Occupational health safety regulationsemphasizes

OTHM Level 6 Diploma in Occupational Health & Safety in Islamabad, Rawalpindi, Karachi, Peshawar, Lahore and Pakistan O3165643400, O3119903317 The objective of the OTHM Level 6 Diploma in Health and Social Care Management qualification is to equip learners with the underpinning knowledge, understanding and skills required for a career in the health and social care sector at a managerial level. The programme enables learners to demonstrate their skills by producing evidence from their work activities, to meet national occupational standards. Learners will acquire care management skills in the Health and Social Care sector. OTHM qualifications at RQF Level 6 represent practical knowledge, skills, capabilities and competences that are assessed in academic terms as being equivalent to Bachelor’s Degrees with Honours, Bachelor’s Degrees, Professional Graduate Certificate in Education (PGCE), Graduate Diplomas and Graduate Certificates. The Diploma in Occupational Health and Safety Management – Level 6 (Accredited by Eduqual, UK) is a qualification for aspiring health and safety professionals. It is aimed at learners who are responsible for developing and applying health and safety procedures day-to-day in an organisation. They are likely to be managers looking to improve their knowledge and skills. Qualifications Our qualifications are made up of the Regulated Qualification Framework (RQF) rules which provides flexible ways to get a qualification. Qualifications at the same level are a similar level of difficulty, but the size and content of the qualifications can vary. The Level 4, 5 and 6 diploma qualifications are equivalent to Year 1, 2 and 3 (Final year) respectively of a three-year UK Bachelor’s degree. Each level consists of 120 credits. Completing any of the level 4, 5 and 6 qualifications will enable learners a progression to the next level of higher education at UK universities. The Level 6 qualifications in Clinical Aesthetic Injectable Therapies are designed to enable learners / practitioners to provide the highest standards of patient and client care during all stages of delivering cosmetic / aesthetic injectable therapies. By achieving these qualifications, learners will acquire the knowledge, skills and competence to administer treatments safely and appropriately, adhering to the principles of ‘do no harm’ and promoting public health at all times. Registered healthcare professionals e.g. doctors, dentists, nurse prescribers, allied health professionals, independent pharmacist prescribers. In addition to formal identification documentation and previous qualification certificates, learners must produce evidence of registration with an appropriate professional body* e.g. GMC, GDC, NMC.HCPC Registered healthcare professionals from any group who do not hold prescribing rights must provide evidence of working under the clinical oversight of a professional who has regulated prescribing rights. *Learners may not be registered for either qualification if they have any conditions noted on their professional body (PRSB) registration. OTHM require centres to check applicants’ status with regards to PRSB registration prior to registration on the qualification and evidence of this retained for scrutiny by OTHM. Nurses and Allied-healthcare professionals (and those registered with the Health and Care Professions Council) who are not independent prescribers are subject to CPSA / JCCP requirements for working under the clinical oversight of an appropriate professional i.e. they must have access to, and support from, experienced clinicians who are able to deal with medical emergency situations and complications and, have independent prescribing rights. Applicants registered with non UK regulatory bodies Applicants who provide evidence of registration on non UK regulatory bodies e.g. The Medical Board of Australia; will have their registration confirmed and vetted on that register and their eligibility to practice in the UK must be confirmed through the appropriate professional register. If there is no evidence of registration, or conditions are noted on that registration, the applicant will not be eligible to register for the qualification. Non UK regulatory bodies must be nationally recognised to be considered a suitable register. Each application will be evaluated on a case by case or individual basis. English requirements: If a learner is not from a majority English-speaking country, they must provide evidence of English language competency. For more information visit English Language Expectations page in the OTHM website. Equivalences OTHM qualifications at RQF Level 7 represent practical knowledge, skills, capabilities and competences that are assessed in academic terms as being equivalent in level to Master’s Degrees, Integrated Master’s Degrees, Postgraduate Diplomas, Postgraduate Certificate in Education (PGCE) and Postgraduate Certificates. Overview Accounting and finance are at the very heart of business operations. From banking to manufacturing, from huge service industries to micro businesses, the ability to manage, plan and account for money is still the ultimate measure of business success and the key driver of growth. Many accountants occupy key managerial positions in business, yet few are qualified managers. In the increasingly complex modern business environment, there is a high demand for skilled professionals who can work flexibly in teams across business boundaries. The objective of the OTHM Level 6 Diploma in Accounting and Business qualification is to provide learners with the knowledge and skills required by a middle or senior manager in an organisation, and who may be involved in managing organisational finances, investment and risk, audit and assurance, or research. Entry requirements For entry onto the OTHM Level 6 Diploma in Accounting and Business qualification, learners must possess: Relevant NQF/QCF/RQF Level 5 diploma or equivalent recognised qualification Mature learners (over 21) with management experience (learners must check with the delivery centre regarding this experience prior to registering for the programme) Learner must be 18 years or older at the beginning of the course English requirements: If a learner is not from a majority English-speaking country must provide evidence of English language competency. For more information visit English Language Expectations page in this website Equivalences OTHM qualifications at RQF Level 6 represent practical knowledge, skills, capabilities and competences that are assessed in academic terms as being equivalent to Bachelor’s Degrees with Honors, Bachelor’s Degrees, Professional Graduate Certificate in Education (PGCE), Graduate Diplomas and Graduate Certificates. The level 6 Diploma in Occupational Health and Safety is a qualification for aspiring health and safety professionals. It is aimed at learners who are responsible for developing and applying health and safety procedures day-to-day in an organization. They are likely to be managers looking to improve their knowledge and skills. The Diploma is designed to provide learners with the expertise required to undertake a career as a health and safety practitioner and it also provides a sound basis for progression to postgraduate study. OTHM Level 6 Diploma in Occupational Health & safety in Islamabad, OTHM Level 6 Diploma in Occupational Health & safety in Rawalpindi, OTHM Level 6 Diploma in Occupational Health & safety in Gujranwala, OTHM Level 6 Diploma in Occupational Health & safety in Sialkot, OTHM Level 6 Diploma in Occupational Health & safety in Sargodha, OTHM Level 6 Diploma in Occupational Health & safety in Gujrat, OTHM Level 6 Diploma in Occupational Health & safety in Lahore, OTHM Level 6 Diploma in Occupational Health & safety in Faisalabad, OTHM Level 6 Diploma in Occupational Health & safety in Multan, OTHM Level 6 Diploma in Occupational Health & safety in Mandi Bahauddin, OTHM Level 6 Diploma in Occupational Health & safety in Bahawalpur, OTHM Level 6 Diploma in Occupational Health & safety in Attock, OTHM Level 6 Diploma in Occupational Health & safety in Chakwal, OTHM Level 6 Diploma in Occupational Health & safety in Mirpur, OTHM Level 6 Diploma in Occupational Health & safety in Bagh, OTHM Level 6 Diploma in Occupational Health & safety in Rawala kot, OTHM Level 6 Diploma in Occupational Health & safety in Kotli, OTHM Level 6 Diploma in Occupational Health & safety in Karachi, OTHM Level 6 Diploma in Occupational Health & safety in Hyderabad, OTHM Level 6 Diploma in Occupational Health & safety in Mardan, OTHM Level 6 Diploma in Occupational Health & safety in Peshawar, OTHM Level 6 Diploma in Occupational Health & safety in Swat, OTHM Level 6 Diploma in Occupational Health & safety in Rawat, OTHM Level 6 Diploma in Occupational Health & safety in Sawabi, OTHM Level 6 Diploma in Occupational Health & safety in Sahiwal, OTHM Level 6 Diploma in Occupational Health & safety in Sakkar, OTHM Level 6 Diploma in Occupational Health & safety in Haripur, OTHM Level 6 Diploma in Occupational Health & safety in Pakistan O3165643400, O3119903317,

OTHM Level 6 Diploma in Occupational Health & safety in Islamabad, OTHM Level 6 Diploma in Occupational Health & safety in Rawalpindi, OTHM Level 6 Diploma in Occupational Health & safety in Gujranwala, OTHM Level 6 Diploma in Occupational Health & safety in Sialkot, OTHM Level 6 Diploma in Occupational Health & safety in Sargodha, OTHM Level 6 Diploma in Occupational Health & safety in Gujrat, OTHM Level 6 Diploma in Occupational Health & safety in Lahore, OTHM Level 6 Diploma in Occupational Health & safety in Faisalabad, OTHM Level 6 Diploma in Occupational Health & safety in Multan, OTHM Level 6 Diploma in Occupational Health & safety in Mandi Bahauddin, OTHM Level 6 Diploma in Occupational Health & safety in Bahawalpur, OTHM Level 6 Diploma in Occupational Health & safety in Attock, OTHM Level 6 Diploma in Occupational Health & safety in Chakwal, OTHM Level 6 Diploma in Occupational Health & safety in Mirpur, OTHM Level 6 Diploma in Occupational Health & safety in Bagh, OTHM Level 6 Diploma in Occupational Health & safety in Rawala kot, OTHM Level 6 Diploma in Occupational Health & safety in Kotli, OTHM Level 6 Diploma in Occupational Health & safety in Karachi, OTHM Level 6 Diploma in Occupational Health & safety in Hyderabad, OTHM Level 6 Diploma in Occupational Health & safety in Mardan, OTHM Level 6 Diploma in Occupational Health & safety in Peshawar, OTHM Level 6 Diploma in Occupational Health & safety in Swat, OTHM Level 6 Diploma in Occupational Health & safety in Rawat, OTHM Level 6 Diploma in Occupational Health & safety in Sawabi, OTHM Level 6 Diploma in Occupational Health & safety in Sahiwal, OTHM Level 6 Diploma in Occupational Health & safety in Sakkar, OTHM Level 6 Diploma in Occupational Health & safety in Haripur, OTHM Level 6 Diploma in Occupational Health & safety in Pakistan O3165643400, O3119903317,OTHM Level 6 Diploma in Occupational Health & Safety in Islamabad, Rawalpindi, Karachi, Peshawar, Lahore and Pakistan O3165643400, O3119903317 The objective of the OTHM Level 6 Diploma in Health and Social Care Management qualification is to equip learners with the underpinning knowledge, understanding and skills required for a career in the health and social care sector at a managerial level. The programme enables learners to demonstrate their skills by producing evidence from their work activities, to meet national occupational standards. Learners will acquire care management skills in the Health and Social Care sector. OTHM qualifications at RQF Level 6 represent practical knowledge, skills, capabilities and competences that are assessed in academic terms as being equivalent to Bachelor’s Degrees with Honours, Bachelor’s Degrees, Professional Graduate Certificate in Education (PGCE), Graduate Diplomas and Graduate Certificates. The Diploma in Occupational Health and Safety Management – Level 6 (Accredited by Eduqual, UK) is a qualification for aspiring health and safety professionals. It is aimed at learners who are responsible for developing and applying health and safety procedures day-to-day in an organisation. They are likely to be managers looking to improve their knowledge and skills. Qualifications Our qualifications are made up of the Regulated Qualification Framework (RQF) rules which provides flexible ways to get a qualification. Qualifications at the same level are a similar level of difficulty, but the size and content of the qualifications can vary. The Level 4, 5 and 6 diploma qualifications are equivalent to Year 1, 2 and 3 (Final year) respectively of a three-year UK Bachelor’s degree. Each level consists of 120 credits. Completing any of the level 4, 5 and 6 qualifications will enable learners a progression to the next level of higher education at UK universities. The Level 6 qualifications in Clinical Aesthetic Injectable Therapies are designed to enable learners / practitioners to provide the highest standards of patient and client care during all stages of delivering cosmetic / aesthetic injectable therapies. By achieving these qualifications, learners will acquire the knowledge, skills and competence to administer treatments safely and appropriately, adhering to the principles of ‘do no harm’ and promoting public health at all times. Registered healthcare professionals e.g. doctors, dentists, nurse prescribers, allied health professionals, independent pharmacist prescribers. In addition to formal identification documentation and previous qualification certificates, learners must produce evidence of registration with an appropriate professional body* e.g. GMC, GDC, NMC.HCPC Registered healthcare professionals from any group who do not hold prescribing rights must provide evidence of working under the clinical oversight of a professional who has regulated prescribing rights. *Learners may not be registered for either qualification if they have any conditions noted on their professional body (PRSB) registration. OTHM require centres to check applicants’ status with regards to PRSB registration prior to registration on the qualification and evidence of this retained for scrutiny by OTHM. Nurses and Allied-healthcare professionals (and those registered with the Health and Care Professions Council) who are not independent prescribers are subject to CPSA / JCCP requirements for working under the clinical oversight of an appropriate professional i.e. they must have access to, and support from, experienced clinicians who are able to deal with medical emergency situations and complications and, have independent prescribing rights. Applicants registered with non UK regulatory bodies Applicants who provide evidence of registration on non UK regulatory bodies e.g. The Medical Board of Australia; will have their registration confirmed and vetted on that register and their eligibility to practice in the UK must be confirmed through the appropriate professional register. If there is no evidence of registration, or conditions are noted on that registration, the applicant will not be eligible to register for the qualification. Non UK regulatory bodies must be nationally recognised to be considered a suitable register. Each application will be evaluated on a case by case or individual basis. English requirements: If a learner is not from a majority English-speaking country, they must provide evidence of English language competency. For more information visit English Language Expectations page in the OTHM website. Equivalences OTHM qualifications at RQF Level 7 represent practical knowledge, skills, capabilities and competences that are assessed in academic terms as being equivalent in level to Master’s Degrees, Integrated Master’s Degrees, Postgraduate Diplomas, Postgraduate Certificate in Education (PGCE) and Postgraduate Certificates. Overview Accounting and finance are at the very heart of business operations. From banking to manufacturing, from huge service industries to micro businesses, the ability to manage, plan and account for money is still the ultimate measure of business success and the key driver of growth. Many accountants occupy key managerial positions in business, yet few are qualified managers. In the increasingly complex modern business environment, there is a high demand for skilled professionals who can work flexibly in teams across business boundaries. The objective of the OTHM Level 6 Diploma in Accounting and Business qualification is to provide learners with the knowledge and skills required by a middle or senior manager in an organisation, and who may be involved in managing organisational finances, investment and risk, audit and assurance, or research. Entry requirements For entry onto the OTHM Level 6 Diploma in Accounting and Business qualification, learners must possess: Relevant NQF/QCF/RQF Level 5 diploma or equivalent recognised qualification Mature learners (over 21) with management experience (learners must check with the delivery centre regarding this experience prior to registering for the programme) Learner must be 18 years or older at the beginning of the course English requirements: If a learner is not from a majority English-speaking country must provide evidence of English language competency. For more information visit English Language Expectations page in this website Equivalences OTHM qualifications at RQF Level 6 represent practical knowledge, skills, capabilities and competences that are assessed in academic terms as being equivalent to Bachelor’s Degrees with Honors, Bachelor’s Degrees, Professional Graduate Certificate in Education (PGCE), Graduate Diplomas and Graduate Certificates. The level 6 Diploma in Occupational Health and Safety is a qualification for aspiring health and safety professionals. It is aimed at learners who are responsible for developing and applying health and safety procedures day-to-day in an organization. They are likely to be managers looking to improve their knowledge and skills. The Diploma is designed to provide learners with the expertise required to undertake a career as a health and safety practitioner and it also provides a sound basis for progression to postgraduate study.

OTHM Level 6 Diploma in Occupational Health & safety in Islamabad, OTHM Level 6 Diploma in Occupational Health & safety in Rawalpindi, OTHM Level 6 Diploma in Occupational Health & safety in Gujranwala, OTHM Level 6 Diploma in Occupational Health & safety in Sialkot, OTHM Level 6 Diploma in Occupational Health & safety in Sargodha, OTHM Level 6 Diploma in Occupational Health & safety in Gujrat, OTHM Level 6 Diploma in Occupational Health & safety in Lahore, OTHM Level 6 Diploma in Occupational Health & safety in Faisalabad, OTHM Level 6 Diploma in Occupational Health & safety in Multan, OTHM Level 6 Diploma in Occupational Health & safety in Mandi Bahauddin, OTHM Level 6 Diploma in Occupational Health & safety in Bahawalpur, OTHM Level 6 Diploma in Occupational Health & safety in Attock, OTHM Level 6 Diploma in Occupational Health & safety in Chakwal, OTHM Level 6 Diploma in Occupational Health & safety in Mirpur, OTHM Level 6 Diploma in Occupational Health & safety in Bagh, OTHM Level 6 Diploma in Occupational Health & safety in Rawala kot, OTHM Level 6 Diploma in Occupational Health & safety in Kotli, OTHM Level 6 Diploma in Occupational Health & safety in Karachi, OTHM Level 6 Diploma in Occupational Health & safety in Hyderabad, OTHM Level 6 Diploma in Occupational Health & safety in Mardan, OTHM Level 6 Diploma in Occupational Health & safety in Peshawar, OTHM Level 6 Diploma in Occupational Health & safety in Swat, OTHM Level 6 Diploma in Occupational Health & safety in Rawat, OTHM Level 6 Diploma in Occupational Health & safety in Sawabi, OTHM Level 6 Diploma in Occupational Health & safety in Sahiwal, OTHM Level 6 Diploma in Occupational Health & safety in Sakkar, OTHM Level 6 Diploma in Occupational Health & safety in Haripur, OTHM Level 6 Diploma in Occupational Health & safety in Pakistan O3165643400, O3119903317,OTHM Level 6 Diploma in Occupational Health & Safety in Islamabad, Rawalpindi, Karachi, Peshawar, Lahore and Pakistan O3165643400, O3119903317OTHM qualifications at RQF Level 6 represent practical knowledge, skills, capabilities and competences that are assessed in academic terms as being equivalent to Bachelor’s Degrees with Honours, Bachelor’s Degrees, Professional Graduate Certificate in Education (PGCE), Graduate Diplomas and Graduate Certificates. The Diploma in Occupational Health and Safety Management – Level 6 (Accredited by Eduqual, UK) is a qualification for aspiring health and safety professionals. It is aimed at learners who are responsible for developing and applying health and safety procedures day-to-day in an organisation. They are likely to be managers looking to improve their knowledge and skills. Qualifications Our qualifications are made up of the Regulated Qualification Framework (RQF) rules which provides flexible ways to get a qualification. Qualifications at the same level are a similar level of difficulty, but the size and content of the qualifications can vary. The Level 4, 5 and 6 diploma qualifications are equivalent to Year 1, 2 and 3 (Final year) respectively of a three-year UK Bachelor’s degree. Each level consists of 120 credits. Completing any of the level 4, 5 and 6 qualifications will enable learners a progression to the next level of higher education at UK universities. The Level 6 qualifications in Clinical Aesthetic Injectable Therapies are designed to enable learners / practitioners to provide the highest standards of patient and client care during all stages of delivering cosmetic / aesthetic injectable therapies. By achieving these qualifications, learners will acquire the knowledge, skills and competence to administer treatments safely and appropriately, adhering to the principles of ‘do no harm’ and promoting public health at all times. Registered healthcare professionals e.g. doctors, dentists, nurse prescribers, allied health professionals, independent pharmacist prescribers. In addition to formal identification documentation and previous qualification certificates, learners must produce evidence of registration with an appropriate professional body* e.g. GMC, GDC, NMC.HCPC Registered healthcare professionals from any group who do not hold prescribing rights must provide evidence of working under the clinical oversight of a professional who has regulated prescribing rights. *Learners may not be registered for either qualification if they have any conditions noted on their professional body (PRSB) registration. OTHM require centres to check applicants’ status with regards to PRSB registration prior to registration on the qualification and evidence of this retained for scrutiny by OTHM. Nurses and Allied-healthcare professionals (and those registered with the Health and Care Professions Council) who are not independent prescribers are subject to CPSA / JCCP requirements for working under the clinical oversight of an appropriate professional i.e. they must have access to, and support from, experienced clinicians who are able to deal with medical emergency situations and complications and, have independent prescribing rights. Applicants registered with non UK regulatory bodies Applicants who provide evidence of registration on non UK regulatory bodies e.g. The Medical Board of Australia; will have their registration confirmed and vetted on that register and their eligibility to practice in the UK must be confirmed through the appropriate professional register. If there is no evidence of registration, or conditions are noted on that registration, the applicant will not be eligible to register for the qualification. Non UK regulatory bodies must be nationally recognised to be considered a suitable register. Each application will be evaluated on a case by case or individual basis. English requirements: If a learner is not from a majority English-speaking country, they must provide evidence of English language competency. For more information visit English Language Expectations page in the OTHM website. Equivalences OTHM qualifications at RQF Level 7 represent practical knowledge, skills, capabilities and competences that are assessed in academic terms as being equivalent in level to Master’s Degrees, Integrated Master’s Degrees, Postgraduate Diplomas, Postgraduate Certificate in Education (PGCE) and Postgraduate Certificates. Overview Accounting and finance are at the very heart of business operations. From banking to manufacturing, from huge service industries to micro businesses, the ability to manage, plan and account for money is still the ultimate measure of business success and the key driver of growth. Many accountants occupy key managerial positions in business, yet few are qualified managers. In the increasingly complex modern business environment, there is a high demand for skilled professionals who can work flexibly in teams across business boundaries. The objective of the OTHM Level 6 Diploma in Accounting and Business qualification is to provide learners with the knowledge and skills required by a middle or senior manager in an organisation, and who may be involved in managing organisational finances, investment and risk, audit and assurance, or research. Entry requirements For entry onto the OTHM Level 6 Diploma in Accounting and Business qualification, learners must possess: Relevant NQF/QCF/RQF Level 5 diploma or equivalent recognised qualification Mature learners (over 21) with management experience (learners must check with the delivery centre regarding this experience prior to registering for the programme) Learner must be 18 years or older at the beginning of the course English requirements: If a learner is not from a majority English-speaking country must provide evidence of English language competency. For more information visit English Language Expectations page in this website Equivalences OTHM qualifications at RQF Level 6 represent practical knowledge, skills, capabilities and competences that are assessed in academic terms as being equivalent to Bachelor’s Degrees with Honors, Bachelor’s Degrees, Professional Graduate Certificate in Education (PGCE), Graduate Diplomas and Graduate Certificates. The level 6 Diploma in Occupational Health and Safety is a qualification for aspiring health and safety professionals. It is aimed at learners who are responsible for developing and applying health and safety procedures day-to-day in an organization. They are likely to be managers looking to improve their knowledge and skills. The Diploma is designed to provide learners with the expertise required to undertake a career as a health and safety practitioner and it also provides a sound basis for progression to postgraduate study.

OTHM Level 6 Diploma in Occupational Health & Safety in Islamabad, Rawalpindi, Karachi, Peshawar, Lahore and Pakistan O3165643400, O3119903317Qualifications Our qualifications are made up of the Regulated Qualification Framework (RQF) rules which provides flexible ways to get a qualification. Qualifications at the same level are a similar level of difficulty, but the size and content of the qualifications can vary. The Level 4, 5 and 6 diploma qualifications are equivalent to Year 1, 2 and 3 (Final year) respectively of a three-year UK Bachelor’s degree. Each level consists of 120 credits. Completing any of the level 4, 5 and 6 qualifications will enable learners a progression to the next level of higher education at UK universities. The Level 6 qualifications in Clinical Aesthetic Injectable Therapies are designed to enable learners / practitioners to provide the highest standards of patient and client care during all stages of delivering cosmetic / aesthetic injectable therapies. By achieving these qualifications, learners will acquire the knowledge, skills and competence to administer treatments safely and appropriately, adhering to the principles of ‘do no harm’ and promoting public health at all times. Registered healthcare professionals e.g. doctors, dentists, nurse prescribers, allied health professionals, independent pharmacist prescribers. In addition to formal identification documentation and previous qualification certificates, learners must produce evidence of registration with an appropriate professional body* e.g. GMC, GDC, NMC.HCPC Registered healthcare professionals from any group who do not hold prescribing rights must provide evidence of working under the clinical oversight of a professional who has regulated prescribing rights. *Learners may not be registered for either qualification if they have any conditions noted on their professional body (PRSB) registration. OTHM require centres to check applicants’ status with regards to PRSB registration prior to registration on the qualification and evidence of this retained for scrutiny by OTHM. Nurses and Allied-healthcare professionals (and those registered with the Health and Care Professions Council) who are not independent prescribers are subject to CPSA / JCCP requirements for working under the clinical oversight of an appropriate professional i.e. they must have access to, and support from, experienced clinicians who are able to deal with medical emergency situations and complications and, have independent prescribing rights. The objective of the OTHM Level 6 Diploma in Health and Social Care Management qualification is to equip learners with the underpinning knowledge, understanding and skills required for a career in the health and social care sector at a managerial level. The programme enables learners to demonstrate their skills by producing evidence from their work activities, to meet national occupational standards. Learners will acquire care management skills in the Health and Social Care sector. OTHM qualifications at RQF Level 6 represent practical knowledge, skills, capabilities and competences that are assessed in academic terms as being equivalent to Bachelor’s Degrees with Honours, Bachelor’s Degrees, Professional Graduate Certificate in Education (PGCE), Graduate Diplomas and Graduate Certificates. The Diploma in Occupational Health and Safety Management – Level 6 (Accredited by Eduqual, UK) is a qualification for aspiring health and safety professionals. It is aimed at learners who are responsible for developing and applying health and safety procedures day-to-day in an organisation. They are likely to be managers looking to improve their knowledge and skills.OTHM Level 6 Diploma in Occupational Health & safety in Islamabad, OTHM Level 6 Diploma in Occupational Health & safety in Rawalpindi, OTHM Level 6 Diploma in Occupational Health & safety in Gujranwala, OTHM Level 6 Diploma in Occupational Health & safety in Sialkot, OTHM Level 6 Diploma in Occupational Health & safety in Sargodha, OTHM Level 6 Diploma in Occupational Health & safety in Gujrat, OTHM Level 6 Diploma in Occupational Health & safety in Lahore, OTHM Level 6 Diploma in Occupational Health & safety in Faisalabad, OTHM Level 6 Diploma in Occupational Health & safety in Multan, OTHM Level 6 Diploma in Occupational Health & safety in Mandi Bahauddin, OTHM Level 6 Diploma in Occupational Health & safety in Bahawalpur, OTHM Level 6 Diploma in Occupational Health & safety in Attock, OTHM Level 6 Diploma in Occupational Health & safety in Chakwal, OTHM Level 6 Diploma in Occupational Health & safety in Mirpur, OTHM Level 6 Diploma in Occupational Health & safety in Bagh, OTHM Level 6 Diploma in Occupational Health & safety in Rawala kot, OTHM Level 6 Diploma in Occupational Health & safety in Kotli, OTHM Level 6 Diploma in Occupational Health & safety in Karachi, OTHM Level 6 Diploma in Occupational Health & safety in Hyderabad, OTHM Level 6 Diploma in Occupational Health & safety in Mardan, OTHM Level 6 Diploma in Occupational Health & safety in Peshawar, OTHM Level 6 Diploma in Occupational Health & safety in Swat, OTHM Level 6 Diploma in Occupational Health & safety in Rawat, OTHM Level 6 Diploma in Occupational Health & safety in Sawabi, OTHM Level 6 Diploma in Occupational Health & safety in Sahiwal, OTHM Level 6 Diploma in Occupational Health & safety in Sakkar, OTHM Level 6 Diploma in Occupational Health & safety in Haripur, OTHM Level 6 Diploma in Occupational Health & safety in Pakistan O3165643400, O3119903317,

Whatsapp: +923035530865, 03219606785, 3315145601, 03495021336 IPATS Government Recognized Education Zone-Khanna Pul Rawalpindi-Islamabad Professional Diploma In Occupational Health Safety and Environm (Two Years) Professional Diploma in Oncology (One Year) Professional Diploma in Opthalmology (One Year) Professional Diploma in Optician (One Year) Professional Diploma in Optician (Two Years) Professional Diploma In Organizational Psychology (Two Years) Professional Diploma In Organizational Psychology (Two Years) Professional Diploma in Orthopaedic Surgery (One Year) Whatsapp: +923035530865, 03219606785, 3315145601, 03495021336 IPATS Government Recognized Education Zone-Khanna Pul Rawalpindi-Islamabad Views: 3

The NEBOSH International General Certificate in Occupational Health and Safety (IGC) provides a broad understanding of health & safety issues and is an essential qualification for anyone working in or wanting to work in safety & health anywhere in the world. Candidates are assessed with an Open Book (Home-Based) examination for the first 4 elements and a practical work-based risk assessment for the elements 5 to 11. The open book assessment will begin by giving you a scenario. The scenario may go on to outline a developing situation, such as an incident or safety intervention. We will specify the maximum marks available for each to help you manage your time. These tasks will partially or entirely draw on the sign posts and evidence within the scenario. Answers therefore need to be relevant to the scenario and, in some cases, specific evidence will be required to support answers. As there is an expectation of more detail and reflection, you will be given 24 hours to research and complete the examination. This is a challenge that really tests your ability to interpret the scenario before answering the questions set using the knowledge gained through your General Certificate studies. You will be able to complete the assessment at home wherever you are in the world. Dependent on the specific scenario.

IPED INSTITUTE, Office 4, 1st floor Royal plaza, 6th road choak Rawalpindi Quality Assurances. Health, Safety, Environment. Civil Construction Manufacturing & Fabrication. Production, Maintenance Safety Management System H2S Safety Waste Management Safety Drain Water Safety Enviornment Protection Learning Objectives The objective of this course is to provide Guidelines, Give sound knowledge, comprehensive understanding, Committed professional skill, jobs standards and best practices of Occupational Health, Safety and environment Issues to delegate/ participant for implementation HSE plan effectively. Professionally acknowledge leadership skills to develop desired HSE culture in existing working environment to achieve the level of professional business satisfaction pro actively as under. Occupational Health Safety and Environment issues can be look after in an organization. Occupational Health, Safety and Environmental Hazards can be identified in existing working environment for risk assessment and to mitigate Risk by appropriate and corrective measure controls 3. Occupational Health, Safety and Environmental awareness developing in among employees in an organization to ensure safety culture. Views: 11

IPED- institute of professional education & development office#252, 2nd floor Umair plaza, 6th Road Rawalpindi Islamabad www.ipedpak.com www.ipedpk.com Safety officer course World Wide Acceptable with UK/USA/Pak/U.A.E International Certifications in Rawalpindi|Islamabad|Pakistan Islamabad, Rawalpindi,Lahore,Multan,Sahiwal,Karachi,Sialkot,Shakargar,Sawabi, Quetta,Pishwar,Sakhar,Faislabad,Fatta,Sargodha,Dena,Jehlum, Iped Institute,accredited with ENGLAND/USA/AUSTRALIA/UAE/TTB/SDC diploma/certificate courses, Best field experienced trainers also cheap & very smart feeses with hostals facility for best students in all over the world.Safety officer course World Wide Acceptable with UK/USA/Pak/U.A.E International Certifications.Safety/HSE/IOSH/OSH Courses,safety Supervisior/Safety Inspector/Technicians.Very Low fees.Fire safety Oil and Gas Safety courses in Rawalpindi|Islamabad|Pakistan Safety Officer Course|safety officer Training course|Safety Courses in Rawalpindi|Islamabad|Pakistan Construction Safety Environmetal Safety Fire Safety Oil & Gas Safety Safety Management System Electrical Safety Course Content Safety Officer Diploma Modules 1 Principal Legal Requirements Health And safety Management Reporting, Recording, and Investigation of Injuries ,Disease and Dangerous Occurrences Principles of Accident Prevention Human Factors. Ergonomic Stress at Work Occupational Diseases and Conditions First Aid Modules 2 Dangerous Substances Engineering safety Fire prevention Electrical Safety Structural Safety Construction and Contractors mechanical Handling The Working Environment Safety in Office, Workshops and in Catering Operations Course Duration One Year Program 3 Months Class 5 Days a Weeks Class Timing Evening & Morning Shift

Whatsapp: +923035530865, 03219606785, 3315145601, 03495021336 IPATS Government Recognized Education Zone-Khanna Pul Rawalpindi-Islamabad Professional Diploma In Occupational Health Safety and Environm (Two Years) Professional Diploma in Oncology (One Year) Professional Diploma in Opthalmology (One Year) Professional Diploma in Optician (One Year) Professional Diploma in Optician (Two Years) Professional Diploma In Organizational Psychology (Two Years) Professional Diploma In Organizational Psychology (Two Years) Professional Diploma in Orthopaedic Surgery (One Year) Whatsapp: +923035530865, 03219606785, 3315145601, 03495021336 IPATS Government Recognized Education Zone-Khanna Pul Rawalpindi-Islamabad Views: 98

OGS Skill Development and Trade Testing is a subsidiary training institute of OGS (Pvt) Limited, which is registered under the Government of Pakistan Act 1984, having Corporate Universal Identification No.0072054 and Registered from Uk accreditation system ISO 9001:2008 and Quality international study aboard network UK Ref No. QPK 2011010. We are facilitating our youth to make their prosperous future through technical education in the following sectors/fields for the last four years with the spirit of patriotism: Oil and Gas Drilling Petroleum Training Courses for Assistant Driller, Floor man, Derrick man, Roustabout, We are also conducting various safety courses like, NEBOSH, IOSH, OSHA and safety officer Diploma in Pakistan for oil and gas drilling petroleum industry. Our CEO has Good relations with different Oil and Gas companies’Human Resources Managers and Ownersr, he also knows un-employment factor in Pakistan. He knows that a lot of Engineers, Geologists, MBAs, Diploma holders and specially petroleum engineers of 1 year, 2 years, and 3 years diploma holders in the field of petroleum are un employed because there are rarer opportunities in the field of petroleum, but a lot of vacancies are being offered in the field DRILLING (Oil and Gas Sectors) you can search in Google as jobs drilling in Iraq, UAE Dubai Abu Dhabi, Saudi Arabia, Libya, Oman, Qatar, Nigeria, Sudan, Canada, UK and USA. “Who are Paying Highest Salaries in the World and further attraction 28 work 28 leave with ticket and other o lot of benefits So our short courses in the field drilling and safety may more benefited then 1 year’s petroleum engineering or long study and further our professional courses on International Level are designed for few days classes only. We are offering different courses for the industry of Oil and gas.

OGS Skill Development and Trade Testing is a subsidiary training institute of OGS (Pvt) Limited, which is registered under the Government of Pakistan Act 1984, having Corporate Universal Identification No.0072054 and Registered from United Kingdom accreditation system ISO 9001:2008 and Quality international study aboard network UK Ref No. QPK 2011010. We are facilitating our youth to make their prosperous future through technical education in the following sectors/fields for the last four years with the spirit of patriotism: Oil and Gas Drilling Petroleum Training Courses for Assistant Driller, Floor man, Derrick man, Roustabout, We are also conducting various safety courses like, NEBOSH, IOSH, OSHA and safety officer Diploma in Pakistan for oil and gas drilling petroleum industry. Our CEO has Good relations with different Oil and Gas companies’Human Resources Managers and Ownersr, he also knows un-employment factor in Pakistan. He knows that a lot of Engineers, Geologists, MBAs, Diploma holders and specially petroleum engineers of 1 year, 2 years, and 3 years diploma holders in the field of petroleum are un employed because there are rarer opportunities in the field of petroleum, but a lot of vacancies are being offered in the field DRILLING (Oil and Gas Sectors) you can search in Google as jobs drilling in Iraq, UAE Dubai Abu Dhabi, Saudi Arabia, Libya, Oman, Qatar, Nigeria, Sudan, Canada, UK and USA. “Who are Paying Highest Salaries in the World and further attraction 28 work 28 leave with ticket and other o lot of benefits So our short courses in the field drilling and safety may more benefited then 1 year’s petroleum engineering or long study and further our professional courses on International Level are designed for few days classes only. We are offering different courses for the industry of Oil & gas.

Othm Safety Level 6 Diploma for GradIosh in Islamabad, Othm Safety Level 6 Diploma for GradIosh in Rawalpindi, Othm Safety Level 6 Diploma for GradIosh in Gujranwala, Othm Safety Level 6 Diploma for GradIosh in Sialkot, Othm Safety Level 6 Diploma for GradIosh in Sargodha, Othm Safety Level 6 Diploma for GradIosh in Gujrat, Othm Safety Level 6 Diploma for GradIosh in Lahore, Othm Safety Level 6 Diploma for GradIosh in Faisalabad, Othm Safety Level 6 Diploma for GradIosh in Multan, Othm Safety Level 6 Diploma for GradIosh in Mandi Bahauddin, Othm Safety Level 6 Diploma for GradIosh in Bahawalpur, Othm Safety Level 6 Diploma for GradIosh in Attock, Othm Safety Level 6 Diploma for GradIosh in Chakwal, Othm Safety Level 6 Diploma for GradIosh in Mirpur, Othm Safety Level 6 Diploma for GradIosh in Bagh, Othm Safety Level 6 Diploma for GradIosh in Rawala kot, Othm Safety Level 6 Diploma for GradIosh in Kotli, Othm Safety Level 6 Diploma for GradIosh in Karachi, Othm Safety Level 6 Diploma for GradIosh in Hyderabad, Othm Safety Level 6 Diploma for GradIosh in Mardan, Othm Safety Level 6 Diploma for GradIosh in Peshawar, Othm Safety Level 6 Diploma for GradIosh in Swat, Othm Safety Level 6 Diploma for GradIosh in Rawat, Othm Safety Level 6 Diploma for GradIosh in Sawabi, Othm Safety Level 6 Diploma for GradIosh in Sahiwal, Othm Safety Level 6 Diploma for GradIosh in Sakkar, Othm Safety Level 6 Diploma for GradIosh in Haripur, Othm Safety Level 6 Diploma for GradIosh in Pakistan O3165643400, O3119903317,Othm Safety Level 6 Diploma for GradIosh in Islamabad, Pakistan O3165643400, O3119903317 The IEHSAS OTHM Level 6 Diploma Qualification in Occupational Health and Safety is designed to give Learners who have or are hoping to form into, a senior Position in an organization for overseeing health and safety policy and practice. Through this qualification, Learners will pick up the Core abilities and information to comprehend the Legal and administrative foundation to occupational health and safety policy, to have the option to assess policies, just as to suggest and execute strategy changes. Learners will create information and aptitudes and standards pertinent to the putting policy into practice, utilizing management systems, resources, occupational risk, and incident management. OTHM Level 6 Diploma in Occupational Health and Safety Qualification Structure: The IEHSAS OTHM Level 6 Diploma Qualification in Occupational Health and Safety consists of 6 mandatory units for combined total credits 48 hours, 480 hours Total Qualification Time and 180 Guided Learning Hours. All the units of this qualification also have a unique reference number of each unit. The qualification title and the reference numbers of each unit will appear on learners’ final certification documentation. There is no written exam at OTHM level 6 diploma in Occupational Health and Safety. Though there are 7 unit assignments. The learner must pass all unit assignments by demonstrating their professional portfolio and by research work with particular ranges of the word at paperwork. To ‘pass’ a unit, the learner must give evidence to show that they have satisfied all the learning outcomes and satisfy the guidelines indicated by all assessment criteria. Eligibility Criteria Unlike other Level 6 Diploma in Occupational Health and Safety, IDSE requires candidate to meet any of the following criteria for registration. The criteria have been established so that only competent professional may apply for IDSE to increase the success rate of the qualification. -Level 3 certification in OH&S (IOSH Accredited only) + 3 years OH&S experience, Or -A graduate degree in Science subjects from reputable university (60% score) + 1 years OH&S experience, Or -Four years engineering degree (B.E or BS Engg Min 60% aggregate) from a reputable university Exam Pattern IDSE is assessed via 2 closed book written exams ( Each units) comprising total 150 Marks in each exam. Time allowed for each examination is 5 hours. Note: There will be two sections in each exam i.e. Section A and Section B. Both section need to be completed the same day without any break in between. 10 Reasons your should prefer IDSE -It has 2 units assessed through 2 subjective type written exams (No reports/ Projects). -The contents of IDSE are more professional and skill oriented. -Assessments are more relevant and believe us, it will not be an English language test like other HSE Diploma do -Result within 15 working days after the exam and certificates within 15 working days after the result (in case you qualify) -You can sit both exam separately i.e. with a gap of 2 months to 12 months between both unit exams -You can opt to have exam date of your choice (You will need to confirm exam date by payment and 4 weeks prior to your date of choice) -IDSE fee package is much competitive than other HSE level 6 diploma -It is being offered in Distance Learning so you can study at your own pace. Our online trainer support will guide you whenever you will find any difficulty -It has eligibility criteria for registration. So all registered professional will meet the minimum eligibility criteria to ensure maximum pass rate for IDSE. -Diploma awarding body is NCFE UK which is an Ofqual regulated largest Certification Body with a history of more than 150 years IDSE Syllabus and Scheme of Assessment Unit 01 Achieving Continual Improvement in OH&S Management System 1.Assess the planning of an OH&S Management System from continual improvement perspective 1.1 Assess and evaluate the context of organization based on complexity of the processes and nature & scale of the organizations i.e. from small simple organizations to very large organizations with complex operations 1.2 Assess and review the OH&S policy for its effectiveness, continual improvement of OH&S MS and the alignment with strategic direction of the organization 1.3 Design an OH&S Management system with clear inputs and outputs using process approach to management system 1.4 Outline the key processes in the OH&S Management system 1.5 Assess the risks and opportunities inherent with the planning of an OH&S Management System from the organization’s context 1.6 Report on the effectiveness of planning an OH&S Management system 1.7 Investigate loopholes in the planning phase for the OH&S Management system 1.8 Justify the competence of personnel involved in the planning of an OH&S management system commensurate with nature and scale of the organization 1.9 Present a case for cost benefit analysis of an effective OH&S Management system to the top management 2 Assess the established & Implemented OH&S Management System from the continual improvement perspective 2.1 Identify and manage the resources for the implementation of an OH&S Management system 2.2 Review and evaluate the sufficiency and adequacy of documented procedures as per nature and scale of the organization 2.3 Outline the competencies requirements for the implementation of key processes of OH&S Management system 2.4 Present a case for the requirement of operational controls as required 2.5 Review and assess the requirement for maintaining & retaining documented information 2.6 Justify the implementation of an OH&S Management system in the organization from the health and safety culture perspective 2.7 Review the internal and external communications necessary for effective implementation of an OH&S Management system 2.8 Justify the arrangements necessary for complying with applicable legal and other requirements 2.9 Identify and report on risks and opportunities pertaining to implementation of an OH&S Management system 2.10 Evaluate the arrangements for control on subcontractors regarding OH&S Matters 2.11 Review and evaluate the established performance indicators for measuring the effectiveness of implementation 2.12 Justify the OH&S Objectives and goals commensurate with OH&S Policy 2.13 Compile a report on the utilization of resources for OH&S to be efficient and effective in view of continual improvement for an OH&S Management system 2.14 Evaluate and report the relevance of the implemented OH&S Management system with planned one 2.15 Report on the effectiveness of the implemented OH&S Management system 2.16 Review and evaluate the sufficiency and adequacy of the arrangements against potential emergency situations 3 Review and assess the efficiency and effectiveness of the inspection and audit process for OH&S Management System 3.1 Justify the frequency and type of inspections and audits (Internal & External) for the OH&S Management system in the context of organization 3.2 Review and assess the necessary competencies requirement for the personnel involved in inspections and audits 3.3 Manage the provisioning of effective training as per the complexity of processes and evaluate the effectiveness of imparted training 3.4 Evaluate the quality of inspections and audits 3.5 Present a case for the requirement of resources for inspections and audits 3.6 Review and assess the effectiveness of inspection/ audit criteria 3.7 Identify the requirements for any measuring and monitoring equipments including any calibration arrangements for OH&S Management system processes 3.8 Review and assess the risks pertaining to inspections and audits 3.9 Evaluate the arrangements to measure the degree of conformance of the OH&S Management system against the established criteria 3.10 Review and interpret the legal requirements and incorporate them into the organization’s inspection and audit process 3.11 Investigate the root causes for the non conformances/ incidents and suggest corrective actions 3.12 Review and assess the inspection and audit objectives and deliverables 3.13 Evaluate the arrangements for preventive actions in context of the organization 4 Review and assess the efficiency and effectiveness of Management Review process for the OH&S Management System 4.1 Review and evaluate the arrangements for analysis of the OH&S Management system performance 4.2 Review and evaluate the arrangements for evaluation of the OH&S Management system performance 4.3 Review and evaluate the quality and number of inputs for management review 4.4 Report on performance of the OH&S Management system to the top management 4.5 Present a case for the resource requirements to implement the decisions made by top management 4.6 Review and evaluate the requirements to change the OH&S management system and its possible implications 4.7 Manage the change in the OH&S Management system subsequent to Management review decisions 4.8 Report on progress of action plans for implementation of decisions subsequent to Management Review 4.9 Explain the OH&S Management system deliverables in context of continual improvement in quantified manner subsequent to decisions made in Management Review Unit 02 Principles and Application of Science and Technology in Safety 1 Assess and apply basic principles of Chemistry at the workplace for occupational health and safety 1.1 Evaluate the hazards due to the nature and form of chemical agents and suggest control measures from hierarchy of control perspective. This should include the transportation hazards associated with the chemical agents. 1.2 Explain the current developments in identification, measuring and monitoring and control of chemical agents at the workplace 1.3 Identify and interpret the legal requirements for use, storage and transportation of chemical agents 1.4 Explain the human physiology with natural immunity and defence mechanism against chemical agents 1.5 Identify the requirements and application of personal protective equipments in a chemical environment for sufficiency and adequacy including future design requirements of PPEs 1.6 Explain the features of an emergency preparedness and response procedure for accidents related to chemical agents 1.7 Identify the requirement of operational controls with clear direction to what and how should the human involvement be eliminated/ reduced 1.8 Outline the physio chemical hazards of inflammables at the workplaces 1.9 Present a case for the possibility for use of clean energy with cost benefit analysis and implications on occupational health and safety 2 Assess and apply basic principles of Physics at the workplace for occupational health and safety 2.1 Evaluate the hazards due to the physical properties of materials and suggest control measures from hierarchy of control perspective 2.2 Explain various forms of energy including the law of conservation of energy and their potential implications on health and safety at workplace 2.3 Explain Momentum, Inertia, Moment, Acceleration, Impulse, force, load, power, work, pressure, material stress, strain, heat, friction, Flow, Light, Noise, Vibration, and their significance from occupational health and safety perspective 2.4 Explain lever, pulley, screws, slope, wheels, pendulum and their significance from occupational health and safety perspective 2.5 Inspect & Evaluate a mechanical structure for its strength and durability in a given condition 2.6 Explain the human physiology with capabilities and capacities from an ergonomics perspective 3 Assess various inspection techniques and their applications for mechanical equipments 3.1 Explain current/ prevailing non destructive testing methods and their utility for ensuring safety of tools and equipments 3.2 Explain current/ prevailing destructive testing methods and their utility for ensuring the safety of tools and equipment 3.3 Identify and evaluate the cost benefit analysis and the frequency of inspections and testing of tools and equipments 3.4 Identify and justify the testing requirements for a bespoke designed product (Tools/ Equipments) 3.5 Review and identify the testing requirements for a refurbished/ modified product for occupational safety and health provisions 3.6 Justify the preference of an inspection method (From choice of prevailing NDT methods or any other prevailing destructive testing methods) over the others in a given environment for a specific work equipment etc. 3.7 Explain the reasons and contributory factors for material failures of tools, equipments or structures leading to unsafe conditions at the workplaces 3.8 Assess the risks of measurement uncertainty including the calibration frequency and its provisions 4 Assess the designs of tools, equipments or structures for their reliability for use in a given environment from an occupational health and safety perspective 4.1 Explain the common end user requirements for tools and equipments to be incorporated in design 4.2 Explain the role of a well designed tool, equipment or structure in occupational safety and health 4.3 Evaluate the design with respect to stated and implied use of tools, equipments and structures 4.4 Explain the design flaws which may compromise occupational safety and health at the workplaces 4.5 Explain the requirement of international standards of ASME (American Society of Mechanical engineers) in occupational safety and health from product design perspective 4.6 Explain the requirements of current/ prevailing design testing software and their implications on occupational health and safety provisions 4.7 Review a material failure investigation and suggest the design or any other changes 5 Assess the occupational health and safety risks from electricity at the workplaces 5.1 Explain the principle of electricity 5.2 Explain common terminology related to electricity including current (Alternating and Direct), resistance, voltage, single phase, 3 phase, circuits (Series and parallel), arcing, short circuiting. 5.3 Assess various electrical protection devices for their suitability of use in a specific work environment 5.4 Assess various electrical appliances for the risks to their users and other persons in varying work environments 5.5 Review and evaluate the sufficiency and adequacy of engineering controls against electricity hazards at the workplaces to ensure health and safety provisions 5.6 Analyze and evaluate the emergency preparedness and response procedure for its relevancy and completeness from electricity risks perspective 5.7 Evaluate the training and skill requirement by the workforce for safe use and maintenance of electrical appliances 5.8 Identify and assess prevailing electrical appliances and machinery being used in various industries with detailed hazards and risks in familiar and unfamiliar situations and environments. 5.9 Identify the potential risks of explosions from electrical appliances including any contributory factors which may give rise to the likelihood or severity 6 Assess the occupational health and safety risks from fire at the workplaces 6.1 Explain the principle of fire in context of fire initiation and propagation control 6.2 Identify type of raw materials being used at workplaces from fire propagation perspective 6.3 Justify the fire plan of the organization for its effectiveness with respect to its nature of work, size and context 6.4 Evaluate the emergency preparedness and response for potential fire occurrences within the workplaces due to the nature of work they carry out. 6.5 Review the organizational arrangements for controlling the fire spread and suggest the corrective actions 6.6 Explain common fire initiation causes in the organizations including the suitable control measures commensurate with nature, size and their context 6.7 Identify the current technologies being used across the globe for escape and rescue during fire and/ or other emergency situations and their use in specific workplaces 6.8 Outline the latest developments for fire extinguishing and their possible use in specific workplaces 6.9 Describe the training and skill requirements for emergency escape, fire control in specific organizations with varying nature and scope of work 6.10 Identify and interpret the legal requirements for safety arrangements against fire occurrences and how to incorporate them into organizational arrangements for compliance. 7 Assess the occupational health and safety risks from nuclear and other radiations hazards 7.1 Explain the principle of fission and fusion reactions in atomic power plants with emphasis on the requirements of occupational safety and health 7.2 Evaluate known type of radiations for their potential effects on OH&S 7.3 Explain the available engineering controls for containment of radiations and the limitation of their uses 7.4 Identify and interpret the applicable legal requirements for the exposure limits of various radiations 7.5 Explain the role of International Atomic Energy Agency (IAEA) regarding occupational safety and health against nuclear radiations 8 Assess the Biological health hazards at the workplace and the application of suitable controls 8.1 Explain common biological agents at the workplaces and the occupations which pose most risks 8.2 Assess the significance of health hazards due to presence of biological agents within the workplace 8.3 Justify the control measures commen.

The National Examination Board in Occupational Safety and Health (NEBOSH) is a UK-based independent examination board delivering vocational qualifications in health, safety and environmental practice and management. It was founded in 1979 and has charitable status.The National Examination Board in Occupational Safety and Health (NEBOSH) is a UK-based independent examination board delivering vocational qualifications in health, safety and environmental practice and management. It was founded in 1979 and has charitable status. Views: 5

Computer hardware software health safety english language engineering course For More Detail Please Visit Or Call Ch Rashid Sarwar Manager Emirates Institute Of Occupational Safety & Health (Lahore) Office# 7 Sec Floor Royal Arcade Ghazi Road Stop Main Feroz Pur Road, Lahore- Pakistan Tel: Fax: Cell: MULTAN CAMPUS: Emirates Institute Of Occupational Safety & Health (Multan) Office# 1 First Floor Shah Sons Medicines Chok Kumharan Wala Bodla Town Road Multan - Pakistan Tel: Fax: Cell:

BS OHSAS 18001 – Occupational Health and Safety - Gulshan, DHA Karachi Omni Academy - Gulshan, DHA Karachi Pakistan Call: 02134986664, 0312-2169325 #OMNI_ACADEMY #OMNIACADEMY_TRAINING - Gulshan, DHA Karachi Omni Academy - Gulshan, DHA Karachi Pakistan Call: 02134986664, 0312-2169325 #OMNI_ACADEMY #OMNIACADEMY_TRAINING Views: 1