Sink thermal

Heat Sink Thermal Grease Paste Grey HY510 For CPU 1Gram This thermal grease is used for most PC and tablet accessories such as CPU, chipset, etc. Syrnge shape can help to use this crease sufficiently and heat evenly. High heat conduction, high insulation. High temperature-resistant nonvolatile. High-grade stability and reliability. Apply to CPU, VGA, chipset, radiator, and other PC components. Helps disperse the heat from the CPU to the heatsink effectively. Low thermal resistance and high conductivity or superior heat transfer. High-temperature resistance. Non-toxic, tasteless, non-corrosive. Weight: 1g Uses: CPU, Graphics, And Other Hot Chips Thermal Conductivity: > 1.93 W/m-K Thermal Resistance: < 0.225°C-in⊃2;/W Syrnge Shape, Nontoxic, Odorless, Non-corrosive

Heat Sink Thermal Grease Paste Grey HY510 For CPU 30Grams This thermal grease is used for most PC and tablet accessories such as CPU, chipset, etc. Syrnge shape can help to use this crease sufficiently and heat evenly. High heat conduction, high insulation. High temperature-resistant nonvolatile. High-grade stability and reliability. Apply to CPU, VGA, chipset, radiator, and other PC components. Helps disperse the heat from the CPU to the heatsink effectively. Low thermal resistance and high conductivity or superior heat transfer. High-temperature resistance. Non-toxic, tasteless, non-corrosive. Weight: 30g Uses: CPU, Graphics, And Other Hot Chips Thermal Conductivity: > 1.93 W/m-K Thermal Resistance: < 0.225°C-in⊃2;/W Syrnge Shape, Nontoxic, Odorless, Non-corrosive

this paste is basically a thermally conductive material. this paste used as an interface between the heat sink and heat sources. this paste can be used in high-power semiconductor devices. this heat sink paste is used to fill the space and all imperfections on the heat sink. Non-toxic,tasteless,non-corrosive Primary Use:Thermal coupling of electrical/electronic devices to heat sinks Special Properties:High conductivity;low bleed;Stable at high temperatures it has the capability of withholding 300-degree centigrades. it saves the loss of heat which causes the loss in the heat sink’s performance.

99.99% brand new and high quality thermal grease paste Non-toxic, tasteless, non-corrosive High stability and reliability Low thermal resistance and high thermal conductivity Apply to CPU, VGA,LED Chipset and other PC components Compliance with RoHS REACH PFOS requirement Material: Silicone Grease Net Weight: 10g Thermal conductivity: > 1.93 W/m-k Thermal Impedance: <0.225 Specific Gravity: >2.0 Viscosity: 1000 Concentration: 380±10 1/10mm Working temperature: ?50-300°

1.High Grade Stability And Reliability. 2.Apply to CPU, VGA, Chipset, Radiator And Other PC Components. 3.Helps Disperse The Heat From CPU To Heatsink Effectively. 4.Low Thermal Resistance And High Conductivity For Superior Heat Transfer. 5.High Temperature Resistance. Non-toxic, Tasteless, Non-corrosive.

High grade stability and reliability. Apply to CPU, VGA, chipset, radiator and other PC components. Helps disperse the heat from CPU to heatsink effectively. Low thermal resistance and high conductivity or superior heat transfer. High temperature resistance. Non-toxic, tasteless, non-corrosive.

High Grade Stability And Reliability. Apply to CPU, VGA, Chipset, Radiator And Other PC Components. Helps Disperse The Heat From CPU To Heatsink Effectively. Low Thermal Resistance And High Conductivity For Superior Heat Transfer. High Temperature Resistance. Non-toxic, Tasteless, Non-corrosive.

Thermal Grease Paste Compound Silicone for CPU Heat Sink The Heat Sink Paste is metal-free and non-electrical conductive which eliminates any risks of causing short circuit, adding more protection to the CPU and VGA cards. Thermal coupling of electrical / electronic device to heat sinks High Thermal Conductivity, Low Bleed and Stable at high temperature

KRYONAUT The  Kryonaut thermal  paste was specially developed for the extremely demanding applications and the highest demands of the overlocking community.  Kryonaut  is also recommended as a top product for critical cooling systems in the industrial sector. Especially for overclocking Excellent thermal conductivity No curing High long-term stability Not electrically conductive Applicable to aluminum coolers (warning label is exclusively for Conductonaut!) operation area Rating Thermal conductivity ***** Sub-zero overclocking ***** Overclocking ***** Water cooling ***** Air cooling ***** Silicone sensitive applications - "Kryo" - the Greek word for "cold", which is also used in cryotechnology - indicates that the   Kryonaut  thermal paste is specially designed for use in the low-temperature range - it was developed for the true "cryonauts" among the "extreme overclockers". Kryonaut  uses a special support structure that does not begin to dry out even at 80 ° C. This support structure ensures that the nano-aluminium and zinc oxide components of the paste are optimally combined and unevenness in the heat carrier (e.g. the CPU) and a heat sink (e.g. heat sink) are optimally compensated for with excellent thermal conductivity.

Features: High Quality thermal Paste, Grease High conductivity, low bleed, stable at high temperatures. Type: silicone fluid with 20% metal oxide. Thermal conductivity: >0.65 W/m-k. Thermal resistance: >0.262 C-in2/w. Dielectric breakdown: >5.0 KV ac. Weight of each tube: 1g. Suitable for CPU, VGA, Heat sink, Peltier What is Included in this Package ?: 1 x Thermal Grease Note: Price is for single item only

Features: Brand new & High Quality. High conductivity, low bleed, stable at high temperatures. Type: silicone fluid with 20% metal oxide. Thermal conductivity: >0.65 W/m-k. Thermal resistance: >0.262 C-in2/w. Dielectric breakdown: >5.0 KV ac. Weight of each tube: 1g. Suitable for CPU, VGA, Heat sink, Peltier Package Included: 1 x Thermal Compound

GD900 Thermal Paste Grease Heat Sink Compound High Performance Net Weight 1 Gram For CPU GPU Cooler Gray Conductive Cooling Fan Processors Silicone Plaster

Cooler Master HTK-002 thermally conductive compounds are grease-like silicone materials, heavily filled with heat conductive metal oxides. This combination promotes high thermal conductivity, low bleed, and high-temperature stability. These compounds resist changes in consistency at temperatures up to 177°C (350°F), maintaining a positive heat sink seal to improve heat transfer from the electronic device to the heat sink or chassis, thereby, increasing the overall efficiency of the device. Suitable for CPU, chipsets on Mainboard, VGA card, etc. Easy to use. ZIF Socket Templates ensure correct applying area with various CPU socket types. Produces an even layer when using the applicator. Dielectric. Wide range of application temperature

M2 solid-state SSD all aluminum heat sink. High speed heat dissipation, protect hard disk, extend the service life of hard disk All aluminum alloy, fast cooling. Made of all aluminum alloy, three-layer hollow cooling deck design, heat dissipation is fast, hard disk use is more stable, game / office is not stuck It is equipped with 3 pieces of thermal conductive silica gel, which can quickly consume the heat of the hard disk through the heat sink. It can protect the hard disk data from loss It is compatible with nvme / ngff dual protocol hard disk. It is suitable for mvme + ngff SSD, and compatible with 22x80 SSD

At the same time, the product is sticky and easy to use. The silica gel sheet is made of a flexible silicone thermal conductive material with stable heat conduction, insulation properties, and softness and elasticity. It is placed between the heater and The pad is specially designed for the use of heat transfer through the interval, which can fill the interval and effectively transfer the heat of the heat-generating component to the heat sink. Thermally conductive silicone sheet has excellent thermal conductivity to meet the thermal insulation requirements of most electronic products. Applicable to graphics card North-South bridge, home appliances, high-speed hard drive, micro heat pipe radiator, high-power, LED industry. Good thermal conductivity, insulation, viscosity, elasticity, low heat resistance, filling.

High thermal conductive Insulation Heat-resistant Thermal conductivity: >0.965 W/m.k Thermal impedance: >0.225°C.in/k Temperature range: -30~180°C Silicone Compounds: 50% Carbon Compounds: 20% Metal Oxide Compounds: 30>#/p### Other types of pastes are also available on our web with delivery to any city in Pakistan. Website http://electronicspanga.com

Clean up the surface. Use Thermal Grease on the CPU/GPU surface center. Using scraper or other tools to smear the thermal paste onto the CPU. After coating the product，the thickness is based on A4 paper thickness. Color:Gray Specific Gravity: 2.3 G/Cc Thermal Conductivity: 4.8 W/M-K Operating Temperature: -58~392 Degrees Fahrenheit

The pad is specially designed for the use of heat transfer through the interval, which can fill the interval and effectively transfer the heat of the heat-generating component to the heat sink. Applicable to graphics card North-South bridge, home appliances, high-speed hard drive, micro heat pipe radiator, high-power, LED industry. Thermally conductive silicone sheet has excellent thermal conductivity and meets the thermal insulation requirements of most electronic products. The pad has viscosity, simple and convenient application, stable heat conduction, insulation and softness and flexibility. Good thermal conductivity, insulation, viscosity, elasticity, low heat resistance, filling.

durable, firm and stable for us to use.for easily installation.The thermal pads can use to fill the master chip and flash memory chips height and increase the cooling effect.Nano heat-conducting silica gel pad. Good ductility, compatible with uneven surfaces. Low viscosity, easy to Remove.Groove design greatly Increases the heat dissipation area, with 5 Celsius- 15 Celsius cooling effect (varies depending on the environment).Universal fit for 22 x 80 size (22x80mm) M.2 NVME SSD.

Description: Details iShopping.pk brings you the best price for TP-Link AC1200 Wireless Dual Band PCI Express Adapter (Archer T4E) with express shipping all over Pakistan.   802.11ac - Dual Band Wi-Fi for Faster Connections TP-LINK's Archer T4E supports the advanced Wi-Fi standard of IEEE 802.11ac, offering 3 times transferring rates as IEEE 802.11n. You can send emails and browse the web with 2.4GHz network, while keeping the speedy 5GHz band free for gaming, HD streaming and other bandwidth intensive applications. Greater Coverage  with Beamforming Beamforming technology smartly focuses Wi-Fi signals towards connected devices for stable connections and boosted range. Heat Sink for Ultimate Stability A heat sink helps to dissipate the thermal energy generated by the adapter, which in turn improves stability. Additionally, lower temperatures help to extend the product lifespan. External Antennas for More Targeted signal Two external antennas utilize the latest wireless technology to achieve stable connections and boosted coverage. Easy Setup Simple software installation with the intuitive Utility on the provided CD Advanced Security WAP,WPA/WPA2,WPA-PSK/WPA2-PSK encryption standards ensure your data is safe from intruders Operating System Supports Windows 10/8.1/8/7/XP(32/64 bit) Low-Profile Bracket In addition to the standard bracket, a low-profile bracket is also provided for mini tower computer cases   Specification: HARDWARE FEATURES Interface PCI Express Dimensions (W x D x H) 4.8 x 4.5 x 0.85 in (120.8*115.2*21.5 mm) Antenna Type 2 Dual Band Detachable Antennas WIRELESS FEATURES Wireless Standards IEEE 802.11ac/n/a 5 GHz IEEE 802.11n/g/b 2.4 GHz Signal Rate 5 GHz 11ac: Up to 867 Mbps(dynamic) 11n: Up to 300 Mbps(dynamic) 11a: Up to 54 Mbps(dynamic) 2.4 GHz 11n: Up to 300 Mbps(dynamic) 11g: Up to 54 Mbps(dynamic) 11b: Up to 11 Mbps(dynamic) Reception Sensitivity 5 GHz: 11ac HT80: -59.5 dBm 11ac HT40: -63 dBm 11ac HT20: -68 dBm 11n HT40: -70 dBm 11n HT20: -73 dBm 11a 54Mbps: -76 dBm 11a 6Mbps: -92 dBm 2.4GHz: 11n HT40: -67.5 dBm 11n HT20: -70 dBm 11g 54Mbps: -72 dBm 11b 11Mbps: -86.5 dBm Transmit Power 5 GHz: 24 dBm(FCC) / 23dBm(CE) (EIRP) 2.4 GHz: 25 dBm(FCC) / 20dBm(CE) (EIRP) Wireless Modes Infrastructure mode Wireless Security Support 64/128 bit WEP, WPA/WAP2, WPA-PSK/WPA2-PSK, 802.1x Modulation Technology DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM, 256-QAM OTHERS Certification CE, FCC, RoHS Package Contents AC1200 Wireless Dual Band PCI Express Adapter Archer T4E Low-Profile Bracket Quick Installation Guide Resource CD System Requirements Windows 10/8.1/8/7/XP (32/64bit) Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing

TP-Link Archer T4E AC1200 Wireless Dual Band PCI Express Adapter Price & Specs Easy Installation – Plug the adapter into an available PCI-E slot to upgrade your desktop High Speed Wi-Fi – Up to 1200 Mbps Wi-Fi speeds (867 Mbps on 5 GHz band and 300 Mpbs on 2.4 GHz band)* 802.11ac Dual Band – 3 times faster than the 802.11n standard, perfect for high-intensity network usage Beamforming – Wi-Fi signals are strengthened towards certain direction where client exists Multiple-Size Brackets – Low profile and full heigh brackets are both provided, suitable for all PCs 2×2 MIMO – Users can easily access to high-speed wireless connection Broad Wireless Range – Two external antennas ensure greater Wi-Fi coverage and enhanced stability AC1200 Wireless Dual Band PCI Express Adapter Archer T4E 802.11ac - Dual Band Wi-Fi for Faster Connections TP-LINK's Archer T4E supports the advanced Wi-Fi standard of IEEE 802.11ac, offering 3 times transferring rates as IEEE 802.11n. You can send emails and browse the web with 2.4GHz network, while keeping the speedy 5GHz band free for gaming, HD streaming and other bandwidth intensive applications. 867 Mbps 5 GHz Band 300 Mbps 2.4 GHz Band Greater Coverage with Beamforming Beamforming technology smartly focuses Wi-Fi signals towards connected devices for stable connections and boosted range. Other AC Adapter Beamforming Archer T4E Heat Sink for Ultimate Stability A heat sink helps to dissipate the thermal energy generated by the adapter, which in turn improves stability. Additionally, lower temperatures help to extend the product lifespan. Aluminum Alloy   External Antennas for More Targeted signal Two external antennas utilize the latest wireless technology to achieve stable connections and boosted coverage. Easy Setup Simple software installation with the intuitive Utility on the provided CD Advanced Security WAP,WPA/WPA2,WPA-PSK/WPA2-PSK encryption standards ensure your data is safe from intruders Operating System Supports Windows 10/8.1/8/7/XP(32/64 bit)** Low-Profile Bracket In addition to the standard bracket, a low-profile bracket is also provided for mini tower computer cases *Maximum wireless transmission rates are the physical rates derived from IEEE Standard 802.11 specifications. Range and coverage specifications are based upon test results under normal usage conditions. Actual wireless transmission rate and wireless coverage are not guaranteed, and will vary as a result of 1) environmental factors, including building materials, physical objects and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead and 3) client limitations, including rated performance, location, connection quality, and client condition. HARDWARE FEATURES Interface PCI Express Dimensions (W x D x H) 4.8 x 4.5 x 0.85 in (120.8*115.2*21.5 mm) Antenna Type 2 Dual Band Detachable Antennas   WIRELESS FEATURES Wireless Standards IEEE 802.11ac/n/a 5 GHz IEEE 802.11n/g/b 2.4 GHz Signal Rate 5 GHz 11ac: Up to 867 Mbps(dynamic) 11n: Up to 300 Mbps(dynamic) 11a: Up to 54 Mbps(dynamic) 2.4 GHz 11n: Up to 300 Mbps(dynamic) 11g: Up to 54 Mbps(dynamic) 11b: Up to 11 Mbps(dynamic) Reception Sensitivity 5 GHz: 11ac HT80: -59.5 dBm 11ac HT40: -63 dBm 11ac HT20: -68 dBm 11n HT40: -70 dBm 11n HT20: -73 dBm 11a 54Mbps: -76 dBm 11a 6Mbps: -92 dBm 2.4GHz: 11n HT40: -67.5 dBm 11n HT20: -70 dBm 11g 54Mbps: -72 dBm 11b 11Mbps: -86.5 dBm Transmit Power 5 GHz: 24 dBm(FCC) / 23dBm(CE) (EIRP) 2.4 GHz: 25 dBm(FCC) / 20dBm(CE) (EIRP) Wireless Modes Infrastructure mode Wireless Security Support 64/128 bit WEP, WPA/WAP2, WPA-PSK/WPA2-PSK, 802.1x Modulation Technology DBPSK, DQPSK, CCK, OFDM, 16-QAM, 64-QAM, 256-QAM   OTHERS Certification FCC, RoHS Package Contents AC1200 Wireless Dual Band PCI Express Adapter Archer T4E Low-Profile Bracket Quick Installation Guide Resource CD System Requirements Windows 10/8.1/8/7/XP (32/64bit) Environment Operating Temperature: 0℃~40℃ (32℉~104℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing

TP-Link Archer TX50E AX3000 Wi-Fi 6 Bluetooth 5.0 PCIe Adapter Price in Pakistan Archer TX50E AX3000 Wi-Fi 6 Bluetooth 5.0 PCIe Adapter AX3000 Wi-Fi 6 Speeds:  Reach incredible speeds up to 2.4 Gbps (2402 Mbps on 5 GHz or 574 Mbps on 2 4 GHz), ultra-low latency and uninterrupted connectivity using Wi-Fi 6 technology such as 1024-QAM and 160 MHz bandwidth.†‡ Minimized Lag for Your PC:  Revolutionary OFDMA and MU-MIMO technology reduces lag so you can enjoy ultra-responsive real-time gaming or an immersive VR experience on even the busiest of networks. ‡ Broader Range:  Two powerful signal-boost high-gain antennas greatly increase range for a smoother online experience further away. Bluetooth 5.0 for Greater Speeds and Range:  Archer TX50E achieves 2x faster speeds and 4x broader range so you can connect your favorite devices such as game controllers, headphones, and keyboards for the ultimate setup.*** Cutting-Edge WPA3:  Protect your network with the latest WPA3 security protocol so your information is secure from hackers.** Premium quality & Performance:  Gold plating and a customized heat sink improve connection stability and efficiency ensuring ultimate performance. Support Compatibility:  Supports Windows 10 (64bit) only - Driver installation required via Website or included CD.**** Give Your PC Wi-Fi 6 and Bluetooth 5.0 AX3000 Wi-Fi 6 Bluetooth 5.0 PCIe Adapter Archer TX50E High Performance for High Demands The very latest WiFi standard, Wi-Fi 6, provides extreme speed, ultra-low latency, and uninterrupted connectivity so you enjoy faster downloads, smoother streaming, and more immersive gaming.† 1Gbps Traditional Tethered Gaming: 1Gbps 2.4Gbps with PCIe TX50E with PCIe TX50E Wi-Fi 6 Gaming: 2.4 Gbps Deep-Dive into VR Wi-Fi 6 comes with 1024-QAM and 160 MHz bandwidth, for powerful, continuous WiFi.‡ Bandwidth-intensive applications like VR demand high speeds, which Wi-Fi 6 delivers—3× faster than Wi-Fi 5.§ Just insert Archer TX50E into your PC for fully immersive VR experiences. Lag No More Revolutionary OFDMA reduces latency by up to 75% to provide ultra-responsive gaming, uninterrupted video chatting and seamless live streaming.* Latency High-Gain Antennas for Broader Coverage Two powerful signal-boosting high-gain antennas greatly extend existing WiFi coverage, offering a fast and smooth online experience further away. Connect and Enjoy via the Latest Bluetooth 5.0 The latest Bluetooth 5.0 Technology, achieves speeds 2× faster and 4× broader coverage than Bluetooth 4.2, to perfectly coordinate with your game controllers, headphones, keyboards, and other Bluetooth devices.*** Cutting-Edge Security WPA3, the latest network security standard that provides safer and individualized password encryption, protects your network from wireless hacking and ensure your wireless connection is completely secure while surfing the web and shopping online.** More Devices, Less Congestion OFDMA creates separate channel segments for devices to communicate while MU-MIMO allows multiple clients to simultaneously receive data. Combining these technologies guarantees your PC gets strong, efficient, and lag-free wireless connectivity at the same time all of your other devices are communicating.‡ 802.11ac | without OFDMA 802.11ax | OFDMA Ingenious Details Make a Perfect Whole A customized heat sink improves connection stability by efficiently dissipating thermal energy. Additionally, gold plating on every contractor prevents oxidation. This attention to detail ensures your adapter is crafted for ultimate performance. Equip Your Ideal Wi-Fi 6 Router Archer AX11000 AX11000 Next-Gen Tri-Band Gaming Router Archer AX6000 AX6000 Next-Gen Wi-Fi 6 Router Archer AX50 AX3000 Gigabit Wi-Fi 6 Router Easy Setup The utility on the provided CD makes software installation remarkably simple Operating System Operating System Supports Windows 10 (64-bit) only Standard and Low-Profile Brackets Both a standard and low-profile bracket, for mini tower computer cases, are provided †Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage, and number of connected devices are not guaranteed and will vary as a result of network conditions, AP limitations, and environmental factors, including building materials, obstacles, volume and density of traffic, and AP location. ‡Use of Wi-Fi 6 (802.11ax), and features including OFDMA, MU-MIMO, HE160, and 1024-QAM require APs to also support the corresponding features. §802.11ax 2x2 160 MHz enables 2402 Mbps maximum theoretical data rates, 3× faster than standard 802.11ac 2x2 80 MHz (867 Mbps) and nearly 6x faster than baseline 1x1ac (433 Mbps) Wi-Fi as documented in IEEE 802.11 wireless standard specifications, and require the use of similarly configured 802.11ax wireless network routers. *“Up to 75% lower latency” is based on Intel simulation data of 802.11ax with and without OFDMA using 9 clients. Average latency without OFDM is 36ms, with OFDMA average latency is reduced to 7.6ms. Latency improvement requires that the AP and all clients support OFDMA. **Use of WPA3TM requires APs to also support the corresponding feature. ***Several new features are introduced in the Bluetooth Core Specification 5.0 Release, including 2× faster speed and 4× broader coverage compared with Bluetooth 4.2.

Essentials Product Collection 9th Generation Intel® Core™ i7 Processors Code Name Products formerly Coffee Lake Vertical Segment Desktop Processor Number i7-9700KF Status Launched Launch Date Q1'19 Lithography 14 nm Included Items Please note: The boxed product does not include a fan or heat sink Use Conditions PC/Client/Tablet Recommended Customer Price $349.00 - $360.00 CPU Specifications # of Cores 8 # of Threads 8 Processor Base Frequency 3.60 GHz Max Turbo Frequency 4.90 GHz Cache 12 MB Intel® Smart Cache Bus Speed 8 GT/s Intel® Turbo Boost Technology 2.0 Frequency ‡ 4.90 GHz TDP 95 W Supplemental Information Embedded Options Available No Datasheet View now Memory Specifications Max Memory Size (dependent on memory type) 128 GB Memory Types DDR4-2666 Max # of Memory Channels 2 Max Memory Bandwidth 41.6 GB/s ECC Memory Supported  ‡ No Expansion Options Scalability 1S Only PCI Express Revision 3.0 PCI Express Configurations  ‡ Up to 1x16, 2x8, 1x8+2x4 Max # of PCI Express Lanes 16 Package Specifications Sockets Supported FCLGA1151 Max CPU Configuration 1 Thermal Solution Specification PCG 2015D (130W) T JUNCTION 100°C Package Size 37.5mm x 37.5mm Advanced Technologies Intel® Optane™ Memory Supported  ‡ Yes Intel® Turbo Boost Technology  ‡ 2.0 Intel vPro® Platform Eligibility  ‡ No Intel® Hyper-Threading Technology  ‡ No Intel® Virtualization Technology (VT-x)  ‡ Yes Intel® Virtualization Technology for Directed I/O (VT-d)  ‡ Yes Intel® VT-x with Extended Page Tables (EPT)  ‡ Yes Intel® Transactional Synchronization Extensions Yes Intel® 64  ‡ Yes Instruction Set 64-bit Instruction Set Extensions Intel® SSE4.1, Intel® SSE4.2, Intel® AVX2 Idle States Yes Enhanced Intel SpeedStep® Technology Yes Thermal Monitoring Technologies Yes Intel® Identity Protection Technology  ‡ Yes Intel® Stable Image Platform Program (SIPP) No Security & Reliability Intel® AES New Instructions Yes Secure Key Yes Intel® Software Guard Extensions (Intel® SGX) Yes with Intel® ME Intel® Memory Protection Extensions (Intel® MPX) Yes Intel® OS Guard Yes Intel® Trusted Execution Technology  ‡ No Execute Disable Bit  ‡ Yes Intel® Boot Guard Yes Looking for any other Brand CPUs  Click Here. Explore awesome GPUs, RAMs, SSDs, and much more  Click Here.

Condition Used / Seller Refurbished pulled from branded PCs Cooler One Socket-1156 Cooler supports Intel Core i7, Core i3 and Core i5 LGA-1150/1151/1155/1156 processors with up to 95W TDP (Thermal Design Power). Aluminum heat sink with Copper Core 3.5-inch fan Supports Intel Core i7, Core i3 and Core i5 Socket 1155/1156 processors with up to 95W TDP (Thermal Design Power) Supports Intel CPU socket type: LGA 1150 / 1151 / 1155 / 1156

Condition Used / Seller Refurbished pulled from branded PCs Cooler One Socket-1156 Copper Core Cooler supports Intel Core i7, Core i3 and Core i5 LGA-1150/1151/1155/1156 processors with up to 95W TDP (Thermal Design Power). Aluminum heat sink with Copper Core 3.5-inch fan Supports Intel Core i7, Core i3 and Core i5 Socket 1155/1156 processors with up to 95W TDP (Thermal Design Power) Supports Intel CPU socket type: LGA 1150 / 1151 / 1155 / 1156

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128V Audio DSP Mixer with express shipping all over Pakistan.   The CONVERGE Pro 2 128V Audio DSP Mixer from ClearOne is a complete conferencing solution with 12 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in VoIP interface for 2 lines. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer comes with built-in VoIP for VoIP conferencing. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.   Features: Architecture • 12 mic/line inputs with AEC •  Built-in VoIP for 2 lines •  Built-in USB for PC-based conferencing Scalable Connectivity •  Standalone and daisy-chained system •  Stack up units up to 96 mic/line inputs •  Expansion bus C-Link with 64 channels •  P-Link bus to connect 6 peripherals Configuration & Management •  CONSOLE software •  Auto-discovery of devices •  Matrix View for entire system •  FlowView for visualized audio signal paths •  System monitoring and troubleshooting Audio Signal Processing •  Acoustic Echo Cancellation processing •  Distributed Echo Cancellation on every mic input •  Noise cancellation with Adaptive-Ambience •  Acoustic Intelligence with faster convergence •  DARE feedback elimination •  Microphone gating Flexible Control Options •  Dialer app for Windows, Mac, iOS, and Android •  Tabletop controller with a touch panel •  Wall controller with buttons •  Web-based controller Supports 3rd-party control modules   Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) VoIP Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation Audio: 5 lines (2 default + 3 lines through license), each line supporting 1+5 calls Sample Rate: 24 kHz Sample Bit Depth: 24-bit Codec: G.711 uLaw, G.711 ALaw, G.722 Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: Proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 48T Audio DSP Mixer with express shipping all over Pakistan.     The CONVERGE Pro 2 48T Audio DSP Mixer from ClearOne is a complete conferencing solution with 4 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection.   The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.     Features: Architecture • 4 mic/line inputs with AEC •  Built-in Telco with ClearEffect processing •  Built-in USB for PC-based conferencing Scalable Connectivity •  Standalone and daisy-chained system •  Stack up units up to 96 mic/line inputs •  Expansion bus C-Link with 64 channels •  P-Link bus to connect 6 peripherals Configuration & Management •  CONSOLE software •  Auto-discovery of devices •  Matrix View for entire system •  FlowView for visualized audio signal paths •  System monitoring and troubleshooting Audio Signal Processing •  Acoustic Echo Cancellation processing •  Distributed Echo Cancellation on every mic input •  Noise cancellation with Adaptive-Ambience •  Acoustic Intelligence with faster convergence •  DARE feedback elimination •  Microphone gating Flexible Control Options •  Dialer app for Windows, Mac, iOS, and Android •  Tabletop controller with a touch panel •  Wall controller with buttons •  Web-based controller •  Supports 3rd-party control modules     Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Amplifier Output Speaker Output Port: Dual binding posts Audio: 2 x Channel Output Power: Maximum 10 W, 8 Ohms load Frequency Response: 20 Hz to 22 kHz @ +10 dBu, +/- 0.5 dBu THD + N: 20 Hz to 22 kHz @ +10 dBu, 1 W, Dynamic Range: 20 Hz to 22 kHz @ 20 dB, >102dB, with 20 kHz digital low pass filter Crosstalk: Channel to Channel, stimulus at 20 dBu, 10 W output to receptor 8⿦ load, 20 Hz to 22 kHz, Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)

Description: Details iShopping.pk brings you the best price for ClearOne Converge Pro 2 128T Audio DSP Mixer with express shipping all over Pakistan.   The CONVERGE Pro 2 128T Audio DSP Mixer from ClearOne is a complete conferencing solution with 12 mic/line inputs (AEC), 8 mic/line outputs, built-in USB audio, and built-in Telco interface for teleconferencing. It is optimized to work with Beamforming Mic Array 2 and DIALOG 20 2-Channel Wireless Microphone System through its native connection. The mixer is suitable for use in venues such as boardrooms, conference rooms, huddle rooms, training rooms, lecture halls, courtrooms, auditoriums, and telemedicine facilities.   Features: Architecture 12 mic/line inputs with AEC Built-in Telco with ClearEffect processing Built-in USB for PC-based conferencing Scalable Connectivity Standalone and daisy-chained system Stack up units up to 96 mic/line inputs Expansion bus C-Link with 64 channels P-Link bus to connect 6 peripherals Configuration & Management CONSOLE software Auto-discovery of devices Matrix View for entire system FlowView for visualized audio signal paths System monitoring and troubleshooting Audio Signal Processing Acoustic Echo Cancellation processing Distributed Echo Cancellation on every mic input Noise cancellation with Adaptive-Ambience Acoustic Intelligence with faster convergence DARE feedback elimination Microphone gating Flexible Control Options Dialer app for Windows, Mac, iOS, and Android Tabletop controller with a touch panel Wall controller with buttons Web-based controller Supports 3rd-party control modules   Specifications: Mic/Line Inputs Balanced audio inputs, 3.81 mm orange color Phoenix/Euroblock type male header Push-on mini-terminal block Outputs Balanced audio inputs, 3.81 mm black color Phoenix/Euroblock type male header Push-on mini-terminal block Frequency Response 20 Hz to 22 kHz @ +4 dBu, +/- 0.5 dBu EIN 20 kHz BW, max gain, Rs: 150 Ohms, -126 dBu THD + N 20 Hz to 22 kHz @ +4 dBu, line level, 0.006% 20 Hz to 22 kHz @ -56 dBu, mic level, Dynamic Range 20 Hz to 20 kHz @ 0 dB, >105 dB Crosstalk Channel to Channel Stimulus at 20 dBu to receptor at -56 dBu, 1 kHz, Input Impedance Balanced (line to ground), 2.2 kOhms, 1% Nominal Input Level Adjustable -56 dB to 0 dB, 7 dB step coarse gain Maximum Input Level -65 dBu to 20 dBu Phantom Power 48 V, Impedance: 6.81 kOhms Output Impedance Balanced (Line to Ground): 95 Ohms, 1% Output Level 0 dBu (Nominal), 20 dBu (Max), -40 dBu (Selectable) USB Audio Port Type: USB-B connector Audio: Digital audio, 2 x 2 bidirectional channels Sample Rate: 48 kHz Sample Bit Depth: 24-bit Compatible: USB 2.0, USB 3.0 Telephone Interface Port Type: RJ11   Frequency Response: Mic/Line Input to Telephone Out: 250 Hz to 3.4 kHz, +/- 2 dB, 4 dBu Telephone In to Mic/Line Out: 250 Hz to 3.4 kHz, +/- 2 dB, -15 dBu   THD + N: Mic/Line Input to Telephone Out: Telephone In to Mic/Line Out:   Dynamic Range: Mic/Line Input to Telephone Out: >67 dBu Telephone In to Mic/Line Out: >87 dBu   REN: Ringer Equivalent Number 0.2   Transhybrid Balance: 30 dB (1 kHz, all AC terminations) Ethernet Port Type: RJ-45, 10/100 Mbps Ethernet network, auto negotiation IP Address: IPv4 (IPv6 upgradeable) Bus C-LINK Expansion Bus Ports Type: RJ-45 (CAT5e or CAT6) C-Link In & Out: Proprietary expansion bus Audio: 64 expansion channels Cable: Solid core, factory-terminated CAT5e or 6 cable Distance: Up to 150' (45 m) Ports Type: RJ-45 (CAT5e or CAT6) P-Link In & Out: Proprietary peripheral bus PoE In: P-Link in port, PoE IEEE802.3AF Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units Cable: Solid core, factory-terminated CAT 5e or 6 cable Distance: Up to 200' (60 m) RS232 Port Type: DB9 female Settings: 9600/19200/38400/57600/115200 baud Serial echo Flow control Support: Serial commands GPIO Port Type: 5.08 mm Green color Phoenix/Euroblock type male header Support: Control, status, variable voltage control Power Pin: 5 VDC @ 350 mA power source Pin 1 to 4 Open Collector Outputs: 40 VDC @ 250 mA Active Outputs (Source/Sink): 5 VDC @ 25 mA Logic Inputs: 40.2 kOhms pull up Variable Voltage Control Inputs: 5 VDC maximum Ground Pin: GND USB Port Type: USB-B connector Location: Front panel Compatible: USB 2.0, USB 3.0 LEDs Location: Front panel Status LED (Off): Unit still initializing Status LED (Blue, Fast Blinking): Stack syncing in progress Status LED (Blue, Slow Blinking): Unit not configured Status LED (Blue, Solid): Configured unit Status LED (Red, Fast Blinking): Stack sync error Locate LED (Blue, Blinking): "Unit locate" command received Power LED (Blue, Solid): Unit is powered on Touch Sensor Type: Capacitive touch button Location: Front panel Power Port Type: AC inlet Mains Voltage: 100 to 240 VAC, 50/60 Hz Power Consumption: 50 W typical Thermal: 170 BTU/hour typical Operating Temperature: 14 to 104°F (-10 to 40°C) ambient temperature Dimensions Without Rack-Ears: 17 x 10.73 x 1.72" (43.2 x 27.3 x 4.4 cm) With Rack-Ears: 19 x 10.73 x 1.72" (48.3 x 27.3 x 4.4 cm) Weight 9.3 lb (4.2 kg)