Bluetooth serial module

Product Description Description HC-06 wireless Bluetooth serial pass through transceiver module can be used for replacing RS232 cable between a microcontroller and PC. The module also can be used for connecting the Cell Phones with Bluetooth Peripheral to Embedded Boards or Machines using standard Bluetooth SPP Profile. Usage Default serial port setting: , N, 8, 1 Pairing code: Running in slave role: Pair with BT dongle and master module Applications Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. Computer and peripheral devices GPS receiver Industrial control MCU projects Pinout KEY: according to the data sheet, pull-up this pin while power-on-reset of the module to enforce AT mode. VCC is indicated in the range of 3.6V-6V. GND: Ground TXD: serial output of the module, to be connected to RX of the microcontroller. Note that this signal is using 3.3V logic level RXD: serial input of the module, to be connected to the TX of the microcontroller. Note that this signal is using 3.3V logic levels. STATE: connected to LED2 (Pin32) of the module, Related Information: Supported Android Apps The HC-06 although supports several android applications but following is a list of applications that were tested to work with this module: microController Arduino Bluetooth Please visit our website for more details.

Features: Operating voltage: 3.3V Working current: matching for 30 MA, matching the communication for 8 MA. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards. Potter default rate of , the user can be set up. With computer and bluetooth, bluetooth adapter, PDA, seamless connection equipment. Dormancy current: no dormancy. Input power supply 3.3~6V, Prohibit more than 7V. Commercial Series: Bluetooth module board Series With LED indicator light, use 150mA and 3.3V regulation chip. With VCC, GND, TXD, RXD foot for the Bluetooth With ""Re-search"" button (ON/OFF/WAKE foot for it, external MCU out input ""High level"" can control module to re-search) Compatible with bluetooth master module"", slave module"" or master-slave (whole) module. Allows your device to both send or receive the TTL data via Bluetooth technology without connecting a serial cable to your computer. No ""Automatically prevent power supply peversing func"", so please correctly connect power supply Box Pack - No Warranty

Features: Operating voltage: 3.3V Working current: matching for 30 MA, matching the communication for 8 MA. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards. Potter default rate of , the user can be set up. With computer and bluetooth, bluetooth adapter, PDA, seamless connection equipment. Dormancy current: no dormancy. Input power supply 3.3-6V, Prohibit more than 7V. Commercial Series: Bluetooth module board Series With LED indicator light, use 150mA and 3.3V regulation chip. With VCC, GND, TXD, RXD foot for the Bluetooth With Re-search button ON/OFF/WAKE foot for it, external MCU out input High level can control module to re-search Compatible with bluetooth master module, slave module or master-slave whole module. Allows your device to both send or receive the TTL data via Bluetooth technology without connecting a serial cable to your computer. No Automatically prevent power supply peversing func, so please correctly connect power supply" Facebook page;ElectronicsArena.com Box Pack - No Warranty

Features: Operating voltage: 3.3V Working current: matching for 30 MA, matching the communication for 8 MA. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards. Potter default rate of , the user can be set up. With computer and bluetooth, bluetooth adapter, PDA, seamless connection equipment. Dormancy current: no dormancy. Input power supply 3.3-6V, Prohibit more than 7V. Commercial Series: Bluetooth module board Series With LED indicator light, use 150mA and 3.3V regulation chip. With VCC, GND, TXD, RXD foot for the Bluetooth With Re-search button ON/OFF/WAKE foot for it, external MCU out input High level can control module to re-search Compatible with bluetooth master module, slave module or master-slave whole module. Allows your device to both send or receive the TTL data via Bluetooth technology without connecting a serial cable to your computer. No Automatically prevent power supply peversing func, so please correctly connect power supply" Facebook page;ElectronicsArena.com

features: operating voltage: 3.3v working current: matching for 30 ma, matching the communication for 8 ma. use the csr mainstream bluetooth chip, bluetooth v2.0 protocol standards. potter default rate of , the user can be set up. with computer and bluetooth, bluetooth adapter, pda, seamless connection equipment. dormancy current: no dormancy. input power supply 3.3 6v, prohibit more than 7v. commercial series: bluetooth module board series with led indicator light, use 150ma and 3.3v regulation chip. with vcc, gnd, txd, rxd foot for the bluetooth with re search button on off wake foot for it, external mcu out input high level can control module to re search compatible with bluetooth master module, slave module or master slave whole module. allows your device to both send or receive the ttl data via bluetooth technology without connecting a serial cable to your computer. no automatically prevent power supply peversing func, so please correctly connect power supply" Box Pack - No Warranty

Features Operating voltage 3.3V Working current matching for 30 MA, matching the communication for 8 MA. Use the CSR mainstream bluetooth chip, bluetooth V2.0 protocol standards. Potter default rate of , the user can be set up. With computer and bluetooth, bluetooth adapter, PDA, seamless connection equipment. Dormancy current no dormancy. Input power supply 3.36V, Prohibit more than 7V. Commercial Series Bluetooth module board Series With LED indicator light, use 150mA and 3.3V regulation chip. With VCC, GND, TXD, RXD foot for the Bluetooth With Re-search button ONOFFWAKE foot for it, external MCU out input High level can control module to re-search Compatible with bluetooth master module, slave module or master-slave whole module. Allows your device to both send or receive the TTL data via Bluetooth technology without connecting a serial cable to your computer. No Automatically prevent power supply peversing Box Pack - No Warranty

features operating voltage 3.3v working current matching for 30 ma, matching the communication for 8 ma. use the csr mainstream bluetooth chip, bluetooth v2.0 protocol standards. potter default rate of , the user can be set up. with computer and bluetooth, bluetooth adapter, pda, seamless connection equipment. dormancy current no dormancy. input power supply 3.3 6v, prohibit more than 7v. commercial series bluetooth module board series with led indicator light, use 150ma and 3.3v regulation chip. with vcc, gnd, txd, rxd foot for the bluetooth with re search button on off wake foot for it, external mcu out input high level can control module to re search compatible with bluetooth master module, slave module or master slave whole module. allows your device to both send or receive the ttl data via bluetooth technology without connecting a serial cable to your computer. no automatically prevent power supply peversing func, so please correctly

features operating voltage 3.3v working current matching for 30 ma, matching the communication for 8 ma. use the csr mainstream bluetooth chip, bluetooth v2.0 protocol standards. potter default rate of 9600, the user can be set up. with computer and bluetooth, bluetooth adapter, pda, seamless connection equipment. dormancy current no dormancy. input power supply 3.3 6v, prohibit more than 7v. commercial series bluetooth module board series with led indicator light, use 150ma and 3.3v regulation chip. with vcc, gnd, txd, rxd foot for the bluetooth with re search button on off wake foot for it, external mcu out input high level can control module to re search compatible with bluetooth master module, slave module or master slave whole module. allows your device to both send or receive the ttl data via bluetooth technology without connecting a serial

Mainstream CSR Bluetooth chip, Bluetooth V2.0 protocol standards *serial module operating voltage 3.3V. * the baud rate can be set user * core module size: 28mm x 15 mm x 2.35mm. * Operating Current: power input is terminated with a resistance of 5 ohms, use a multimeter to test a variety of state power of the line... more detail given below For more detail about prducts please contact us on: Engr.Sajid Zaman Our Office address is: Office# FF-753, Deans Trade Center Peshawar Cantt. Our website also available please contact us for the website address through SMS. Thank you!

Wireless serial Bluetooth port with free extension cable Core Modules using HC-07 slave modules,leads from the module interface including VCC, GND, TXD, RXD. Reserve LED output pin status,Single Chip Microcomputer can be judged connected or not by the foot state,KEY pin is invalid for slave. LED indicate show connection status,when it is flashing means non-connection, normally on mean it connect successfully Backplane set anti-reverse diode with 3.3V LDO, input voltage: 3.6~​​6V, Unpaired current: about 30 MA, Paired: about 10 MA, input voltage cann't exceed 7V Interface level 3.3V, can be directly connected the various SCM (51, AVR, PIC, ARM, MSP430, etc.), the microcontroller can also be directly connected without MAX232 Effective distance: 10M After repaired,can used as full-duplex serial,supports 8 data bits, 1 stop bit, no parity communication format Easy to connect this module with any standard Bluetooth device, just search and key """" passcode. Running in slave role: Pair with BT dongle and master module,Simply establish connection between device with bluetooth function GPS, PC,PDA,PSP phone,Industrial control,etc. Box Open - Never Used - No Warranty

Wireless serial Bluetooth port with free extension cable Core Modules using HC-07 slave modules,leads from the module interface including VCC, GND, TXD, RXD. Reserve LED output pin status,Single Chip Microcomputer can be judged connected or not by the foot state,KEY pin is invalid for slave. LED indicate show connection status,when it is flashing means non-connection, normally on mean it connect successfully Backplane set anti-reverse diode with 3.3V LDO, input voltage: 3.6-6V, Unpaired current: about 30 MA, Paired: about 10 MA, input voltage cann't exceed 7V Interface level 3.3V, can be directly connected the various SCM, the microcontroller can also be directly connected without MAX232 Effective distance: 10M After repaired,can used as full-duplex serial,supports 8 data bits, 1 stop bit, no parity communication format Easy to connect this module with any standard Bluetooth device, just search and key """" passcode. Running in slave role: Pair with BT dongle and master module,Simply establish connection between device with bluetooth function GPS, PC,PDA,PSP phone,Industrial control,etc. " Facebook page;ElectronicsArena.com Box Pack - No Warranty

Wireless serial Bluetooth port with free extension cable Core Modules using HC-07 slave modules,leads from the module interface including VCC, GND, TXD, RXD. Reserve LED output pin status,Single Chip Microcomputer can be judged connected or not by the foot state,KEY pin is invalid for slave. LED indicate show connection status,when it is flashing means non-connection, normally on mean it connect successfully Backplane set anti-reverse diode with 3.3V LDO, input voltage: 3.6-6V, Unpaired current: about 30 MA, Paired: about 10 MA, input voltage cann't exceed 7V Interface level 3.3V, can be directly connected the various SCM, the microcontroller can also be directly connected without MAX232 Effective distance: 10M After repaired,can used as full-duplex serial,supports 8 data bits, 1 stop bit, no parity communication format Easy to connect this module with any standard Bluetooth device, just search and key """" passcode. Running in slave role: Pair with BT dongle and master module,Simply establish connection between device with bluetooth function GPS, PC,PDA,PSP phone,Industrial control,etc. " Facebook page;ElectronicsArena.com

Wireless serial Bluetooth port with free extension cable Core Modules using HC-07 slave modules,leads from the module interface including VCC, GND, TXD, RXD. Reserve LED output pin status,Single Chip Microcomputer can be judged connected or not by the foot state,KEY pin is invalid for slave. LED indicate show connection status,when it is flashing means non-connection, normally on mean it connect successfully Backplane set anti-reverse diode with 3.3V LDO, input voltage: 3.6-6V, Unpaired current: about 30 MA, Paired: about 10 MA, input voltage cann't exceed 7V Interface level 3.3V, can be directly connected the various SCM, the microcontroller can also be directly connected without MAX232 Effective distance: 10M After repaired,can used as full-duplex serial,supports 8 data bits, 1 stop bit, no parity communication format Easy to connect this module with any standard Bluetooth device, just search and key """" passcode. Running in slave role: Pair with BT dongle and master module,Simply establish connection between device with bluetooth function GPS, PC,PDA,PSP phone,Industrial control,etc. "

Wireless serial Bluetooth port with free extension cable Core Modules using HC-07 slave modules,leads from the module interface including VCC, GND, TXD, RXD Reserve LED output pin status,Single Chip Microcomputer can be judged connected or not by the foot state,KEY pin is invalid for slave LED indicate show connection status,when it is flashing means non-connection, normally on mean it connect successfully Backplane set anti-reverse diode with 3 3V LDO, input voltage: 3 6-6V, Unpaired current: about 30 MA, Paired: about 10 MA, input voltage cann't exceed 7V Interface level 3 3V, can be directly connected the various SCM, the microcontroller can also be directly connected without MAX232 Effective distance: 10M After repaired,can used as full-duplex serial,supports 8 data bits, 1 stop bit, no parity communication format Easy to connect this module with any standard Bluetooth device, just search and key """" passcode Running in slave role: Pair with BT dongle and master module,Simply establish connection between device with bluetooth function GPS, PC,PDA,PSP phone,Industrial control,etc " Box Pack - No Warranty

wireless serial bluetooth port with free extension cable core modules using hc 07 slave modules,leads from the module interface including vcc, gnd, txd, rxd. reserve led output pin status,single chip microcomputer can be judged connected or not by the foot state,key pin is invalid for slave. led indicate show connection status,when it is flashing means non connection, normally on mean it connect successfully backplane set anti reverse diode with 3.3v ldo, input voltage: 3.6 6v, unpaired current: about 30 ma, paired: about 10 ma, input voltage cann t exceed 7v interface level 3.3v, can be directly connected the various scm 51, avr, pic, arm, msp430, etc., the microcontroller can also be directly connected without max232 effective distance: 10m after repaired,can used as full duplex serial,supports 8 data bits, 1 stop bit, no parity communication format easy to connect this module with any standard bluetooth device, just search and key passcode. running in slave role: pair with bt dongle and master module,simply establish connection between device with bluetooth function gps, pc,pda,psp phone,industrial control,etc. " Box Pack - No Warranty

wireless serial bluetooth port with free extension cable core modules using hc 07 slave modules,leads from the module interface including vcc, gnd, txd, rxd. reserve led output pin status,single chip microcomputer can be judged connected or not by the foot state,key pin is invalid for slave. led indicate show connection status,when it is flashing means non connection, normally on mean it connect successfully backplane set anti reverse diode with 3.3v ldo, input voltage 3.6 6v, unpaired current about 30 ma, paired about 10 ma, input voltage cann t exceed 7v interface level 3.3v, can be directly connected the various scm 51, avr, pic, arm, msp430, etc., the microcontroller can also be directly connected without max232 effective distance 10m after repaired,can used as full duplex serial,supports 8 data bits, 1 stop bit, no parity communication format easy to connect this module with any standard bluetooth device, just search and key Box Pack - No Warranty

wireless serial bluetooth port with free extension cable core modules using hc 07 slave modules,leads from the module interface including vcc, gnd, txd, rxd. reserve led output pin status,single chip microcomputer can be judged connected or not by the foot state,key pin is invalid for slave. led indicate show connection status,when it is flashing means non connection, normally on mean it connect successfully backplane set anti reverse diode with 3.3v ldo, input voltage 3.6 6v, unpaired current about 30 ma, paired about 10 ma, input voltage cann t exceed 7v interface level 3.3v, can be directly connected the various scm 51, avr, pic, arm, msp430, etc., the microcontroller can also be directly connected without max232 effective distance 10m after repaired,can used as full duplex serial,supports 8 data bits, 1 stop bit, no parity communication format easy to connect this module with any standard bluetooth device, just s

Wireless serial Bluetooth port with free extension cable Core Modules using HC-07 slave modules,leads from the module interface including VCC, GND, TXD, RXD. Reserve LED output pin status,Single Chip Microcomputer can be judged connected or not by the foot state,KEY pin is invalid for slave. LED indicate show connection status,when it is flashing means non-connection, normally on mean it connect successfully Backplane set anti-reverse diode with 3.3V LDO, input voltage 3.66V, Unpaired current about 30 MA, Paired about 10 MA, input voltage cannt exceed 7V Interface level 3.3V, can be directly connected the various SCM 51, AVR, PIC, ARM, MSP430, etc., the microcontroller can also be directly connected without MAX232 Effective distance 10M After repaired,can used as full-duplex serial,supports 8 data bits, 1 stop bit, no parity communication format Box Pack - No Warranty

wireless serial bluetooth port with free extension cable core modules using hc 07 slave modules,leads from the module interface including vcc, gnd, txd, rxd. reserve led output pin status,single chip microcomputer can be judged connected or not by the foot state,key pin is invalid for slave. led indicate show connection status,when it is flashing means non connection, normally on mean it connect successfully backplane set anti reverse diode with 3.3v ldo, input voltage 3.6 6v, unpaired current about 30 ma, paired about 10 ma, input voltage cann t exceed 7v interface level 3.3v, can be directly connected the various scm 51, avr, pic, arm, msp430, etc., the microcontroller can also be directly connected without max232 Box Pack - No Warranty

​WRL-12577 Original SparkFun The BlueSMiRF Silver is the latest Bluetoothwireless serial cable replacement from SparkFun Electronics! This version of the popular BlueSMiRF uses the RN-42 module which has a bit less range than the RN-41 module used in the BlueSMiRF Gold. These modems work as a serial (RX/TX) pipe. Any serial stream from 2400 to 115200bps can be passed seamlessly from your computer to your target. Now Buy Online Shipping All Across Pakistan COMPANY: MATRIX ELECTRONICS CONTACT PERSON: FAIZAN MUNIR Mobile:03002785860 www.matrixelectronic.com Email : sales@matrixelectronic.com Email : info@matrixelectronic.com