5v lithium battery

features: 1. charge module linear charging. 2. current 1a adjustable. 3. charge precision 1.5 percent. 4. input voltage 4.5v 5.5v. 5. full charge voltage 4.2v. 6. led indicator red is charging green is full charged. 7. input interface micro usb. 8. work temperature 10? to plus 85?. 9. inversed polarity no. 10.size small to 25x19x10mm.

features: 1. charge module linear charging. 2. current 1a adjustable. 3. charge precision 1.5 percent. 4. input voltage 4.5v 5.5v. 5. full charge voltage 4.2v. 6. led indicator red is charging green is full charged. 7. input interface micro usb. 8. work temperature 10? to plus 85?. 9. inversed polarity no. 10.size small to 25x19x10mm. " Box Pack - No Warranty

Features: 1. Charge module- Linear charging. 2. Current- 1A adjustable. 3. Charge precision- 1.5%. 4. Input voltage- 4.5V-5.5V. 5. Full charge voltage- 4.2V. 6. Led indicator- red is charging Green is full charged. 7. Input interface- micro USB. 8. Work temperature- -10? to +85?. 9. Inversed polarity- NO. 10.Size- small to 25X19X10mm. " Box Pack - No Warranty

Features: 1. Charge module- Linear charging. 2. Current- 1A adjustable. 3. Charge precision- 1.5%. 4. Input voltage- 4.5V-5.5V. 5. Full charge voltage- 4.2V. 6. Led indicator- red is charging Green is full charged. 7. Input interface- micro USB. 8. Work temperature- -10? to +85?. 9. Inversed polarity- NO. 10.Size- small to 25X19X10mm. Box Open - Never Used - No Warranty

Features: 1. Charge module- Linear charging. 2. Current- 1A adjustable. 3. Charge precision- 1.5 percent 4. Input voltage- 4.5V-5.5V. 5. Full charge voltage- 4.2V. 6. Led indicator- red is charging Green is full charged. 7. Input interface- micro USB. 8. Work temperature- -10? to +85?. 9. Inversed polarity- NO. 10.Size- small to 25X19X10mm." Facebook page;ElectronicsArena.com Box Pack - No Warranty

Features: 1. Charge module- Linear charging. 2. Current- 1A adjustable. 3. Charge precision- 1.5 percent 4. Input voltage- 4.5V-5.5V. 5. Full charge voltage- 4.2V. 6. Led indicator- red is charging Green is full charged. 7. Input interface- micro USB. 8. Work temperature- -10? to +85?. 9. Inversed polarity- NO. 10.Size- small to 25X19X10mm." Facebook page;ElectronicsArena.com

Features: 1. Charge module- Linear charging. 2. Current- 1A adjustable. 3. Charge precision- 1.5 percent 4. Input voltage- 4.5V-5.5V. 5. Full charge voltage- 4.2V. 6. Led indicator- red is charging Green is full charged. 7. Input interface- micro USB. 8. Work temperature- -10? to +85?. 9. Inversed polarity- NO. 10.Size- small to 25X19X10mm." Box Pack - No Warranty

Features 1. Charge module- Linear charging. 2. Current- 1A adjustable. 3. Charge precision- 1.5. 4. Input voltage- 4.5V-5.5V. 5. Full charge voltage- 4.2V. 6. Led indicator- red is charging Green is full charged. 7. Input interface- micro USB. 8. Work temperature- -10 to 85. 9. Inversed polarity- NO. 10.Size- small to 25X19X10mm. Box Pack - No Warranty

Module name: 3S 12.6V Li-ion Lithium Battery 18650 Charger Protection Board Suitable range: For nominal voltage 3.6V 3.7V lithium battery(Including 18650,26650, lithium polymer batteries) Charging voltage: 12.6V Maximum output current: 20A Maximum output power / charging power: 252W Color: green material: plastic Product size:59*20*3.4mm Product weight: 4.4g Package Contents: 1 PCS x 3 string 12.6V 20A 18650 lithium battery protection board Precautions: 1.Strictly according to the diagram wiring: 0V/4.2V/8.4V/12.6V,Otherwise it will cause damage to the chip. 2.After connection,it need to first charge activation, then will have the output.

Product Name: 3 string 12.6V 40A lithium battery protection board Charging voltage: DC 12.6V~13.6V Continuous discharge current: 40A maximum (if the heat dissipation environment is not good, please reduce the load current) Continuous charging current: up to 20A Balance Version Product size: 41*61*4mm Enhance Version Product size: 41*55*4mm Applicable choice: applicable to the nominal voltage of 3.7V, fully charged 4.2V lithium battery (including 18650, 26650, polymer lithium battery), can be drilled below 170W

Manage the constant current to constant voltage charging of a connected lithium battery Over-discharge protection - keeps your battery from being discharged below 2.4V, a healthy minimum voltage level for your batteryIf a connected battery has been discharged below 2.4V the module will cut output power from the battery until the battery voltage has been re-charged above 3.0V (the over-discharge release voltage), which at that time the module will again allow discharge of power from the battery to a connected load. Although the module cuts output power from the battery during an over-discharge situation, it still allows charging of the battery to occur through the parasitic diode of the discharge control MOSFET (FS8205A Dual MOSFET). Overcharge protection - the module will safely charge your battery to 4.2V Overcurrent and short-circuit protection - the module will cut the output from the battery if the discharge rate exceeds 3A or if a short-circuit condition occurs Soft-start protection limits inrush current Trickle charge (battery reconditioning) - if the voltage level of the connected battery is less than 2.9V, the module will use a trickle charge current of 130mA until the battery voltage reaches 2.9V, at which point the charge current will be linearly increased to the configured charge current.

100% New and High Quality Micro USB TP4056 Dual Charging Module Input Voltage: 4.35V - 6V (recommended voltage 5v) Chargingcut-off Voltage: 4.2V (± 1%) Maximum Charging Current Output: 1000mA (1A) Battery Discharge Protection Voltage: 3.0V Charging Status LEDs:Red LED Charging, Green LED Fully Charged Note: The installation and usgae of these modules require some basic knowledge of electronics, if you dont know how to install, please don't buy it.

The input voltage: 4.35-6 v (recommended voltage 5 v) Charge cut-off voltage: 4.2 V + / – 1% Maximum charging current output: 1000 ma The battery overcharge protection voltage: 4.28 V Battery overcharge lifting voltage: 4.00 V The battery discharge protection voltage: 3.0 V Battery discharge termination voltage: 3.2 V Battery: over-current protection current 3 a The board size: about 2.5 * 1.65 CM Light state: no load the light not bright, red light for recharging, is full of green light.

The input voltage: 4.35-6 v (recommended voltage 5 v) Charge cut-off voltage: 4.2 V + / - 1% Maximum charging current output: 1000 ma The battery overcharge protection voltage: 4.28 V Battery overcharge lifting voltage: 4.00 V The battery discharge protection voltage: 3.0 V Battery discharge termination voltage: 3.2 V Battery: over-current protection current 3 a The board size: about 2.5 * 1.65 CM Light state: no load the light not bright, red light for recharging, is full of green light.

Maxell lithium battery CR price = 200 Energizer lithium battery CR price= 450 Energizer lithium batteryCR price=350 Camelion lithium battery CR price=350 Timing Energizer lithium battery CR to 90 hours Energizer lithium battery CR to 50 hours Camelion lithium battery CR to 50 hours Maxell lithium battery CR to 60 hours Also compatible for car remotes, calculators and other electronics fix price no bargaining plz Box Pack - No Warranty