a 1" capsule to capture sound with incredible realism and sensitivity. Its wide frequency response from 20Hz-20kHz is enhanced by a pronounced presence boost, making EQing unnecessary in many cases. The cardioid polar pattern, switchable high-pass filter, -10dB pad, 148dB SPL capability, and low self-noise make it perfect for close miking. Requires 48V phantom power. The Behringer B-1 Mic includes a carrying case, shock mount, and windscreen. Features 1" capsule 20Hz-20kHz frequency range enhanced by a pronounced presence boost Cardioid polar pattern Switchable high-pass filter (-6dB/octave at 75Hz) -10dB pad Low-cut filter -6dB/octave @ 75Hz (switchable) SPL of 148dB Low self-noise Perfect for close miking Requires 48V phantom power

Behranger B-1 Gold-Sputtered Large-Diaphragm Studio Condenser Microphone Designed for home-studio owners and musicians. The Behringer B-1 Large-Diaphragm Cardioid Condenser Mic employs a 1" capsule to capture sound with incredible realism and sensitivity. Its wide frequency response from 20Hz-20kHz is enhanced by a pronounced presence boost, making EQing unnecessary in many cases. The cardioid polar pattern, switchable high-pass filter, -10dB pad, 148dB SPL capability, and low self-noise make it perfect for close miking. Requires 48V phantom power. The Behringer B-1 Mic includes a carrying case, shock mount, and windscreen. Features 1" capsule 20Hz-20kHz frequency range enhanced by a pronounced presence boost Cardioid polar pattern Switchable high-pass filter (-6dB/octave at 75Hz) -10dB pad Low-cut filter -6dB/octave @ 75Hz (switchable) SPL of 148dB Low self-noise Perfect for close miking Requires 48V phantom power Views: 154

Behringer B-1 Condenser Microphone Designed for home-studio owners and musicians. The Behringer B-1 Large-Diaphragm Cardioid Condenser Mic employs a 1" capsule to capture sound with incredible realism and sensitivity. Its wide frequency response from 20Hz-20kHz is enhanced by a pronounced presence boost, making EQing unnecessary in many cases. The cardioid polar pattern, switchable high-pass filter, -10dB pad, 148dB SPL capability, and low self-noise make it perfect for close miking. Requires 48V phantom power. The Behringer B-1 Mic includes a carrying case, shock mount, and windscreen. Features 1" capsule 20Hz-20kHz frequency range enhanced by a pronounced presence boost Cardioid polar pattern Switchable high-pass filter (-6dB/octave at 75Hz) -10dB pad Low-cut filter -6dB/octave 75Hz (switchable) SPL of 148dB Low self-noise Perfect for close miking Requires 48V phantom

Large diaphragm, little price. The MXL 990 Condenser Microphone with shock mount has a silky, sweet high end while retaining tight, solid low and midrange reproduction. The 3/4" gold-sputtered diaphragm creates a professional sound suited for digital and analog recording. Attractive vintage body style with champagne finish. The 30Hz-20kHz frequency response is ideal for lead and background vocal, male or female. Includes custom shock mount, mic stand adapter, and case. Remember folks, this mic requires phantom power, so make sure your console or interface delivers it before ordering. There are a bazillion studio vocal mics on the market that break the magical $100 barrier, a traditionally unheard of price point for a studio vocal mic. Once that price floor was demolished, however, the market became flooded with offerings in the $ price range. MXL has emerged as a true leader in this market, and the MXL990 is MXL's flagship product in that category. If a well-built, good-sounding, versatile studio microphone for less than $100 sounds like a good fit for your current needs, you can't go wrong with the MXL990. FEATURES 3/4" gold-sputtered diaphragm Attractive vintage body style with champagne finish 30Hz-20kHz frequency response 130dB maximum SPL Sensitivity: 15MV/pa Equivalent noise: 20dB (A-weighted) SPECIFICATIONS 990 Condenser Microphone with Shockmount Type: Condenser pressure gradient condenser Diaphragm: 6 micron gold-sputterred Frequency response: 30Hz — 20kHz Polar Pattern: Cardioid Sensitivity: 15mV/Pa Impedance: 200 Ohms S/N Ratio: 80dB (Ref. 1Pa A-weighted) Equivalent Noise Level: 20dB(A weighted IEC ) Max SPL for 0.5% THD: 130Db Max SPL with -10dB cut: 130dB Power Requirements: 48V Phantom Power (+- 4V) Current Consumption:

Plug and play, plug directly into your devices with USB port, no needed drivers.With the USB terminal to supply power, the condenser microphone needs no 48V phantom power, battery, or other assistive devices.Cardioid pick-up pattern minimizes background noise and isolates the main sound source.2m long leather cord extends your music space freely and meets your need of all aspects of enjoyment.Wide frequency response (30Hz-20kHz) makes vocal performances sound clear, natural and vibrant. How to setting it?Plug the USB cable to your computer at the same time. Ready for use.If the microphone cannot be used to your device, please check if your device has set itself correctly with the microphone. If not, please follow the step to setting it. Step 1: Open your control panel, and click on /"sound/", a window pops up.Step 2: Select the recording, you will see the microphone is set up or on default.Step 3: Double click the microphone if it is already connected., and then setting yourmicrophone properties. 1.Unplug the USB cable to check whether the pins at the bottom of the mic are loosened.2.Restart computer and re-plug the mic to other USB port.3.If the /"USB PnP Audio Device/" appears in the sound settings of computer(below are the methods how to get to sound settings), the mic is able to work.(Windows: Right click speaker icon on right corner of computer→/"Recording Device/"Mac: Click /"System Preferences/"→/"Sound/"→/"Input/") If the mic disconnects itself without warning, what can I do?Answer: There are two reasons for this situation. One is that the poor connection. The other is that the USB cable is broken. If you have tried to replug the USB cable into the mic, and plug the mic to other USB port, then it will be the problem of the cable. If the mic has hissing what can I do? 1.Re-plug the USB cable into the microphone. If the cable gets loose, noiseis easily generated or transmission of signal may run into problem. 2.Reset computer and re-plug microphone into other USB port. 3.Place it not too close to any power source or computer host. Check whether there's smart-phone near by the USB cable. 4.Set the on-body control of mic and input/output level of computer at 50%-75%. Volume is the culprit for noise. (Windows: Right click speaker icon on right corner of computer→/"Recording Device/"//"Playback Device/"→right click /"USB PnP Device/"/default speaker→/"Properties/"→/"Levels/". If there's /"/"Microphone Boost/"/", turn it to 0-10dB. Mac: /"System Preferences/"→/"Sound/"→/"Input/"//"Output/"→/"Input Volume/"//"Output Volume/") 5.(If using Windows computer,) disable all sound effects. (Right click speaker icon on right corner of computer→/"Playback Device/"→right click the default loudspeaker→/"Enhancements/"→click /"Disable all sound effects/".) Hope these methods could help eliminate noise and make the mic sound better. Colour:black Material:Zinc alloy + plastic Size:14.5*4.8cm Package Contents: 1* microphone 1* USB cable 1* foam cover 1* manual Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.

M1 Professional Large-diaphragm condenser microphone for unsurpassed audio quality Ideal as main and support microphone for most differing recording situations Cardioid pickup pattern for outstanding sound source separation and feedback rejection Pressure-gradient transducer with shock-mounted capsule Prefect vocals and acoustic instruments External 36-52 Volt phantom power operation Heavy-duty suspension mount and aluminum transport case included Ultra-rugged construction with metal die-cast body High-quality components and exceptionally rugged construction ensure long lift. Acoustical operating principle: Pressure gradient transducer Directional pattern: Cardioid Frequency range: 20Hz – 20KHz Sensitivity: -37dBV/Pa Rated Impedance: 200 Ohms Min. load impedance: 1000 Ohms SPL: 144dB S/N ratio: 78dB Dynamic range: 128dB Power supply voltage: 48V +/-3V Current consumption: 4mA Weight (Microphone only): 0.25Kg (0.55lb) (with suspension mount): 0.43Kg (0.95lb) Dimensions: 46mm (dia.) x 157mm (L) Dimensions: 1.8” (dia.) x 6.2” (L)

ENRG Uni-directional Condenser Microphone with Alloy-Arm Mic holder and filter Frequency response: 20Hz-20khz Sensitivity: -34dB+2dB (0dB=1V/Pa at 1kHz) Output impedance: 1509+30% (at 1kHz) Load impedance: ≥10000 Equivalent noise level: 16dB A Maximum sound pressure level: 132dB (at 1kHz≤1% T.H.D) Signal to noise ratio: 78dB Operating voltage: 48V phantom power Current consumption: 3mA Monomer weight: about 400g

A Versatile, Studio-quality USB Microphone Boasting studio-quality sound in an all-in-one package, the Rode NT-USB USB condenser microphone lets you start recording straight out of the box. Whether you're recording vocals, musical instruments, a voiceover, or your latest podcast, the NT-USB's USB connectivity and onboard A/D conversion ensure that you'll get the job done quickly and easily. You also get everything you need to set up and record, including a tripod base, mic stand mount, pop filter, USB cable, and a padded carrying case. Compatible with Mac OS X, Windows 8, and iOS, the Rode NT-USB USB condenser microphone is your complete recording solution. Rode NT-USB USB Condenser Microphone at a Glance: All-in-one package lets you start recording straight out of the box Stereo headphone jack for zero-latency monitoring Cross-platform compatibility makes for a versatile recording solution All-in-one package lets you start recording straight out of the box The Rode NT-USB USB condenser microphone includes a premium pop filter that fits onto the base of the mic, ensuring perfect positioning for pro-quality reduction of those nasty-sounding plosives. You also get a high-quality stand mount, desktop tripod stand, and a storage pouch - everything you need to start recording. Stereo headphone jack for zero-latency monitoring If you want to monitor in real time while recording, the Rode NT-USB USB condenser microphone features a zero-latency stereo headphone jack. You also get dials that allow you to adjust the monitoring level and mix between your recorded audio and microphone input. Latency is a performance-killer. Luckily, the NT-USB takes this into account, ensuring that what you hear and what you play are in perfect sync. Cross-platform compatibility makes for a versatile recording solution No matter what platform or software you record with, the Rode NT-USB USB condenser microphone is ready to go to work. Fully compatible with all mainstream recording apps on both Macs and PCs, this USB microphone also works with an iPad running GarageBand, Rode Rec, or any other app that accepts an external microphone. Rode NT-USB USB Condenser Microphone Features: All-in-one package lets you start recording straight out of the box USB connectivity and onboard A/D conversion ensure simple, fast results Stereo headphone jack for zero-latency monitoring Dials to adjust the monitoring level and mix between recorded audio and microphone input Mac OS X, Windows 8, and iOS compatibility makes for a versatile recording solution

Behringer C-1 Studio Condenser Microphone Product Highlights Condenser Element Cardioid Pattern Wide Frequency Response Mic Case Included Behringer C-1 Overview The C-1 Studio Condenser Microphone from Behringer offers a cardioid pickup pattern for maximum sound source separation and feedback rejection. This low noise microphone is suitable for a wide range of recording scenarios, including project, professional, and home studio applications. There is a pressure gradient transducer and a shock-mounted large diaphragm capsule for open, transparent sound with high-quality transient response. It is constructed of a die-cast metal body for durability and features an LED light to indicate when the microphone is receiving phantom power. The C-1 includes a swivel mount and custom case. Cardioid Polar Pattern The cardioid polar pattern minimizes off-axis noise and feedback. Wide Frequency Response The C-1 features a 40 Hz to 20 kHz frequency response for accurate reproduction of vocals and instruments. Condenser Element The sensitive condenser element captures signal accurately and with low noise. Behringer C-1 Specs Analog Performance Operating Principle Pressure Gradient Transducer Condenser Diaphragm 0.63" / 16.0 mm Polar Pattern Cardioid Frequency Range 40 Hz to 20 kHz Maximum SPL 136 dB SPL THD 1% Impedance 100 Ohms Load Impedance 1000 Ohms Sensitivity -33 dB General Output Connectors 1 x 3-Pin XLR Operating Current Consumption 2.5 µA Operating Voltage 36 to 52 V Length 7.09" / 180.0 mm Diameter 2.13" / 54.0 mm Weight 0.93 lb / 0.42 kg Packaging Info Package Weight 2.05 lb Box Dimensions (LxWxH) 12.1 x 5.2 x 3.5" In the Box Behringer C-1 Studio Condenser Microphone Swivel Mount Custom Case Views: 3