Display module max dot

Module parameters: 1.A single module can drive an 8 * 8 common cathode lattice 2.Module Operating voltage: 5V. 3.Module size: 5 cm long X 3.2 cm wide X 1.5 cm high 4.With four screws hole, aperture 3mm, by using our M3 Tongzhu fixed 5.Module with input and output interfaces, supports multiple modules cascade

Product Description This is MAX Based Serial 8-Digit 7 Segment LED Display Module. Also Called LED Tube Display. It has an integrated serial input / output common-cathode display drivers, which connects the microprocessor and 8 digit 7-segment digital LED display. A convenient four-wire serial interface can connect all common microprocessor. Each data can be addressed in the update without rewriting all displays. MAX also allows the user to select each data encoding or no coding. The display also has a 150µA low-power shutdown mode, analog and digital brightness control, a scan-limit register allows the user to display 1-8 bit data. Technical Specifications No of Digits: 8 Power: 5V. Color: Green Interface Type: SPI, QSPI, MICROWIRE Serial Interface Maximum Clock: 10MHz Digit LED Color: Bright RED Cascading Ability: Can be chained or cascaded to drive unlimited units Display Driver: MAX Material: PCB + Electronic Components Size: mm

Product Description The matrix kit uses MAX display controller IC. It requires three data lines and two power lines It is easy to use and compatible with Arduino systems. The LED brightness adjustment can be implemented in software. The modules can be chained over serial interface to grow the display dimension according to your needs. Technical Specifications Operating Voltage VDC Typical Voltage 5V Operating Current 320mA Max Operating Current 2A LED Colour: Red Operating Temperature: 0 to 50C PCB Dimensions: 1.26in x 2.0in Overall height: 0.55 in 8×8 LED Matrix Size: 1.25in x 1.25in

Product Description This 16×2 character LCD module only uses 2 wire I2C interface. The I2C Interface Board is basically an IO expander board that helps minimize microcontroller / Arduino IO usage pin count. With this module, attached to the back of 16×2 character LCD Module, you can use only two pins (SDA and SCL) to write to LCD module. The typical operating voltage for these display modules is 5.0V. (The i2c backpack module can also be purchased separately. Please following this link) Technical Specifications Gross Weight (kg): Connection: Pin Header Display Format: 16×2 Character Outline Dimension: 80.0(W)x36.0(H)x11.5(T)mm Visual Area: mm Active Area: mm Character Size: mm Dot (Pixel) Size: mm Dot Pitch: mm IC Package: COB IC or Equivalent: AIP, HD, KS, SPLC780, ST Interface -bit Parallel, -bit Parallel Display Type: STN-LCD Blue Viewing Direction: 6:00 Appearance: White on Blue Backlight Color: White Color Backlight Current (Typ) 15mA Power Supply(Typ) 5V Supply Current for LCM (Max) uA Operating Temp -℃ Storage Temperature -℃

Product Description HD compatible 16×2 White on Blue LCD Module. The typical operating voltage for these display modules is 5.0V. Technical Specifications Gross Weight (kg): Connection: Pin Header Display Format: 16×2 Character Outline Dimension: 80.0(W)x36.0(H)x11.5(T)mm Visual Area: mm Active Area: mm Character Size: mm Dot (Pixel) Size: mm Dot Pitch: mm IC Package: COB IC or Equivalent: AIP, HD, KS, SPLC780, ST Interface -bit Parallel, -bit Parallel Display Type: STN-LCD Blue Viewing Direction: 6:00 Appearance: White on Blue Backlight Color: White Color Backlight Current (Typ) 15mA Power Supply(Typ) 5V Supply Current for LCM (Max) uA Operating Temp -℃ Storage Temperature -℃

A convenient four-wire serial interface can connect all common microprocessor. Each data can be addressed in the update does not overwrite all of the display. MAX7219 also allows the user to select each of the data code or not coded. The entire device includes a 150?A low-power shutdown mode, analogue and digital brightness control, a scan-limit register allows the user to 1-8 bits of data, there is a LED light so that all the detection mode. Requires only three IO ports can drive a dot! No flashing dot matrix display! Support cascade! Single module can drive a common cathode 8 * 8 dot matrix Module Operating voltage: 5V Module size: 5 cm X 3.2 cm wide X 1.5 cm high Views: 15

The Yamaha PSR-S650 boasts a newly-enhanced Style performance engine with MegaVoice technology for ultra-realistic instrumental Style backing - especially with guitar sounds. It also features FlashROM Expansion to load Expansion Packs containing new audio samples, Voices, Drum Kits and Styles, a great way to expand your creative possibilities. Voice & Style Expandability Thanks to Yamaha's new Voice & Style Expansion contents for the PSR, players can take advantage of a wide and ever-increasing selection of regional, ethnic and traditional Voices and Styles. Load them to your PSR and instantly play authentic sounds, rhythm and backing in the musical style of your choice! MegaVoice Technology Drawing on technology from the famous Tyros series, MegaVoice technology brings a new level of realism to the PSR-S650. The MegaVoices feature various playing articulations, techniques and performance sounds. For example, guitar MegaVoices can have hammer-on, slide and mute sounds to go along with soft, medium and loud sounds with strumming and fret noise, all at the same time. Put it all together in a Yamaha Guitar-Enhanced Style and enjoy some of the most astonishingly realistic, expressive accompaniment you've ever heard! Scale Tuning You can configure the keyboard's tuning to match the music you're playing with one of the nine preset custom tunings, like Arabic or Pythagorean - or by creating your own!. The PSR-S650 gives you all you need for performance and music creation. Order today! SPECIFICATIONS PSR-S-Key Arranger Workstation CONTROL INTERFACE Keyboard: Number of Keys: 61 Type: Organ Style Touch Response: Yes Pitch Bend: Yes Display: Display Type: Full Dot LCD Size: 320 x 240 dots Color: Monochrome Contrast: Yes Score Display Function: Yes Lyrics Display Function: Yes Language: English, Japanese Panel Language: English VOICES Tone Generation: Tone Generating Technology: AWM Stereo Sampling Number of Polyphony (Max.): 64 Preset Number of Voices: Drum/SFX Kits + 480 XG + GM2 (for GM2 Song playback) + GS (for GS Song playback) Featured Voices: 9 MegaVoices, 12 Sweet! Voices, 22 Cool! Voices, 18 Live! Voices Compatibility: XG: Yes GS: Yes GM: Yes GM2: Yes XF: Yes EXPANDABILITY Capacity: Voice: 16 MB Style & Voice Set: 820 KB Pack Installation: Yes EFFECTS Types: Reverb: 35 types Chorus: 44 types DSP: 237 types Master EQ: 5 Preset Functions: Dual/Layers: Yes Split: Yes Panel Sustain: Yes ACCOMPANIMENT STYLES Preset: Number of Preset Styles: 181 Fingering: Multi finger, Full Keyboard, AI Fingered Style Control: Intro x 3 Ending x3 Main x4 Fill In x 4 Custom: User Styles: Yes Style Creator: Yes Other Features: Music Database: 784 + External Files One-Touch Setting (OTS): 4 for Each Style SONGS Presets: Number of Preset Songs: 9 Recording: Number of Songs: 5 Number of Tracks: 16 Data Capacity: Approx. notes (when only "melody" tracks are recorded) Recording Function: Quick Recording, Multi Recording, Song Editing Compatible Data Format: Playback: SMF (Format 0 & 1), XF Recording: SMF (Format 0) FUNCTIONS Registration: Number of Buttons: 8 (x 8 Banks) Control: Freeze Demo/Help: Demonstration: Yes Overall Controls: Metronome: Yes Tempo Range: Transpose: Yes Tuning: Yes Octave Button: Yes Scale Type: Yes STORAGE AND CONNECTIVITY Storage: Internal Memory: KB External Drives: Optional USB flash Memory (via USB TO DEVICE) Connectivity: DC IN 16V Headphones: Yes Sustain Pedal: Yes USB To Device: Yes USB To Host: Yes Amplifiers and Speakers: Amplifiers: 12 W + 12 W Speakers: 12 cm x 2 + 3 cm x 2 Power Supply: PA-301 or equivalent (included) Power Consumption: 25W (When using PA- power adaptor) Auto Power-Off Function: Yes Color/Finish: Body Color: Black Size/Weight Dimensions: mm) W x mm) H x mm) D Weight: 16 lb., 1 oz. (7.3kg)

Display Monitor Type LCD Screen Size (Inches) 17 Flat Screen Dot Pitch (mm) Response Time (ms) 8 Dynamic Contrast Ratio Computer Interface D-Sub Signal Frequency Scanning Frequency Horizontal (Khz) 30kHz - 83kHz Scanning Frequency Vertical (Hz) 55Hz - 75Hz Power Management Operation (Watts) 45 W (Max) Dimensions Net Weight (Kgs) 4.6 HAFIZ TAYYAB HASSAN JUST 1 LINE HA BARIEK SI AP PIC ME DEKH SAKTY HAN PRICE IS FIXED

Display Monitor Type LCD Screen Size (Inches) 17 Flat Screen Dot Pitch (mm) Response Time (ms) 8 Dynamic Contrast Ratio Computer Interface D-Sub Signal Frequency Scanning Frequency Horizontal (Khz) 30kHz - 83kHz Scanning Frequency Vertical (Hz) 55Hz - 75Hz Power Management Operation (Watts) 45 W (Max) Dimensions Net Weight (Kgs) 4.6 HAFIZ TAYYAB HASSAN JUST 1 LINE HA BARIEK SI AP PIC ME DEKH SAKTY HAN PRICE IS FIXED Condition: - No Warranty

Display Monitor Type LCD Screen Size (Inches) 17 Flat Screen Dot Pitch (mm) Response Time (ms) 8 Dynamic Contrast Ratio Computer Interface D-Sub Signal Frequency Scanning Frequency Horizontal (Khz) 30kHz - 83kHz Scanning Frequency Vertical (Hz) 55Hz - 75Hz Power Management Operation (Watts) 45 W (Max) Dimensions Net Weight (Kgs) 4.6 HAFIZ TAYYAB HASSAN JUST 1 LINE HA BARIEK SI AP PIC ME DEKH SAKTY HAN PRICE IS FIXED

Price PK Rs.5000/- with free Shipping anywhere in Pakistan GSM Fixed Wireless Terminal GSM-8848 GSM-8848 is a GSM gateway communicator to transmit data through GSM. The communicator allows to connect PSTN landline alarm panels to GSM network. The main use of communicators is to inform the user or the CMS about an alarm in the protected premises. The alarm report can be transmitted via phone line or GSM network. The GSM-8848 Communicator offers an overall solution for the security areas where an easily configurable, reliable and intelligent GSM communication modem is required to support remote security centers. Reporting events to monitoring stations can be done over voice, SMS or GPRS. The GSM-8848 is an easy to add plug-in module that enables the system to communicate over the GPRS/GSM networks for reporting, control and programming. It can be used as the primary communication or as a back up for the IP or PSTN communications in case of communication failure. Fully replaces landline and transmits data to monitoring station if PSTN landline is unavailable or disconnected i.e. it Provides a simulated PSTN line, Switching to GSM network in case of a fall of the PSTN line. Could be used as a backup GSM connection too. This security signal transmitter device can be attached to the existing security elements (like alarm systems) to create a complete and reliable security system. It can be used either in security services, safety technology, remote control (gate opening) or online surveillance. The device can be easily integrated into the already existing systems, and provides service in places where it has not been possible before, thus offering new perspectives to our partners. It is able to transmit the compatible, standard alarm signals from the connected alarm center in Contact ID (CID) format to the remote security center. This way, the transmitting devices comprise a complete system with the installed and organized security or alarm centers. Thanks to the connection to the GSM/GPRS-based mobile communication network, and the transmission towards the surveillance center, this device guarantees is a highly reliable signaling solution. The communicator has easily understandable LCD/LED signals, and the configuration of the device does not require high level of expertise. Our device is equipped with overall remote management possibilities (remote configuration, software change), has additional security features, and guarantees constant availability and high reliability. It has a wide range of application areas and a wide choice of remote management functions, which – besides guaranteeing continuous availability – help increase the efficiency of the existing system. The GSM/GPRS module also supports two- way voice communication which is beneficial for elderly care, allowing two way communication with users in times of emergency. Application areas: Security alarm signal transmission Online surveillance Remote monitoring of existing alarm systems Signal transmission to the dispatcher center Monitoring of digital outputs (via SMS, voice, GPRS) Remote control (via SMS, voice, GPRS) Signal transmission of Elevator maintenance systems Usage for some Elderly- and patient care tasks For gate opening systems Features: GSM Dual/Quad-Band support. GSM 900MHz/1800MHz or GSM 850/900/1800/1900 MHz GSM FWT with LCD display and back up (Li-ion) battery Steady module and reliable design ensures good performance Can be used as a Primary, Backup or Standalone communicator Can be installed inside panel cabinet (no extra battery required) Compatible with most Alarm control panels like DSC, Honeywell, Bosch, Satel etc. PTM/ATS feature Intelligently monitors phone line and switches automatically to GSM network Reliable, fast ContactID communications via GSM (compatible with Sur-Gard® System II and System III receivers) Can translate Contact ID protocol to SMS text messages Flexible configuration software user interface Excellent voice quality and stability. Lightning proof and antistatic design Search network quickly, respond to dial swiftly With clear LCD display, could display signal density, date and time information Support caller ID and hand free Work with both normal SIM card and big size SIM card Preset IP access number and local call prefix numbers Accurate polarity reverse signal for billing is available and could work with billing meter. Compatible with PBX system for office use Block incoming and outgoing call numbers available Support lock phone, lock SIM card, inter-lock of the phone and SIM card Technical Specifications: GSM modem frequency: 850/900/1800/1900 MHz Power Supply Voltage: 9-15V DC 300mA max Current used in standby mode: 30mA max Dimensions: 210mm*135mm*45mm Operating Temperature: -35...+55°C Frequency stability>2.5 PPM Signal sensitivity: Antenna connector: SMA Antenna gain: 3.5dBi Condition: Brand New Price: PK Rs.5000/-. Shipping: FREE anywhere in Pakistan Contact Person: Adnan. ACEsystems www.ace-sys.com info@ace-sys.com Phone: 03343133286 Website http://www.ace-sys.com

This is an open-source code base and Simple i / o platform, and with the use of a similar java, C language development environment. So you can quickly use the language with Flash or Processing … and other software to make interactive works. Can be used to complete the development of electronic components such as Switch or Sensors or other controllers, LED, stepper motor or other output device. You can also operate independently as a software platform that can communicate with, for example, said: flash processing Max / MSP VVVV or other interactive software … to develop an open-source IDE interface is based on the principle that allows you to download free of charge to develop more surprising interactive work. 2009 UNO LENARDO 2560 controller seamlessly mainstream 4 -way LED indicator (LED indicator to know the importance, in the actual doing projects, with this indicator can be used directly working status LED indicates the procedure to facilitate debugging. DS18B20 temperature sensor interface that can be done to measure the temperature of the experiment, this price does not include the DS18B20 Oh, needed another shot. LM35 temperature sensor interface that can be done to measure the temperature of the experiment, this price does not include LM35 Oh, needed another shot. 3296 precision adjustable potentiometer, analog input port (can be used for controlling LED brightness, turn the steering angle, the digital voltage, etc.) integrated infrared receiver that can fit any infrared remote control experiments, the price also does not include the integrated receiver and needed another shot. four digital tube (using 74HC595 driver provincial IO learning SPI), you can do digital display experiment (can display temperature, voltage, counter value, etc.). three separate buttons, a reset button, the button can do experiments (HMI). the buzzer sound can be used for experiments. (Can call the police, pronunciation, etc.) Bluetooth, wireless interfaces, voice module, voice recognition module can be used for wireless communication experiment servo interface, easy to drive servos infrared detection interface, easy and infrared docking realization of human traffic statistics, etc Views: 5

This is an open-source code base and Simple i / o platform, and with the use of a similar java, C language development environment. So you can quickly use the language with Flash or Processing … and other software to make interactive works. Can be used to complete the development of electronic components such as Switch or Sensors or other controllers, LED, stepper motor or other output device. You can also operate independently as a software platform that can communicate with, for example, said: flash processing Max / MSP VVVV or other interactive software … to develop an open-source IDE interface is based on the principle that allows you to download free of charge to develop more surprising interactive work. 2009 UNO LENARDO 2560 controller seamlessly mainstream 4 -way LED indicator (LED indicator to know the importance, in the actual doing projects, with this indicator can be used directly working status LED indicates the procedure to facilitate debugging. DS18B20 temperature sensor interface that can be done to measure the temperature of the experiment, this price does not include the DS18B20 Oh, needed another shot. LM35 temperature sensor interface that can be done to measure the temperature of the experiment, this price does not include LM35 Oh, needed another shot. 3296 precision adjustable potentiometer, analog input port (can be used for controlling LED brightness, turn the steering angle, the digital voltage, etc.) integrated infrared receiver that can fit any infrared remote control experiments, the price also does not include the integrated receiver and needed another shot. four digital tube (using 74HC595 driver provincial IO learning SPI), you can do digital display experiment (can display temperature, voltage, counter value, etc.). three separate buttons, a reset button, the button can do experiments (HMI). the buzzer sound can be used for experiments. (Can call the police, pronunciation, etc.) Bluetooth, wireless interfaces, voice module, voice recognition module can be used for wireless communication experiment servo interface, easy to drive servos infrared detection interface, easy and infrared docking realization of human traffic statistics, etc. Views: 7

Dell Ultra Sharp UHM - 27 Inch Led Specification: ​Scan Size 27 inch Brightness 350 cd/m2 Contrast Ratio to 1 (typical), Dynamic Contrast Ratio: 2 Million:1 (Max) Display Type LED Resolution x Response Time 8ms Veiwing Angle 178° vertical / 178° horizontal Special 1 Dual Link Digital Visual Interface connectors (DVI-D) with HDCP 1 DisplayPort 1.2 (DP) 1 High Definition Multimedia Interface (HDMI) 1 Video Graphics Array (VGA) USB 3.0 Hi-Speed Hub (with 1 USB upstream port and 4 USB downstream ports) 1 Audio out DC power connector for Dell Soundbar (AX510) Weight 5.6 kg Warranty Duration: 1 Year HP international/local Warranty Claim Center: Karachi, Lahore,Islamabad or you can come to the Computer Point. NOTE: PRICES ARE SUBJECT TO CHANGE PLEASE VERIFY BY CALL OR FROM OUR WEBSITE COMPUTERPOINT(DOT)COM(DOT)PK Box Pack- Warranty: 1 Year

mage sensor Sensor Type CCD Image Sensor Effective Pixel Approx Megapixels Total Pixel Approx Megapixels Lens Focal Length Schneider Lens f= mm (35 mm Film Equivalent: mm) F No. F3.3(W) - F5.9(T) Optical Zoom 5X Optical Zoom Lens Digital Zoom Still Image Mode: 1 - 5X Image Stabilization Mode Dual IS (OIS + DIS) Display Type TFT LCD Type Size 3.0" Wide Size Feature cm) Pixels Display Focusing Type TTL auto focus Range Normal: 80 cm - Infinity(Wide) / 150cm - infinity (Tele), Macro: 5 - 80 cm (Wide) / cm (Tele), Auto Macro: 5 cm - Infinity (Wide) / 100 cm - Infinity (Tele) Shutter Speed Auto: sec / Program: sec / Night: sec / AEB,continuous: sec Exposure Control Program AE Metering System Metering: Center Weighted / Multi / Spot / Face Detection Compensation Compensation: ± 2 EV (1/3 EV Step) ISO Equivalent Auto / ISO Flash Mode Mode: Auto / Red-Eye / Fill-in / Slow Synch / Red-eye Fix Range Wide: m, Tele: m (ISO Auto) Recharging Time 4 sec Recharging Time White Balance Mode Mode: Auto WB / Cloudy / Custom / Daylight / Fluorescent_H / Fluorescent_L / Tungsten Still Image Mode Mode: Smart Auto / Program / Scene / 3D Photo / Live Panorama / Self Shot / Picture in Picture / Magic Frame / Funny Face / Smart Filter / Beauty Shot / Background Blur / Dual IS / Intelligent Portrait / Auto Zoom / Touch Shot / Pose Guide/ Night / Close-up Shot Smart Auto: Portrait / Night Portrait / Backlight Portrait / Macro Portrait / Backlight / Landscape / White / Action / Tripod / Night / Macro / Macro Text / Blue Sky / Sunset Sky / Macro Color / Natural Green, Scene: Landscape / Text / Sunset / Dawn / Backlight / Beach & Snow, Continuous: Single / Continuous / Motion Capture / AEB, Self-Timer: 10 sec / 2 sec / Double Image Play Single Image / Thumbnails / Multi Slide Show with music and effect / Movie Clip / Smart Album / Theme Album Date Imprinting Date&Time / Date / Off (User Selectable) Movie Clip Recording Voice: Mute, Sound Alive on, Sound Alive off, Recording Time (Max): 20 mins Size:X Optical Zoom) Frame Rate: 30 fps / 15 fps Effect Smart Filter: Miniature / Vignetting / Half Tone Dot / Sketch / Fish-eye / Classic / Retro / Palette Effect 1 / Palette Effect 2 / Palette Effect 3 / Palette Effect 4 Edit Still Image Capture / Time Trimming Movie Edit Storage Media Internal Memory: Approximatly 10MB / External Memory: MicroSD (Upto 2GB) / MicroSDHC (Upto 32GB) File Format File Format: DCF/ EXIF 2.21 / DPOF 1.1 / Pictbridge 1.0 / Still Image: JPEG(DCF) / MPO / Movie Clip: MP4 (Video: MPEG-4.AVC/H.264, Audio:AAC) Image Size 16 M: MP: MW: x M: x M: x M: x MW: M: Interface Digital Output Connector USB 2.0 (Hi-Speed) Interface Audio Microphone: Mono / Internal Speaker: Mono Video Output AV: NTSC / PAL (User Selectable) HDMI 1.3: NTSC / PAL (User Selectable) DC Power Input DC Power Input: 5 V Power Power Source Type Rechargeable Battery: BP-70A (3.7 V,740mAh, Min 700mAh) / Connector Type: Micro-USB Physical Dimension Dimension (W×H×D) mm (without protrusions) Specifications Weight 121 g (without Battery and Memory Card) Operating Temperature 0 - 40 °C Operating Temperature Operating Humidity 5 - 85 % Operating Humidity S/W and PC OS Bundle PC S/W Built-in PC Software included Compatible OS Compatible OS: Windows XP SP2 / Vista / Windows 7 System Requirement in General For Macintosh Power Mac G3 or later / Mac OS 10.4 or later / 256 MB (Min) RAM (512 MB or more Recommended) / 110 MB (Min) of available Hard-Disk Space / USB Port / CD-ROM Drive For Windows PC with Processor Better than Intel Pentium IV 3.2 GHz / AMD Athlon FX 2.6 GHz or higher / Windows XP / Vista / MB (Min) RAM (1 GB or more Recommended) / 250 MB of available Hard Disk Space (1 GB or more Recommended) / USB Port / CD-ROM Drive / P / 16 bit Color Display Compatible Monitor (24 bit Color Display Recommended) / Microsoft Direct X 9.0c or later Box Pack - No Warranty