Training automation selenium

Professional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336Professional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary. Installing, HVAC systems has become common in the recent days and also the required industry standard for construction of new buildings. Introduction to HVAC The need for HVAC References, standards and codes Terms, definitions and units HVAC system type overview Ventilation and air quality Buildings and energy efficiency Psychrometrics Properties of moist air Psychrometric chart Sensible and latent Combined processes Mixing of air streams Refrigeration Definitions Refrigerant selection Safety considerations Pressure and enthalpy Phase change concepts Vapor compression cycle System components Heating and Cooling Loads Loads and energy Heat transfer Weather data Infiltration and ventilation Cooling load calculations All Air Systems Definition of “all air systems” Types of all supply and return air systems Recirculating / Mixed Air Systems Dedicated Outside Air (DOAS) Systems Overhead / Dilution Type: Constant Volume (CAV) and Variable Volume (VAV) Displacement / UFAD Type Types of exhaust systems General – Toilet, etc. Laboratory, process, or other specialty systems Types of central equipment Packaged / Unitary systems Split systems Air handling units Fans Types of terminal equipment Air Terminal Units / VAV Boxes Grilles, Registers, & Diffusers System Comparison – Advantages / Disadvantages Hybrid approaches Applications / Examples Hydronic Systems Definition of “hydronics” Comparison to air systems Types of hydronic systems Heating Hot Water Chilled Water Condenser Water: Tower and Geo-exchange Glycol Water Types of central equipment Boilers Chillers Cooling Towers / Fluid Coolers Pumps Heat Exchangers Types of terminal equipment Coils Unit Heaters Fan Coil Units Chilled Beams Radiant System Comparison – Advantages / Disadvantages Steam and Steam Condensate Definition of “steam” Comparison to air and hydronic systems ASME Codes / Safety Types of steam and condensate systems Low Pressure High Pressure Condensate Collection: Gravity return, Pumped return, Vacuum Types of central equipment Boilers Heat Exchangers Make-up water systems Types of terminal equipment Coils Humidifiers Unit Heaters Fan Coil Units Radiant System Comparison - Advantages / Disadvantages Applications / Examples Field Tour - Wisconsin Energy Institute Controls: Building Automation Systems Definition / Purpose of “Building Automation System (BAS)” Types of HVAC control systems Local Centralized (Building-wide) Pneumatic Direct Digital Control Pneumatic-Hybrid Programmable Logic Control (PLC) Type of control equipment Valves Dampers Actuators Sensors and thermostats Types of Controls Proportional/Modulating Control Concepts Open/Closed Loop Control Wisconsin Energy Institute Sequence of Operations Mechanical Flow Diagrams INSTITUTE OF PROFESSIONAL AND TECHNICAL STUDIES (IPATS) Whatsapp: +92 3219606785, 03035530865 Call: +923315145601, 03495021336 Head Office: 2nd Floor, Yasir Plaza, Near Chatri Chowk, Khanna Pull, Qadeer Road, Rawalpindi, Pakistan Contact Office: +923219606785, 03035530865, 0331-5145601, 0349-5021336 Email: ipatsedu@gmail.com Website: www.ipatsedu.comProfessional Training of HVAC HEATING, VENTILATION,AIR CONDITIONING HVAC Course Heating, ventilation, and air conditioning (HVAC) is an indoor and vehicular environmental comforting technology. The technology aims to provide thermal comfort and high indoor air quality. The techniques of ventilating a building is further divided into a few types as mechanical, forced, and natural ventilation that will provide optimal temperature throughout the day and night. HVAC does the above function, through three different and integrated parts such as heating, ventilation, and air-conditioning at required points or wherever necessary from Oct 26th

"PLC SCADA and HMI Panels" Automation Training Course Duration: 6 Weeks, Saturday-Sunday (Total 60 Contact Hrs) Class: 10:00 AM to 2:00 PM Starting: Saturday, 14 Mar 2020 (1st Day FREE ????) SIEMENS PLCs 300/400/1200 in Totally Integrated Automation (TIA portal) Training material Full Course PDF format Practical Course Exercises Software Setup (TIA Portal 13, SCADA WinCC 7.5) Certification in PLC, SCADA and HMI Training Complete Hardware Training Kits Certified Professional Trainer with more than 15 years Industrial experience Fee installment options Course Content: Contact: +92 320 050 1217 Location: Islamabad Website: Views: 9

CCNP Enterprise v8 Curriculum Description In this curriculum, Cisco Networking Academy™ participants learn, apply, and practice CCNP Enterprise knowledge and skills through a series of in-depth hands-on experiences that reinforce their learning. The CCNP Enterprise v8 curriculum is presented in two courses that provide integrated and comprehensive coverage of professional-level networking technologies. Upon completion of each course, learners will be prepared to take the certification exam associated with that course. The two course are as follows: • CCNP Enterprise: Core Networking (CCNP ENCOR v8) – aligns to the Cisco Press CCNP and CCIE Enterprise Core ENCOR 350-401 Official Cert Guide and the Implementing Cisco Enterprise Network Core Technologies (ENCOR 350-401) certification exam. The ENCOR course includes implementation of core enterprise network technologies including dual stack (IPv4 and IPv6) architecture, virtualization, infrastructure, network assurance, security, and automation. • CCNP Enterprise: Advanced Routing (CCNP ENARSI v8) – aligns to the Cisco Press CCNP Enterprise Advanced Routing ENARSI 300-410 Official Cert Guide and the Implementing Cisco Enterprise Advanced Routing and Services (ENARSI 300- 410) certification exam. ENARSI includes implementation and troubleshooting of advanced routing technologies and services including Layer 3, VPN services, infrastructure security, infrastructure services, and infrastructure automation. These two courses and the corresponding certification exams align to the overall CCNP Enterprise certification. Both of these courses provide learners extensive opportunities for hands-on practical experience and career skills development. The CCNP Enterprise v8 curriculum includes the following features: • Primary source of content for the learner is the Cisco Press Official Cert Guides. • Assessments and practice activities are focused on specific certification competencies to increase retention. • Embedded assessments provide immediate feedback to support the evaluation of knowledge and acquired skills. • Hands-on labs help students develop critical thinking and complex problem-solving skills. • Cisco Packet Tracer simulation-based learning activities are added as optional instructor resources to support review of CCNA skills. • Video demonstrations give insight into complex workflows and processes and provides exposure to advance networking tools and operations. Career Institute Faisalabad Cisco Networking Academy Views: 5

Pass Robotic Process Automation (RPA) Certification Exam in 1st attempt Free Workshop 23-OCT-2022 at 12:00 PM (Location: ONLINE) 2 hours  ☎️ Gulshan-E-Iqbal Branch: T: +92 2134986664 M:03313929217 #WhatsApp 03122169325 DHA Karachi Office: M: 03333808376 T: +92 2135344600 Shahra-e-faisal: T: +92 2134556664 M: 03343182845 #robotics_artifical #intelligence_course #robotic_certification # training_program from Oct 23rd

*****PLC, HMI and SCADA Trainings in Faisalabad **** SIEMENS PLC - HMI - SCADA & Field Instruments Professional Training in Industrial Environment. For the first time in faisalabad , we are offering you a totally hands-on practical training which consists of: Quality training will be delivered by our Industrial professionals having vast experience in the field of automation. Certificates will be awarded on completing the training, Limited seats are available. • PLC • HMI • SCADA • Field Instrument Global Industrial Solutions www.mygisolution.com For further details, please feel free to contact us at: 0335-6021212 041-2429151 | info@mygisolution.com | trainings@mygisolution.com facebook page:- https://www.facebook.com/pages/Global-industrial-solutions/460817260786804 For Online Registration: https://docs.google.com/forms/d/1UkGvXjNDDajM-H4NtDox6G-dQXL175Y_II7Jn59kDoE/viewform?c=0&w=1

we provide job training "import export business / digital photography / office automation / school teacher training / BEd maths preparation .. 0 3 1 1 2 2 1 8 9 2 2 facebook/sirshahzadwaiz

FACILITIES MANAGEMENT TRAINING Date: 27-28 Jan 2016 Key Topics: •Ventilation, Air Conditioning and Heating systems •Electrical and Plumbing networks •Building system controls and Automation •Video Surveillance systems •Monitoring and management of Parking areas •Safety Equipment •Generators For more details log on to www.stceducation.org Contact:00971 50 8501454

Burraq Engineering Solutions is known as Best Industrial Automation Training Institute in Lahore Pakistan. Get trained by corporate trainers with real-time projects. Lab Facility Available: It is a fact that practical teachings are always better than theoretical knowledge. We deliver the best training in various courses such as PLC, SCADA, HMI, DRIVE, POWER-SERVO, AUTOCAD, SOLAR PANEL, etc.

Auto & Farm Machinery Technology Diploma Course in Islamabad O3165643400, O3363333792, Auto & Farm Machinery Technology Diploma Course in Islamabad Pakistan O3165643400, O3363333792 Auto & Farm Machinery Technology Diploma Course in Islamabad Pakistan Farm machinery, mechanical devices, including tractors and implements, used in farming to save labour. Farm machines include a great variety of devices with a wide range of complexity: from simple hand-held implements used since prehistoric times to the complex harvesters of modern mechanized agriculture. Auto & Farm Machinery Technology Course Outline Suspension, Steering & Brakes Workshop Practice Applied Thermodynamics Farm Machinery Crop Husbandry Motor Vehicle Inspection Fuel Injection & Carburetion Automotive Transmission A Computer Application in CAD & Automation Soils Fertilizers Farm Machinery Earth Moving Machinery Affiliated with NTB, Ministry of Federal Education & Technical Training Govt of Pakistan Traccert Canada International CAB Qualifications & Certifications(CABQC Canada) IPQI USA WSO World Safety Organization USA ABQC, UKAP UK ISO 9001 QMS Certified Organization. Auto & Farm Machinery Technology Diploma Course in Islamabad Pakistan O3165643400, O3363333792 Auto & Farm Machinery Technology Diploma Course in Islamabad Pakistan Farm machinery, mechanical devices, including tractors and implements, used in farming to save labour. Farm machines include a great variety of devices with a wide range of complexity: from simple hand-held implements used since prehistoric times to the complex harvesters of modern mechanized agriculture. Auto & Farm Machinery Technology Course Outline Suspension, Steering & Brakes Workshop Practice Applied Thermodynamics Farm Machinery Crop Husbandry Motor Vehicle Inspection Fuel Injection & Carburetion Automotive Transmission A Computer Application in CAD & Automation Soils Fertilizers Farm Machinery Earth Moving Machinery Affiliated with NTB, Ministry of Federal Education & Technical Training Govt of Pakistan Traccert Canada International CAB Qualifications & Certifications(CABQC Canada) IPQI USA WSO World Safety Organization USA ABQC, UKAP UK ISO 9001 QMS Certified Organization. Auto & Farm Machinery Technology Diploma Course in Islamabad Pakistan O3165643400, O3363333792 Auto & Farm Machinery Technology Diploma Course in Islamabad Pakistan Farm machinery, mechanical devices, including tractors and implements, used in farming to save labour. Farm machines include a great variety of devices with a wide range of complexity: from simple hand-held implements used since prehistoric times to the complex harvesters of modern mechanized agriculture. Auto & Farm Machinery Technology Course Outline Suspension, Steering & Brakes Workshop Practice Applied Thermodynamics Farm Machinery Crop Husbandry Motor Vehicle Inspection Fuel Injection & Carburetion Automotive Transmission A Computer Application in CAD & Automation Soils Fertilizers Farm Machinery Earth Moving Machinery Affiliated with NTB, Ministry of Federal Education & Technical Training Govt of Pakistan Traccert Canada International CAB Qualifications & Certifications(CABQC Canada) IPQI USA WSO World Safety Organization USA ABQC, UKAP UK ISO 9001 QMS Certified Organization.

Auto & Farm Machinery Technology Diploma Course in Islamabad O3165643400, o3363333792, Auto & Farm Machinery Technology Diploma Course in Islamabad Pakistan O3165643400, O3363333792 Auto & Farm Machinery Technology Diploma Course in Islamabad Pakistan Farm machinery, mechanical devices, including tractors and implements, used in farming to save labour. Farm machines include a great variety of devices with a wide range of complexity: from simple hand-held implements used since prehistoric times to the complex harvesters of modern mechanized agriculture. Auto & Farm Machinery Technology Course Outline Suspension, Steering & Brakes Workshop Practice Applied Thermodynamics Farm Machinery Crop Husbandry Motor Vehicle Inspection Fuel Injection & Carburetion Automotive Transmission A Computer Application in CAD & Automation Soils Fertilizers Farm Machinery Earth Moving Machinery Affiliated with NTB, Ministry of Federal Education & Technical Training Govt of Pakistan Traccert Canada International CAB Qualifications & Certifications(CABQC Canada) IPQI USA WSO World Safety Organization USA ABQC, UKAP UK ISO 9001 QMS Certified Organization. Auto & Farm Machinery Technology Diploma Course in Islamabad Pakistan O3165643400, O3363333792 Auto & Farm Machinery Technology Diploma Course in Islamabad Pakistan Farm machinery, mechanical devices, including tractors and implements, used in farming to save labour. Farm machines include a great variety of devices with a wide range of complexity: from simple hand-held implements used since prehistoric times to the complex harvesters of modern mechanized agriculture. Auto & Farm Machinery Technology Course Outline Suspension, Steering & Brakes Workshop Practice Applied Thermodynamics Farm Machinery Crop Husbandry Motor Vehicle Inspection Fuel Injection & Carburetion Automotive Transmission A Computer Application in CAD & Automation Soils Fertilizers Farm Machinery Earth Moving Machinery Affiliated with NTB, Ministry of Federal Education & Technical Training Govt of Pakistan Traccert Canada International CAB Qualifications & Certifications(CABQC Canada) IPQI USA WSO World Safety Organization USA ABQC, UKAP UK ISO 9001 QMS Certified Organization. Auto & Farm Machinery Technology Diploma Course in Islamabad Pakistan O3165643400, O3363333792 Auto & Farm Machinery Technology Diploma Course in Islamabad Pakistan Farm machinery, mechanical devices, including tractors and implements, used in farming to save labour. Farm machines include a great variety of devices with a wide range of complexity: from simple hand-held implements used since prehistoric times to the complex harvesters of modern mechanized agriculture. Auto & Farm Machinery Technology Course Outline Suspension, Steering & Brakes Workshop Practice Applied Thermodynamics Farm Machinery Crop Husbandry Motor Vehicle Inspection Fuel Injection & Carburetion Automotive Transmission A Computer Application in CAD & Automation Soils Fertilizers Farm Machinery Earth Moving Machinery Affiliated with NTB, Ministry of Federal Education & Technical Training Govt of Pakistan Traccert Canada International CAB Qualifications & Certifications(CABQC Canada) IPQI USA WSO World Safety Organization USA ABQC, UKAP UK ISO 9001 QMS Certified Organization. Views: 2

Shorthand Typing Advance Professional Diploma in Rawalpindi Shorthand Typing Advance Professional Diploma in Rawalpindi 303-5530865 , IPATS is affiliated with RCCI, SECP, SDA, TTB, TTPC, SDC & PSSC Government. course outline: Introducing Teeline 2:The Teeline alphabet 3:Joining letters 4:Removal of unnecessary letters 5:Position of writing 6:Punctuation 7:Write shorthand using correct techniques 8:Read and write shorthand notes 9:Write shorthand at optimum speed (minimum 60 wpm) with minimum 98% accuracy , What I’ve attempted to do is compile a short list of essential Teeline words that I think students and people in a business setting can use to write less and focus more. Teeline is supposed to be an easy-to-learn style of shorthand (as opposed to Gregg or Pitman), as almost all of the “letters” are based on their English equivalents (whereas Gregg and Pitman are phonetic). My goal here is not to turn you into a stenographer, but rather to improve your speed significantly with very little effort. Fluent shorthand is not a necessity for the average note-taker, and most don’t have the time to learn it , Some positions classified to specialized clerical series include a requirement for stenographic skill and competitive level typing skill to perform office automation work. For these positions, both Stenography and Office Automation must be added parenthetically to the position's title; i.e., Secretary (Stenography/Office Automation). This will insure recruitment of candidates with proper knowledge and skill levels for the position , assistant, or technical work with a requirement for a qualified stenographer. Positions such as these are classified according to the principles for classifying mixed series positions. In most cases, the series which represents the highest level of work performed will also be the series to which the position is classified. It is possible, however, that analysis of all the factors involved in classifying such a mixed series position will show that the position is properly classified to the series of the lower level work , Azad Kashmir,Course in Bagh, Course in Bhimber,Course in khuiratta, Course in Kotli, Course in Mangla, Mirpur, Muzaffarabad, Plandri, Rawalakot, Punch, Balochistan, Amir Chah, Bazdar, Bela, Bellpat, Bagh, Burj, Chagai, Chah Sandan, Chakku, Chaman, Chhatr, Dalbandin, Dera Bugti, Dhana Sar, Diwana, Duki, Dushi, Duzab, Gajar, Gandava, Garhi Khairo, Garruck, Ghazluna, Girdan, Gulistan, Gwadar, Gwash, Hab Chauki, Hameedabad, Harnai, Hinglaj, Hoshab, Ispikan, Jhal, Jhal Jhao, Jhatpat, Jiwani, Kalandi, Kalat, Kamararod, Kanak, Kandi, Kanpur, Kapip, Kappar, Karodi, Katuri, Kharan, Khuzdar, Kikki, Kohan, Kohlu, Korak, Lahri, Lasbela, Liari, Loralai, Mach, Mand, Manguchar, Mashki Chah, Maslti, Mastung, Mekhtar, Merui, Mianez, Murgha Kibzai, Musa Khel Bazar, Nagha Kalat, Nal, Naseerabad, Nauroz Kalat, Nur Gamma, Nushki, Nuttal, Ormara, Palantuk, Panjgur, Pasni, Piharak, Pishin, Qamruddin Karez, Qila Abdullah, Qila Ladgasht, Qila Safed, Qila Saifullah, Quetta, Rakhni, Robat Thana, Rodkhan, Saindak, Sanjawi, Saruna, Shabaz Kalat, Shahpur, Sharam Jogizai, Shingar, Shorap, Sibi, Sonmiani, Spezand, Spintangi, Sui, Suntsar, Surab,Thalo, Tump, Turbat, Umarao, pirMahal, Uthal, Vitakri, Wadh, Washap, Wasjuk, Yakmach, Zhob, NEBOSH course in Federally Administered Northern Areas/FANA, IPATS is fully affiliated with government of Pakistan. NTB (Natioanl Training Bureau ) IT Courses, Government of Pakistan. TTB KPK, Skill Development Course Lahore, Punjab, Paksitan, Professional Skill Science Council , TTPC, SDA, RCCI (Rawalpindi Chamber of Commerce & Industry),303-5530865

Certification in information Technology (CIT) Course In Rawalpindi Islamabad . ICTE offers different types of international Courses which are accepted in domestic country as well as in international coutries i.e China Japan Korea Saudia Dubai Muscat Oman Iran Tehran Qatar and all other international countries.Admission open for both boys and girls 03115193625.The Certificate in Information Technology (CIT) is an introductory program into the information systems discipline. ... It focuses on techniques, tools and methods used today in the development and use of computer-based applications..people are looking program or course which covers basics of Information Technology and also help them in the professional training for professional market and to the get job from assistant level. This CIT Course in Pakistan is also very renowned and required program in the different vicinity of Pakistan In the light of above scenario, the International, we International college of technical education Offers CIT course in Karachi and also offer live online CIT Course in Pakistan , which is accredited and recognized course or program has been developed by the core consultant team of IMRTC USA, which covers the required contents of the market and also give the opportunity to individuals that they can start his / her career in the field of Information Technology. Certification in Information Technology - CIT is the renowned training and most effective program. Certification in information Technology (CIT) Course In Rawalpindi Islamabad .The Program covers the Introduction of Information Technology, where basics and computer hardware and Networking program are being covered. Further, the program also covered the complete Office Automation part, where MS Office including MS Word, MS Excel, and MS PowerPoint with Internet shall also be covered. Further, the Program also covers the Graphical orientation with Adobe Photoshop and also gives the sound idea about Web designing through Adobe Dreamweaver. The last but not least the program has also covered the Basic of C# with Concepts of OOPS including .NET Framework shall be covered. The CIT - Certification in Information Technology program majorly covers the following: Introduction to Computers with Computer Hardware Office Automation (MS Word, MS Excel, MS Excel) Internet & Social Media Adobe Photoshop Web Designing through Dreamweaver C# Programming with .NET Framework Certification in information Technology (CIT) Course In Rawalpindi, Islamabad, Lahore, Karachi, Gilgit, Skardu, Ghangche, taxila, Shigar, Astore, Diamer, Ghizer, Kharmang, Gultari, Rondo, Hunza Nagar, Gupi, Azad Jammu and Kashmir, Muzaffarabad, Mirpur, Bhimber, Kotli, Rawlakot, Bagh, Bahawalpur, Bhakkar, Chakwal, Chiniot, Dera Ghazi Khan, Faisalabad, Gujranwala, Gujrat, Hafizabad, Jhang, Jhelum, Kasur, Khanewal, Khushab, Layyah, Lodharan, Mandi-Bahuddin, Mianwali, Multan, Muzaffargarh, Nankana Sahib, Narowal, Okara, Pakpattan, Rahim Yar Khan, Rajanpur, Sahiwal, Sargodha, Sheikhupura, Sialkot, Toba tek Singh, Vehari, Attock, Taxila, Wah Cantt, Rawalpindi, Balochistan, Khyber-Pakhtunkhwa, Punjab, Sindh, Gilgit Baltistan, Turbat, Sibi, Chaman, Lasbela, Zhob, Gwadar, Nasiraba, Jaffarabad, Hub, Dera Murad Jamali, Dera Allah Yar, Khyber-Pakhtunkhwa, Peshawar, Mardan, Abbottabad, Mingor, Kohat, Bannu, Swabi, Dera Ismail Khan, Charsadda, Nowshera, Mansehra, Hyderabad, Sukkur, Larkana, Nawabshah, Nanak wara, Mirpur Khas, Jacobabad, Shikarpur, Khairpur, Pakistan. Visit our website for further details of this course www.icollegete.com,www.courses.com.pk. International college of technical education offers different type of courses and diplomas out of which some are as follows:: Diploma in Telecommunication One year Diploma in Telecommunication Two years Diploma in Optical Fiber Diploma in CCTV technician Mechanical Technology Courses Diploma in Mechanical Technology One Year Diploma in Mechanical Technology Two Years Diploma in Project Management (DPM) Diploma in Hotel Management Diploma in Hospitality Management Diploma in Quality Assurance (QA) Diploma in Quality Control (QC) Diploma in Total Quality Management (TQM) Diploma in Import & Export Management Diploma in College and University Management Diploma in Auditing Diploma in Accounts Management Diploma in Fast Food Management Diploma in Flood Risk Management Diploma in Guest House Management Diploma in International Tourism Management Diploma in Energy Management Diploma in Library Management Diploma in Education Planning and Management Diploma in Management Information System (MIS) Diploma in Software Project Management Diploma in Business Administration and Management Diploma in Office Administration & Management Diploma in Interior Designing Diploma in BMS (Building Management System) Hospitality Management Course in rawalpindi Hospitality Management Course in lahore Hospitality Management Course in peshawar Building Management System (BMS) Course in rawalpindi Building Management System (BMS) Course in lahore Building Management System (BMS) Course in peshawar Quality Assurance Quality Control Course in rawalpindi Quality Assurance Quality Control Course in lahore Quality Assurance Quality Control Course in

AutoCAD is a commercial software application for 2D and 3D computer-aided design (CAD) and drafting — available since 1982 as a desktop application and since 2010 as a mobile web- and cloud-based app marketed as AutoCAD 360 Developed and marketed by Autodesk, Inc.,[1] AutoCAD was first released in December 1982, running on microcomputers with internal graphics controllers.[2] Prior to the introduction of AutoCAD, most commercial CAD programs ran on mainframe computers or minicomputers, with each CAD operator (user) working at a separate graphics terminal. AutoCAD is used across a wide range of industries, by architects, project managers, engineers, graphic designers, and other professionals. It is supported by 750 training centers worldwide as of 1994. As Autodesk's flagship product, by March 1986 AutoCAD had become the most ubiquitous CAD program worldwide.[4] Contents [hide] 1 History 2 Design 2.1 File formats and versions 2.1.1 Compatibility with other software 2.2 Languages 2.3 Extensions 2.4 Vertical integration 3 Variants 3.1 AutoCAD LT 3.2 AutoCAD 360 3.3 Student versions 4 Ports 4.1 Android 4.2 Microsoft Windows 4.3 Mac OS 5 See also 6 References 7 External links AutoCAD was derived from a program begun in 1977 and released in 1979[5] called Interact CAD, also referred to in early Autodesk documents as MicroCAD, which was written prior to Autodesk's (then Marinchip Software Partners) formation by Autodesk cofounder Mike Riddle. The first version by Autodesk was demonstrated at the 1982 Comdex and released that December.[8] The 2016 release marked the 30th major release of AutoCAD for Windows. The 2014 release marked the fourth consecutive year of AutoCAD for Mac. Design[edit] File formats and versions[edit] The native file format of AutoCAD is .dwg. This and, to a lesser extent, its interchange file format DXF, have become de facto, if proprietary, standards for CAD data interoperability, particularly for 2D drawing exchange.[citation needed] AutoCAD has included support for .dwf, a format developed and promoted by Autodesk, for publishing CAD data. Autodesk's logo and, respectively, AutoCAD icons have changed for several versions through the years. ESRI ArcMap 10 permits export as AutoCAD drawing files. Civil 3D permits export as AutoCAD objects and as LandXML. Third-party file converters exist for specific formats such as Bentley MX GENIO Extension, PISTE Extension (France), ISYBAU (Germany), OKSTRA and Microdrainage (UK);[10] also, conversion of .pdf files is feasible, however, the accuracy of the results may be unpredictable or distorted, as that of jagged edges. Languages[edit] AutoCAD 2014 and AutoCAD LT 2014 are available for English, German, French, Italian, Spanish, Japanese, Korean, Chinese Simplified, Chinese Traditional and Brazilian Portuguese.[11][12] Russian, Czech, Polish, Hungarian will be available later on. The extent of localization varies from full translation of the product to documentation only. The AutoCAD command set is localized as a part of the software localization. Extensions[edit] AutoCAD supports a number of APIs for customization and automation. These include AutoLISP, Visual LISP, VBA, .NET and ObjectARX. ObjectARX is a C++ class library, which was also the base for: a) products extending AutoCAD functionality to specific fields; b) creating products such as AutoCAD Architecture, AutoCAD Electrical, AutoCAD Civil 3D; or c) third-party AutoCAD-based application. There are a large number of AutoCAD plugins (add-on applications) available on the application store Autodesk Exchange Apps .[13] AutoCAD's DXF, drawing exchange file, allows importing and exporting drawing information. Vertical integration[edit] Autodesk has also developed a few vertical programs (AutoCAD Architecture, AutoCAD Civil 3D, AutoCAD Electrical, AutoCAD ecscad, AutoCAD Map 3D, AutoCAD Mechanical, AutoCAD MEP, AutoCAD Structural Detailing, AutoCAD Utility Design, AutoCAD P&ID and AutoCAD Plant 3D) for discipline-specific enhancements. For example, AutoCAD Architecture (formerly Architectural Desktop) permits architectural designers to draw 3D objects, such as walls, doors and windows, with more intelligent data associated with them rather than simple objects, such as lines and circles. The data can be programmed to represent specific architectural products sold in the construction industry, or extracted into a data file for pricing, materials estimation, and other values related to the objects represented. Additional tools generate standard 2D drawings, such as elevations and sections, from a 3D architectural model. Similarly, Civil Design, Civil Design 3D, and Civil Design Professional support data-specific objects, facilitating easy standard civil engineering calculations and representations. Civil 3D was originally developed as an AutoCAD add-on by a company in New Hampshire called Softdesk (originally DCA). Softdesk was acquired by Autodesk, and Civil 3D was further evolved. Variants[edit] AutoCAD LT[edit] AutoCAD LT is the lower cost version of AutoCAD, with reduced capabilities, first released in November 1993. Autodesk developed AutoCAD LT to have an entry-level CAD package to compete in the lower price level. AutoCAD LT, priced at $495, became the first AutoCAD product priced below $1000. It is sold directly by Autodesk and can also be purchased at computer stores (unlike the full version of AutoCAD, which must be purchased from official Autodesk dealers). As of the 2011 release the AutoCAD LT MSRP has risen to $1200. While there are hundreds of small differences between the full AutoCAD package and AutoCAD LT, there are a few recognized major differences[14] in the software's features: 3D Capabilities: AutoCAD LT lacks the ability to create, visualize and render 3D models as well as 3D printing. Network Licensing: AutoCAD LT cannot be used on multiple machines over a network. Customization: AutoCAD LT does not support customization with LISP, ARX, and VBA. Management and automation capabilities with Sheet Set Manager and Action Recorder. CAD standards management tools. AutoCAD LT 2015 introduced Desktop Subscription from $360 per year AutoCAD 360[edit] Formerly marketed as AutoCAD WS, AutoCAD 360 is an account-based mobile and web application enabling registered users to view, edit, and share AutoCAD files via mobile device and web[15] using a limited AutoCAD feature set — and using cloud-stored drawing files. The program, which is an evolution and combination of previous products, uses a freemium business model with a free plan and two paid levels — marketed as Pro ($4.99 monthly or $49.99 yearly) and Pro Plus ($99.99 yearly) — including various amounts of storage, tools, and online access to drawings. 360 includes new features such as a "Smart Pen" mode and linking to third-party cloud-based storage such as Dropbox. Having evolved from Flash-based software, AutoCAD 360 uses HTML5 browser technology available in newer browsers including Firefox and Google Chrome. AutoCAD WS began with a version for the iPhone and subsequently expanded to include versions for the iPod Touch, iPad, Android phones, and Android tablets.[16] Autodesk released the iOS version in September 2010,[17] following with the Android version on April 20, 2011.[18] The program is available via download at no cost from the App Store (iOS), Google Play (Android) and Amazon Appstore (Android) In its initial iOS version, AutoCAD WS supported drawing of lines, circles, and other shapes; creation of text and comment boxes; and management of color, layer, and measurements — in both landscape and portrait modes. Version 1.3, released August 17, 2011, added support of unit typing, layer visibility, area measurement and file management.[15] The Android variant includes the iOS feature set along with such unique features as the ability to insert text or captions by voice command as well as manually.[18] Both Android and iOS versions allow the user to save files on-line — or off-line in the absence of an Internet connection. In 2011, Autodesk announced plans to migrate the majority of its software to "the cloud", starting with the AutoCAD WS mobile application. According to a 2013 interview with Ilai Rotbaein, an AutoCAD WS Product Manager for Autodesk, the name AutoCAD WS had no definitive meaning, and was interpreted variously as Autodesk Web Service, White Sheet or Work Space. Student versions[edit] AutoCAD is licensed, for free, to qualifying students and teachers, with a 18-month renewable license available. The student version of AutoCAD is functionally identical to the full commercial version, with one exception: DWG files created or edited by a student version have an internal bit-flag set (the "educational flag"). When such a DWG file is printed by any version of AutoCAD (commercial or student) older than AutoCAD 2014 SP1, the output includes a plot stamp / banner on all four sides. Objects created in the Student Version cannot be used for commercial use. Student Version objects "infect" a commercial version DWG file if it is imported in older versions than AutoCAD 2015. The Autodesk Education Community provides registered students and faculty with free access to different Autodesk applications. Ports[edit] Android[edit] Autodesk AutoCAD 360 is the official AutoCAD mobile app for Android. Microsoft Windows[edit] AutoCAD is a software package created for Windows and usually any new AutoCAD version supports the current Windows version and some older ones. AutoCAD 2016 supports Windows 7 up to Windows Mac OS[edit] Autodesk stopped supporting Apple's computers in 1994. Over the next several years, no compatible versions for Macintosh computers were released. In 2010 Autodesk announced that it would once again support Apple's Mac OS X software in the future.[24] Most of the features found in the 2012 Windows version can be found in the 2012 Mac version. The main difference is the user interface and layout of the program. The interface is designed so that users who are already familiar with Apple's OS X software will find it similar to other Mac applications.[17] Autodesk has also built in various features in order to take full advantage of Apple's Trackpad capabilities as well as the full-screen mode in Apple's OS X Lion.[16][17] AutoCAD 2012 for Mac supports both the editing and saving of files in DWG formatting that will allow the file to be compatible with other platforms besides the OS X.[16] AutoCAD 2014 for Mac supports Apple Mac OS X v10.9.0 or later (Mavericks), OS X v10.8.0 or later (Mountain Lion) with 64-bit Intel processor. AutoCAD LT 2013 is now available through the Mac App Store for $899.99. The full featured version of AutoCAD 2013 for Mac, however, is not available through the Mac App Store due to the price limit of $999 set by Apple. AutoCAD 2014 for Mac is available for purchase from Autodesk's Web site for $4,195 and AutoCAD LT 2014 for Mac for $1,200, or from an Autodesk Authorized Reseller.[24] See also[edit] 3ds Max AutoCAD Architecture Autodesk Autodesk Maya Autodesk Revit AutoShade AutoSketch Comparison of computer-aided design editors Design Web Format Tekla Structures SketchUp

CCNAv7: Introduction to Networks CCNAv7: Switching, Routing, and Wireless Essentials CCNAv7: Enterprise Networking, Security, and Automation CCNAv7: Bridging CCNAv7: Introduction to Networks CCNAv7: Switching, Routing, and Wireless Essentials CCNAv7: Enterprise Networking, Security, and Automation CCNAv7: Bridging CCNA Training Exam Material Certification Contact at 0301-7640931 Contact at 0301-7640931 Contact at 0301-7640931 Contact at 0301-7640931 from Jul 10th

CIT Certificate Information Technology Course in Rawalpindi Ghori Town Pakistan,international college of technical education in rawalpindi islamabad pakistan,best cit institute in rawalpindi islamabad pakistan,professional advance cit course in rawalpindi islamabad pakistan,lowest fee cit course in rawalpindi punjab pakistan,admission open for boys and girls new session start on 12 september 2020 certificaton acceptable in government job and worldwide UK/USA/KSA/CHINA JAPAN International College of Technical Education.Head Office :Office # 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 0311-5193625, 0092-335-4176949, This Office Automation training course is aimed for students, who aspire to pursue their employment in the office. This course is designed to provide students professional competencies and equip them with the skills-set that can be applied in the offices in general. You will be given to exposure to introduction to computers, Microsoft Office, Data Entry, document preparation, filing, office skills, and related job terminologies. You need to have a basic knowledge and familiarity with basic operating system before getting admission into Office Automation course. Right from the very first day at ICTE Tech, you will be given direct exposure to practical knowledge base along with the theory that makes our students distinctive in the industry.Computer Department was started to meet the challenges of information age. This department meets the demand of the new millennium and strives to help educate and train people so that they are prepared not only to contribute to further growth of IT, but also to understand and fully enjoy the services and capability that are available. The course offers by Computer Department owes its emergence to the relentlessly growing demand of professionals with expertise in area of computer, communications and information processing technologies. lt also aims to produce the trained manpower in the field of information technology.The Certificate course in Information Technology is intended to provide students with a wide range of technical and technological skills required by industry at the Certificate and diploma level. The course is designed to provide a flexible modular alternative to the other structured courses and thereby take advantage of the varied Information Technology market.uni enrol college certificate information technology Canada courses in Pakistan health online,graduate certificate information technology management institute of computer sciences free online certification iv jobs in Pakistan,certificate information technology notes state in 2 online course ignou,certificate iv information technology online networking certification in 6 month labs.Information Technology (IT) career prospects continue to point to an increasing demand for qualified people in this field. Many of our potential students are professionals and people in the workforce who are seeking ways to better adapt to a changing work environment where IT is now prevalent; others are students who recognize the added value that IT brings to their professional interests and fields of expertise. The certificate has been designed with these people in mind.The Certificate in Information Technology (CIT) is an introductory program into the information systems discipline. It covers fundamental concepts and operation into the technology and operation of modern information systems. It focuses on techniques, tools and methods used today in the development and use of computer-based applications. The program will be offered to non-College of Management or non-Degree seeking students. CIT Course Contents: Computer Hardware Basics of programming Basics of Software Basics of Networking Internet Technology Basics of Database management Multimedia Basics of Information System www.icollegete.com www.courses.com.pk International College of Technical Education.Head Office :Office # 27, Second Floor, Maryam Shadi Hall Plaza (Airies Plaza), Shamsabad, Murree Road, Rawalpindi, Pakistan 0311-5193625CIT Certificate Information Technology Course in Pwd Islamabad Pakistan.